I have replaced my original version with shinobar's improved version, which provides better substitutions for some missing fonts.playdayz wrote:Can some people please install rcrsn51's pet on p. 25 just to test that it doesn't have any side effects? Thanks.
Lucid Puppy 5.1.1 Release - This is the official release
Just installed the font-patch PET and PDF is working fine.
Lucid 5.1 with 003 update Frugal ext3 (... and a partridge in a pear tree ...)
THANKS!
Lucid 5.1 with 003 update Frugal ext3 (... and a partridge in a pear tree ...)
THANKS!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
Dug another old box off the shelf to test a full install of Luci-222.
-Computer
Processor : AMD Athlon(tm) Processor
Memory : 255MB (71MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 30 Aug 2010 08:21:05 PM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
First boot did not identify the graphics...............
VIDEO REPORT: Lucid Puppy, version 222
Chip description:
oem: NVidia
product: Riva TNT Chip Rev B1
Driver used by Xorg:
Video mode used by Xorg:
Resolution: Depth:
...the above also recorded in /tmp/report-video
#
This is just a test install but I believe this card needs the 71.86.xx Nvidia driver.
Full install is on sda2.......no indication of such.
Otherwise,everything appears to be working..........
EDIT:
For accuracies sake, I tried the 96.43.16 and 173.14.25 drivers......X wouldn't start with either.
Working good (no acceleration) with the nv driver though.
-Computer
Processor : AMD Athlon(tm) Processor
Memory : 255MB (71MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 30 Aug 2010 08:21:05 PM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
First boot did not identify the graphics...............
VIDEO REPORT: Lucid Puppy, version 222
Chip description:
oem: NVidia
product: Riva TNT Chip Rev B1
Driver used by Xorg:
Video mode used by Xorg:
Resolution: Depth:
...the above also recorded in /tmp/report-video
#
This is just a test install but I believe this card needs the 71.86.xx Nvidia driver.
Full install is on sda2.......no indication of such.
Otherwise,everything appears to be working..........
EDIT:
For accuracies sake, I tried the 96.43.16 and 173.14.25 drivers......X wouldn't start with either.
Working good (no acceleration) with the nv driver though.
- Attachments
-
- full install luci-222.png
- (26.84 KiB) Downloaded 1121 times
Last edited by James C on Tue 31 Aug 2010, 04:01, edited 1 time in total.
SeaMonkey w/ 2 tabs open......................
- Attachments
-
- luci-222.png
- (3.74 KiB) Downloaded 1089 times
Lucid Puppy 5.1.1 Beta Testing and Development
Installed 222 to a usb flash drive using bootflash in 222.
On first boot with flash drive wired network is connected.
Installed nvidia driver in quickpet.
# glxgears
42269 frames in 5.0 seconds = 8453.800 FPS
50110 frames in 5.0 seconds = 10022.000 FPS
50114 frames in 5.0 seconds = 10022.800 FPS
50116 frames in 5.0 seconds = 10023.200 FPS
50116 frames in 5.0 seconds = 10023.200 FPS
50119 frames in 5.0 seconds = 10023.800 FPS
#
Display
Resolution
1920x1080 pixels
Vendor
The X.Org Foundation
Version
1.7.6
Monitors
Monitor 0
1920x1080 pixels
OpenGL
Vendor
NVIDIA Corporation
Renderer
GeForce 8600 GT/PCI/SSE2
Version
3.3.0 NVIDIA 256.35
Direct Rendering
Yes
Computer
Processor
4x Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Memory
3375MB (163MB used)
Operating System
Puppy Linux 0.22
User Name
root (root)
Date/Time
Mon 30 Aug 2010 10:00:07 PM GMT-8
Installed Firefox-4.0 beta 3 in quickpet news
Installed Google Earth in quickpet.
Ran setup wizards and rebooted to create save file.
It works as expected.
On first boot with flash drive wired network is connected.
Installed nvidia driver in quickpet.
# glxgears
42269 frames in 5.0 seconds = 8453.800 FPS
50110 frames in 5.0 seconds = 10022.000 FPS
50114 frames in 5.0 seconds = 10022.800 FPS
50116 frames in 5.0 seconds = 10023.200 FPS
50116 frames in 5.0 seconds = 10023.200 FPS
50119 frames in 5.0 seconds = 10023.800 FPS
#
Display
Resolution
1920x1080 pixels
Vendor
The X.Org Foundation
Version
1.7.6
Monitors
Monitor 0
1920x1080 pixels
OpenGL
Vendor
NVIDIA Corporation
Renderer
GeForce 8600 GT/PCI/SSE2
Version
3.3.0 NVIDIA 256.35
Direct Rendering
Yes
Computer
Processor
4x Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz
Memory
3375MB (163MB used)
Operating System
Puppy Linux 0.22
User Name
root (root)
Date/Time
Mon 30 Aug 2010 10:00:07 PM GMT-8
Installed Firefox-4.0 beta 3 in quickpet news
Installed Google Earth in quickpet.
Ran setup wizards and rebooted to create save file.
It works as expected.
I find the Lucid/luci numbering extremely confusing.
Is the double-naming and numbering for the same product really necessary?
Anyhow, is luci-222 the same as Lucid 5.1 with 003 installed, or ???
Is the double-naming and numbering for the same product really necessary?
Anyhow, is luci-222 the same as Lucid 5.1 with 003 installed, or ???
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
I find the Lucid/luci numbering extremely confusing.
Is the double-naming and numbering for the same product really necessary?
Anyhow, is luci-222 the same as Lucid 5.1 with 003 installed, or ???
Is the double-naming and numbering for the same product really necessary?
Anyhow, is luci-222 the same as Lucid 5.1 with 003 installed, or ???
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
In answer to your last question, no.edoc wrote:I find the Lucid/luci numbering extremely confusing.
Is the double-naming and numbering for the same product really necessary?
Anyhow, is luci-222 the same as Lucid 5.1 with 003 installed, or ???
The" Luci" releases are, as the thread title states, testing releases.There needs to be a simple way to differentiate between testing versions and stable release versions so different names.
AFAIK, the next stable release (non testing) will be 5.1.1, when testing is completed.
playdayz or 01micko can answer better, but that's my understanding of it.
I checked a full install of 218; it had an indicator on the drive.James C wrote:Dug another old box off the shelf to test a full install of Luci-222.
Full install is on sda2.......no indication of such.
Otherwise,everything appears to be working..........
Something happened after that test version.
Inspiron 700m, Pent.M 1.6Ghz, 1Gb ram.
Msi Wind U100, N270 1.6>2.0Ghz, 1.5Gb ram.
Eeepc 8g 701, 900Mhz, 1Gb ram.
Full installs
222 testing box1,2
me again
box1 (intel internals all the way)
frugal to /dev/sda3/puppy222
start: puppy pfix=ram
-started with instructions to install xorg-high
-started as before with screen at 1600x1200@85hz
-changed down to 1280x1024@85 OK
-changed down to 1024x768@85 > failed as expected BUT with a <ctrl><alt><bs> it dropped out of X to a prompt with instructions to use xorgwizard.
-started xorgwizard, chose choose button >but no i915 in pick list, therefore cancelled and started probe which seemed to work, selected test and changed down freq and size to as before ok
-installed frugal ok
-menu, shutdown, reboot to setup a save file > blue screen changed matrix up to 1800x1440@80hz therefore displayed data is very small
-working through the savefile creation works ok and it rebooted
- started via menu ok
- xorg-high installed ok
- rebooted ok and xorg-high ok
-started firewall ok
-qpets work ok
-pets from a mem stick installed ok
-started ff, had to resize to deal with the vertical "straiffing" but ok otherwise.
-doing this report from there, seems ok >except for the browser font has the narrow font characters though still
-checked midori, >font is ok but getting "giddy" when scrolling page
will update later when box2 has been loaded (love the new "month" as plenty of bandwidth (for now)).
regards
scsijon
ps my drive indicator works ok, orange bubble root, green bubble mounted.
pps just rebooted into my 5.1 working system and found it had reset to max matrix again, hm that didn't happen last time.
Box2
runs like a dream except for the following 2 problems
1- it has two cd drives and even though it is booted from the first it insists that I put the cdrom in the second to do an install! ?why?
2- it's modem worked under 431 but is not detected now. There seems some info and the fix via pet on this problem in barrys latest quirky. Can you see if one of the two is compatable with 511 please?
boxes 3 (dell) &4 (ipex) later today.
regards
scsijon
edit: found the modem fix link http://www.murga-linux.com/puppy/viewto ... 94&t=55794 rgds scsijon
box1 (intel internals all the way)
frugal to /dev/sda3/puppy222
start: puppy pfix=ram
-started with instructions to install xorg-high
-started as before with screen at 1600x1200@85hz
-changed down to 1280x1024@85 OK
-changed down to 1024x768@85 > failed as expected BUT with a <ctrl><alt><bs> it dropped out of X to a prompt with instructions to use xorgwizard.
-started xorgwizard, chose choose button >but no i915 in pick list, therefore cancelled and started probe which seemed to work, selected test and changed down freq and size to as before ok
-installed frugal ok
-menu, shutdown, reboot to setup a save file > blue screen changed matrix up to 1800x1440@80hz therefore displayed data is very small
-working through the savefile creation works ok and it rebooted
- started via menu ok
- xorg-high installed ok
- rebooted ok and xorg-high ok
-started firewall ok
-qpets work ok
-pets from a mem stick installed ok
-started ff, had to resize to deal with the vertical "straiffing" but ok otherwise.
-doing this report from there, seems ok >except for the browser font has the narrow font characters though still
-checked midori, >font is ok but getting "giddy" when scrolling page
will update later when box2 has been loaded (love the new "month" as plenty of bandwidth (for now)).
regards
scsijon
ps my drive indicator works ok, orange bubble root, green bubble mounted.
pps just rebooted into my 5.1 working system and found it had reset to max matrix again, hm that didn't happen last time.
Box2
runs like a dream except for the following 2 problems
1- it has two cd drives and even though it is booted from the first it insists that I put the cdrom in the second to do an install! ?why?
2- it's modem worked under 431 but is not detected now. There seems some info and the fix via pet on this problem in barrys latest quirky. Can you see if one of the two is compatable with 511 please?
boxes 3 (dell) &4 (ipex) later today.
regards
scsijon
edit: found the modem fix link http://www.murga-linux.com/puppy/viewto ... 94&t=55794 rgds scsijon
Last edited by scsijon on Wed 01 Sep 2010, 22:39, edited 5 times in total.
luci-222
Icewm bug with tray icons...
I gather this snuk in in latest woof, the ice package needs slight modification
First, open /usr/share/icewm and delete the blinky and freememapplet executables.
Second, open /root/Startup and delete z-fix-icewm-tray or whatever it is.. (um I already deleted it )
Third, replace /usr/local/sbin/jwmx2 script with the one attached, expand.
That should do it.
Cheers
Icewm bug with tray icons...
I gather this snuk in in latest woof, the ice package needs slight modification
First, open /usr/share/icewm and delete the blinky and freememapplet executables.
Second, open /root/Startup and delete z-fix-icewm-tray or whatever it is.. (um I already deleted it )
Third, replace /usr/local/sbin/jwmx2 script with the one attached, expand.
That should do it.
Cheers
- Attachments
-
- jwmx2-0.2.tar.gz
- (814 Bytes) Downloaded 293 times
Puppy Linux Blog - contact me for access
Luci-222 live pfix=ram in my main Linux box.
VIDEO REPORT: Lucid Puppy, version 222
Chip description:
oem: S3 Graphics ProSavage DDR Family BIOS
product: VBE 3.0 Rev 0.0
Driver used by Xorg:
Video mode used by Xorg:
Resolution: Depth:
...the above also recorded in /tmp/report-video
#
# glxgears
1870 frames in 5.0 seconds
1525 frames in 5.0 seconds
1872 frames in 5.0 seconds
2120 frames in 5.0 seconds
2116 frames in 5.0 seconds
2129 frames in 5.0 seconds
2094 frames in 5.0 seconds
2122 frames in 5.0 seconds
1851 frames in 5.0 seconds
7718 frames in 5.0 seconds
7181 frames in 5.0 seconds
6941 frames in 5.0 seconds
7654 frames in 5.0 seconds
5584 frames in 5.0 seconds
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1002MB (130MB used)
Operating System : Puppy Linux 0.22
User Name : root (root)
Date/Time : Tue 31 Aug 2010 01:09:47 AM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI ProSavageDDR 20061110 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-OpenGL
Vendor : S3 Graphics Inc.
Renderer : Mesa DRI ProSavageDDR 20061110 x86/MMX+/3DNow!+/SSE
Version : 1.2 Mesa 7.7.1
Direct Rendering : Yes
Installed Xorg_High and Firefox..........everything seems good.
VIDEO REPORT: Lucid Puppy, version 222
Chip description:
oem: S3 Graphics ProSavage DDR Family BIOS
product: VBE 3.0 Rev 0.0
Driver used by Xorg:
Video mode used by Xorg:
Resolution: Depth:
...the above also recorded in /tmp/report-video
#
# glxgears
1870 frames in 5.0 seconds
1525 frames in 5.0 seconds
1872 frames in 5.0 seconds
2120 frames in 5.0 seconds
2116 frames in 5.0 seconds
2129 frames in 5.0 seconds
2094 frames in 5.0 seconds
2122 frames in 5.0 seconds
1851 frames in 5.0 seconds
7718 frames in 5.0 seconds
7181 frames in 5.0 seconds
6941 frames in 5.0 seconds
7654 frames in 5.0 seconds
5584 frames in 5.0 seconds
-Computer-
Processor : AMD Athlon(tm) XP 2400+
Memory : 1002MB (130MB used)
Operating System : Puppy Linux 0.22
User Name : root (root)
Date/Time : Tue 31 Aug 2010 01:09:47 AM GMT-8
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Mesa DRI ProSavageDDR 20061110 x86/MMX+/3DNow!+/SSE
X11 Vendor : The X.Org Foundation
-OpenGL
Vendor : S3 Graphics Inc.
Renderer : Mesa DRI ProSavageDDR 20061110 x86/MMX+/3DNow!+/SSE
Version : 1.2 Mesa 7.7.1
Direct Rendering : Yes
Installed Xorg_High and Firefox..........everything seems good.
Though the [Reopen..Tab..] icon isn`t correct IT WORKS to open previously closed tab at midoriOh, I found it. It worked! Does it not work under some circumstances?
drive icons on frugal install : mount (x) circle is o.k. ( and was o.k. the last luci-2xy too ( frugal ) )
- Attachments
-
- DriveIcon-q40.jpg
- (7.33 KiB) Downloaded 1297 times
Something went wrong.....................01micko wrote:luci-222
Icewm bug with tray icons...
I gather this snuk in in latest woof, the ice package needs slight modification
First, open /usr/share/icewm and delete the blinky and freememapplet executables.
Second, open /root/Startup and delete z-fix-icewm-tray or whatever it is.. (um I already deleted it )
Third, replace /usr/local/sbin/jwmx2 script with the one attached, expand.
That should do it.
Cheers
- Attachments
-
- taskbar.png
- (3.74 KiB) Downloaded 1305 times
Moved "jwmx2" to /usr/local/bin/.............working now.James C wrote:Let's see....
In /root/startup/ there is.."wmfix" and "z-start-icetrayapps".....I chose the second.
In /usr/local/sbin/ ,there is no jwmx2 to replace,only a link to dhcpd in /sbin/. Expanded and put file there.
Where did I go wrong?
EDIT:
"jwmx2 is in /usr/local/bin/.........
222.... Same Old Problem
Thought I would try the default configuration this time. Fresh Frugal, save file yet to be created..... booted to desktop as expected. Opted to use given defaults as they looked OK. Set Wlan0 no problem. Set Locale to UK, no problem. Tried to set Flsynclient..... Synaptics not found!
Re-booted creating save file. Tried Flsynclient again... Synaptics not found.
Deleted save file, re-booted using classic configuration system. All no problem INCLUDING successful Synaptics install.
Notice others have had this problem in the past.
Hmmmm...............
Thought I would try the default configuration this time. Fresh Frugal, save file yet to be created..... booted to desktop as expected. Opted to use given defaults as they looked OK. Set Wlan0 no problem. Set Locale to UK, no problem. Tried to set Flsynclient..... Synaptics not found!
Re-booted creating save file. Tried Flsynclient again... Synaptics not found.
Deleted save file, re-booted using classic configuration system. All no problem INCLUDING successful Synaptics install.
Notice others have had this problem in the past.
Hmmmm...............
Spup Frugal HD and USB
Root forever!
Root forever!