Official 4.3.2

Message

#91 Post by **ttuuxxx** » Fri 02 Apr 2010, 21:48

ecube wrote:Test of V2
Suggestions

1. Replace mtPaint Screen Capture with Shot v1.0 having "Window Only"

2. Replace PartView with the enclosed pet which shows mounted drives as default with an option to show all drives. Showing all drives as default is slow on low-end hardware.

ecube

I'll replace PartView, but not Shot, its wayyyyyyy to big for what it does, actually pup-shots http://www.murga-linux.com/puppy/viewtopic.php?p=387985 is 1/2 the size and way better.
But even that at 200kb is too large I could fit about 4-5 real nice small apps in that space, but once again this is a bug fix release. I'm debating on adding lameSMBxplorer 25kb, its starting to work well users are posting. http://murga-linux.com/puppy/viewtopic.php?t=50901
ttuuxxx

abushcrafter · #92 Post by **abushcrafter** » Fri 02 Apr 2010, 21:49

ecube wrote:1. Replace mtPaint Screen Capture with Shot v1.0 having "Window Only"

I would prefer a lot ttuuxxx's powerful Pup-Shots even though it is a few (2?) MBs please.

Minnesota · #93 Post by **Minnesota** » Fri 02 Apr 2010, 22:04

Most important

... please add bejeweled and bubbles to the fun menu

.. we must have play.

Tested printer.. first error.. then I remembered reading you sent a pet fix.. now Brother HL-1440 prints test page fine. Composing and printing is VERY fast, some versions it takes quite a while to get from hitting print to printer.

Thanks.

abushcrafter · #94 Post by **abushcrafter** » Fri 02 Apr 2010, 22:18

You can get rid of gfnrename as it can't cope with spaces when I tried to do a search and replace batch rename. Can you also replace all those Calculators with galculator if you have not all ready? I am also making a large 7z of updates I have for you

and may be a possible extras 7z

.

#95 Post by **ttuuxxx** » Fri 02 Apr 2010, 22:59

Minnesota wrote:Most important ... please add bejeweled and bubbles to the fun menu .. we must have play.

I agree but I can't, Barry dropped tcl/tk from 4.2 when he moved to 4.3, adding those games would bring it back at a cost of around 1.5mb compressed, Sorry, I would but the size cost is too much, when this version is already over budgeted for size.
ttuuxxx

Minnesota · #96 Post by **Minnesota** » Fri 02 Apr 2010, 23:27

Thank you for consideration!

Keep up the good work sir:

#97 Post by **ttuuxxx** » Sat 03 Apr 2010, 00:20

abushcrafter wrote:You can get rid of gfnrename as it can't cope with spaces when I tried to do a search and replace batch rename. Can you also replace all those Calculators with galculator if you have not all ready? I am also making a large 7z of updates I have for you and may be a possible extras 7z .

Whats your updates consist of? I'm not replacing anything that could cripple the system, This is just a quick bug fix release

could your updates be tar.gz or tar.bz2 4 series doesn't have 7z or xarchiver, just xarchive.
hmmm I need to focus mostly on the bugs and get this release finalized.
ttuuxxx

rcrsn51 · #98 Post by **rcrsn51** » Sat 03 Apr 2010, 03:42

Xvesa configuration has been disabled.

DaveS · #99 Post by **DaveS** » Sat 03 Apr 2010, 05:29

James C wrote:Here you go........Dillo pet....

http://murga-linux.com/puppy/viewtopic. ... 239#392239

Thanks. That is an interesting thread re fonts etc too.............

tlchost · #100 Post by **tlchost** » Sat 03 Apr 2010, 08:11

Created bootable USB with V2

no selections available for xvesa video
CUPS gives server-error-internal-error when adding printer
same error after installing printer fix pet

Thom

#101 Post by **ttuuxxx** » Sat 03 Apr 2010, 08:22

tlchost wrote:Created bootable USB with V2

no selections available for xvesa video
CUPS gives server-error-internal-error when adding printer
same error after installing printer fix pet

Thom

hi Thom cups should work fine now, just run it from the menu and only select the first button like below.
If your gui doesn't look like the image below then it wasn't installed properly.
ttuuxxx

#102 Post by **ttuuxxx** » Sat 03 Apr 2010, 08:59

weird didn't post this here. should of been on page 1
ttuuxxx

01micko · #103 Post by **01micko** » Sat 03 Apr 2010, 11:21

Hi ttuuxxx

Sorry if all this has been covered but did you grab all ziggy's bugfixes for 431 from Stardust? Some will be irrelevant due to the seamonkey 2 upgrade.

Cheers

tlchost · #104 Post by **tlchost** » Sat 03 Apr 2010, 11:28

ttuuxxx wrote: hi Thom cups should work fine now, just run it from the menu and only select the first button like below.
If your gui doesn't look like the image below then it wasn't installed properly.
ttuuxxx

Well...I redid everything from scratch, started with a naked V2, redownloaded the fix and installed it...still have the same problem.

I hope V3 works...for me V2 is unworkable.

Thom

stu90 · #105 Post by **stu90** » Sat 03 Apr 2010, 13:34

Good work ttuuxxx -i don't know what goes on under the hood but the new browser and blinky are very welcomed updates to me.

Running fresh 4.3.2-v2 frugal install:
On each bootup/reboot i keep getting an updating files message, (seems to be cups related)
followed by
updating from 431 to 432 message with a 30 second boot delay.
In total adds about a minute to the boot time, maybe my grub files is wrong?

# Linux bootable partition config begins
title pup432-v2
rootnoverify (hd0,0)
kernel /pup432-v2/vmlinuz pmedia=atahd psubdir=pup432-v2
initrd /pup432-v2/initrd.gz
# Linux bootable partition config ends

Since this is a new official puppy here is my desktop

wuwei · #106 Post by **wuwei** » Sat 03 Apr 2010, 13:53

stu90 wrote:

Running fresh 4.3.2-v2 frugal install:
On each bootup/reboot i keep getting an updating files message, (seems to be cups related)
followed by
updating from 431 to 432 message with a 30 second boot delay.

I confirm this. Also Seamonkey replaces Firefox as the defaultbrowser again. And /tmp/versionupgrade does not exist, despite the boot message referring to it.

Hopefully a minor bug.

Happy Easter to y'all.

abushcrafter · #107 Post by **abushcrafter** » Sat 03 Apr 2010, 13:57

ttuuxxx wrote:
abushcrafter wrote:You can get rid of gfnrename as it can't cope with spaces when I tried to do a search and replace batch rename. Can you also replace all those Calculators with galculator if you have not all ready? I am also making a large 7z of updates I have for you and may be a possible extras 7z .
Whats your updates consist of? I'm not replacing anything that could cripple the system, This is just a quick bug fix release could your updates be tar.gz or tar.bz2 4 series doesn't have 7z or xarchiver, just xarchive.
hmmm I need to focus mostly on the bugs and get this release finalized.
ttuuxxx

Ok, bz2 it is. The updates are for apps like asunder, wget, gparted ,aqualung, etc and a few libs.

8-bit · #108 Post by **8-bit** » Sat 03 Apr 2010, 15:21

As with stu90 and abushcrafter, I also get Puppy thinking I am upgrading and saying it is restoring original files.
And they seem to be related to cups.

abushcrafter · #109 Post by **abushcrafter** » Sat 03 Apr 2010, 15:36

8-bit wrote:As with stu90 and abushcrafter, I also get Puppy thinking I am upgrading and saying it is restoring original files.
And they seem to be related to cups.

Sorry I am

.

abushcrafter · #110 Post by **abushcrafter** » Sat 03 Apr 2010, 17:06

You have 14 days to press the red button to download my updates

.

(old)Puppy Linux Discussion Forum

(old)Puppy Linux Discussion Forum

Official 4.3.2

Fun and printer

Re: Fun and printer

Thank you for consideration :)

CUPS and XVESA

Re: CUPS and XVESA

Re: Official 4.3.2

Re: CUPS and XVESA