Slackpup 0.4 beta

Please post any bugs you have found
Message
Author
aarf

#16 Post by aarf »

opera-10.60-6386.i386.linux
/tmp/xerrs.log

Code: Select all

The program 'operapluginwrapper' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadWindow (invalid Window parameter)'.
  (Details: serial 383492 error_code 3 request_code 3 minor_code 0)
  (Note to programmers: normally, X errors are reported asynchronously;
   that is, you will receive the error a while after causing it.
   To debug your program, run it with the --sync command line
   option to change this behavior. You can then get a meaningful
   backtrace from your debugger if you break on the gdk_x_error() function.)
havent noticed this youtube video stopper before use in spup although it may be elsewhere as well. stops video and need to reload the page to restart but on long videos of 10 min still unable to get past about half way before the error stops the video.


EDIT; finally got this down. trick is not to resize, move, open or refresh any widows while the video is playing. dont touch anything at all just watch the video.
also be sure the pupsave has enough space for the video go into /tmp after it downloads then you can copy the flash file out of /tmp and play it in gnomeplayer. (and edit it in openshot)
you2pup downloader is failing for me at present.

aarf

#17 Post by aarf »

pwidgets-2.3.0.pet only displays the analog clock.
wifi is holding very well.
general opera web browsing is not resulting many crashes.
overall good stable impression.
fsck is clean.
edit: so i did another right after this post this is the partition that contains only opera
:

Code: Select all

# fsck -f /dev/sdb2
fsck 1.41.11 (14-Mar-2010)
e2fsck 1.41.11 (14-Mar-2010)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
Free blocks count wrong for group #19 (3422, counted=3423).
Fix<y>? yes

Free blocks count wrong for group #26 (1748, counted=1749).
Fix<y>? yes

Free blocks count wrong for group #29 (4580, counted=4581).
Fix<y>? yes

Free blocks count wrong (56465, counted=56468).
Fix<y>? yes


opera: ***** FILE SYSTEM WAS MODIFIED *****
opera: 2693/62496 files (34.2% non-contiguous), 193516/249984 blocks
# 
edit: lupu500 fails the same way "Free blocks count wrong"on fsck as well
Last edited by aarf on Mon 05 Jul 2010, 21:41, edited 1 time in total.

User avatar
piratesmack
Posts: 100
Joined: Wed 16 Sep 2009, 14:22

#18 Post by piratesmack »

Thanks, Slackware and Puppy are my 2 favorite distros.

I'm having one problem. The acpi-cpufreq kernel module fails to load with the error 'no such device', so I can't use speedstep on my netbook.

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#19 Post by BarryK »

stu90 wrote:

Code: Select all

Does this version have duel core support as only picking up single core on
Processor: AMD Turion(tm) 64 X2 Mobile Technology TL-50[/quote]

No, the 2.6.34 kernel was configured with SMP disabled. The next release of Slackpup will have an SMP-enabled kernel.
[url]https://bkhome.org/news/[/url]

User avatar
tazoc
Posts: 1157
Joined: Mon 11 Dec 2006, 08:07
Location: Lower Columbia Basin WA US
Contact:

Re: Slackpup 0.3 beta

#20 Post by tazoc »

BarryK wrote:Find the bugs!
All those great packages on the Quirky repo can't be accessed in PPM. Slackware, Woof and Wary, but not Quirky.
-TazOC
[url=http://www.lhpup.org/][b][size=100]lhpup.org[/size][/b] [img]http://www.lhpup.org/gallery/images/favicon.png[/img][/url] [url=http://www.lhpup.org/release-lhp.htm#602]Lighthouse 64 6.02[/url]

User avatar
wuwei
Posts: 800
Joined: Sat 15 Sep 2007, 11:59
Location: formerly de; now in tranquility

#21 Post by wuwei »

Nouveau driver works very well, almost "out of the box" on nVidia GF 6200.

pppoe-start does not work. Couldn't get it to start, neither with fixed nor with dynamic DNS. This is usually no problem, e.g. in Quirky 1.2.

JustGreg
Posts: 782
Joined: Tue 24 May 2005, 10:55
Location: Connecticut USA

#22 Post by JustGreg »

I tried Slackpup 0.3 out. I found the nv driver worked the best with Nvidia Ion Chipset (also id as MCP79 Board -hornet-0 Chip Rev). It went into 1360 by 768 resolution with no problems and a nice clean display.

The nouveau driver also worked but with a problem. The screen goes to 1360 by 768 resolution. Small color bars appear and stay on the screen as applications are open and closed.

I have also got Nvidia 256.35 version official driver to work with Spup 020. However, I have not been able to make a pet that works. xorgwizard keeps picking nouveau, even if nvidia has been specified.
Last edited by JustGreg on Mon 05 Jul 2010, 23:19, edited 1 time in total.
Enjoy life, Just Greg
Live Well, Laugh Often, Love Much

User avatar
rjbrewer
Posts: 4405
Joined: Tue 22 Jan 2008, 21:41
Location: merriam, kansas

#23 Post by rjbrewer »

It does 1280 x 800 or 1024 x 768 Xorg , and 1024 x 768 Vesa fine.

Also will run the 4.3x Vlc-lite .pet that I prefer (as does Fluppy).

A weird little crash: The Google 4th of July animation turned to
black and once caused a freeze of window.
Attachments
video-report.jpg
(34.15 KiB) Downloaded 1069 times

Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs

User avatar
gjuhasz
Posts: 422
Joined: Mon 29 Sep 2008, 14:28

#24 Post by gjuhasz »

wuwei wrote:Nouveau driver works very well, almost "out of the box" on nVidia GF 6200.
JustGreg wrote:I have also got Nvidia 256.35 version official driver to work with Spup 020. However, (...) xorgwizard keeps picking nouveau, even if nvidia has been specified.
Force X to use vesa. Then blacklist both nv and nouveau. Then install the proprietary nvidia driver.

JustGreg, I am eager to see how my nvidia gf 6200 card works with your nvidia pet. I can play with this tomorrow.
(To tell the truth, I am not sure which version is the best one for spup... I will begin with nvidia_lucid-195.36.24-k2.6.33.2-p5.pet but will give a chance to CatDude's NVIDIA-173.14.25-k2.6.33.2-1.pet, too. I see both supports my card but spup's kernel is different. Is there an nvidia pet compiled for 2.6.34?)

User avatar
Ray MK
Posts: 774
Joined: Tue 05 Feb 2008, 09:10
Location: UK

#25 Post by Ray MK »

Hi

Just to let you know Spup030 seems to work well on my Acer Travelmate 243LC - with one exception - can't get touchpad tapping to work.

Tried all the usual options including mouse setup and editing taptime in Xorg.conf - but no go.

Otherwise very nice.

JFYI - Wary030 just works extremely well on this machine - I use it most of the time now.

Looking forward to the next Spup with the later kernel and all the BK fixes, when it becomes available.

As always - many thanks for this and very best regards - Ray

ICPUG
Posts: 1308
Joined: Mon 25 Jul 2005, 00:09
Location: UK

#26 Post by ICPUG »

Ray MK

I had this touchpad problem with the latest Lighthouse Pup too. My xorg.conf looks right - maxtaptime=220 - but it doesn't work.

Don't know solution yet but I am going to check this, which DaveS found solved another touchpad problem with Lucid puppy.

Quote:

Major problems with touchpad in Luci and Quirky, but NOT Qret. Enabling the touchpad creates a hidden file in root .flSynclient which contains the settings user specified via the setup process. In Quirky and Luci it contains a line by default:

ClickFinger3 =2

Change this to:

ClickFinger3 =1

And everything works perfectly. Cant seem to set this via the GUI though. Bug? Non-user settable?

Warning.... If you change anything via the GUI, it resets automatically to value '2' again.

endquote

JustGreg
Posts: 782
Joined: Tue 24 May 2005, 10:55
Location: Connecticut USA

#27 Post by JustGreg »

For gjuhasz,

You will have to wait a bit. Slackpup uses a newer kernel (2.6.34). The pets that CatDude and I made are for the Lucid kernel (2.6.33.2). They will probably not work.

I have started on the Nvidia 256.35 pet for Slackpup. The life has gotten busy for me. I should have it ready next week around Tuesday. I will be away from the computer for most of the week with my bride of thirty-seven years.
Enjoy life, Just Greg
Live Well, Laugh Often, Love Much

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#28 Post by BarryK »

JustGreg wrote:I will be away from the computer for most of the week with my bride of thirty-seven years.
Have fun!
[url]https://bkhome.org/news/[/url]

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#29 Post by edoc »

Just loaded it on my Panasonic Toughbook CF-29 and it is working well.
No problems with the video driver or the Wifi.
I did update Flash so that some difficult sites would render correctly.
Otherwise so far so good!

EDIT

Sorry to report a problem ...

When I tried Menu-System-Pprocess it froze the keyboard and mouse - it required a CTRL-Backspace to get a prompt and then "xwin" restored the desktop.

Good news ... Barry's Simple Network Setup appears to be remembering the connection (not the case in Wary 030 and Lucid 501 on this laptop).
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#30 Post by BarryK »

wuwei wrote:Nouveau driver works very well, almost "out of the box" on nVidia GF 6200.

pppoe-start does not work. Couldn't get it to start, neither with fixed nor with dynamic DNS. This is usually no problem, e.g. in Quirky 1.2.
wuwei,
Would you please try this:
http://bkhome.org/blog/?viewDetailed=01701
[url]https://bkhome.org/news/[/url]

User avatar
wuwei
Posts: 800
Joined: Sat 15 Sep 2007, 11:59
Location: formerly de; now in tranquility

#31 Post by wuwei »

Hello Barry,

I did try, unfortunately unsuccessfully.

Here is what I did:

Loaded a fresh spup with pfix=ram from a subdirectory on my Puppy partition. Nouveau driver again worked fine with GeForce 6200 LE.

Then I tried the 4 steps from your post here
http://bkhome.org/blog/?viewDetailed=01701

# modprobe pppoe in terminal did not respond.

According to this
http://www.lampdocs.com/home-personal/pppoe-connection/

one would now "need to create a kernel module". This is a bit over my head, at least without spending a lot of time. Guess the entire procedure was now impossible to continue. Still I tried #2 and #3 on your list.

When I got to #4
# pppd call myprov
this was the output
# pppd call myprov
pppd: error while loading shared libraries: libpcap.so.1: cannot open shared object file: No such file or directory
# whereis pppd
bash: whereis: command not found
#
libpcap.so.1 is not in spup.

Sorry, this is as far as I got tonight.
Off to watch the soccer semi finals, now. :lol:

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#32 Post by edoc »

I had high hopes that a fresh install of SPUP 030 would finally fix the CUPS problem.

CUPS in SPUP 030 cannot handle an Add Printer request.

It cannot find localhost:631 - it generates a "404 Not Found"

Very weird ... Any suggestions, please?

EDIT


I just read some more and have discovered that the CUPS problem may be a carry-forward unresolved problem from SPUP 020.

I even tried upgrading via Puppy Package Manager to CUPS 1.4.3 -- but no joy. :-(

EDIT2

I went back to Wary 030, remembering that I had fixed the shortage of HDD space, and tried CUPS and it worked!

I noticed that CUPS popped up a Username/Password window - it did not do that in SPUP 030 - is it possible that the CUPS failure in SPUP 030 (and 020 before that) is due to a problem with the login to localhost:631?

EDIT3

Here are three proposed solutions to a CUPS localhost:631 failure which may lead to a solution under SPUP:
Try /etc/rc.d/rc.cups start
maybe http://127.0.0.1:631 will work?
Check /usr/local/etc/pam.d/cups -- change it to use pam_unix rather than
pam_unknown. (pam_unknown is, errr..., unknown on FreeBSD...)
Like this:

auth required pam_unix.so nodelay
account required pam_unix.so
EDIT4

THIS opens up the CUPS Administration page:

https://localhost:631/admin

Of course one must plow through a BUNCH of security pop-ups whining about Certificates, etc.

Does the fact that this appears to bypass the 404 ERROR help to ID the problem with CUPS in SPUP 030?

On further investigation while CUPS in Wary 030 will communicate with my HP LaserJet P1006 printer using the fooxxx_r220909-0.0-i486.pet this one will not.

I will try the proprietary HP driver but it seems that if fooxxx_r220909-0.0-i486.pet is effective in CUPS under Wary 030 then it should also be under SPUP 030.

I hate to clutter things with too much probably-conflicting CUPS junk!

EDIT5

I could find no combination of hplite versions and fooxxx_r220909-0.0-i486.pet and etc. that even within the https://localhost:631/admin workaround would result in the ability to use my HP Laserjet P1006 printer.

It is working fine in Wary 030 with just fooxxx_r220909-0.0-i486.pet

Sure would like to be able to use SPUP!

SOLVED!

Upgraded to SPUP 040. Thanks Barry!
Last edited by edoc on Wed 14 Jul 2010, 17:47, edited 2 times in total.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#33 Post by BarryK »

wuwei wrote:Hello Barry,

I did try, unfortunately unsuccessfully.

Here is what I did:

Loaded a fresh spup with pfix=ram from a subdirectory on my Puppy partition. Nouveau driver again worked fine with GeForce 6200 LE.

Then I tried the 4 steps from your post here
http://bkhome.org/blog/?viewDetailed=01701

# modprobe pppoe in terminal did not respond.

According to this
http://www.lampdocs.com/home-personal/pppoe-connection/

one would now "need to create a kernel module". This is a bit over my head, at least without spending a lot of time. Guess the entire procedure was now impossible to continue. Still I tried #2 and #3 on your list.

When I got to #4
# pppd call myprov
this was the output
# pppd call myprov
pppd: error while loading shared libraries: libpcap.so.1: cannot open shared object file: No such file or directory
# whereis pppd
bash: whereis: command not found
#
libpcap.so.1 is not in spup.

Sorry, this is as far as I got tonight.
Off to watch the soccer semi finals, now. :lol:
The pppoe kernel module exists:

Code: Select all

# modinfo pppoe
filename:       /lib/modules/2.6.34/kernel/drivers/net/pppoe.ko
alias:          net-pf-24
license:        GPL
description:    PPP over Ethernet driver
author:         Michal Ostrowski <mostrows@speakeasy.net>
depends:        pppox,ppp_generic
vermagic:       2.6.34 mod_unload 486 
#
So, load it:

Code: Select all

# modprobe pppoe
#
...it is now loaded. So, Step 1 works ok.

As for pppd:

Code: Select all

# which pppd
/usr/sbin/pppd
# ldd /usr/sbin/pppd
	linux-gate.so.1 =>  (0xffffe000)
	libcrypt.so.1 => /lib/libcrypt.so.1 (0xb76c7000)
	libdl.so.2 => /lib/libdl.so.2 (0xb76c3000)
	libpcap.so.1 => not found
	libc.so.6 => /lib/libc.so.6 (0xb7554000)
	/lib/ld-linux.so.2 (0xb76fb000)
# 
Ah, that would also explain why someone reported that dialup with a modem does not work! pppd is broken!

SOLUTION:
Need Internet connection, run Puppy Package Manager, install package 'tcpdump' from the official Slackware repository.
Then you will have libpcap.so.1.

Then you will probably find the the previous pppoe-start works, but I would appreciate if you can test the method I posted also, see if that works.

Thanks for the feedback.
[url]https://bkhome.org/news/[/url]

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#34 Post by edoc »

I am having an interesting time talking to myself about the CUPS problem in SPUP 030 but it is getting boring.

Has CUPS been abandoned in SPUP?

I know that Barry has elsewhere expressed frustration at CUPS being a chronic nuisance - and I agree for sure!

It would be helpful to flag the lack of CUPS before one downloads, installs, and wastes time fighting to get it working in SPUP if it is both a lost-cause and a non-goal for the development of SPUP.

If CUPS is being abandoned is there a pending-alternative to CUPS planned for SPUP?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#35 Post by edoc »

Great news!

When he returns to the keyboard I presume there will be a .PET or some other means to upgrade our SPUP 030 installs.

Thanks Barry!

http://bkhome.org/blog/?viewDetailed=01707
Posted on 9 Jul 2010, 2:04 by BarryK
Printing works
Finally got printing working!

It took awhile, I had to fix foomatic-filters and ghostscript packages.

Local time is after 1.00am, time for a cup of green tea, wind-down the mind for awhile, then bed.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

Post Reply