How to Install Your Printer/Scanner in Puppy
HP 6200s OFFICE JET ALL IN ONE - scanner not working
sane log:
[/img]
Code: Select all
root# sane-find-scanner -verbose
This is sane-find-scanner from sane-backends 1.0.26git
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
searching for SCSI scanners:
checking /dev/scanner... failed to open (Invalid argument)
checking /dev/sg0... failed to open (Invalid argument)
checking /dev/sg1... failed to open (Invalid argument)
/dev/sg2... failed to open (Invalid argument)
checking /dev/sg3... failed to open (Invalid argument)
checking /dev/found USB scanner (vendor=0x03f0 [HP], product=0x4b11 [Officejet 6200 series]) at libusb:002:005
could not fetch string descriptor: Pipe error
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
done... failed to open (Invalid argument)
checking /dev/sg5... failed to open (Invalid argument)
checking /dev/sg6... failed to open (Invalid argument)
checking /dev/sg7... failed to open (Invalid argument)
checking /dev/sg8... failed to open (Invalid argument)
checking /dev/sg9... failed to open (Invalid argument)
checking /dev/sga... failed to open (Invalid argument)
checking /dev/sgb... failed to open (Invalid argument)
checking /dev/sgc... failed to open (Invalid argument)
checking /dev/sgd... failed to open (Invalid argument)
checking /dev/sge... failed to open (Invalid argument)
checking /dev/sgf... failed to open (Invalid argument)
checking /dev/sgg... failed to open (Invalid argument)
checking /dev/sgh... failed to open (Invalid argument)
checking /dev/sgi... failed to open (Invalid argument)
checking /dev/sgj... failed to open (Invalid argument)
checking /dev/sgk... failed to open (Invalid argument)
checking /dev/sgl... failed to open (Invalid argument)
checking /dev/sgm... failed to open (Invalid argument)
checking /dev/sgn... failed to open (Invalid argument)
checking /dev/sgo... failed to open (Invalid argument)
checking /dev/sgp... failed to open (Invalid argument)
checking /dev/sgq... failed to open (Invalid argument)
checking /dev/sgr... failed to open (Invalid argument)
checking /dev/sgs... failed to open (Invalid argument)
checking /dev/sgt... failed to open (Invalid argument)
checking /dev/sgu... failed to open (Invalid argument)
checking /dev/sgv... failed to open (Invalid argument)
checking /dev/sgw... failed to open (Invalid argument)
checking /dev/sgx... failed to open (Invalid argument)
checking /dev/sgy... failed to open (Invalid argument)
checking /dev/sgz... failed to open (Invalid argument)
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
searching for USB scanners:
checking /dev/usb/scanner... failed to open (Invalid argument)
checking /dev/usb/scanner0... failed to open (Invalid argument)
checking /dev/usb/scanner1... failed to open (Invalid argument)
checking /dev/usb/scanner2... failed to open (Invalid argument)
checking /dev/usb/scanner3... failed to open (Invalid argument)
checking /dev/usb/scanner4... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner5... failed to open (Invalid argument)
checking /dev/usb/scanner7... failed to open (Invalid argument)
checking /dev/usb/scanner8... failed to open (Invalid argument)
checking /dev/usb/scanner9... failed to open (Invalid argument)
checking /dev/usb/scanner10... failed to open (Invalid argument)
checking /dev/usb/scanner11... failed to open (Invalid argument)
checking /dev/usb/scanner12... failed to open (Invalid argument)
checking /dev/usb/scanner13... failed to open (Invalid argument)
checking /dev/usb/scanner14... failed to open (Invalid argument)
checking /dev/usb/scanner15... failed to open (Invalid argument)
checking /dev/usbscanner... failed to open (Invalid argument)
checking /dev/usbscanner0... failed to open (Invalid argument)
checking /dev/usbscanner1... failed to open (Invalid argument)
checking /dev/usbscanner2... failed to open (Invalid argument)
checking /dev/usbscanner3... failed to open (Invalid argument)
checking /dev/usbscanner4... failed to open (Invalid argument)
checking /dev/usbscanner5... failed to open (Invalid argument)
checking /dev/usbscanner6... failed to open (Invalid argument)
checking /dev/usbscanner7... failed to open (Invalid argument)
checking /dev/usbscanner8... failed to open (Invalid argument)
checking /dev/usbscanner9... failed to open (Invalid argument)
checking /dev/usbscanner10... failed to open (Invalid argument)
checking /dev/usbscanner11... failed to open (Invalid argument)
checking /dev/usbscanner12... failed to open (Invalid argument)
checking /dev/usbscanner13... failed to open (Invalid argument)
checking /dev/usbscanner14... failed to open (Invalid argument)
checking /dev/usbscanner15... failed to open (Invalid argument)
found USB scanner (vendor=0x03f0 [HP], product=0x4b11 [Officejet 6200 series]) at libusb:002:005
could not fetch string descriptor: Pipe error
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
done
- Attachments
-
- image.png
- This is the sane version used
- (34.35 KiB) Downloaded 595 times
rcrsn51 wrote: What does the "scanimage -L" command say?
It tells me that no devices were found. Yes I installed the printer and scanner pets from here:
http://www.mediafire.com/download/2uw6a ... 3.16.5.pet
printing works fine and it does use the hplite driver.
http://www.mediafire.com/download/hk4um ... 3.16.5.petto be clear, do you mean the hplip_print PET from here or the hplite package from another section?
Those pets are installed in my system
First of all, sane-find-scanner is broken in Tahrpup 605. Is that why you installed SANE v1.0.26?
But hplip_scan v3.16.5 is definitely working with my HP models.
Because you have now made a number of changes, it's impossible to know what's going on. I would recommend a fresh install of Tahpup that reverts to the original SANE.
Then install the hplip_scan PET and check with scanimage -L.
If you want a working sane-find-scanner, pull it out of a Slacko.
But hplip_scan v3.16.5 is definitely working with my HP models.
Because you have now made a number of changes, it's impossible to know what's going on. I would recommend a fresh install of Tahpup that reverts to the original SANE.
Then install the hplip_scan PET and check with scanimage -L.
If you want a working sane-find-scanner, pull it out of a Slacko.
Thanks I Will Try it and report back.rcrsn51 wrote:First of all, sane-find-scanner is broken in Tahrpup 605. Is that why you installed SANE v1.0.26?
But hplip_scan v3.16.5 is definitely working with my HP models.
Because you have now made a number of changes, it's impossible to know what's going on. I would recommend a fresh install of Tahpup that reverts to the original SANE.
Then install the hplip_scan PET and check with scanimage -L.
If you want a working sane-find-scanner, pull it out of a Slacko.
It worked. My packages broke the sane backend. At the beginning I tried sane-find-scanner and did not detect anything so then I decided to compile a newer version, everything spiraled downward from there. I did not try to get the hp drivers until I had already tried to use the newer version of sane
https://postimg.org/image/6s19kivif
https://postimg.org/image/6s19kivif
OP links broken at mediafire
as title says - the links appear to be broken from mediafire... the link i was specifically interested in is/was the tahrpup64 combo hplip printer/scanner...
if there is going to be an update anyways - is there any way to get the latest/greatest version ? ie - i think it is the 3.16-series rather than the 3.15 series now... otoh, my printer/scanner is fairly old and so it does not need the latest/greatest to work, i assume (hp officejet 4500 g-z somesuch)...
tia, h.
if there is going to be an update anyways - is there any way to get the latest/greatest version ? ie - i think it is the 3.16-series rather than the 3.15 series now... otoh, my printer/scanner is fairly old and so it does not need the latest/greatest to work, i assume (hp officejet 4500 g-z somesuch)...
tia, h.
Appear nothing. They ARE.
Hmm.. Bill's last post?
Unless someone provides a pkg via PM or link, you're SOL Mate!
Hmm.. Bill's last post?
Unless someone provides a pkg via PM or link, you're SOL Mate!
>>> Living with the immediacy of death helps you sort out your priorities. It helps you live a life less trivial <<<
hplip download site
@rcrsn51
Wanted to try your hplip_print-3.16.5.pet and hplip_san-3.16.5.pet for the new 64-bit Slacko but your site hasn't been working for a week now? I guess you know by now the new 64-bit has a print problem, hopefully your .pet's will correct things?
>>>---Indian------>
Wanted to try your hplip_print-3.16.5.pet and hplip_san-3.16.5.pet for the new 64-bit Slacko but your site hasn't been working for a week now? I guess you know by now the new 64-bit has a print problem, hopefully your .pet's will correct things?
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
I' very worried because I buyed HP LaserJet Pro MFP M127fs and I cannot print with Puppy slacko...
CUPS 1.4.8 worked fine with other printer Lexmark
Now I have :
HP LaserJet Pro MFP m127fs, hpcups 3.16.8, requires proprietary plugin
in Location Make and Model column
and when I try to print I can read in State column:
processing since
mar 27 set 2016 11:21:13 CEST
"/usr/lib/cups/filter/hpcups failed"
Please help me !!!
CUPS 1.4.8 worked fine with other printer Lexmark
Now I have :
HP LaserJet Pro MFP m127fs, hpcups 3.16.8, requires proprietary plugin
in Location Make and Model column
and when I try to print I can read in State column:
processing since
mar 27 set 2016 11:21:13 CEST
"/usr/lib/cups/filter/hpcups failed"
Please help me !!!
Now I tryed extracting PPD file to HPLIP
HP LaserJet Pro MFP m127fs hpijs, 3.16.8, requires proprietary plugin (color, 2-sided printing)
but when I try I have
processing since
mar 27 set 2016 11:32:38 CEST
"Connected to printer..."
and after half minute disappear and I have No Jobs
Same if I connect with USB. In CUPS I found printer but doesn't works
HP LaserJet Pro MFP m127fs hpijs, 3.16.8, requires proprietary plugin (color, 2-sided printing)
but when I try I have
processing since
mar 27 set 2016 11:32:38 CEST
"Connected to printer..."
and after half minute disappear and I have No Jobs
Same if I connect with USB. In CUPS I found printer but doesn't works
- mpierrat25
- Posts: 113
- Joined: Thu 23 Aug 2007, 20:56
- Location: France (25)
not able to get hplip_*-3.16
I'm not able to download hplip as mentioned in this post ( deleted ? not undertsanding ?)
please precise or give me a other linkThe latest hplip_print-3.16.5.pet can be downloaded here. Click the small green DOWNLOAD box.
Code:
847da256f12b575596529eaae4b1bad4 hplip_print-3.16.5.pet
The hplip_scan-3.16.5.pet is here. Click the small green DOWNLOAD box.
Code:
fac1185b4a6efae3000a617bcbefe33a hplip_scan-3.16.5.pet
- Sky Aisling
- Posts: 1368
- Joined: Sat 27 Jun 2009, 23:02
- Location: Port Townsend, WA. USA
How to Install Your Printer/Scanner in Puppy
Hello Rcrsn51,
Thank you for your response in advance.
Sky
Mediafire says file not there. Is there an alternative site to find this .pet?Update: I have built a 64bit version of HPLIP specifically for Tahrpup64. This is a combo print/scan package . Download it here.
Code:
e0936e8883891fe0f2acf1cd67c95ff0 hplip_print_scan_tahr64-3.15.9.pet
Thank you for your response in advance.
Sky
- perdido
- Posts: 1528
- Joined: Mon 09 Dec 2013, 16:29
- Location: ¿Altair IV , Just north of Eeyore Junction.?
rcrsn51 has been mia for a few months, hope he returns.
Pet here, same md5 checksum.
http://www.murga-linux.com/puppy/viewto ... 95f2180190
Pet here, same md5 checksum.
http://www.murga-linux.com/puppy/viewto ... 95f2180190
Last edited by perdido on Tue 20 Dec 2016, 05:02, edited 1 time in total.