How to Install Your Printer/Scanner in Puppy

Problems and successes with specific brands/models of printers
Post Reply
Message
Author
User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#121 Post by rcrsn51 »

Henry wrote:What was confusing me was the need to reboot the printer after rebooting the computer or when printing after scanning or vice versa. My previous HP 4480 did not have this characteristic.
My HPLIP packages have always had this problem - you need to restart the device after a scan session before it will print again. It has to do with USB detection and may be specific to the HP model.

I wonder if lluamco's hplip-lite package avoids this situation.

Re CUPS 1.4.4 - there may be good reasons for upgrading if you are installing Open/Libre Office. Does it also require the SDL-1.2.14-w5c package?

ndujoe1
Posts: 851
Joined: Mon 05 Dec 2005, 01:06

scanner behaviour

#122 Post by ndujoe1 »

I have an HP PSC 1210 and I always have had to restart the printer after scanning, just a quirk I guess. No great hindrance.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

Re: scanner behaviour

#123 Post by rcrsn51 »

ndujoe1 wrote:I have an HP PSC 1210 and I always have had to restart the printer after scanning, just a quirk I guess. No great hindrance.
Which driver do you use - lluamco's hplip-lite or my hplip_scan?

ndujoe1
Posts: 851
Joined: Mon 05 Dec 2005, 01:06

HP pac 1210`

#124 Post by ndujoe1 »

I use yours. It has always worked fine for me np.

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#125 Post by rcrsn51 »

Henry wrote:What was confusing me was the need to reboot the printer after rebooting the computer or when printing after scanning or vice versa. My previous HP 4480 did not have this characteristic.
This little glitch with HP devices also depends on the CUPS version. It may be that your CUPS 1.4.4 install didn't have it, while CUPS 1.3.11 definitely does.

Henry
Posts: 863
Joined: Sun 30 Jul 2006, 02:28
Location: Oregon USA
Contact:

#126 Post by Henry »

Actually, it may have had it, maybe not in exactly the same way. I remember times when I had to restart the 4480 for the scanner to be found.

Also, I do seem to require SDL-1.2.14-w5c to print.

I've been using this same highly tailored sytem through so many upgrades for so many years that I can'r remember all the changes. I do recall that when I went to Cups 1.4 it was because LibreOffce of that time required it for printing.

It's quite good enough now to get back to the real work that I use this computer for. All tidied and backed up.

AirCon
Posts: 12
Joined: Mon 26 Mar 2007, 06:42

Canon ip4950 driver

#127 Post by AirCon »

Can anyone help me out with a driver for my new printer?
Ive just bought a Canon ip4950 and the driver isnt included in CUPS.
I'd really appreciate any help you can give me.
Just like Aircon my system worked fine till I opened Windows

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

Re: Canon ip4950 driver

#128 Post by rcrsn51 »

AirCon wrote:Ive just bought a Canon ip4950 and the driver isnt included in CUPS.
I have posted the iP4900 Series printer driver in the Canon printer thread here.

This is a new driver, so please provide feedback. Did you try any of the other iP drivers?

[Edit] Attachment deleted - no feedback provided. If anyone else wants this driver, they can post another request.
Last edited by rcrsn51 on Mon 01 Oct 2012, 03:50, edited 1 time in total.

Frank Cox
Posts: 378
Joined: Sun 01 Nov 2009, 06:05

Re: Canon ip4950 driver

#129 Post by Frank Cox »

rcrsn51 wrote:
AirCon wrote:Ive just bought a Canon ip4950 and the driver isnt included in CUPS.
I have posted the iP4900 Series printer driver in the Canon printer thread here.

This is a new driver, so please provide feedback. Did you try any of the other iP drivers?
It is good to know there is some support for cannon. I need to go through my old ones and see if they are now supported. Is this the pup version of this driver?

TurboPrint Linux


TurboPrint - printer drivers for Linux - Canon PIXMA iP4950

Thanks

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

Re: Canon ip4950 driver

#130 Post by rcrsn51 »

Frank Cox wrote: Is this the pup version of this driver? TurboPrint - printer drivers for Linux - Canon PIXMA iP4950
No. The source of these drivers is explained here.

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#131 Post by sheldonisaac »

The Brother HL-1450 printer has been connected with a 25-pin cable for years to my ASUS P5A-based computer, and prints fine from Windows 98SE.
I had used the Brother installation disk for that.

I don't think I've ever printed from Linux.

The other day I was writing a small text document with Geany on this computer, a Dell Latitude D610 with Lucid Puppy 5.28

I moved the printer's cable to this computer's jack, but then realized I had no idea how to print.

I see that near the end of this long thread, rcrsn51 had made an (hopefully easy-to-use) pet file for someone.

If convenient, I'd like something that would be easy for me to install.

I would try to follow whatever instructions.

Many thanks,

Sheldon

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#132 Post by rcrsn51 »

First of all, the Brother section is here.

I just checked and there is already a Gutenprint driver for the HL-1450 in Puppy. Have you actually tried to install this printer yet in CUPS?

Because it's a parallel port printer, it may not be auto-detected. So you will have to go through Add Printer step-by-step.

sheldonisaac
Posts: 902
Joined: Mon 22 Jun 2009, 01:36
Location: Philadelphia, PA

#133 Post by sheldonisaac »

rcrsn51 wrote:First of all, the Brother section is here.

I just checked and there is already a Gutenprint driver for the HL-1450 in Puppy. Have you actually tried to install this printer yet in CUPS?

Because it's a parallel port printer, it may not be auto-detected. So you will have to go through Add Printer step-by-step.
Thank you! It works.


Sheldon

AirCon
Posts: 12
Joined: Mon 26 Mar 2007, 06:42

Re: Canon ip4950 driver

#134 Post by AirCon »

rcrsn51 wrote:
AirCon wrote:Ive just bought a Canon ip4950 and the driver isnt included in CUPS.
I have posted the iP4900 Series printer driver in the Canon printer thread here.

This is a new driver, so please provide feedback. Did you try any of the other iP drivers?

[Edit] Attachment deleted - no feedback provided. If anyone else wants this driver, they can post another request.
Hi, Sorry for the delay. Only just got to check back on this thread.
Can you repost the attachment for the ip4900 series please?
I'll give it a whirl and get back to you with some feedback :-)
Just like Aircon my system worked fine till I opened Windows

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#135 Post by rcrsn51 »

Done.

AirCon
Posts: 12
Joined: Mon 26 Mar 2007, 06:42

#136 Post by AirCon »

Downloaded and installed!
A huge thank you bud 8)
The install went smooth as silk via CUPS printer wizard and the print is clear and sharp.

Is it possible to have the option of increasing the resolution beyond 600dpi?
Its looking really good for text documents and most other jobs but it'd be nice to up the quality for photos etc.
Once again many thanks.
Just like Aircon my system worked fine till I opened Windows

AirCon
Posts: 12
Joined: Mon 26 Mar 2007, 06:42

#137 Post by AirCon »

Ive found the .ppd file but I have no idea how to change the options to include higher res :-(
Amedment:
is this the code I need to add to the .ppd file?
*OpenUI *Resolution/Output Resolution: PickOne
*DefaultResolution: 600
*Resolution 600/600 dpi: "<</HWResolution[600 600]>>setpagedevice"
*Resolution 1200/1200 dpi: "<</HWResolution[1200 1200]>>setpagedevice"
*Resolution 2400/2400 dpi: "<</HWResolution[2400 2400]>>setpagedevice"
*CloseUI: *Resolution
Just like Aircon my system worked fine till I opened Windows

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#138 Post by rcrsn51 »

Is this code from here and the German link? Make a backup copy of the PPD file and try it.

AirCon
Posts: 12
Joined: Mon 26 Mar 2007, 06:42

#139 Post by AirCon »

It works!
Happy days 8)
Just like Aircon my system worked fine till I opened Windows

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#140 Post by rcrsn51 »

Are you claiming that you can tell the difference between 600 DPI and 1200 DPI? :wink:

Post Reply