CPUtemp - A CPU Temperature Monitor
modprobe w83627hf produced no output in the terminal. (it acts as if I just hit enter without typing anything)
CPU: AMD Athlon(tm) XP 2000+ (1.667 MHz)
Edit: Just tried clicking on the flame icon again and it is now producing output! Not sure why. Thanks.
Tried typing "sensors" at the command prompt and got the same identical output as your CPUtemp program. (when I tried that before installing your pet it produced nothing)
Did this pet include the lm-sensors when I installed it?
Perhaps OT, but would also like to get the hddtemp to work.
CPU: AMD Athlon(tm) XP 2000+ (1.667 MHz)
Edit: Just tried clicking on the flame icon again and it is now producing output! Not sure why. Thanks.
Tried typing "sensors" at the command prompt and got the same identical output as your CPUtemp program. (when I tried that before installing your pet it produced nothing)
Code: Select all
sh-4.1# sensors
w83697hf-isa-0290
Adapter: ISA adapter
in0: +1.78 V (min = +0.10 V, max = +2.05 V)
in2: +3.36 V (min = +0.64 V, max = +2.66 V) ALARM
in3: +3.02 V (min = +0.00 V, max = +0.58 V) ALARM
in4: +3.12 V (min = +0.00 V, max = +0.51 V) ALARM
in5: +0.54 V (min = +0.51 V, max = +0.00 V) ALARM
in6: +0.85 V (min = +0.00 V, max = +0.00 V) ALARM
in7: +3.33 V (min = +0.00 V, max = +0.06 V) ALARM
in8: +3.44 V (min = +0.58 V, max = +1.41 V) ALARM
fan1: 1939 RPM (min = 9375 RPM, div = 4) ALARM
fan2: 0 RPM (min = 1739 RPM, div = 4) ALARM
temp1: +33.0 C (high = +8.0 C, hyst = +2.0 C) ALARM sensor = thermistor
temp2: +36.5 C (high = +80.0 C, hyst = +75.0 C) sensor = thermistor
beep_enable: enabled
Did this pet include the lm-sensors when I installed it?
Perhaps OT, but would also like to get the hddtemp to work.
So do I go to /usr/local/bin/CPUtemp and edit line 5? What exactly do I put there?
Code: Select all
modprobe w83627hf
OK, I get it now. It wouldn't work after reboot until I edited the CPUtemp file. Works great now. Thanks!rcrsn51 wrote:So do I go to /usr/local/bin/CPUtemp and edit line 5? What exactly do I put there?Code: Select all
modprobe w83627hf
hi,
A little feedback.
Can you make separate pets : lm_sensors and your application , so it doesn't get mixed ?
It worked : I run sensors-detect , in the end it says
I run the modprobe it87 as asked above and then typing "sensors" shows :
It seems the in6: ALARM is a bug, since, it's normal ?
Another bug : +5V: +3.01 V...
The CPU temperatures seem correct.
A little feedback.
Can you make separate pets : lm_sensors and your application , so it doesn't get mixed ?
It worked : I run sensors-detect , in the end it says
Code: Select all
To load everything that is needed, add this to one of the system
initialization scripts (e.g. /etc/rc.d/rc.local):
#----cut here----
# Chip drivers
modprobe it87
/usr/local/bin/sensors -s
#----cut here----
Code: Select all
# /usr/local/bin/sensors
it8718-isa-0228
Adapter: ISA adapter
in0: +1.04 V (min = +0.00 V, max = +4.08 V)
in1: +1.84 V (min = +0.00 V, max = +4.08 V)
in2: +3.33 V (min = +0.00 V, max = +4.08 V)
+5V: +3.01 V (min = +0.00 V, max = +4.08 V)
in4: +3.04 V (min = +0.00 V, max = +4.08 V)
in5: +3.22 V (min = +0.00 V, max = +4.08 V)
in6: +4.08 V (min = +0.00 V, max = +4.08 V) ALARM
in7: +2.00 V (min = +0.00 V, max = +4.08 V)
Vbat: +3.20 V
fan1: 2303 RPM (min = 10 RPM)
fan2: 0 RPM (min = 0 RPM)
fan3: 0 RPM (min = 0 RPM)
fan4: 0 RPM (min = 0 RPM)
temp1: +34.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor
temp2: +39.0 C (low = +127.0 C, high = +70.0 C) sensor = thermal diode
temp3: +47.0 C (low = +127.0 C, high = +127.0 C) sensor = thermistor
cpu0_vid: +1.050 V
intrusion0: OK
Another bug : +5V: +3.01 V...
The CPU temperatures seem correct.
I'd rather not. I slightly modify the sensors binary to be compatible with the CPUtemp script. It works better if they are packaged together. If you look in CPUtemp, you will see the full path /usr/local/bin/sensors so it doesn't use some other version already installed.linuxcbon wrote:Can you make separate pets : lm_sensors and your application , so it doesn't get mixed ?
There are ways of fine-tuning sensors so the output makes sense with your hardware.It seems the in6: ALARM is a bug, since, it's normal ?
Another bug : +5V: +3.01 V...
The CPU temperatures seem correct.
Not all processors need this module.I run the modprobe it87 as asked above
Add them to what? BK has retired.I will ask Barry to add the modprobe and your application...
What did you modify ? Ok so there can be 2 "sensors" , one in /usr/bin and one in /usr/local/bin ?rcrsn51 wrote:I'd rather not. I slightly modify the sensors binary to be compatible with the CPUtemp script. It works better if they are packaged together. If you look in CPUtemp, you will see the full path /usr/local/bin/sensors so it doesn't use some other version already installed.
rcrsn51 wrote:There are ways of fine-tuning sensors so the output makes sense with your hardware.
How ?
To any puppy he wants, he is still active, even retired. It doesn't matter. I can ask, he can do what he wants.rcrsn51 wrote:Add them to what? BK has retired.
I remove the degree symbol because there were problems getting it to display correctly in non-English character sets.linuxcbon wrote:What did you modify ?
Yes. IIRC, some Puppy builders are including the sensors package.Ok so there can be 2 "sensors" , one in /usr/bin and one in /usr/local/bin ?
The procedure is described in the sensors documentation. I have never tried it.How ?
IIRC, the script/source (yes I had some affect in C/C++ sources too, could have been me though) must be encoded UTF-8 for the degree symbol, however, this may fall over if the users opts for non UTF-8 locale.rcrsn51 wrote:I remove the degree symbol because there were problems getting it to display correctly in non-English character sets.linuxcbon wrote:What did you modify ?
Yes. IIRC, some Puppy builders are including the sensors package.Ok so there can be 2 "sensors" , one in /usr/bin and one in /usr/local/bin ?
The procedure is described in the sensors documentation. I have never tried it.How ?
Puppy Linux Blog - contact me for access
To display correct voltage values, the software needs to be corrected with a "correction" file : /etc/sensors.conf
Those "correction factors" depend on the mother board model. People who love maths can calculate them.
Example :
Those "correction factors" depend on the mother board model. People who love maths can calculate them.
Example :
Code: Select all
chip "it8718-*"
compute in3 @ * (6.8/10+1), @ / (6.8/10+1)
-
- Posts: 790
- Joined: Wed 16 Apr 2008, 11:28
Hi...Mercedes350se wrote:I have a missing
libgio-2.0.so.0
Where to get it? I am using 4.1.2.
Does the file below solve this issue?
Regards...
- Attachments
-
- libgio.pet
- (145.7 KiB) Downloaded 402 times
Our Lord and Savior [url=http://peacewithgod.jesus.net/]Jesus Christ[/url] loves and cares about you most of all!
PLEASE READ! You don't have to end up [url=http://www.spiritlessons.com/Documents/BillWiese_23MinutesInHell_Text.htm]here![/url]
PLEASE READ! You don't have to end up [url=http://www.spiritlessons.com/Documents/BillWiese_23MinutesInHell_Text.htm]here![/url]
-
- Posts: 790
- Joined: Wed 16 Apr 2008, 11:28
Not knowing from where those get their info, compare:
Code: Select all
cat /proc/acpi/thermal_zone/THM/temperature
-
- Posts: 790
- Joined: Wed 16 Apr 2008, 11:28
Code: Select all
# cat /proc/acpi/thermal_zone/THM/temperature
cat: /proc/acpi/thermal_zone/THM/temperature: No such file or directory
-
- Posts: 790
- Joined: Wed 16 Apr 2008, 11:28