VOIP
Ok...using the new 4.1rc and psip 0.12 August 8 2008 version with call quality set to 10 and max calls set to 4 works for me..hooray!! I don't see anyone online however but maybe none are online..dunno.
I called Grant and got him on his cell phone..ooops...I wondered why the rings sounded like the British double ring...lol
Overall my setup works well and vm messages are getting forwarded to email..hooray again.
I have posted a few vm messages to Lobster,Grant, Will and myself for testing so if you don't gt them let me know
Best,
Eric
I called Grant and got him on his cell phone..ooops...I wondered why the rings sounded like the British double ring...lol
Overall my setup works well and vm messages are getting forwarded to email..hooray again.
I have posted a few vm messages to Lobster,Grant, Will and myself for testing so if you don't gt them let me know
Best,
Eric
[color=darkred][i]Be not afraid to grow slowly, only be afraid of standing still.[/i]
Chinese Proverb[/color]
Chinese Proverb[/color]
eric,
I got two messages from you
the first was sent wiith 0.12 but had very poor audio quality
the second with 0.11 which sounded much better, OK
edit just received one today from 0.12, exellent call quality, cheers
I got two messages from you
the first was sent wiith 0.12 but had very poor audio quality
the second with 0.11 which sounded much better, OK
edit just received one today from 0.12, exellent call quality, cheers
Will
contribute: [url=http://www.puppylinux.org]community website[/url], [url=http://tinyurl.com/6c3nm6]screenshots[/url], [url=http://tinyurl.com/6j2gbz]puplets[/url], [url=http://tinyurl.com/57gykn]wiki[/url], [url=http://tinyurl.com/5dgr83]rss[/url]
contribute: [url=http://www.puppylinux.org]community website[/url], [url=http://tinyurl.com/6c3nm6]screenshots[/url], [url=http://tinyurl.com/6j2gbz]puplets[/url], [url=http://tinyurl.com/57gykn]wiki[/url], [url=http://tinyurl.com/5dgr83]rss[/url]
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
I have now a telephone facility via internet with my provider.
This is done through my rooter/adsl modem which has voip support.
Could I use that SIP domain and userid with this program?
This is done through my rooter/adsl modem which has voip support.
Could I use that SIP domain and userid with this program?
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
I am glad Eric has PSIP working
- it is not working for me
No doubt it is some setting
I have forgotten to set in the config file
I am having to go back to pjsua from command line . . .
- it is not working for me
No doubt it is some setting
I have forgotten to set in the config file
I am having to go back to pjsua from command line . . .
Code: Select all
# ./psip2
/usr/local/psip/func_startpjsua: line 43: 13482 Broken pipe tail -f $PJSIGNAL >$PJTMP/pjsua-input-pipe
/usr/local/psip/func_progressbar: line 3: 13957 Broken pipe cat "$PJTMP/status-message"
/usr/local/psip/func_progressbar: line 3: 13974 Broken pipe cat "$PJTMP/status-message"
/usr/local/psip/func_progressbar: line 3: 13988 Broken pipe cat "$PJTMP/status-message"
/usr/local/psip/func_progressbar: line 3: 14019 Broken pipe cat "$PJTMP/status-message"
/usr/local/psip/func_progressbar: line 3: 14033 Broken pipe cat "$PJTMP/status-message"
/usr/local/psip/func_progressbar: line 3: 14050 Broken pipe cat "$PJTMP/status-message"
/usr/local/psip/func_progressbar: line 3: 14064 Broken pipe cat "$PJTMP/status-message"
Hi Lobster,
This below is what I'm using along with speex...some people can't use speex so maybe look there. Also at one time I had to delete ALL psip files including the tmp/psip directory to start anew...this worked.
Also remember to leave one line empty at the bottom of the cfg file.
My partial settings are as follows
#
# Network settings:
#
--local-port 5060
#I think ice is important for maintaining routing information for those with dynamic internet ip addresses
#--use-ice
#I think this might only work if you have a gizmo account
#--stun-srv=stun01.sipphone.com
#
# Media settings:
#
# using default --clock-rate 12000
--quality 10
# using default --ec-tail 200
# using default --ilbc-mode 20
--rtp-port 4000
#
# User agent:
#
--max-calls 4
Best,
Eric
This below is what I'm using along with speex...some people can't use speex so maybe look there. Also at one time I had to delete ALL psip files including the tmp/psip directory to start anew...this worked.
Also remember to leave one line empty at the bottom of the cfg file.
My partial settings are as follows
#
# Network settings:
#
--local-port 5060
#I think ice is important for maintaining routing information for those with dynamic internet ip addresses
#--use-ice
#I think this might only work if you have a gizmo account
#--stun-srv=stun01.sipphone.com
#
# Media settings:
#
# using default --clock-rate 12000
--quality 10
# using default --ec-tail 200
# using default --ilbc-mode 20
--rtp-port 4000
#
# User agent:
#
--max-calls 4
Best,
Eric
[color=darkred][i]Be not afraid to grow slowly, only be afraid of standing still.[/i]
Chinese Proverb[/color]
Chinese Proverb[/color]
Beem, that would be a Yes.Béèm wrote:I have now a telephone facility via internet with my provider.
This is done through my rooter/adsl modem which has voip support.
Could I use that SIP domain and userid with this program?
gazb uses this type of setup all the time.
Gaz if you see this maybe you can explain your setup to beem.
Smokey
call out to pstn
There is some info hereBéèm wrote:I have now a telephone facility via internet with my provider.
This is done through my rooter/adsl modem which has voip support.
Could I use that SIP domain and userid with this program?
http://www.murga-linux.com/puppy/viewto ... &start=120
You have to add county codes etc..the help section at gizmo5 would help.
- Béèm
- Posts: 11763
- Joined: Wed 22 Nov 2006, 00:47
- Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win
Gazb
I am very new to this stuff.
I did come that far that the whitebook did found my provider *8260 voip.belgacom.be, but as there is a red sign with a little cross, I understand Belgacom is refusing incoming calls.
I don't know if it is the same for outgoing calls.
To have the gizmo help you talked about, do I have to install another program then psip?
I am very new to this stuff.
I did come that far that the whitebook did found my provider *8260 voip.belgacom.be, but as there is a red sign with a little cross, I understand Belgacom is refusing incoming calls.
I don't know if it is the same for outgoing calls.
To have the gizmo help you talked about, do I have to install another program then psip?
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]
Hi all you Voip/Psip users.
We (Prit and myself) are running a test of Gizmo from a web page.
Look here http://www.puppylinux.asia/
So far it does not work for me but maybe a few testers will help.
To all the psip/voip users..sorry I have been away. After Christmas I would like to get back into the voice contacts again....it was a great time to talk to all the people using Psip, Skype and Gizmo.
Merry Christmas and Happy New Year.
Eric
We (Prit and myself) are running a test of Gizmo from a web page.
Look here http://www.puppylinux.asia/
So far it does not work for me but maybe a few testers will help.
To all the psip/voip users..sorry I have been away. After Christmas I would like to get back into the voice contacts again....it was a great time to talk to all the people using Psip, Skype and Gizmo.
Merry Christmas and Happy New Year.
Eric
[color=darkred][i]Be not afraid to grow slowly, only be afraid of standing still.[/i]
Chinese Proverb[/color]
Chinese Proverb[/color]
Hiya Grant,
Long time no psee (psip see)
Well I'll let it go for a bit then put it in the biz bag (biz bag was a commercial on TV years back over here).
Thanks smokey....we'll chat soon.
Eric
Long time no psee (psip see)
Well I'll let it go for a bit then put it in the biz bag (biz bag was a commercial on TV years back over here).
Thanks smokey....we'll chat soon.
Eric
[color=darkred][i]Be not afraid to grow slowly, only be afraid of standing still.[/i]
Chinese Proverb[/color]
Chinese Proverb[/color]
And the same to youCaneri wrote:Hi all you Voip/Psip users.
We (Prit and myself) are running a test of Gizmo from a web page.
Look here http://www.puppylinux.asia/
So far it does not work for me but maybe a few testers will help.
To all the psip/voip users..sorry I have been away. After Christmas I would like to get back into the voice contacts again....it was a great time to talk to all the people using Psip, Skype and Gizmo.
Merry Christmas and Happy New Year.
Eric
I was able to get the echo test voice to play at half speed and the test came back but Very ch-o-py . Interesting project
Puppy Linux...
It just works!
It just works!
Hey Peppyy,
This gizmo thingy is still early beta so it may take awhile for it to come online fully.
I still can't login...it just sits there trying to connect...hmmm
Happy New Year..have a beer (replace with beverage of your choice here ) for me...
Eric
caneri@proxy01.sipphone.com
This gizmo thingy is still early beta so it may take awhile for it to come online fully.
I still can't login...it just sits there trying to connect...hmmm
Happy New Year..have a beer (replace with beverage of your choice here ) for me...
Eric
caneri@proxy01.sipphone.com
[color=darkred][i]Be not afraid to grow slowly, only be afraid of standing still.[/i]
Chinese Proverb[/color]
Chinese Proverb[/color]