915resolution patched

For drivers and kernel modules.
Message
Author
tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#31 Post by tempestuous »

OK, good to hear.

915resolution dotpet moved to 1st post in this thread.
Modified source code now attached to 5th post.

Just to be clear; the test machine in question is an ASUS Eee 1005PE ?

PaceNotes
Posts: 13
Joined: Mon 14 Jul 2008, 19:40

#32 Post by PaceNotes »

My machine is actually a 1005PEB. I did a quick search and somebody said the hardware is identical to the 1005PE and it only differs in appearance but I am not sure if that is entirely true.

uggla
Posts: 2
Joined: Fri 27 Aug 2010, 18:35

#33 Post by uggla »

Could someone please do a patch for GMA X3100, device ID 8086:2a02?

/Uggla

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#34 Post by tempestuous »

915resolution just updated in the first post to include support for GMA X3100, device ID's 8086:2a01 and 8086:2a02.

uggla
Posts: 2
Joined: Fri 27 Aug 2010, 18:35

#35 Post by uggla »

Great! Thanks!

/Uggla

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#36 Post by tempestuous »

915resolution just updated in the first post to support an additional GMA3150 chipset; device id 8086:a000,
as found on the Intel mini-ITX D510MO motherboard.

haohetao
Posts: 3
Joined: Fri 26 Nov 2010, 04:12

#37 Post by haohetao »

Can add Intel HD Graphics series graphics cards of Intel core i CPU integrated support?

zubr
Posts: 4
Joined: Wed 15 Jun 2011, 16:13

#38 Post by zubr »

It's would be nice if you will add support of:
Sandybridge Intel® HD Graphics 2000/3000 (used in 2nd Generation Intel® Core™ i7/i5/i3 processor family)
HD Intel® HD Graphics (used in Intel® 2010 Core™ i7/i5/i3 processor family)

to 915resolution.

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#39 Post by tempestuous »

I can only do so if you provide the relevant device ID(s).
You need to run this command -

Code: Select all

915resolution -l
and report. You should also tell me what computer is in question.

zubr
Posts: 4
Joined: Wed 15 Jun 2011, 16:13

#40 Post by zubr »

Computer:
Lenovo x220 Tablet
Intel i7-2620M 2.7Ghz (3.4Ghz Turbo), 1333MHz system bus, 4MB L2 cache
Intel HD Graphics 3000
az@az:/home/az# 915resolution -l
Intel 800/900 Series VBIOS Hack : version 0.5.3

Intel chipset detected. However, 915resolution was unable to determine the chipset type.
Chipset Id: 1048086
Please report this problem to stomljen@yahoo.com
Cut from pciconf -lbcv :
hostb0@pci0:0:0:0: class=0x060000 card=0x21db17aa chip=0x01048086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = bridge
subclass = HOST-PCI
cap 09[e0] = vendor (length 12) Intel cap 0 version 1
vgapci0@pci0:0:2:0: class=0x030000 card=0x21db17aa chip=0x01268086 rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
class = display
subclass = VGA
bar [10] = type Memory, range 64, base 0xf0000000, size 4194304, enabled
bar [18] = type Prefetchable Memory, range 64, base 0xe0000000, size 268435456, enabled
bar [20] = type I/O Port, range 32, base 0x5000, size 64, enabled
cap 05[90] = MSI supports 1 message
cap 01[d0] = powerspec 2 supports D0 D3 current D0
cap 13[a4] = PCI Advanced Features: FLR TP
P.S. Don't wonder about pciconf, I'm using FreeBSD.

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#41 Post by tempestuous »

915resolution just updated in the first post to support the HD Graphics 3000 device, device ID 0104:8086
as found in (some) Core i3/i5/i7 "Sandy Bridge" integrated processors.

zubr
Posts: 4
Joined: Wed 15 Jun 2011, 16:13

#42 Post by zubr »

az@az:~# 915resolution -l
Intel 800/900 Series VBIOS Hack : version 0.5.3

Unable to determine bios type.
Please run the program 'dump_bios' as root and
email the file 'vbios.dmp' to stomljen@yahoo.com.
Chipset: HD3000
Mode Table Offset: $C0000 + $142
Mode Table Entries: 39

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#43 Post by tempestuous »

zubr wrote:Please run the program 'dump_bios' as root and
email the file 'vbios.dmp' to stomljen@yahoo.com.
That's probably what you will have to do. My package includes the "dump_bios" utility.

... or maybe upgrade to the very latest Xorg with updated intel driver.

zubr
Posts: 4
Joined: Wed 15 Jun 2011, 16:13

#44 Post by zubr »

Bios attached.

I use latest Xorg, but I cannot use Intel driver because after 2.9 version it works only with KMS, but FreeBSD still has no KMS support. Drivers before 2.9 version don't have support for Sandy. :(

So I have resolution 1024x768 instead of 1366x768 with VESA.. :(
Attachments
vbios.dmp.bz2
HD3000 dump
(38.38 KiB) Downloaded 1241 times

haohetao
Posts: 3
Joined: Fri 26 Nov 2010, 04:12

#45 Post by haohetao »

My Computer
zotac H55ITX-A-E Wifi
intel core i3 530(2.66GHz)
HD Intel® HD Graphics (used in Intel® 2010 Core™ i7/i5/i3 processor family)

915resolution -l
Intel 800/900 Series VBIOS Hack : version 0.5.3

Intel chipset detected. However, 915resolution was unable to determine the chipset type.
Chipset Id: 408086
Please report this problem to stomljen@yahoo.com
lspci -mm -v -d 8086:0042
Slot: 00:02.0
Class: VGA compatible controller
Vendor: Intel Corporation
Device: Core Processor Integrated Graphics Controller
SVendor: Intel Corporation
SDevice: Core Processor Integrated Graphics Controller
Rev: 12
lspci -nn -vv -d 8086:0042
00:02.0 VGA compatible controller [0300]: Intel Corporation Core Processor Integrated Graphics Controller [8086:0042] (rev 12) (prog-if 00 [VGA controller])
Subsystem: Intel Corporation Core Processor Integrated Graphics Controller [8086:0042]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at fb800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at dc00
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0500c Data: 4189
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-
Kernel driver in use: i915
Kernel modules: i915

haohetao
Posts: 3
Joined: Fri 26 Nov 2010, 04:12

#46 Post by haohetao »

Hi,Why not have my graphics

tempestuous
Posts: 5464
Joined: Fri 10 Jun 2005, 05:12
Location: Australia

#47 Post by tempestuous »

haohetao, check your private messages!
7 days ago (July 20) I sent you an updated version of 915resolution to test.

Samuel_Vimes
Posts: 1
Joined: Thu 28 Jul 2011, 14:05

#48 Post by Samuel_Vimes »

I have the same problem with my dell inpiron N5110 =(

sudo ./915resolution -l
Intel 800/900 Series VBIOS Hack : version 0.5.3

Intel chipset detected. However, 915resolution was unable to determine the chipset type.
Chipset Id: 1048086
Please report this problem to stomljen@yahoo.com
lspci -mm -v -d 8086:0116
Slot: 00:02.0
Class: VGA compatible controller
Vendor: Intel Corporation
Device: Sandy Bridge Integrated Graphics Controller
SVendor: Dell
SDevice: Device 04ca
Rev: 09
lspci -nn -vv -d 8086:0116
00:02.0 VGA compatible controller [0300]: Intel Corporation Sandy Bridge Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:04ca]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000
Expansion ROM at <unassigned> [disabled]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCI Advanced Features
AFCap: TP+ FLR+
AFCtrl: FLR-
AFStatus: TP-

rbeef
Posts: 1
Joined: Wed 06 Jun 2012, 15:19

#49 Post by rbeef »

I have a new Acer 4752-6431. I'm getting the following:

slippy$ sudo ./915resolution -l
Password:
Intel 800/900 Series VBIOS Hack : version 0.5.3

Unable to determine bios type.
Please run the program 'dump_bios' as root and
email the file 'vbios.dmp' to stomljen@yahoo.com.
Chipset: HD3000
Mode Table Offset: $C0000 + $142
Mode Table Entries: 39
slippy$

It sees the chipset but not the VBIOS. Can you help? I've uploaded my vbios.dmp file.

User avatar
vtpup
Posts: 1420
Joined: Thu 16 Oct 2008, 01:42
Location: Republic of Vermont
Contact:

#50 Post by vtpup »

Same problem here. I ran the 915 resolution patch .pet but got same result.
Error message below appears every boot. Racy 5.3 on an Acer Aspire 5349-2635 laptop)

Code: Select all

# 915resolution -l
Intel 800/900 Series VBIOS Hack : version 0.5.3

Unable to determine bios type.
Please run the program 'dump_bios' as root and
email the file 'vbios.dmp' to stomljen@yahoo.com.
Chipset: HD3000
Mode Table Offset: $C0000 + $142
Mode Table Entries: 39

# lspci
00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
The display is working, I don't know if the above error message ("Unable to......39") is significant, but is always appears on startup.
[color=darkblue]Acer Aspire 5349-2635 laptop Tahrpup.[/color]
[color=blue]Acer R11 and C720 Chromebks Bionicpup64[/color]
[color=olive]Acer Iconia A1-830 tablet no pup[/color]
[color=orange]www.sredmond.com[/color]

Post Reply