Kdenlive 0.7.8 (rev. 4559) and KDE 4.4.4 SFS

[aarf]

yes now works for me in puppeee,
playback of imported video inside kdenlive is a little choppy, and the rendered output sound track cutout at less than halfway but that may be video specific.
video test file is the opera /tmp file of lobsters Lucid dream
http://www.youtube.com/watch?v=xb_nUn5OMbs
when using opera you can pull its local temporary file out of /tmp as something like FlashXXXxxx then play it in gnome-player, however it will not play in gxine. kdenlive will import it and render it to mp4. gxine will then play it with noted partial soundtrack. it being untitled.mp4

Code: Select all

# ffmpeg -i untitled.mp4
FFmpeg version SVN-r23652-snapshot, Copyright (c) 2000-2010 the FFmpeg developers
  built on Jun 20 2010 19:12:42 with gcc 4.3.4
  configuration: --prefix=/usr --cpu=i686 --enable-libmp3lame --enable-libx264 --enable-libfaac --enable-libfaad --enable-pthreads --enable-small --enable-postproc --enable-libvorbis --enable-gpl --enable-shared --enable-nonfree --enable-libopencore-amrnb --enable-libopencore-amrwb --disable-debug --enable-bzlib --enable-zlib --enable-libspeex --enable-version3 --enable-runtime-cpudetect --enable-x11grab --enable-libdc1394 --enable-libschroedinger --enable-libtheora --enable-libxvid --enable-swscale --enable-libvpx
  libavutil     50.19. 0 / 50.19. 0
  libavcodec    52.77. 0 / 52.77. 0
  libavformat   52.68. 0 / 52.68. 0
  libavdevice   52. 2. 0 / 52. 2. 0
  libavfilter    1.20. 0 /  1.20. 0
  libswscale     0.11. 0 /  0.11. 0
  libpostproc   51. 2. 0 / 51. 2. 0
Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'untitled.mp4':
  Metadata:
    major_brand     : isom
    minor_version   : 512
    compatible_brands: isomiso2mp41
    encoder         : Lavf52.68.0
  Duration: 00:01:14.57, start: 0.000000, bitrate: 1122 kb/s
    Stream #0.0(und): Video: mpeg4, yuv420p, 1440x1080 [PAR 4:3 DAR 16:9], 992 kb/s, 25 fps, 25 tbr, 25 tbn, 25 tbc
    Stream #0.1(und): Audio: mp3, 44100 Hz, 2 channels, s16, 127 kb/s
At least one output file must be specified
# 

will ask jemimah if she is interested in updating puppeee to the ffmpeg of/with your pet.

[aarf]

untitled.mp4 from above is at http://www.datafilehost.com/download-1c0e2d43.html

[aarf]

untitled.mp4 from above is at http://www.datafilehost.com/download-1c0e2d43.html

note that sound for untitled.mp4 is all the way through when played in mplayer-post-1.0rc3-svn-31792-i486.pet but only partly through in gxine.
mplayer-post-1.0rc3-svn-31792-i486.pet also plays the original flashxxx straight out of /tmp

[battleshooter]

Thanks for the detailed bug report Aarf. I'll try and find some time to figure out the fix. Hope it's not too pressing at the moment

Battleshooter

[aarf]

Thanks for the detailed bug report Aarf. I'll try and find some time to figure out the fix. Hope it's not too pressing at the moment

Battleshooter

only a matter of interest and testing for me, or bugs for the individual program developers to look into.

[enhu]

will this work in lupu?

[battleshooter]

Haven't tried it yet. If you do give it ago, make sure it's on a clean pupsave, don't want to mess up your setup.

Battleshooter

[enhu]

tried it. but then boot manager can't even see the sfs.

[battleshooter]

Did you rename the SFS?

Battleshooter

[dejan555]

I'll be testing this soon as I now need some video editor, which quirky did you use this with? Newest quirky is built with wary packages and I don't like that I'd rather use older quirky. I'll see if I can mirror sfs on xrter's server too

EDIT:Ok, I'm downloading quirky 1.2

[oui]

Hi battleshooter

a really wonderfull SFS really.

I did have difficulties to start as indicated and did enter

Code: Select all

/usr/KDE-4/bin/startkde

and after that create a link

Code: Select all

ln -s /usr/KDE-4/bin/startkde /usr/bin/kde

so that I can enter

Code: Select all

kde

in the console

or

add it in /root/.jwmrc in the block

Code: Select all

<StartupCommand>
kde
</StartupCommand>

In this case puppy goes immediately after the wm start in kde.

To exit kde

I only did find the way to enter

exec wmreboot

or

exec wmpoweroff

Code: Select all

wmexit

to restart the usual Quirky desktop with

Code: Select all

xwin

it seem not to be possible to use the sfs with the newest quirky probably because the arrangement and management of the files in the ISO are different?

thank you for this great work (because I am a fervent user of Konqueror as long as I am working on translation, text comparaisons etc. because it is possible to split the text as in the most applications of KDE

the KDE office did reappear in Debian. I did install it Debian-Testing Squeeze and SID. KDE office ist light compared with LibreOffice. about the same as the newest versions of Gnome office depending of the preinstalled depencies. perhaps a way to make a powerfull environment without to much installed stuff

but I would not renounce to JWM but give both possibilities: jwm or kde.

it would be great to have a woof with kde and kde office instead of Gnome office and different window managers

salut

[battleshooter]

Ah great, glad to know you found the SFS useful Oui

I've been meaning to post a whole heap of fixes Triminh has been helping me find including the shutdown fix but I have been very lazy :\

Hmm, no, I will not be doing a KDE sfs for Woof. Woof is made for older hardware, and well, KDE is so much bling and requires relatively good modern hardware to be used the way it was designed. Basically KDE4 is notorious for eating resources and Woof is for computers with little resources. So no, I'm not planning on making a Woof KDE4 sfs. I might make a Lupu one, but not Woof, sorry

Yeah, I don't think this SFS will work on other Quirkys. Barry changed the structure and kernels quite a bit.

Thanks for you feed back though

Battleshooter

[oui]

Hi Battleshooter

Thank you for your reply

Other user can find your link for your *.sfs in this discussion and the ISO of Quirky Linux here:

http://distro.ibiblio.org/pub/linux/dis ... uirky-1.2/

.

[battleshooter]

Other user can find your link for your *.sfs in this discussion and the ISO of Quirky Linux here:

http://distro.ibiblio.org/pub/linux/dis ... uirky-1.2/

Errr, sorry Oui, not quite sure what you are saying.. could you rephrase for this puzzled brain please?

Battleshooter

[einar]

Did anyone get to test this on lucid 5.2 ?

[battleshooter]

I have not tested it on Lupu 5.2 yet. Aarf tried it on Lupu 511 though, but the results were a little flawed. I haven't actually tried out Lupu 5.2 yet.. I'm looking forward to it though.

Battleshooter

[oui]

Hi Elnar

It appears that the big kdenlive.sfs is really dependent of the structure of the files in the ISO of Quirky 1.2.
Barry Kauler did reorganize that in Quirky 1.3 and following in Quirky 1.4. It seems it is no way back to the old structure (excepted perhaps through remastering the ISO as Quirky 1.2 did that but with the content of other other Puppys in the adequate directories! a real adventure!)

For other Puppy's you will have the same difficulties that the file structure has to be the same and the contents about the same as in Quirky 1.2.

hm, you can try it. it is really easy to link a *.sfs to a frugal installation!

Other user can find your link for your *.sfs in this discussion and the ISO of Quirky Linux here:

http://distro.ibiblio.org/pub/linux/dis ... uirky-1.2/

Errr, sorry Oui, not quite sure what you are saying.. could you rephrase for this puzzled brain please?

Battleshooter

I would recommend to add the direct link to the quirky 1.2 download in your first message:

SFS Download
md5sum: 59d0f036d307567718c9003139bdfb23

Iso download:

http://distro.ibiblio.org/pub/linux/dis ... uirky-1.2/

This is in a way, a standalone Kdenlive package for Quirky. But at the same time, it's not a cut down KDE libs deal. It has a working KDE desktop, with basic applications like Dolphin, Konqurer, and Konsole.

Headers are all included so add the Quirky devx file and you're already to compile KDE apps or more modules. I've already done KDE_Multimedia if anyone's interested in that I'll upload it.

etc...

I have a little problem:

- sometimes all the available KDE applications appear in the JWM menu
- and sometimes not

what is to do to make the entries really permanent?

and I would be very interesting to add more KDE applications especially kopete because of the good skype and webcam integration and probably perhaps the KDE office (reappeared in Debian testing! and I have to change to Debian to use them)

can you give recommendations what is to do for it?

from witch repository (url) are the package or sources you did use to find the same complements?

kind regards

[oui]

Hi

Little progress:

I did add 2 icons founded on

http://www.linupedia.org/opensuse/Dolphin

and

http://www.linupedia.org/opensuse/Kdenlive

in the icons directory (I did not found some good icon for kwrite) and add this directory in

/etc/xdg/templates/_root_.jwmrc

as following

Code: Select all

	<!-- <Icons> -->
	<!--	<IconPath>$HOME/.icons</IconPath> -->
		<IconPath>/usr/local/lib/X11/mini-icons</IconPath>
		<IconPath>/usr/local/lib/X11/pixmaps</IconPath>
		<IconPath>/usr/share/pixmaps</IconPath>
		<IconPath>/usr/local/share/pixmaps</IconPath>
	<IconPath>/usr/KDE-4/share/icons/default.kde4/48x48/apps</IconPath>
	<!-- </Icons> -->

	<StartupCommand>
	<!--     setxkbmap -layout us -variant intl &
		oclock & -->
		skype &
		/usr/sbin/ayttmshell &
	</StartupCommand>

(I show also my startup command because I have a little problem with ayttm: it starts but it starts full sized and I would prefer it would start only as icon minimized in the system tray like skype)

but I have to redefine a lot of lines manually in /root/.jwmrc and it is not really optimal.

And if the lines containing the icons addresses and command for

kwrite
konsole
dolphin
kNetAttach (why this in Puppy?)
konqueror
Dragonplayer
Juk
kdenlive

are disappearing it is necessary to (des)install somewhat (needed or not ) to make the reappears again and then all the lines in the menu are new and have to be reamended manually again (names of icons coming wrong into the /root/.jwmrc)

I don't know the place where to amend and eliminate this repeated error!

salut

[sazeile]

I was able to get the Kdenlive SFS to work with Lucid Puppy 5.2.0.

However, in the Kdenlive config wizard it shows on the Checking MLT Engine page a red X beside the installed modules for:

QImage Module
Title Module

I can edit clips but when I try to create a title clip the "OK" button is grayed out.

The Kdenlive site indicates that this is due to the missing modules and they suggest:

For titles it is necessary to have "qimage" and "kdenlivetitle".
If one is missing you need to install a different MLT package or compile it with qimage support enabled.


It looks like the SFS has mlt-0.5.6.

Could the MLT be updated or recompiled with qimage support in the SFS?

Thanks,

Steve

[oui]

Hi

I did post here

http://www.murga-linux.com/puppy/viewtopic.php?t=67597

4 print screen showing my kde 4.4.4 from above SFS in action!

the 1. link shows mTpaint working to make and being processing the print screen

the 2. link shows the KDE desktop

the 3. link shows different applications opened but I did forget to show wine and libre office working under KDE 4.4.4

I did complete it in the 4. link

you can see the most little windows browser of the Windows word in action under Wine (it is not only little: it is COMPLETELY independent from I.E.!!!)

you can see right in the task bar the quick start icone from the only-windows-world Mozilla browser named K-meleon (both browsers can process the windows favorites as they are) but I am sorry to report that it does not work very well under wine

you can see libre office writer in action.

next message:

recommendations concerning KDE usage!