Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Tue 27 Sep 2016, 21:53
All times are UTC - 4
 Forum index » Advanced Topics » Hardware » Audio
No Sound hp mini 1000
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 1 [9 Posts]  
Author Message
mdbmike

Joined: 07 Apr 2009
Posts: 2

PostPosted: Sat 18 Apr 2009, 00:02    Post subject:  No Sound hp mini 1000
Subject description: MIxer Errors
 

I have been working with the Alsa sound Wizard and all good until it gets to the Mixer configuration. The wizard is so fast that it is hard to see in the Alsaconf box what errors is going on. My question is, there a way to either single step through the script or stop the config so that I can read the errors?
I have added options=snd-hda-intel model=Idt
options=snd-hda-intel enable_msi=1 in the modprobe.conf
I probably will not have sound until I take care of the errors.
Back to top
View user's profile Send private message 
inigomontoya

Joined: 30 Aug 2008
Posts: 2

PostPosted: Sat 02 May 2009, 10:53    Post subject:  

I too have a Mini 1000 with no sound. I'd be interested in any progress you make. Did you try model=ref?
Back to top
View user's profile Send private message 
mdbmike

Joined: 07 Apr 2009
Posts: 2

PostPosted: Mon 04 May 2009, 10:04    Post subject: No sound hp mini 1000  

I am trying to work between Ubuntu Hardy forums puppy forum to find out how ubuntu have the sound set up and working. Not sure what and where to look. If some one could give me a little hint of what files to look would be most helpful.
Back to top
View user's profile Send private message 
Oakems

Joined: 21 Mar 2009
Posts: 325

PostPosted: Fri 15 May 2009, 17:37    Post subject:  

Are you sure your using the right modules for your sound card? If so, for Puppy, you need to open /etc/modprobe.conf and delete the last bit that's added by Alsacorf, the bit that looks like this;
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.16 ---
alias snd-card-0 snd-sbawe
alias sound-slot-0 snd-sbawe
# --- END: Generated by ALSACONF, do not edit. ---
Then reboot. Once you've rebooted you shouldn't have any sound modules loaded, you can check with 'lsmod' from the command line.

Then you'll need to load the right modules from the command line. I'm not sure which one's your using, I'm guessing 'snd-intel8x0' but I'm not sure so I'll give you an example with mine.
Code:
modprobe snd
modprobe snd-sbawe

If something goes wrong you should get a message 'fatal error' of some sort. Not sure what to do if you do get these, but you can check 'lsmod' again to see if anything loaded, also 'dmesg' will show you if something was loaded successfully. You could check the module's dependencies by opening /lib/modules/2.6.25.16/modules.dep scroll down to your module and that whole line tells you what's needed. See if it matches the lsmod output.

Other than that I'm not much help, but if you do find other modules that are loaded as well as yours, they might be conflicting. you could blacklist them via Menu/Setup/PuppyControlPanel/BootConfig but only if they're not already loaded, so either delete the end bit of /etc/modprobe.conf again and reboot or edit /etc/rc.d/rc.local and put in the code to blacklist the module. Example; sbin/modprobe -r pcspkr which removes the pcspkr.
Back to top
View user's profile Send private message 
never_stop_learning


Joined: 07 Jul 2006
Posts: 65

PostPosted: Mon 17 Aug 2009, 13:46    Post subject:  

Thank you....I will try this and report back.....
Back to top
View user's profile Send private message 
never_stop_learning


Joined: 07 Jul 2006
Posts: 65

PostPosted: Fri 21 Aug 2009, 19:55    Post subject:  

Loaded the updated alsa .pet and I have sound.....!!!!!
Back to top
View user's profile Send private message 
sindi

Joined: 16 Aug 2009
Posts: 542

PostPosted: Sat 09 Jan 2016, 18:23    Post subject: No sound HP MIni 1000 Slacko 5.7 or Tahr 6.0.5  

Where do I find the alsa.pet which fixed this sound problem?
Sound works in XP not in Puppy Linux.

I am surprised that post-2009 puppies still have the same sound problem.[url][/url]
Back to top
View user's profile Send private message 
8Geee


Joined: 12 May 2008
Posts: 899
Location: N.E. USA

PostPosted: Sat 09 Jan 2016, 23:26    Post subject:  

Generally speaking in puppy...

MENU --> Setup --> ALSA Sound Wizard
On popup 'Adjust levels'

The routine is keyboard only using arrows and ESC key when done. One of the selections to the right is "Auto Mut". Press down-arrow to disable the mute.

For netbooks generally the nb-speakers are turned down in favor of headphones. So settings like 84/84/10/85/0/0/disabled work fine. Down in the tray the <))) icon can still adjust final volume.

_________________
Linux user #498913
Back to top
View user's profile Send private message 
rufwoof


Joined: 24 Feb 2014
Posts: 1612
Location: UK

PostPosted: Sun 10 Jan 2016, 10:15    Post subject:  

What does setvol terminal command control?

If I

setvol 0 30

it doesn't reduce the sound level to 30%
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 1 [9 Posts]  
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » Advanced Topics » Hardware » Audio
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.0426s ][ Queries: 11 (0.0068s) ][ GZIP on ]