Bug? maybe, but DEFINATELY A PROBLEM!

Please post any bugs you have found
Post Reply
Message
Author
User avatar
Johnny Reb
Posts: 132
Joined: Fri 05 Aug 2005, 08:02
Location: The Confederate States of America (occupied)
Contact:

Bug? maybe, but DEFINATELY A PROBLEM!

#1 Post by Johnny Reb »

I've run into a problem booting that I have no idea how to cure. I had been up for 27 days without rebooting, and was online when the modem quit responding. It's done that before, and usually disconnecting and reconnecting will cure the problem, but this time when I went to reconnect wvdial could not find the modem. Again, it's done that a couple of times in the past and a reboot has always cured it, so I started to reboot & puppy locked up after I clicked on reboot. Ok, no option but to power off and back on so I do that, and get the following results, which I have pared down to the few lines prior to where it stops loading:

initializing cryptographic API
Net4: Linux TCP/IP 1.0 for Net4.0
IP Protocols ICMP, UDP, TCP, IGMP
IP Routing Cache hash table of 8192 buckets 64kbytes
TCP Hash Tables configured (established 26144 bind 65536
Net4 Unix Domain Sockets 1.0(1? not sure about the 1 after the 0 can't read my own writing) - SMP for Linux Net4
UFS Mounted Root (Ext2 Filesystem) Read Only
Freeing kernel memory 132k-------------> and that's where it hangs every time i try to boot it.

Since I had not upgraded to 1.0.6 yet, I decided to go ahead and do the upgrade in the hope that it would cure whatever was causing the problem during the upgrade, but that didn't work. The upgrade went smoothly without any problems, but when I tried to reboot I got the same results as before. Oh, and before I forget, I did run fsck on the partition, and it found a few errors, and corrected them, but that did not cure the problem either. I did manage to get the only log that might contain any information that might shed some light on the problem, and saved the relevant portions to another computer, and here is the output from that log:

Dec 6 19:04:08 (none) daemon.notice pppd[5622]: pppd 2.4.1 started by root, uid 0
Dec 6 19:04:08 (none) daemon.debug pppd[5622]: using channel 120
Dec 6 19:04:08 (none) daemon.info pppd[5622]: Using interface ppp0
Dec 6 19:04:08 (none) daemon.info pppd[5622]: Connect: ppp0 -> /dev/ttySHCF0
Dec 6 19:04:08 (none) daemon.warn pppd[5622]: Warning - secret file /etc/ppp/pap-secrets has world and/or group access
Dec 6 19:04:08 (none) daemon.warn pppd[5622]: sent [LCP ConfReq id=0x1 syncmap 0x0> agic 0xeb6363d> comp> ccomp>]
Dec 6 19:04:08 (none) daemon.warn pppd[5622]: rcvd [LCP ConfNak id=0x1 syncmap 0xffffffff>]
Dec 6 19:04:08 (none) daemon.warn pppd[5622]: sent [LCP ConfReq id=0x2 agic 0xeb6363d> comp> ccomp>]
Dec 6 19:04:08 (none) daemon.warn pppd[5622]: rcvd [LCP ConfAck id=0x2 agic 0xeb6363d> comp> ccomp>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: rcvd [LCP ConfReq id=0x2 ru 1500> syncmap 0xffffffff> agic 0x6d1ad58a> comp> ccomp> rru 1500> ndpoint [null]>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: sent [LCP ConfRej id=0x2 rru 1500>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: rcvd [LCP ConfReq id=0x3 ru 1500> syncmap 0xffffffff> agic 0x6d1ad58a> comp> ccomp>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: sent [LCP ConfAck id=0x3 ru 1500> syncmap 0xffffffff> agic 0x6d1ad58a> comp> ccomp>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: sent [IPCP ConfReq id=0x1 ddr 0.0.0.0> ompress VJ 0f 01> s-dns1 0.0.0.0> s-dns3 0.0.0.0>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: sent [CCP ConfReq id=0x1 eflate 15> eflate(old#) 15>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: rcvd [IPCP ConfReq id=0x4 ompress VJ 0f 01> ddr 64.89.161.22>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: sent [IPCP ConfAck id=0x4 ompress VJ 0f 01> ddr 64.89.161.22>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: rcvd [IPCP ConfNak id=0x1 ddr 64.89.163.15> s-dns1 64.89.160.5> s-dns3 64.89.160.6>]
Dec 6 19:04:11 (none) daemon.warn pppd[5622]: sent [IPCP ConfReq id=0x2 ddr 64.89.163.15> ompress VJ 0f 01> s-dns1 64.89.160.5> s-dns3 64.89.160.6>]
Dec 6 19:04:11 (none) daemon.debug pppd[5622]: rcvd [LCP ProtRej id=0x5 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
Dec 6 19:04:11 (none) daemon.debug pppd[5622]: rcvd [IPCP ConfAck id=0x2 ddr 64.89.163.15> ompress VJ 0f 01> s-dns1 64.89.160.5> s-dns3 64.89.160.6>]
Dec 6 19:04:11 (none) daemon.notice pppd[5622]: local IP address 64.89.163.15
Dec 6 19:04:11 (none) daemon.notice pppd[5622]: remote IP address 64.89.161.22
Dec 6 19:04:11 (none) daemon.notice pppd[5622]: primary DNS address 64.89.160.5
Dec 6 19:04:11 (none) daemon.notice pppd[5622]: secondary DNS address 64.89.160.6
Dec 6 19:30:44 (none) syslog.warn klogd: via82cxxx: timeout while reading AC97 codec (0x9A0000)
Dec 6 19:35:46 (none) syslog.warn klogd: tcp connection: IN=ppp0 OUT= MAC= SRC=64.89.215.184 DST=64.89.163.15 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=34256 DF PROTO=TCP SPT=4509 DPT=80 WINDOW=64240 RES=0x00 SYN URGP=0
Dec 6 19:35:49 (none) syslog.warn klogd: tcp connection: IN=ppp0 OUT= MAC= SRC=64.89.215.184 DST=64.89.163.15 LEN=48 TOS=0x00 PREC=0x00 TTL=108 ID=34503 DF PROTO=TCP SPT=4509 DPT=80 WINDOW=64240 RES=0x00 SYN URGP=0
Dec 6 19:46:44 (none) syslog.warn klogd: udp connection: IN=ppp0 OUT= MAC= SRC=222.38.148.30 DST=64.89.163.15 LEN=379 TOS=0x00 PREC=0x00 TTL=45 ID=0 DF PROTO=UDP SPT=42626 DPT=2 LEN=359
Dec 6 20:23:05 (none) syslog.warn klogd: via82cxxx: timeout while reading AC97 codec (0x9A0000)
Dec 6 20:27:24 (none) daemon.info pppd[5622]: Terminating on signal 15.
Dec 6 20:27:24 (none) daemon.debug pppd[5622]: sent [LCP TermReq id=0x3 "User request"]
Dec 6 20:27:25 (none) daemon.info pppd[5622]: Terminating on signal 15.
Dec 6 20:28:45 (none) syslog.err klogd: OsFOpen("/etc/hcfpci/current.inf", "r"): error -2
Dec 6 20:28:45 (none) syslog.warn klogd: NVM_Write: ERROR - CAN'T OPEN FILE /etc/hcfpci/current.inf
Dec 6 20:28:45 (none) syslog.warn klogd: 0000759.668: HCF: Cannot write 324
Dec 6 20:28:45 (none) syslog.warn klogd: 0000759.718: HCF: +StatMgr_Close: Client e89e6380 left
Dec 6 20:28:45 (none) syslog.err klogd: OsFOpen("/etc/hcfpci/current.inf", "r"): error -2
Dec 6 20:28:45 (none) syslog.warn klogd: NVM_Write: ERROR - CAN'T OPEN FILE /etc/hcfpci/current.inf
Dec 6 20:28:45 (none) syslog.warn klogd: 0000759.730: HCF: Cannot write 358
Dec 6 20:28:45 (none) syslog.err klogd: OsFOpen("/etc/hcfpci/current.inf", "r"): error -2
Dec 6 20:28:45 (none) syslog.warn klogd: NVM_Write: ERROR - CAN'T OPEN FILE /etc/hcfpci/current.inf
Dec 6 20:28:45 (none) syslog.warn klogd: 0000759.731: HCF: Cannot write 360
Dec 6 20:28:45 (none) syslog.err klogd: OsFOpen("/etc/hcfpci/current.inf", "r"): error -2
Dec 6 20:28:45 (none) syslog.warn klogd: NVM_Write: ERROR - CAN'T OPEN FILE /etc/hcfpci/current.inf
Dec 6 20:28:45 (none) syslog.warn klogd: 0000759.732: HCF: Cannot write 324
Dec 6 20:28:46 (none) syslog.alert klogd: Unable to handle kernel paging request at virtual address e8a52048
Dec 6 20:28:46 (none) syslog.warn klogd: printing eip:
Dec 6 20:28:46 (none) syslog.warn klogd: e893c59d
Dec 6 20:28:46 (none) syslog.alert klogd: *pde = 27fdb067
Dec 6 20:28:46 (none) syslog.alert klogd: *pte = 00000000
Dec 6 20:28:46 (none) syslog.warn klogd: Oops: 0000
Dec 6 20:28:46 (none) syslog.warn klogd: CPU: 0
Dec 6 20:28:46 (none) syslog.warn klogd: EIP: 0010:[893c59d>] Tainted: P
Dec 6 20:28:46 (none) syslog.warn klogd: EFLAGS: 00010286
Dec 6 20:28:46 (none) syslog.warn klogd: eax: e8a52048 ebx: e89e6c6c ecx: 00000000 edx: 00000012
Dec 6 20:28:46 (none) syslog.warn klogd: esi: 000b99a9 edi: 000001f4 ebp: 00000000 esp: e4ae9c78
Dec 6 20:28:46 (none) syslog.warn klogd: ds: 0018 es: 0018 ss: 0018
Dec 6 20:28:46 (none) syslog.warn klogd: Process cnxthcf_mdmthrd (pid: 1015, stackpage=e4ae9000)
Dec 6 20:28:46 (none) syslog.warn klogd: Stack: e893caa0 e89e6c6c 00ff0012 e89e6c6c e893ca90 439583fe 0005c149 00000000
Dec 6 20:28:46 (none) syslog.warn klogd: e89e6c6c e89e6c6c e89e6990 e89e6c6c e894c4e6 e89e6c6c 0001001f 00000000
Dec 6 20:28:46 (none) syslog.warn klogd: 000001f4 00000000 0005c14a 000b976e e8936001 e89e6c6c e89e6c6c e89e6990
Dec 6 20:28:46 (none) syslog.warn klogd: Call Trace: [893caa0>] [893ca90>] [894c4e6>] [8936001>] [894bb03>]
Dec 6 20:28:46 (none) syslog.warn klogd: [894b99e>] [89e00c8>] [8928024>] [89282a4>] [8927e69>] [892742b>]
Dec 6 20:28:46 (none) syslog.warn klogd: [895d9af>] [895bf52>] [89744a0>] [8904458>] [8960b7e>] [8960514>]
Dec 6 20:28:46 (none) syslog.warn klogd: [8960cca>] [8960514>] [8960647>] [8960514>] [8909a9d>] [8908e5c>]
Dec 6 20:28:46 (none) syslog.warn klogd: [8962eaa>] [89632f1>] [8964261>] [896401b>] [88ffb6a>] [011d858>]
Dec 6 20:28:46 (none) syslog.warn klogd: [88ffd42>] [8901cd8>] [88ffd33>] [01072a3>] [8901cf4>] [88ffc50>]
Dec 6 20:28:46 (none) syslog.warn klogd:
Dec 6 20:28:46 (none) syslog.warn klogd: Code: 8b 00 0f b6 c0 c3 90 8b 4c 24 04 0f b6 44 24 08 8b 54 81 04
Dec 6 20:30:10 (none) syslog.info klogd: device eth0 left promiscuous mode
Dec 6 20:30:10 (none) syslog.info klogd: eth0: Promiscuous mode enabled.
Dec 6 20:30:11 (none) syslog.info klogd: device eth0 entered promiscuous mode
Dec 6 20:30:36 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 297) exited. Scheduling it for restart.
Dec 6 20:30:36 (none) user.info init: Starting pid 13926, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:37 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13926) exited. Scheduling it for restart.
Dec 6 20:30:37 (none) user.info init: Starting pid 13927, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:38 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13927) exited. Scheduling it for restart.
Dec 6 20:30:38 (none) user.info init: Starting pid 13928, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:39 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13928) exited. Scheduling it for restart.
Dec 6 20:30:39 (none) user.info init: Starting pid 13929, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:40 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13929) exited. Scheduling it for restart.
Dec 6 20:30:40 (none) user.info init: Starting pid 13930, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:41 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13930) exited. Scheduling it for restart.
Dec 6 20:30:41 (none) user.info init: Starting pid 13931, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:42 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13931) exited. Scheduling it for restart.
Dec 6 20:30:42 (none) user.info init: Starting pid 13932, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:43 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13932) exited. Scheduling it for restart.
Dec 6 20:30:43 (none) user.info init: Starting pid 13933, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:44 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13933) exited. Scheduling it for restart.
Dec 6 20:30:44 (none) user.info init: Starting pid 13934, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:45 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13934) exited. Scheduling it for restart.
Dec 6 20:30:45 (none) user.info init: Starting pid 13935, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:46 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13935) exited. Scheduling it for restart.
Dec 6 20:30:46 (none) user.info init: Starting pid 13936, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:47 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13936) exited. Scheduling it for restart.
Dec 6 20:30:47 (none) user.info init: Starting pid 13937, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:48 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13937) exited. Scheduling it for restart.
Dec 6 20:30:48 (none) user.info init: Starting pid 13938, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:49 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13938) exited. Scheduling it for restart.
Dec 6 20:30:49 (none) user.info init: Starting pid 13939, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:50 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13939) exited. Scheduling it for restart.
Dec 6 20:30:50 (none) user.info init: Starting pid 13940, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:51 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13940) exited. Scheduling it for restart.
Dec 6 20:30:51 (none) user.info init: Starting pid 13941, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:52 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13941) exited. Scheduling it for restart.
Dec 6 20:30:52 (none) user.info init: Starting pid 13942, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:53 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13942) exited. Scheduling it for restart.
Dec 6 20:30:53 (none) user.info init: Starting pid 13943, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:54 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13943) exited. Scheduling it for restart.
Dec 6 20:30:54 (none) user.info init: Starting pid 13944, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:55 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13944) exited. Scheduling it for restart.
Dec 6 20:30:55 (none) user.info init: Starting pid 13945, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:56 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13945) exited. Scheduling it for restart.
Dec 6 20:30:56 (none) user.info init: Starting pid 13946, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:57 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13946) exited. Scheduling it for restart.
Dec 6 20:30:57 (none) user.info init: Starting pid 13947, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:58 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13947) exited. Scheduling it for restart.
Dec 6 20:30:58 (none) user.info init: Starting pid 13948, console /dev/tty1: '/sbin/getty'
Dec 6 20:30:59 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13948) exited. Scheduling it for restart.
Dec 6 20:30:59 (none) user.info init: Starting pid 13949, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:00 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13949) exited. Scheduling it for restart.
Dec 6 20:31:00 (none) user.info init: Starting pid 13950, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:01 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13950) exited. Scheduling it for restart.
Dec 6 20:31:01 (none) user.info init: Starting pid 13951, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:02 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13951) exited. Scheduling it for restart.
Dec 6 20:31:02 (none) user.info init: Starting pid 13952, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:03 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13952) exited. Scheduling it for restart.
Dec 6 20:31:03 (none) user.info init: Starting pid 13953, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:04 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13953) exited. Scheduling it for restart.
Dec 6 20:31:04 (none) user.info init: Starting pid 13954, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:05 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13954) exited. Scheduling it for restart.
Dec 6 20:31:05 (none) user.info init: Starting pid 13955, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:06 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13955) exited. Scheduling it for restart.
Dec 6 20:31:06 (none) user.info init: Starting pid 13956, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:07 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13956) exited. Scheduling it for restart.
Dec 6 20:31:07 (none) user.info init: Starting pid 13957, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:08 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13957) exited. Scheduling it for restart.
Dec 6 20:31:08 (none) user.info init: Starting pid 13958, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:09 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13958) exited. Scheduling it for restart.
Dec 6 20:31:09 (none) user.info init: Starting pid 13959, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:10 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13959) exited. Scheduling it for restart.
Dec 6 20:31:10 (none) user.info init: Starting pid 13960, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:11 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13960) exited. Scheduling it for restart.
Dec 6 20:31:11 (none) user.info init: Starting pid 13961, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:12 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13961) exited. Scheduling it for restart.
Dec 6 20:31:12 (none) user.info init: Starting pid 13962, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:13 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13962) exited. Scheduling it for restart.
Dec 6 20:31:13 (none) user.info init: Starting pid 13963, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:14 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13963) exited. Scheduling it for restart.
Dec 6 20:31:14 (none) user.info init: Starting pid 13964, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:15 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13964) exited. Scheduling it for restart.
Dec 6 20:31:15 (none) user.info init: Starting pid 13965, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:16 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13965) exited. Scheduling it for restart.
Dec 6 20:31:16 (none) user.info init: Starting pid 13966, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:17 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13966) exited. Scheduling it for restart.
Dec 6 20:31:17 (none) user.info init: Starting pid 13967, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:18 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13967) exited. Scheduling it for restart.
Dec 6 20:31:18 (none) user.info init: Starting pid 13968, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:19 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13968) exited. Scheduling it for restart.
Dec 6 20:31:19 (none) user.info init: Starting pid 13969, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:20 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13969) exited. Scheduling it for restart.
Dec 6 20:31:20 (none) user.info init: Starting pid 13970, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:21 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13970) exited. Scheduling it for restart.
Dec 6 20:31:21 (none) user.info init: Starting pid 13971, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:22 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13971) exited. Scheduling it for restart.
Dec 6 20:31:22 (none) user.info init: Starting pid 13972, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:23 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13972) exited. Scheduling it for restart.
Dec 6 20:31:23 (none) user.info init: Starting pid 13973, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:24 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13973) exited. Scheduling it for restart.
Dec 6 20:31:24 (none) user.info init: Starting pid 13974, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:25 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13974) exited. Scheduling it for restart.
Dec 6 20:31:25 (none) user.info init: Starting pid 13975, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:26 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13975) exited. Scheduling it for restart.
Dec 6 20:31:26 (none) user.info init: Starting pid 13976, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:28 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13976) exited. Scheduling it for restart.
Dec 6 20:31:28 (none) user.info init: Starting pid 13977, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:29 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13977) exited. Scheduling it for restart.
Dec 6 20:31:29 (none) user.info init: Starting pid 13978, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:30 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13978) exited. Scheduling it for restart.
Dec 6 20:31:30 (none) user.info init: Starting pid 13979, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:31 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13979) exited. Scheduling it for restart.
Dec 6 20:31:31 (none) user.info init: Starting pid 13980, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:32 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13980) exited. Scheduling it for restart.
Dec 6 20:31:32 (none) user.info init: Starting pid 13981, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:33 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13981) exited. Scheduling it for restart.
Dec 6 20:31:33 (none) user.info init: Starting pid 13982, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:34 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13982) exited. Scheduling it for restart.
Dec 6 20:31:34 (none) user.info init: Starting pid 13983, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:35 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13983) exited. Scheduling it for restart.
Dec 6 20:31:35 (none) user.info init: Starting pid 13984, console /dev/tty1: '/sbin/getty'
Dec 6 20:31:36 (none) user.info init: Process '/sbin/getty -n -l /bin/autologinroot 38400 tty1' (pid 13984) exited. Scheduling it for restart.
Dec 6 20:31:36 (none) user.info init: Starting pid 13985, console /dev/tty1: '/sbin/getty'


If anyone has any idea about how to fix this I sure would appriciate any input you can give me.




Of all tyrannies, a tyranny exercised for the good of its victims may be the most oppressive. It may be better to live under robber barons than under omnipotent moral busybodies. The robber baron's cruelty may sometimes sleep, his cupidity may at some point be satiated; but those who torment us for our own good will torment us without end, for they do so with the approval of their own conscience. ~ C.S.Lewis
He who dares not offend cannot be honest.
~ Thomas Paine

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#2 Post by BarryK »

can you run other os's or linuxes?
it could be a ram fault.

User avatar
Johnny Reb
Posts: 132
Joined: Fri 05 Aug 2005, 08:02
Location: The Confederate States of America (occupied)
Contact:

#3 Post by Johnny Reb »

BarryK wrote:can you run other os's or linuxes?
it could be a ram fault.
Barry, thanks for the quick reply! It's not a ram problem. I've got that puppy installed on /dev/hda10, and the puppy I'm online with now is on /dev/hda6 so it'll boot other OS's & puppies . The one on /dev/hda10 though is the primary one I use because it's got the most free disk space. The puppy I'm booted into now only has about 200Mb of free space so I'm kind of limited as to what I can do with this one. It's great for surfing, but for trying to compile programs it's pretty crowded.

I've seen that exact same error in booting in another Linux distro, but it occured during the install process and prevented installation. It was peanut Linux 9.6. I downloaded it and was going to set it, or another OS up on another computer networked to this one to use as a caching dns server since my ISP's dns is not the most reliable. However when I ran into that bug I couldn't install it. It's kind of strange because it was reporting the exact same amount of kernel memory that puppy was, and the other computer only has 384Mb of ram as opposed to the 640Mb I've got installed on this one.



``To compel a man to furnish funds for the propagation of ideas he
disbelieves and abhors is sinful and tyrannical.'' ~ Thomas Jefferson
He who dares not offend cannot be honest.
~ Thomas Paine

Post Reply