How to access SD memory card via TI cardbus controller?
Posted: Sun 15 Jan 2006, 17:42
I'm running Puppy 1.0.7 on my Dell m700 almost perfectly. First via CD and then loading fron the USB. After several searches in the forum I found how to enable the Intel 2200 WiFi card.
Since Puppy cannot write to the NTFS harddisk I tried to access my Secure Digital Card to store some files. The card is a PNY 512Mb flash card already formatted for use in my camera (this is FAT, or VFAT?).
Anyway, I just dont find the card listed in any Puppy program. Tryed MUT, PMount, MTools and any related program.
This are the Drives found on the Hardware probe:
/dev/hdc|cdrom|PHILIPS CD-RW/DVD-ROM CDD5263
/dev/hda|disk|WDC WD400VE-75HDT0
/dev/sda|Direct-Access|LEXAR DIGITAL FILM
The last one is the USB pendrive from where I'm running Puppy.
And this is the output from the Query-PCI:
===== parse_pci_devices =====
No info found about the device 8086.4220 (NETWORK - OTHER)!
Please send a snapshot of this window to
puppy@goosee.com. Also read Modules HOWTO.
14e4:170c (2,0) 11 [ Broadcom - BCM4401-B0 100Base-TX ] ETHERNET b44
104c:ac8f (1,128) 0 [ (null) - (null) ] STORAGE - OTHER (null)
104c:802e (12,0) 0 [ (null) - (null) ] SERIAL (null)
104c:ac8e (6,7) 11 [ Texas Instruments - PCI7420 CardBus Controller ] CARDBUS yenta_socket
104c:ac8e (6,7) 11 [ Texas Instruments - PCI7420 CardBus Controller ] CARDBUS yenta_socket
8086:4220 (2,128) 1 [ (null) - (null) ] NETWORK - OTHER (null)
8086:24c6 (7,3) 0 [ (null) - (null) ] COMM PORT (null)
8086:24c5 (4,1) 11 [ Intel - ] AUDIO i810_audio
8086:24c3 (12,5) 0 [ (null) - (null) ] SERIAL (null)
8086:24ca (1,1) 0 [ (null) - (null) ] EIDE (null)
8086:24cc (6,1) 0 [ (null) - (null) ] BRIDGE (null)
8086:2448 (6,4) 0 [ (null) - (null) ] BRIDGE (null)
8086:24cd (12,3) 11 [ Intel - 82801DB USB2 controller ] USB ehci-hcd
8086:24c7 (12,3) 11 [ Intel - USB controller ] USB usb-uhci
8086:24c4 (12,3) 11 [ Intel - 82801DB USB controller2 ] USB usb-uhci
8086:24c2 (12,3) 11 [ Intel - 82801DB USB controller1 ] USB usb-uhci
8086:3582 (3,128) 0 [ (null) - (null) ] DISPLAY (null)
8086:3582 (3,0) 0 [ (null) - (null) ] DISPLAY (null)
8086:3585 (8,128) 0 [ (null) - (null) ] SYSTEM (null)
8086:3584 (8,128) 0 [ (null) - (null) ] SYSTEM (null)
8086:3580 (6,0) 0 [ (null) - (null) ] BRIDGE (null)
These are the modules:
No info found about the device 8086.4220 (NETWORK - OTHER)!
Please send a snapshot of this window to
puppy@goosee.com. Also read Modules HOWTO.
ETHERNET b44 : Broadcom BCM4401-B0 100Base-TX (14e4:170c) running.
CARDBUS yenta_socket: Texas Instruments PCI7420 CardBus Controller (104c:ac8e) running.
CARDBUS yenta_socket: Texas Instruments PCI7420 CardBus Controller (104c:ac8e) running.
AUDIO i810_audio: Intel (8086:24c5) running.
USB ehci-hcd: Intel 82801DB USB2 controller (8086:24cd) running.
USB usb-uhci: Intel USB controller (8086:24c7) running.
USB usb-uhci: Intel 82801DB USB controller2 (8086:24c4) running.
USB usb-uhci: Intel 82801DB USB controller1 (8086:24c2) running.
Can anybody give me some direction to have this solved?
Thanks,
elcano
Since Puppy cannot write to the NTFS harddisk I tried to access my Secure Digital Card to store some files. The card is a PNY 512Mb flash card already formatted for use in my camera (this is FAT, or VFAT?).
Anyway, I just dont find the card listed in any Puppy program. Tryed MUT, PMount, MTools and any related program.
This are the Drives found on the Hardware probe:
/dev/hdc|cdrom|PHILIPS CD-RW/DVD-ROM CDD5263
/dev/hda|disk|WDC WD400VE-75HDT0
/dev/sda|Direct-Access|LEXAR DIGITAL FILM
The last one is the USB pendrive from where I'm running Puppy.
And this is the output from the Query-PCI:
===== parse_pci_devices =====
No info found about the device 8086.4220 (NETWORK - OTHER)!
Please send a snapshot of this window to
puppy@goosee.com. Also read Modules HOWTO.
14e4:170c (2,0) 11 [ Broadcom - BCM4401-B0 100Base-TX ] ETHERNET b44
104c:ac8f (1,128) 0 [ (null) - (null) ] STORAGE - OTHER (null)
104c:802e (12,0) 0 [ (null) - (null) ] SERIAL (null)
104c:ac8e (6,7) 11 [ Texas Instruments - PCI7420 CardBus Controller ] CARDBUS yenta_socket
104c:ac8e (6,7) 11 [ Texas Instruments - PCI7420 CardBus Controller ] CARDBUS yenta_socket
8086:4220 (2,128) 1 [ (null) - (null) ] NETWORK - OTHER (null)
8086:24c6 (7,3) 0 [ (null) - (null) ] COMM PORT (null)
8086:24c5 (4,1) 11 [ Intel - ] AUDIO i810_audio
8086:24c3 (12,5) 0 [ (null) - (null) ] SERIAL (null)
8086:24ca (1,1) 0 [ (null) - (null) ] EIDE (null)
8086:24cc (6,1) 0 [ (null) - (null) ] BRIDGE (null)
8086:2448 (6,4) 0 [ (null) - (null) ] BRIDGE (null)
8086:24cd (12,3) 11 [ Intel - 82801DB USB2 controller ] USB ehci-hcd
8086:24c7 (12,3) 11 [ Intel - USB controller ] USB usb-uhci
8086:24c4 (12,3) 11 [ Intel - 82801DB USB controller2 ] USB usb-uhci
8086:24c2 (12,3) 11 [ Intel - 82801DB USB controller1 ] USB usb-uhci
8086:3582 (3,128) 0 [ (null) - (null) ] DISPLAY (null)
8086:3582 (3,0) 0 [ (null) - (null) ] DISPLAY (null)
8086:3585 (8,128) 0 [ (null) - (null) ] SYSTEM (null)
8086:3584 (8,128) 0 [ (null) - (null) ] SYSTEM (null)
8086:3580 (6,0) 0 [ (null) - (null) ] BRIDGE (null)
These are the modules:
No info found about the device 8086.4220 (NETWORK - OTHER)!
Please send a snapshot of this window to
puppy@goosee.com. Also read Modules HOWTO.
ETHERNET b44 : Broadcom BCM4401-B0 100Base-TX (14e4:170c) running.
CARDBUS yenta_socket: Texas Instruments PCI7420 CardBus Controller (104c:ac8e) running.
CARDBUS yenta_socket: Texas Instruments PCI7420 CardBus Controller (104c:ac8e) running.
AUDIO i810_audio: Intel (8086:24c5) running.
USB ehci-hcd: Intel 82801DB USB2 controller (8086:24cd) running.
USB usb-uhci: Intel USB controller (8086:24c7) running.
USB usb-uhci: Intel 82801DB USB controller2 (8086:24c4) running.
USB usb-uhci: Intel 82801DB USB controller1 (8086:24c2) running.
Can anybody give me some direction to have this solved?
Thanks,
elcano