Puppy Arcade 10

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
morgonzola
Posts: 161
Joined: Thu 22 Apr 2010, 03:14
Location: Los Angeles, CA

#46 Post by morgonzola »

well after some experimenting, i just decided to try out installing all the stuff on to lupu which worked for the most part (i didn't have to build it manually i could just rip some debs :D ) Are you thinking about moving this to lupu at some point?
have you seen this if you are worried about size restrictions?

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

#47 Post by sc0ttman »

morgonzola wrote:well after some experimenting, i just decided to try out installing all the stuff on to lupu which worked for the most part (i didn't have to build it manually i could just rip some debs :D ) Are you thinking about moving this to lupu at some point?
have you seen this if you are worried about size restrictions?
Out of curiosity, which PETs did you install? And what libs did you need to update?

And yes, I saw Lupu-lite - without nearly any apps installed it is still only 5bm smaller than Puppy Arcade! But... Yes, at some point I do plan to make a Puppy 5 based Puppy Arcade... Possibly version 12 - I think version 11 will have to be be the last in a TurboPup base :(

(Although to be honest, Puppy Arcade is very near completion, as far as I am concerned...I don't know what more I can do with it, expect add a few emulators, make a few new GUIs, improve a few things here and there.... )
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

SouthPaws
Posts: 66
Joined: Sat 16 Sep 2006, 15:49

Emulator

#48 Post by SouthPaws »

Is there a 3DO(panasonic) emulator...?

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

Re: Emulator

#49 Post by sc0ttman »

SouthPaws wrote:Is there a 3DO(panasonic) emulator...?
SDLMESS - http://murga-linux.com/puppy/viewtopic.php?p=467026
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

User avatar
morgonzola
Posts: 161
Joined: Thu 22 Apr 2010, 03:14
Location: Los Angeles, CA

#50 Post by morgonzola »

well i installed xboxdrv (duh :lol: ) and then it needed libboost-thread1.42.0 which is available from Debian's site

i ripped debs of these and i am not sure if it works with turbopup due to a different glibc? (correct me if im wrong)

and yea i agree i think puppy arcade is a great puplet all you really need to do is adapt it to newer versions (or not)

i made the xboxdrv+liboost thing into an sfs so i can upload if you want.

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

#51 Post by sc0ttman »

morgonzola wrote:well i installed xboxdrv (duh :lol: ) and then it needed libboost-thread1.42.0 which is available from Debian's site

i ripped debs of these and i am not sure if it works with turbopup due to a different glibc? (correct me if im wrong)

and yea i agree i think puppy arcade is a great puplet all you really need to do is adapt it to newer versions (or not)

i made the xboxdrv+liboost thing into an sfs so i can upload if you want.
If you upload it somewhere, I'll host it at ppm.scottjarvis.com, with all my other stuff... I don't have an xbox pad to play with, but someone might like it!
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

nomenclaturist
Posts: 1
Joined: Fri 08 Apr 2011, 19:02

FCEU Screen Size in Puppy

#52 Post by nomenclaturist »

Hi. I've been using FCEU (which seems to work much better than NEStopia on my machines - one is an Asus EEE with an Atom processor and the other is a whitebox with a Pentium IV).

The only problem with FCEU is that it runs in a small box covering only about a third of the screen, centered in a black band covering the rest of the screen. Not sure why this is the case because MAME takes up the whole screen just fine on both machines.

I've tried playing with the settings, but when resolution is set to anything larger than 800x600 games simply don't load. I also tried the "scale" setting, and when set to anything larger than 2X again, games just don't load. Anyway, even if resolution can't be increased, it would be nice if the gaming box could take up a larger portion of the screen. Any suggestions as to how to make this happen?

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

Re: FCEU Screen Size in Puppy

#53 Post by sc0ttman »

nomenclaturist wrote:Hi. I've been using FCEU (which seems to work much better than NEStopia on my machines - one is an Asus EEE with an Atom processor and the other is a whitebox with a Pentium IV).

The only problem with FCEU is that it runs in a small box covering only about a third of the screen, centered in a black band covering the rest of the screen. Not sure why this is the case because MAME takes up the whole screen just fine on both machines.

I've tried playing with the settings, but when resolution is set to anything larger than 800x600 games simply don't load. I also tried the "scale" setting, and when set to anything larger than 2X again, games just don't load. Anyway, even if resolution can't be increased, it would be nice if the gaming box could take up a larger portion of the screen. Any suggestions as to how to make this happen?
Yes, install OpenGL and get it working, then use FCEU with OpenGL enabled - the stretch option and various other display options will now work fine.
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

gedditoffme
Posts: 4
Joined: Thu 31 Mar 2011, 01:14

#54 Post by gedditoffme »

Hey all,

I'm having trouble getting my gamepads working. They just don't seem to be recognised by ROMLoader or RejoystickCC. However, they do respond in 'Joypad Calibrator - gamepad setup' (the axes seem a bit screwy, but it's there).

There was an install CD with the gamepads (which are really cheap ones from Hong Kong), but I expect it is Windows only.

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

#55 Post by sc0ttman »

gedditoffme wrote:Hey all,

I'm having trouble getting my gamepads working. They just don't seem to be recognised by ROMLoader or RejoystickCC. However, they do respond in 'Joypad Calibrator - gamepad setup' (the axes seem a bit screwy, but it's there).

There was an install CD with the gamepads (which are really cheap ones from Hong Kong), but I expect it is Windows only.
I'm guessing your joypad is not supported by the linux kernel.. There is a list somewhere, maybe in /root/quick-tips, or on this forum...

I tend to only use PS2 style Logitech joypads as they are supported by linux as standard, they are also cheap and work well, for a range of systems (MAME, SNES, NES, etc)..

Maybe try typing 'rejoystick' in the terminal, to load the CLI version, without the joypad checks wrapper that I added - that might work better for you.
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

OFC Dark Puppy
Posts: 30
Joined: Sun 24 Apr 2011, 04:47

#56 Post by OFC Dark Puppy »

Maybe someone already covered this.

I love this distro and I want to use it desperately. However I don't have blank cds at the moment. Could it be frugally installed manually like any other pup?

Would that hurt it's performance?

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

#57 Post by sc0ttman »

OFC Dark Puppy wrote:Maybe someone already covered this.

I love this distro and I want to use it desperately. However I don't have blank cds at the moment. Could it be frugally installed manually like any other pup?

Would that hurt it's performance?
It can be installed just like any other pup, and no it won't hurt performance, it will improve it, unless your HD is slower than a CD! (very, very unlikely, unless it's reaaaaally old!)
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

gedditoffme
Posts: 4
Joined: Thu 31 Mar 2011, 01:14

#58 Post by gedditoffme »

sc0ttman wrote:
gedditoffme wrote:Hey all,

I'm having trouble getting my gamepads working. They just don't seem to be recognised by ROMLoader or RejoystickCC. However, they do respond in 'Joypad Calibrator - gamepad setup' (the axes seem a bit screwy, but it's there).

There was an install CD with the gamepads (which are really cheap ones from Hong Kong), but I expect it is Windows only.
I'm guessing your joypad is not supported by the linux kernel.. There is a list somewhere, maybe in /root/quick-tips, or on this forum...

I tend to only use PS2 style Logitech joypads as they are supported by linux as standard, they are also cheap and work well, for a range of systems (MAME, SNES, NES, etc)..

Maybe try typing 'rejoystick' in the terminal, to load the CLI version, without the joypad checks wrapper that I added - that might work better for you.
I can't find that list of supported joysticks, but it can't be completely unsupported if it is being detected in "Joypad Calibrator".

No luck wiith rejoystick from the terminal though.

OFC Dark Puppy
Posts: 30
Joined: Sun 24 Apr 2011, 04:47

#59 Post by OFC Dark Puppy »

Another quick question. With so little in Puppy Arcade unrelated to gaming, how do I get those graphics drivers into it?

Also I'm concerned that my ATI is no longer usable. Any tips on how to maximize performance in a buggy intel card?

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

#60 Post by sc0ttman »

OFC Dark Puppy wrote:Another quick question. With so little in Puppy Arcade unrelated to gaming, how do I get those graphics drivers into it?

Also I'm concerned that my ATI is no longer usable. Any tips on how to maximize performance in a buggy intel card?
Same way as all other puppies - download the PET file containing the correct drivers for your card and install.. Links in the first post.

Note: I previously tried to port the puppy 5 OpenGL drivers installer thing built into QuickPet into puppy 4, but the CLI utilities it relies apon give very different information in puppy 4 and 5... But the links for the drivers are in the first post..
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

#61 Post by sc0ttman »

gedditoffme wrote:I can't find that list of supported joysticks, but it can't be completely unsupported if it is being detected in "Joypad Calibrator".

No luck wiith rejoystick from the terminal though.
Hmmm... maybe it's not fully supported, and is being recognised incorrectly as something else..

You could also try joy2key (or something)... Dingo has posted it in the Games section of this forum...
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

tims944
Posts: 2
Joined: Fri 20 May 2011, 03:22

To new to know what im doing

#62 Post by tims944 »

I'm new to all of this linux stuff. I've gotten it installed to a flashdrive, and tried to boot it and i'm stuck at the grub command screen. What do i need to do to get past it and run this please. i realy want to kick some old school butt i haven't seen in almost 2 decades

cthisbear
Posts: 4422
Joined: Sun 29 Jan 2006, 22:07
Location: Sydney Australia

#63 Post by cthisbear »

tims944:

This what I do for multiboot Puppies.

The third last post.

http://murga-linux.com/puppy/viewtopic. ... 5&start=30

"""""""""

For Puppy Arcade I Call the folder >>> puppyarcade

And I add this to my menu....


title Puppy Arcade (sdc1/puppyarcade)
find --set-root --ignore-floppies /puppyarcade/initrd.gz
kernel /puppyarcade/vmlinuz pmedia=usbflash psubdir=puppyarcade
pfix=fsck
initrd /puppyarcade/initrd.gz

////////

So use the Hiren's formatter...posted there....zip file.

Next >> Hirens Grub4dos...zip

Extract >> Hirens grldr - makes USB multi bootable

to your usb.

My folder names and many other Puppy menus are there.

Just works...just boots.

Chris.

tims944
Posts: 2
Joined: Fri 20 May 2011, 03:22

Puppy arcade 10

#64 Post by tims944 »

Either I didn't understand it or I just too new.
I gave all that a shot and got no where.
I'm not trying to use other programs to get past the first boot dialog grub screen. But thank you for the try

User avatar
sc0ttman
Posts: 2812
Joined: Wed 16 Sep 2009, 05:44
Location: UK

Re: Puppy arcade 10

#65 Post by sc0ttman »

tims944 wrote:Either I didn't understand it or I just too new.
I gave all that a shot and got no where.
I'm not trying to use other programs to get past the first boot dialog grub screen. But thank you for the try
Try the "frugal installer" instead of "universal installer".. the frugal installer will most likely setup everything for you, but the universal installer is not so clever (although it is required to do a full install, as opposed to a frugal install).
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]

Post Reply