How to Install Your Printer/Scanner in Puppy
- ThoriumBlvd
- Posts: 159
- Joined: Fri 04 Oct 2013, 09:04
- Location: N.E. USA
Slacko-5.5XL OK
EDITED: Deleted the old printer/driver set up first.
When I select "ADD PRINTER" the following list appears
HP LaserJet Professional P 1102w (HP LaserJet Professional P 1102w) [Use this one]
HP LaserJet Professional P 1102w USB 00000000xxxxxxxxxxxx HPLIP (HP LaserJet Professional P 1102w)
SCSI Printer
pdf writer (PDF)
Following instructions, I did not pick any printer or driver with "HPLIP" in the name. I scrolled far down the driver list and found the foo2 version. I selected that one and it does print the test page. (Default is Medium 3 darkness)
EDIT#2: What messed me up here was the first printer driver on the list exactly matched the selected Printer name (no HPLIP). I did not think I was using HPLIP. As referenced, I had to scroll way down the list to find the correct version.
I tried printing from LibreOffice4 and report that it works well even when there is some color in the orig. document.
PDF is next...works fine.
Webpage printing through FF23 works fine
http://www.weather.gov/data/obhistory/KMMK.html
3 pages, good formatting good B/W copy
Thanks for this.
When I select "ADD PRINTER" the following list appears
HP LaserJet Professional P 1102w (HP LaserJet Professional P 1102w) [Use this one]
HP LaserJet Professional P 1102w USB 00000000xxxxxxxxxxxx HPLIP (HP LaserJet Professional P 1102w)
SCSI Printer
pdf writer (PDF)
Following instructions, I did not pick any printer or driver with "HPLIP" in the name. I scrolled far down the driver list and found the foo2 version. I selected that one and it does print the test page. (Default is Medium 3 darkness)
EDIT#2: What messed me up here was the first printer driver on the list exactly matched the selected Printer name (no HPLIP). I did not think I was using HPLIP. As referenced, I had to scroll way down the list to find the correct version.
I tried printing from LibreOffice4 and report that it works well even when there is some color in the orig. document.
PDF is next...works fine.
Webpage printing through FF23 works fine
http://www.weather.gov/data/obhistory/KMMK.html
3 pages, good formatting good B/W copy
Thanks for this.
[img]http://www.am3radio.us/image3.jpg[/img] . [img]http://www.am3radio.us/image4.jpg[/img]
Solution for Slacko 5.7. and HP PSC 1310 with error "usr/lib/cups/filter/foomatic-rip-hplip failed": http://www.murga-linux.com/puppy/viewto ... 431#794431
Cannot scan
Cannot scan
HP Deskjet 3510 all-in-one printer
Toshiba laptop A35-S4527
Installed the following:
printer-scanner-001.sfs
printer-scanner-drivers.sfs
hplip_print-3.13.7.pet
hplip_scan-3.13.7.pet
cups-1.3.11-i486.pet
This is my main OS... Tman's warytiny... somehow just corrupted my year old savefile... no backup... recovering and, once again, I can print, but not scan...
See attachments...
Thank you for your help...
HP Deskjet 3510 all-in-one printer
Toshiba laptop A35-S4527
Installed the following:
printer-scanner-001.sfs
printer-scanner-drivers.sfs
hplip_print-3.13.7.pet
hplip_scan-3.13.7.pet
cups-1.3.11-i486.pet
This is my main OS... Tman's warytiny... somehow just corrupted my year old savefile... no backup... recovering and, once again, I can print, but not scan...
See attachments...
Thank you for your help...
- Attachments
-
- scanning1.png
- (47.47 KiB) Downloaded 317 times
-
- scanning2.png
- (58.07 KiB) Downloaded 332 times
Re: Cannot scan
I have no idea what those packages are or what they have to do with TinyWary. This looks like another example of a puplet builder who stripped out a bunch of stuff without thinking about the consequences.yr1945 wrote:Installed the following:
printer-scanner-001.sfs
printer-scanner-drivers.sfs
However, you appear to be connecting to a networked unit. Is there any chance that its IP address is no longer 192.168.1.104?
I checked the IP address... it is correct.
Again, I can print (wireless)... just cannot scan. Before my savefile crashed... I could print and scan. However, it was set up over a year ago and I don't remember the details.
Yes, warytiny is stripped...
I will keep working on it until I can scan...
Anyway, thank you for taking a look at it...
Again, I can print (wireless)... just cannot scan. Before my savefile crashed... I could print and scan. However, it was set up over a year ago and I don't remember the details.
Yes, warytiny is stripped...
I will keep working on it until I can scan...
Anyway, thank you for taking a look at it...
Connect the printer directly by USB and run
Code: Select all
sane-find-scanner
scanimage -L
per your request to connect the
printer directly by USB and run Code:
sane-find-scanner
scanimage -L
see attachment for results...
printer directly by USB and run Code:
sane-find-scanner
scanimage -L
see attachment for results...
- Attachments
-
- terminal results.png
- (51.46 KiB) Downloaded 339 times
Get libusb_5xx-1.0.pet.# No USB scanners found. If you expected something different, make sure that
# you have loaded a kernel driver for your USB host controller and have setup
# the USB system correctly. See man sane-usb for details.
Installed libusb_5xx-1.0.pet...
Re-ran Code:
sane-find-scanner
scanimage -L
see attachment for results...
Re-ran Code:
sane-find-scanner
scanimage -L
see attachment for results...
- Attachments
-
- terminal results2.png
- (51.33 KiB) Downloaded 403 times
rcrsn51...
FYI, I loaded Saluki023 and Precise571. I used my same process and was successful at getting the scanner to work.
However, using my same process, I was not able to get the scanner working with Fluppy013. Anyway, I could not get the printer-scanner-drivers.sfs to load. I believe Fluppy013 is based on Wary, too?
Also, on warytiny,I checked all pets that I loaded for their respective dependencies... hplip_scan-3.13.7.pet required dbus-glib... I installed it, but the scanner still would not work...
FYI, I loaded Saluki023 and Precise571. I used my same process and was successful at getting the scanner to work.
However, using my same process, I was not able to get the scanner working with Fluppy013. Anyway, I could not get the printer-scanner-drivers.sfs to load. I believe Fluppy013 is based on Wary, too?
Also, on warytiny,I checked all pets that I loaded for their respective dependencies... hplip_scan-3.13.7.pet required dbus-glib... I installed it, but the scanner still would not work...
rcrsn51...
You won't believe this, but this morning when I booted up my laptop, I tried to scan a document and the scanner worked just fine.
See attached screenshot. I'm back in business. The next thing I will do is backup my newly created warytiny savefile. I've used warytiny for a long, long time. I want to stay with it. It is small, fast and usually very stable.
You are right about the printer-scanner.sfs. I believe it loads an older version of peasyscan and sane scan. I will delete it from my install process. I could be wrong, but the printer-scanner-drivers.sfs may help me find my specific HP 3510 Deskjet printer. I will double check this before I delete this particular sfs file.
Thank you!!! I really appreciate your knowledge and your willingness to support us.
You won't believe this, but this morning when I booted up my laptop, I tried to scan a document and the scanner worked just fine.
See attached screenshot. I'm back in business. The next thing I will do is backup my newly created warytiny savefile. I've used warytiny for a long, long time. I want to stay with it. It is small, fast and usually very stable.
You are right about the printer-scanner.sfs. I believe it loads an older version of peasyscan and sane scan. I will delete it from my install process. I could be wrong, but the printer-scanner-drivers.sfs may help me find my specific HP 3510 Deskjet printer. I will double check this before I delete this particular sfs file.
Thank you!!! I really appreciate your knowledge and your willingness to support us.
- Attachments
-
- screenshot.png
- (64.79 KiB) Downloaded 316 times
-
- Posts: 11
- Joined: Fri 28 Dec 2007, 19:47
- Location: Hamilton, New Zealand
Canon MG5300 Series printer & canon_mg5300-3.60.pet
I am using Lupu 5.2.8.6 on a Dell Dimension 3000 connected via USB to a Canon PIXMA MG5350. After I installed "canon_mg5300-3.60.pet", CUPS - (Ver.: 1.4.3) - installs it ok using: "Canon-mg5300 Series Ver. 3.60" driver. It will not print from a 'print-ready-version' of an email; also when I try to do a Maintenance "Print Test Page" it STOPS & the job dialogue says: "Empty print file!" Also when I try to do a "Print Self-Test Page", I get:
Print Self-Test Page Canon_MG5300_series Error
Unable to send command to printer driver!
Unsupported format 'application/vnd.cups-command'!
I have instaled; uninstalled; & re-installed several times but no joy. I also set printer as default server printer but that did not seem to do anything...?
I have unsuccessfully been trying to add the following as an attachment: "http://localhost:631/admin/log/error_log?" but I keep getting:"The Extension is not allowed" ? & when I clicked on "Allowed Extensions & Sizes", I get:
Allowed Extension Groups and their Sizes
Archives -> Maximum Upload Size: 0 Bytes (???!!!)
ace, bz2, gtar, gz, pet, pup, rar, tar, zip
Images -> Maximum Upload Size: 0 Bytes (???!!!)
gif, jpeg, jpg, png, tga, tif, xpm
It is nearly 03:30 am here in New Zealand & I am too tired to work it out...
Thank you in anticipation...
Print Self-Test Page Canon_MG5300_series Error
Unable to send command to printer driver!
Unsupported format 'application/vnd.cups-command'!
I have instaled; uninstalled; & re-installed several times but no joy. I also set printer as default server printer but that did not seem to do anything...?
I have unsuccessfully been trying to add the following as an attachment: "http://localhost:631/admin/log/error_log?" but I keep getting:"The Extension is not allowed" ? & when I clicked on "Allowed Extensions & Sizes", I get:
Allowed Extension Groups and their Sizes
Archives -> Maximum Upload Size: 0 Bytes (???!!!)
ace, bz2, gtar, gz, pet, pup, rar, tar, zip
Images -> Maximum Upload Size: 0 Bytes (???!!!)
gif, jpeg, jpg, png, tga, tif, xpm
It is nearly 03:30 am here in New Zealand & I am too tired to work it out...
Thank you in anticipation...
[b]"For we have not been given a spirit of fear, but a spirit of Power, of Love, and of a sound mind." - 2Tim. 1v7[/b]
I have tried everything I read here ... or at least I think I did.
I loaded debbi-1.1.pet
I went to the Brother link
http://support.brother.com/g/s/id/linux ... #HL-2275DW
& downloaded
I ran these two lines in Terminal
Even after deleting & finding again CUPS shows:
(I also loaded peasyscan but Carolina 1.3 doesn't offer CUPS 1.4 so the current version of peasyscan will not work.)
WDYT, please?
I loaded debbi-1.1.pet
I went to the Brother link
http://support.brother.com/g/s/id/linux ... #HL-2275DW
& downloaded
I moved them to /rootLPR driver deb 2.1.0-1 35 KB 2011.Mar.18
cupswrapper driver deb 2.0.4-2 13 KB 2011.Mar.18
I ran these two lines in Terminal
Code: Select all
debbi hl2280dwlpr-2.1.0-1.i386.deb
debbi cupswrapperHL2280DW-2.0.4-2.i386.deb
I found the old Reset Printer code you gave me for a HP Laserjet P1006 but could not figure out how to adapt it - even if that were to be the solution.brotherhl-2275dw (Default Printer) "Unable to locate printer 'hostname'!"
Description: Brother HL-2275DW B&W
Location: office
Printer Driver: Brother HL2280DW for CUPS
Printer State: stopped, accepting jobs, published.
Device URI: socket://hostname:9100
(I also loaded peasyscan but Carolina 1.3 doesn't offer CUPS 1.4 so the current version of peasyscan will not work.)
WDYT, please?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603