pupeee 4.2

For talk and support relating specifically to Puppy derivatives
Post Reply
Message
Author
User avatar
ttuuxxx
Posts: 11171
Joined: Sat 05 May 2007, 10:00
Location: Ontario Canada,Sydney Australia
Contact:

Re: pupeee 4.2

#16 Post by ttuuxxx »

luther349 wrote:everything should work out of the box sound wifi and the hotkeys. i applyed all the patches found on hear and remastered the iso enjoy. tested on a eeepc 900a.

drivers included.
madwifi
intel-hda sound patch
hotkeys-patch
eeepc acpi

megaupload http://www.megaupload.com/?d=EWD68CNY
mediafire http://www.mediafire.com/?sharekey=7431 ... b9a8902bda
Have you added the bug fixes for 4.2 like the abiword/downgrade/upgrade,lol The xsane fix, the current one in puppy won't work unless you have gimp installed and tiif5,which is actually tiff4beta3. also the blinky fix, and remax fix and a couple of others?
ttuuxxx
http://audio.online-convert.com/ <-- excellent site
http://samples.mplayerhq.hu/A-codecs/ <-- Codec Test Files
http://html5games.com/ <-- excellent HTML5 games :)

luther349
Posts: 61
Joined: Wed 01 Apr 2009, 04:02

#17 Post by luther349 »

no its just a stock puppy iso with driver fixes. just like the original pupeee 3.01 someone else did. anything else you wanna put on it is up to you.

as for the eeepc buyer yea there great little computers. and with puppy linux or some other light distro even there slow ssd does not hurt its preference. they just fly with puppy linux.

being this release is unofficial being i did it myself i don't have access to the main mirrors to host it on. of course if someone does put it on there for me then woot lol.

Carlomag
Posts: 2
Joined: Sat 04 Apr 2009, 09:25

eeePc 1000he

#18 Post by Carlomag »

Hi.
This post just to let you know that pupeee 4.2 is well working on my old eeepc 701, but does'n catch the right wi-fi card on my new 1000he.

Bye

Carlomag

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#19 Post by Lobster »

Hey Carlomag that is good news - that is the model I have.
Previously used the excellent EeeTiger (with Compiz Fusion)
which supported the custom Intel Atheros wifi.
Good to hear this works.
I am stuck on an XP computer but it is getting too much and I may just have to Puppify it. When I get home will try this on my Eeepc

Thanks guys and hope you will provide a Pupee 5.xx for the Kennels
when required )
http://www.puppylinux.org/wiki/developm ... ppy-kennel
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

smoser
Posts: 1
Joined: Sun 05 Apr 2009, 11:27

VPN for pupeee?

#20 Post by smoser »

Hi there,
First, many thanks for 4.2 -- it looks and runs great.

I have a recurring problem that I don't know what to do about:

Has anyone gotten a VPN established in on a pupeee box? I have looked around the puppy forums, and it seems to be a non-trivial issue (with MPPE support, etc.), and given the extremely helpful and ingenuitive puppeee/ eee users, I thought I'd ask here.

Specifically, I can connect via wireless to problem, but when I use gpptp to establish a VPN, i get an 'exited with code 0.' Talking to our network guys, it seems I start to make a connection, and then am immediately dropped.

Any pointers would be greatly apprecaited. thanks.

luther349
Posts: 61
Joined: Wed 01 Apr 2009, 04:02

#21 Post by luther349 »

sounds like a issue with the server or ports then a driver issue.

User avatar
Volsung
Posts: 160
Joined: Fri 28 Sep 2007, 02:39
Location: A house with broken Windows

#22 Post by Volsung »

[img]http://img385.imageshack.us/img385/3843/magussigbc0.jpg[/img]

User avatar
puppyiso
Posts: 594
Joined: Tue 13 Jan 2009, 02:27

Big Thank you.

#23 Post by puppyiso »

Thank you, Volsung.

It is a problem for all of us when someone makes a new puppy but nowhere to upload and share.

We got to find a solution for this. Maybe Woof approach or Choice Pup approach should be considered. (No apps jusrt core or build system only.)
So the download bandwidth limit shouldn't be reached.

Today, I went to see and compare Acer one and EEEPC 1000H+

There is a price difference of 1000 yuan. (2800 for 9" Acer One 3800 for EEEPC1000+)

I could buy one of them in Korea for a lot less. It wasn't the price, the elegance was the issue. And then there was areal nice looking Korean netbook caught my eyes.(I couldn't take my eyes off). But the battery hour is too short for me. I looked around other netbooks all day but couldn't make a decision.

The Korean beauty has about 2hours and EEE PC 1000 has 6hours. Besides that, both have the exact spec.

Longer battery hour is absolute necessity. However, if I buy EEEPC, then I have to pay 400 more yuan because it comes with Windows.

I don't like to pay any money to the world's richest man. I don't need windows anyway. I got Puppy. I do not want to pay what I don't need.

Anyway, I will try Pupeee when I go there again.(USB+Unetbootin, Maybe)

Thanks again.

luther349
Posts: 61
Joined: Wed 01 Apr 2009, 04:02

#24 Post by luther349 »

ubooten works just fine.

as for your netbook choice its a big one being thers so many of them now. but they all pretty much specked the same. you should look at storage space and ram. i got my eee 900a from ebay for 160$. being i have a usb hd storage is not a issue.

Ripiajo
Posts: 1
Joined: Mon 06 Apr 2009, 22:02

Did not work for me

#25 Post by Ripiajo »

Thanks for these files.

I could not get them to work, I am sure it is my fault. I burnt the iso file you posted, used a desktop to install to usb key, and used the key on my eeepc 901, but I have not noticed any improvement over the normal Puppy 4.2 install. No sound, no monitor hot swapping, no suspend.

Thanks again.

luther349
Posts: 61
Joined: Wed 01 Apr 2009, 04:02

#26 Post by luther349 »

you still need to run the puppy sound config the drivers patched but not loaded by default. not all eeepc have hda cards. it will see your intel-hda and crash after playing the test file no problem once you reboot your sound will work. so your going to have to install it or save the session for sound fixes.

suspend and swapping where not tested or even tried on this version. why they are not listed as fixes. suspending on puppy would be buggy at best rember it loads into ram its self.

for the 1000he owner they use a newer wifi chipset. if you look in the forum link i have with the pets i used someone has posted a driver for that model eeepc. surprising madwifi didn't pick it up thow. must be really new.

User avatar
Volsung
Posts: 160
Joined: Fri 28 Sep 2007, 02:39
Location: A house with broken Windows

#27 Post by Volsung »

I have found that acpitool (for which there is a pet) works very well for suspend to RAM on my 701. I have not had any problems with it. Just sett up a shortcut to to make something like super+F1 runs acpitool -s and you have suspend. I suppose if you wanted to you could have that run on lid close too, but I prefer it not to do that.

http://www.murga-linux.com/puppy/viewtopic.php?t=31753
[img]http://img385.imageshack.us/img385/3843/magussigbc0.jpg[/img]

jakfish
Posts: 762
Joined: Fri 18 Jul 2008, 19:09

#28 Post by jakfish »

Amazing. The acpitool actually suspends my 900. I have it hooked up to Fn-F7 (since mute doesn't yet work), but would love to connect it to Fn-F1. Do you know the key code for the fn-f1 hotkey? For example, the key code for Fn-f2 is 0000001[01])

Thanks for this tip,
Jake

jakfish
Posts: 762
Joined: Fri 18 Jul 2008, 19:09

#29 Post by jakfish »

Uh, oh. While it always suspends, it does not always return intact. Programs fail to load, wifi sometimes fails to start again. I'll do more testing.

Jake

User avatar
Volsung
Posts: 160
Joined: Fri 28 Sep 2007, 02:39
Location: A house with broken Windows

#30 Post by Volsung »

I too have had problems with WiFi not resuming, but I find that to be a problem with suspend to RAM in general. I have had that with windows and linux on different hardware. I have never had any problems with programs though.

Let me know how the test turns out.

As to the hotkey, I used the WM to set those up. In JWM, IceWM, and Xfce you can set up hotkeys, but I do not think that you can use the Fn key. That is why I said super.
[img]http://img385.imageshack.us/img385/3843/magussigbc0.jpg[/img]

jakfish
Posts: 762
Joined: Fri 18 Jul 2008, 19:09

#31 Post by jakfish »

It keeps failing to return normally. Most times, something's missing: wifi, wine, no shutdown.

I remember now that Tempestuous had warned of this, precisely b/c suspending to RAM is pretty tricky.

On the other hand, the eee readout of acpitool is interesting and thorough, so I'll keep it installed.

Jake

User avatar
netjess
Posts: 29
Joined: Fri 17 Feb 2006, 14:24
Location: Oklahoma, USA
Contact:

wifi does not get IP

#32 Post by netjess »

I was sooo excited to see pupeee 4.2 but alas wifi seems to only partialy work. :(
I have a eeePC 900 that came with XP installed. It all works but snail pace slow.
Pupeee is so much faster and now it can see the network but it won't pull an IP. I have M$ machines and a MacBook that work on my wireless just fine. I use WPA - Personal (WPA2?).
I put in the key and it just doesn't get an IP. Also it doesn't see my network in the "Puppy Network Wizard" but it does in pwireless.
I think this may be key. Maybe PNW can't deal with the WPA?

luther349
Posts: 61
Joined: Wed 01 Apr 2009, 04:02

#33 Post by luther349 »

just use the puppy network manager if it doesn't see your network just try again. it will see it after a few tries. i tried other network manger in puppy and yes they don't get the ip.

User avatar
netjess
Posts: 29
Joined: Fri 17 Feb 2006, 14:24
Location: Oklahoma, USA
Contact:

wifi on Pupeee

#34 Post by netjess »

I tried it several times. Always the same result. It does not see my wireless network. It sees a couple of my neighbors networks though.
I have even tried moving to different rooms in the house. Same result.
Same machine running XP has no trouble connecting, just SLOW.

luther349
Posts: 61
Joined: Wed 01 Apr 2009, 04:02

#35 Post by luther349 »

my networks use wep and they work. however i have herd of issues with wpa and puppy. just switching your security to wep.

Post Reply