howdy
i'm a puppy newbie running 3.01 and trying to get dialup working. i've tried various modem search techniques uncovered in this forum, including wvdialshell. all attempts come back with no device found. references to 'www.worldvisions.ca/wvdial/' do not seem to work (no such page).
the modem works in Win XP Prof, and i have logged control panel info below (+ + + + + to _ _ _ _ _).
on the forum i saw a Dec'07 start of a list of Win Modems that work with puppy, but only one modem was listed.
Q1. Is the Manuf code 'CXT' for Connexant?
Q2. Are all Connexant modems 'Win' modems?
Q3. The system has a Dell Rambus m/b, about 5 yrs old. Might puppy 4.00 detect this modem?
Q4. Any suggestions on what to try next?
thanks for your help,
bene
+ + + + +
tab=Modems
tab=General
Modem : SoftV90 Voice Speakerphone Modem COM3
<Properties>
Manuf: CXT
Location: PCI Slot 2 (PCI bus 2, device 8, function 0)
...working...
...(enable)
tab=Modem
...volume = On (max)
Max Port Speed = 115200
Dial Control = Wait for dial tone before dialing
tab=Diagnostics
Modem Information
Hardware ID : PCI\VEN_14F1&DEV_2016&SUBSYS_021913E0&REV_01
Query Modem
ATQ0V1E0 Success
AT+GMM +GMM: Soft90 Voice Speakerphone Modem
AT+FCLASS=? 0,1,8,80
AT#CLS=? COMMAND NOT SUPPORTED
AT+GCI? +GCI: B5
AT+GCI=? +GCI: (00,01,02,03,04,05,06,07,09,0A,0B,0C,0D,0E,0F,
10,11,12,13,14,15,16,19,1A,1B,1C,1D,1E,1F,
20,21,22,23,24,25,26,27,28,29, 2A,2B,2C,2D,2E,2F,
30,31,32,33,34,35,36,37,38,39,3A,3B,3C,3D,3E,
40,41,42,43,44,45,46,47,48,49,4B,4C,4D,4E,4F,
50,51,52,53,54,55,56,57,58,
ATI1 255
ATI2 Success
ATI3 SoftK56V B2.1 V7.12.09
ATI4 SoftV90 Voice Speakerphone Modem
ATI5 181
ATI6 SoftK56
CModem Version 12
Rksample Version 342
ATI7 255
tab=Driver
...Provider: Microsoft
...Date: 7/18/2003
...Version: 7.12.9.0
...Signer: Microsoft Windows Publisher
tab=Resources
I/O Range : ECF8 - ECFF
IRQ : 17
_ _ _ _ _
dialup networking
hello bene0404z,
puppy comes with support for several different types of winmodem, unfortunately not for conexant types though. But, if it is a conexant modem, then you still might be able to get it working. I'm entering this via a conexant pci winmodem.
If you run Menu->System->Pupscan, for your pci devices, puppy should at least detect the card & give the vendor & product ID's. From the win98 info you've provided I don't know whether it's a conexant HCF or HSF modem...maybe someone else might have a better idea?
But if you can find vendor 0x???? device 0x????, then it should be clearer.
puppy comes with support for several different types of winmodem, unfortunately not for conexant types though. But, if it is a conexant modem, then you still might be able to get it working. I'm entering this via a conexant pci winmodem.
If you run Menu->System->Pupscan, for your pci devices, puppy should at least detect the card & give the vendor & product ID's. From the win98 info you've provided I don't know whether it's a conexant HCF or HSF modem...maybe someone else might have a better idea?
But if you can find vendor 0x???? device 0x????, then it should be clearer.