Pburn wont burn
Posted: Tue 04 Nov 2008, 16:57
hi, this is my first ever post and first may i say thankyou for puting so much time and effort into such a great program!
for me the problem is that on a fresh install of puppy 4.1 with the macpup skin i have just tried to burn a data disk with Pburn and continuously received this error.. here is the log..
###################################################
COMMAND:
###################################################
genisoimage -iso-level 3 -D -R -J -joliet-long -V "pburn_project" -p root -publisher "Pburn" -o "/root/.pburn/Pburn.iso" -exclude-list /root/.pburn/tmp/pburn-exclude -graft-points 'P1020051.JPG'='/root/Pictures/berlin nye/P1020051.JPG' 'P1040102.JPG'='/root/Pictures/berlin nye/P1040102.JPG' 'P1040094.JPG'='/root/Pictures/berlin nye/P1040094.JPG' 'P1050131.JPG'='/root/Pictures/berlin nye/P1050131.JPG' 'P1000487.JPG'='/root/Pictures/hitching/100_PANA/P1000487.JPG' 'P1000494.JPG'='/root/Pictures/hitching/100_PANA/P1000494.JPG' 'P1000543.JPG'='/root/Pictures/hitching/100_PANA/P1000543.JPG' 'P1000544.JPG'='/root/Pictures/hitching/100_PANA/P1000544.JPG' 'P1000566.JPG'='/root/Pictures/hitching/100_PANA/P1000566.JPG' 'P1000571.JPG'='/root/Pictures/hitching/100_PANA/P1000571.JPG' 'P1000577.JPG'='/root/Pictures/hitching/100_PANA/P1000577.JPG' 'P1000606.JPG'='/root/Pictures/hitching/100_PANA/P1000606.JPG'
wodim -multi -tao -v dev=/dev/sr0 driveropts=burnfree "/root/.pburn/Pburn.iso"
###################################################
OUTPUT:
###################################################
I: -input-charset not specified, using iso-8859-1 (detected in locale settings)
28.11% done, estimate finish Tue Nov 4 16:34:33 2008
56.14% done, estimate finish Tue Nov 4 16:34:33 2008
84.20% done, estimate finish Tue Nov 4 16:34:33 2008
Total translation table size: 0
Total rockridge attributes bytes: 1177
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
17820 extents written (34 MB)
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... giving up.
wodim: Device or resource busy.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
TOC Type: 3 = CD-ROM XA mode 2
i am still well on the steep linux learning curve so im sure its an easy fix or silly mistake of mine but really ive tried all i can ..
if you can help i will be really happy!!
oh by the way im on an ibm t40.. the cdrw drive will play disks with gxine etc but will not write..
all the best.. even[/list]
for me the problem is that on a fresh install of puppy 4.1 with the macpup skin i have just tried to burn a data disk with Pburn and continuously received this error.. here is the log..
###################################################
COMMAND:
###################################################
genisoimage -iso-level 3 -D -R -J -joliet-long -V "pburn_project" -p root -publisher "Pburn" -o "/root/.pburn/Pburn.iso" -exclude-list /root/.pburn/tmp/pburn-exclude -graft-points 'P1020051.JPG'='/root/Pictures/berlin nye/P1020051.JPG' 'P1040102.JPG'='/root/Pictures/berlin nye/P1040102.JPG' 'P1040094.JPG'='/root/Pictures/berlin nye/P1040094.JPG' 'P1050131.JPG'='/root/Pictures/berlin nye/P1050131.JPG' 'P1000487.JPG'='/root/Pictures/hitching/100_PANA/P1000487.JPG' 'P1000494.JPG'='/root/Pictures/hitching/100_PANA/P1000494.JPG' 'P1000543.JPG'='/root/Pictures/hitching/100_PANA/P1000543.JPG' 'P1000544.JPG'='/root/Pictures/hitching/100_PANA/P1000544.JPG' 'P1000566.JPG'='/root/Pictures/hitching/100_PANA/P1000566.JPG' 'P1000571.JPG'='/root/Pictures/hitching/100_PANA/P1000571.JPG' 'P1000577.JPG'='/root/Pictures/hitching/100_PANA/P1000577.JPG' 'P1000606.JPG'='/root/Pictures/hitching/100_PANA/P1000606.JPG'
wodim -multi -tao -v dev=/dev/sr0 driveropts=burnfree "/root/.pburn/Pburn.iso"
###################################################
OUTPUT:
###################################################
I: -input-charset not specified, using iso-8859-1 (detected in locale settings)
28.11% done, estimate finish Tue Nov 4 16:34:33 2008
56.14% done, estimate finish Tue Nov 4 16:34:33 2008
84.20% done, estimate finish Tue Nov 4 16:34:33 2008
Total translation table size: 0
Total rockridge attributes bytes: 1177
Total directory bytes: 0
Path table size(bytes): 10
Max brk space used 0
17820 extents written (34 MB)
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... retrying in 1 second.
Error trying to open /dev/sr0 exclusively (Device or resource busy)... giving up.
wodim: Device or resource busy.
Cannot open SCSI driver!
For possible targets try 'wodim --devices' or 'wodim -scanbus'.
For possible transport specifiers try 'wodim dev=help'.
For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from
the wodim documentation.
TOC Type: 3 = CD-ROM XA mode 2
i am still well on the steep linux learning curve so im sure its an easy fix or silly mistake of mine but really ive tried all i can ..
if you can help i will be really happy!!
oh by the way im on an ibm t40.. the cdrw drive will play disks with gxine etc but will not write..
all the best.. even[/list]