Wine

Virtual machines, emulation, etc.
Post Reply
Message
Author
User avatar
vovchik
Posts: 1507
Joined: Tue 24 Oct 2006, 00:02
Location: Ukraine

#91 Post by vovchik »

Dear AliG,

I have installed all green_dome's versions and they all work. Form your screenshot I smell a corrupt download, since the message was that certain files are either not found (essential ones) or they are too short. Please download and try again. The pet is OK.

With kind regards,
vovchik

User avatar
aliG
Posts: 76
Joined: Sun 15 Jul 2007, 09:52
Location: Glasgow, Scotland

#92 Post by aliG »

Vovchik,

OK download the .PET again - check the MD5 sum I get "8de9f588dfb1641f2c0ea05bd4b60605" this is not the same as the one on the Wuala web page... Tried a couple more times with different MD5 each time!

Tried the SFS file - MD5 sum matches the one on the web - added to boot manager, and I'm up and running.

No idea what the problem with the PET is vs the SFS (perhaps only tempoary) - but thanks for the suggestion. Now I'm off to install my data logger software and learn about serial ports under WINE..

Спа

green_dome
Posts: 203
Joined: Tue 06 Jan 2009, 02:49
Contact:

Wine 1.3.2

#93 Post by green_dome »

my attempt at compiling wine 1.3.2

wine-1.3.2-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.2-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.2-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.2-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.2-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

User avatar
vovchik
Posts: 1507
Joined: Tue 24 Oct 2006, 00:02
Location: Ukraine

#94 Post by vovchik »

Dear green_dome,

Works nicely, as usual. Also, thanks for listing your compilation setup, your ./configure line and platform.

With kind regards,
vovchik

lezzloco
Posts: 44
Joined: Sun 02 Mar 2008, 23:33

#95 Post by lezzloco »

Also thanks again green_dome, if you ever wondered what people use wine for, this is what I use it for, I run openBVE (a trainsim and the best), it now out performs windoz :D which is Kool

youtube of your wine in action

http://www.youtube.com/watch?v=ObBtzaOCQqA

picture quality is a lot better when not recording at same time, I run at 1280x1024 normally but have to turn the wick down to do the capture.

thanks again LEZZ

User avatar
vovchik
Posts: 1507
Joined: Tue 24 Oct 2006, 00:02
Location: Ukraine

wine 1.3.3 release

#96 Post by vovchik »

Dear green_dome,

It looks like we have a new one:
Wine 1.3.3 Released

September 18, 2010

The Wine development release 1.3.3 is now available.

What's new in this release:

* Improved support for right-to-left text.
* Support for CMYK JPEG images.
* Beginnings of a Game Explorer implementation.
* Improved 64-bit support in MSI.
* Stub inetcpl control panel applet.
* A number of fixes to crypto support.
* Translation updates.
* Various bug fixes.
With thanks in advance,
vovchik

User avatar
axiz
Posts: 8
Joined: Tue 14 Sep 2010, 02:55
Location: San Carlos de Bariloche (ARGENTINA)

#97 Post by axiz »

Hi green_dome!. Im trying to compile Wine 1.3.3 with the dib engine for test, when i try it end in kernel 32 dll, the file process.c "fork_and_exec", with error 1, O_CLOEXEC its not defined.
Can you helpme with it?.
PD: Sorry for my english...
AxiZ

green_dome
Posts: 203
Joined: Tue 06 Jan 2009, 02:49
Contact:

#98 Post by green_dome »

axiz:
I would like to help, but I am not familiar with the dib engine. Sorry.

green_dome
Posts: 203
Joined: Tue 06 Jan 2009, 02:49
Contact:

Wine 1.3.3

#99 Post by green_dome »

my attempt at compiling wine 1.3.3

wine-1.3.3-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.3-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.3-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.3-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.3-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

User avatar
vovchik
Posts: 1507
Joined: Tue 24 Oct 2006, 00:02
Location: Ukraine

nice job

#100 Post by vovchik »

Dear green_dome,

My usual comments - works nicely on 3.01, 4.10 and Jemimah's Fluppy v. 5. Thanks.

With kind regards,
vovchik

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#101 Post by bigpup »

Dear green_dome,

Please do not think no one is using this. You are the Wine expert for Puppy Linux. Thank you, thank you for keeping it updated!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
In your case, very little comments is good. It just works. I wish others would follow your example and latch onto one of the major programs and keep them updated like you have done with Wine.

green_dome
Posts: 203
Joined: Tue 06 Jan 2009, 02:49
Contact:

Wine 1.3.4

#102 Post by green_dome »

my attempt at compiling wine 1.3.4

wine-1.3.4-i486.pet (release 1)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DEV-1.3.4-i486.pet (release 1) (development package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine_DOC-1.3.4-i486.pet (release 1) (documentation package)
http://www.wuala.com/version2013/Public ... -i486.pet/

wine-1.3.4-i486-sfs3.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs3.sfs/

wine-1.3.4-i486-sfs4.sfs (release 1)
http://www.wuala.com/version2013/Public ... -sfs4.sfs/

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at http://puppylinux.asia/ require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

esound_DEV-0.2.41-i486.pet
http://puppylinux.asia/members/T/486_pe ... 1-i486.pet

fontconfig-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

fontconfig_DEV-2.7.1-i486-pup4.pet
http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet

gnutls+deps-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

gnutls+deps_DEV-2.6.6-i486.pet
http://puppylinux.asia/members/T/444/gn ... 6-i486.pet

jack-audio-connection-kit-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

jack-audio-connection-kit_DEV-0.116.1-i486.pet
http://puppylinux.asia/members/T/444/ja ... 1-i486.pet

libgphoto2-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

libgphoto2_DEV-2.4.6-pup4.pet
http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet

openldap-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

openldap_DEV-2.4.13-i486.pet
http://puppylinux.asia/members/T/444/op ... 3-i486.pet

xorg_xorg_full_dri-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet

xorg_xorg_full_dri_DEV-7.3.pet
http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko, look here

I use the console to install packages from winetricks. For help with this I use

Code: Select all

winetricks -h
[source]

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

User avatar
vovchik
Posts: 1507
Joined: Tue 24 Oct 2006, 00:02
Location: Ukraine

works fine

#103 Post by vovchik »

Dear green_dome,

The new version is fine, so many thanks, as usual.

With kind regards,
vovchik

Jim1911
Posts: 2460
Joined: Mon 19 May 2008, 20:39
Location: Texas, USA

#104 Post by Jim1911 »

Hi green_dome,

Kudos for your fine wine pets and sfs, I've been using them for quite a while and really appreciate your hard work in keeping them up to date.

Thanks again,
Jim

looseSCREWorTWO
Posts: 812
Joined: Thu 04 Feb 2010, 13:16
Location: Australia, 1999 Toshiba laptop, 512mb RAM, no HDD, 431 Retro & 421 Retro

#105 Post by looseSCREWorTWO »

G'day green_dome,
Thankyou for the Wine pets. Being able to run IrfanView from Puppy is brilliant. Wine is SO well-named - it just gets better and better with age.
Steve

User avatar
vovchik
Posts: 1507
Joined: Tue 24 Oct 2006, 00:02
Location: Ukraine

Wine 1.3.5 released

#106 Post by vovchik »

Dear green_dome,

May we again call on your services? A new version (1.3.5) is out and it includes a slew of improvements (
http://www.winehq.org/announce/1.3.5). Many thanks in advance.

With kind regards,
vovchik

User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#107 Post by Béèm »

green_dome. I have been using your work also but never expressed some appreciation.
So thank you.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]

green_dome
Posts: 203
Joined: Tue 06 Jan 2009, 02:49
Contact:

Wine 1.2.1

#108 Post by green_dome »

my attempt at compiling wine 1.2.1 (stable release)

wine-1.2.1-i486.pet (release 1)
<http://www.wuala.com/version2013/Public ... -i486.pet/>

wine_DEV-1.2.1-i486.pet (release 1) (development package)
<http://www.wuala.com/version2013/Public ... -i486.pet/>

wine_DOC-1.2.1-i486.pet (release 1) (documentation package)
<http://www.wuala.com/version2013/Public ... -i486.pet/>

wine-1.2.1-i486-sfs3.sfs (release 1)
<http://www.wuala.com/version2013/Public ... -sfs3.sfs/>

wine-1.2.1-i486-sfs4.sfs (release 1)
<http://www.wuala.com/version2013/Public ... -sfs4.sfs/>

-----------------------------------------------------------------------------------------------------------

I compiled using puplet: Puppies 4.31.1 by forum member 'ttuuxxx'
I specifically used the files:
puppies-431.1-main-Xserver.iso
devx_430.sfs

puppies-431.1-main-Xserver.iso - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

devx_430.sfs - [forum post] [mirror 1] username:puppy | password:linux (you will have to type it twice) [mirror 2] [mirror 3]

-----------------------------------------------------------------------------------------------------------

Files located at <http://puppylinux.asia/> require a login.
(Username=puppy) (Password=linux)

I installed these packages before compiling:

esound-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

esound_DEV-0.2.41-i486.pet
<http://puppylinux.asia/members/T/486_pe ... 1-i486.pet>

fontconfig-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

fontconfig_DEV-2.7.1-i486-pup4.pet
<http://petstore.puppyspace.org/s4/syste ... 6-pup4.pet>

gnutls+deps-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

gnutls+deps_DEV-2.6.6-i486.pet
<http://puppylinux.asia/members/T/444/gn ... 6-i486.pet>

jack-audio-connection-kit-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

jack-audio-connection-kit_DEV-0.116.1-i486.pet
<http://puppylinux.asia/members/T/444/ja ... 1-i486.pet>

libgphoto2-2.4.6-pup4.pet
<http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>

libgphoto2_DEV-2.4.6-pup4.pet
<http://distro.ibiblio.org/pub/linux/dis ... 6-pup4.pet>

openldap-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

openldap_DEV-2.4.13-i486.pet
<http://puppylinux.asia/members/T/444/op ... 3-i486.pet>

xorg_xorg_full_dri-7.3.pet
<http://distro.ibiblio.org/pub/linux/dis ... ri-7.3.pet>

xorg_xorg_full_dri_DEV-7.3.pet
<http://distro.ibiblio.org/pub/linux/dis ... EV-7.3.pet>

-----------------------------------------------------------------------------------------------------------

When compiling, I used

Code: Select all

./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --build=i486-pc-linux-gnu --x-includes=/usr/X11R7/include --x-libraries=/usr/X11R7/lib --with-x
Menu entries, Color Setter, and other stuff I got from the file 'winegoodies.tar.gz' provided by forum member 'technosaurus'. The only changes I made to the contents of that file were to delete the file 'Wine_regedit.desktop'. That appears to be a duplicate file. I also deleted the file 'winetricks' and replaced it with the updated one.

For help with Gecko,
<http://wiki.winehq.org/Gecko>

I use the console to install packages from <winetricks>. For help with this I use

Code: Select all

winetricks -h
source <http://www.winehq.org/pipermail/wine-de ... 62347.html>

my graphics card is a Nvidia GeForce 8400GS, so I install the 'NVIDIA-190.42-k2.6.30.5-1.pet' from this post.

tlchost
Posts: 2057
Joined: Sun 05 Aug 2007, 23:26
Location: Baltimore, Maryland USA
Contact:

Re: Wine 1.2.1

#109 Post by tlchost »

green_dome wrote: wine-1.2.1-i486-sfs4.sfs (release 1)
<http://www.wuala.com/version2013/Public ... -sfs4.sfs/>
Is there another location for the file? Can not reach the server.

Thanks
Thom

green_dome
Posts: 203
Joined: Tue 06 Jan 2009, 02:49
Contact:

#110 Post by green_dome »

tlchost,
I was having trouble reaching their server too. I can access it now.

Post Reply