Pwireless2 (Version 1.0)
- technowomble
- Posts: 74
- Joined: Thu 11 Oct 2007, 17:04
- Location: West Gloucestershire, UK
It's 11.30 pm local time and I'm probably not thinking too well, but I was getting a situation where Pwireless2 was showing several networks, including mine, and my profile was loaded, but although the banner came up to announce that an ip address had been obtained I couldn't connect to the web. I uninstalled Pwireless - also removed the original using Petbegone - and things are back to normal i.e. connection up and running through Network manager. I'll try some more tomorrow, when i can get a few more grey cells firing!
- technowomble
- Posts: 74
- Joined: Thu 11 Oct 2007, 17:04
- Location: West Gloucestershire, UK
This is interesting, though I don't fully understand what it means. In /etc/resolv.conf nameserver is shown as 10.0.0.2, whereas the IP obtained when connecting is regularly 10.0.0.4. I'm running at the moment without Pwireless, Network wizard settings saved, and my wireless came up at boot. With Pwireless there was some activity during boot, but it ceased before x-window started, which suggests that a hand-over isn't going properly? When I've got an hour or so today I'll check the other areas you mentioned and see if I can spot anything.
Hi jemimah
This is my first test of this and my wireless interface is wlan0.
Nothing shows in the guis.[ ]
Using dpup beta 4 with rt87usb module (TP link B/G usb adapter.. cheapo) which normally works ok in all puppies any kernel. If you need more info I'll be happy to oblige.
Cheers
(below may be a clue )
This is my first test of this and my wireless interface is wlan0.
Nothing shows in the guis.[ ]
Using dpup beta 4 with rt87usb module (TP link B/G usb adapter.. cheapo) which normally works ok in all puppies any kernel. If you need more info I'll be happy to oblige.
Cheers
(below may be a clue )
- Attachments
-
- dpuptest-pwi2.jpg
- (18.07 KiB) Downloaded 3140 times
Last edited by 01micko on Mon 16 Nov 2009, 06:26, edited 1 time in total.
Puppy Linux Blog - contact me for access
Nothing in any of the notebook tabs.. BTW, edited post with screeny while you were posting
- Attachments
-
- stat.jpg
- (10.12 KiB) Downloaded 3024 times
-
- net.jpg
- (16.77 KiB) Downloaded 2953 times
-
- profiles.jpg
- (19.39 KiB) Downloaded 2788 times
Last edited by 01micko on Mon 16 Nov 2009, 06:34, edited 1 time in total.
Puppy Linux Blog - contact me for access
H there
Interestingly the yafs show up now that i had to reconnect through the network wizard..
Here's the out put..
Hope this helps
Interestingly the yafs show up now that i had to reconnect through the network wizard..
Here's the out put..
Code: Select all
# ./networking
dhcpcd: version 5.1.3 starting
# killall: yaf-splash: no process killed
Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
ioctl[SIOCSIWENCODEEXT]: No such file or directory
killall: yaf-splash: no process killed
dhcpcd: eth0: broadcasting for a lease
dhcpcd: wlan0: waiting for carrier
dhcpcd: timed out
dhcpcd: allowing 8 seconds for IPv4LL timeout
dhcpcd: eth0: probing for an IPv4LL address
dhcpcd: eth0: checking for 169.254.19.42
dhcpcd: eth0: using IPv4LL address 169.254.19.42
killall: yaf-splash: no process killed
dhcpcd: forking to background
Puppy Linux Blog - contact me for access
1.. nojemimah wrote:Does the file /var/run/wpa_supplicant exist? It seems wpa_supplicant started, but some file is missing.
EDIT: I guess /var/run/wpa_supplicant should be a directory. Maybe I need to add that to the pet.
EDIT:hmm it doesn't exist by default in standard Puppy either, so that's probably not it.
2 I don't know
3 don't know either.
But I did have to stuff around to get back online..
Please, do NOT be discouraged. I'll help when I can. I know what these problems are like!
Cheers
Puppy Linux Blog - contact me for access
Would you be so kind as to create the /var/run/wpa_supplicant directory, and then restart?
If that doesn't work, can you try the attached updated version of wpa_cli?
If that doesn't work, can you try the attached updated version of wpa_cli?
- Attachments
-
- wpa_cli.gz
- (30.83 KiB) Downloaded 1262 times
Forget all that BS I posted earlier! While I disabled the network wizard i did not delete the profile (fine print... do please make it larger for idiots... er .. like.. no..)
It is working now.. Sorry to cause you grief.
I owe you one
It is working now.. Sorry to cause you grief.
I owe you one
Puppy Linux Blog - contact me for access
Well see that's the problem and where I need the most help. It would be nice to figure out how to integrate it, or at least make it play nice with network wizard. But figuring out other people's gtkdialog code is headache-inducing to say the least! (and I thought Perl was the only write-only language)
You'll get there. There's a couple of Bash/gtkdialog gurus around here... just shoot them a PM if you get stuck, I've only been coding in bash for less than 12 months and that's what I do.
Testers are the hard ones to snag!
Cheers and thanks.
Testers are the hard ones to snag!
Cheers and thanks.
Puppy Linux Blog - contact me for access
I've tried it on 3 Puppies. Using full installs.
4.1.1 and 4.1.2 with the 2.6.25.16 kernel and 4.3.1 with 2.6.30.5
kernel.
Tried with both Atheros cards in my signature and a Belkin
f5d7050 with zd1211rw module.
The Atheros cards use ath5k in the latest kernel and have a
difficult time with wpa in the network wizard, but connect
easily with Pwireless2. Belkin works fine also.
It worked with 4.1.2 and 4.3.1 but not with 4.1.1.
When I deleted it from 4.1.1 it seems to have taken some
necessary wpa files from the standard wizard along with it.
I restored the files with a live 4.1.1 cd and the wizard works
again.
I could only get the gtray icon to show up on 4.3.1.
Pwireless2 can make connection much easier for new
Puppy users. I like it a lot.
4.1.1 and 4.1.2 with the 2.6.25.16 kernel and 4.3.1 with 2.6.30.5
kernel.
Tried with both Atheros cards in my signature and a Belkin
f5d7050 with zd1211rw module.
The Atheros cards use ath5k in the latest kernel and have a
difficult time with wpa in the network wizard, but connect
easily with Pwireless2. Belkin works fine also.
It worked with 4.1.2 and 4.3.1 but not with 4.1.1.
When I deleted it from 4.1.1 it seems to have taken some
necessary wpa files from the standard wizard along with it.
I restored the files with a live 4.1.1 cd and the wizard works
again.
I could only get the gtray icon to show up on 4.3.1.
Pwireless2 can make connection much easier for new
Puppy users. I like it a lot.
Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs