sfs_load-2.4 on-the-fly
1.1 does not work for me in puppy 4.2, it fails at line 1180, cos the $PUPSFS variable seems not to be set correctly.. I think it is empty.
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
I have been using sfs_load-0.1 in Puppy Lucid 520 and I have noticed that my selections to load are ignored on a reboot.
Some load, but others do not.
Since I have 1.22gig free in my pupsave, should this be happening?
Also, do I have to unload all my SFS selections before updating to version 1.1?
Inquiring minds want to know.
I am back with news, I uninstalled the older version of sfs_load-0.1 and installed the latest.
All of my selected SFS files loaded except one.
It was reported as being in the que, but not loaded.
Evidently, my 3 gigs of memory is not enough to load it since I also have a LOT of PETs installed taking up memory.
What brought me to this point was the fact that my kernel source and devx SFS fiiles were in my load list, but devx, although all the files for it appeared in the tree was failing to respond to "make" and "gcc".
Now at least if I see some SFS is shown as being in the que, but not loaded, I know I just did not have room for it along with the other SFS files that were loaded.
Some load, but others do not.
Since I have 1.22gig free in my pupsave, should this be happening?
Also, do I have to unload all my SFS selections before updating to version 1.1?
Inquiring minds want to know.
I am back with news, I uninstalled the older version of sfs_load-0.1 and installed the latest.
All of my selected SFS files loaded except one.
It was reported as being in the que, but not loaded.
Evidently, my 3 gigs of memory is not enough to load it since I also have a LOT of PETs installed taking up memory.
What brought me to this point was the fact that my kernel source and devx SFS fiiles were in my load list, but devx, although all the files for it appeared in the tree was failing to respond to "make" and "gcc".
Now at least if I see some SFS is shown as being in the que, but not loaded, I know I just did not have room for it along with the other SFS files that were loaded.
sfs_load-1.1.1.pet
Updated sfs_load-1.1.1.pet. Get from the top of this topic.
22 Sep 2011 v1.1.1: free(busybox) version compatible
If you are using v1.1 with no problem, you need not upgrade to v1.1.1.
The version 1.1.1 is a fix for incompatible busybox on some pupplets.
22 Sep 2011 v1.1.1: free(busybox) version compatible
If you are using v1.1 with no problem, you need not upgrade to v1.1.1.
The version 1.1.1 is a fix for incompatible busybox on some pupplets.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
shino, thanks for the update mate
I have been using 1.1 for awhile in slacko very successfully.
1.1.1 is going straight in.
<ot>Just to draw your attention, some stuff as you know is updated in gtkdialog. Slacko is going with the cutting edge version (for better or worse ), but I will let you know there is syntax that should be corrected for some icons in some of your apps. (does not affect sfs_load, I think grub4dos-config it does)
Ref:<-- http://www.murga-linux.com/puppy/viewto ... 753#558753
</ot>
[edit, actually it's only an "input file stock" error for gtkdialog-info]
Sorry about OT!
Cheers Mick
I have been using 1.1 for awhile in slacko very successfully.
1.1.1 is going straight in.
<ot>Just to draw your attention, some stuff as you know is updated in gtkdialog. Slacko is going with the cutting edge version (for better or worse ), but I will let you know there is syntax that should be corrected for some icons in some of your apps. (does not affect sfs_load, I think grub4dos-config it does)
Ref:<-- http://www.murga-linux.com/puppy/viewto ... 753#558753
</ot>
[edit, actually it's only an "input file stock" error for gtkdialog-info]
Sorry about OT!
Cheers Mick
Puppy Linux Blog - contact me for access
sfs_load start
'sfs_load start' at the function mountpart() mount the partition and set UNMOUNTMEshinobar wrote:
I cannot understand what is the problem.
At boot, 'sfs_load start' is excuted and it may search unloaded sfs in case some is registered but not loaded. Otherwise sfs_load does nothing.
.....
UNMOUNTME=""
mount $OPT /dev/$PART /mnt/$MPART || return
UNMOUNTME=/dev/$PART
MNTPNT=/mnt/$MPART
but do not unmount the partition after.
I work in PUPMODE=5
Re: sfs_load start
@mories
maybe i understand the problem.
Old puppies always mount the partition that has the main sfs.
Recent puppies unmount the partition if the PC has enough RAM to store the whole sfs.
The sfs_load mounts the patition as old puppies.
Ok, it will be fixed. Please wait a while.
Tnx mories.
maybe i understand the problem.
Old puppies always mount the partition that has the main sfs.
Recent puppies unmount the partition if the PC has enough RAM to store the whole sfs.
The sfs_load mounts the patition as old puppies.
Ok, it will be fixed. Please wait a while.
Tnx mories.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
sfs_load-1.2
UPDATE: sfs_load-1.2.pet. See the top of this topic.
This is a small bugfix release. You need not upgrade if you are happy with the version you are currently using.
But all the pupplet developers are encouraged to upgrade to this new version for their new release.
#26 Sep 2011 v1.2: fix was undesired mount (thanks to mories), fix was fleezed input in combobox, fix ramsize
This is a small bugfix release. You need not upgrade if you are happy with the version you are currently using.
But all the pupplet developers are encouraged to upgrade to this new version for their new release.
#26 Sep 2011 v1.2: fix was undesired mount (thanks to mories), fix was fleezed input in combobox, fix ramsize
Last edited by shinobar on Sat 29 Oct 2011, 16:07, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
-
- Posts: 8
- Joined: Wed 21 Sep 2011, 01:03
Hi,
I have Lucid Puppy 5.2.8 running on a 2GB flash drive, and PUPMODE=7.
I tried to use Load-on-the-Fly for lupu_devx_528-3.sfs, but it told me that this is experimental for PUPMODE=7. I clicked OK to this message. It then gave me a fatal error (see screenshot, attached).
------------------
puppynoob101
I have Lucid Puppy 5.2.8 running on a 2GB flash drive, and PUPMODE=7.
I tried to use Load-on-the-Fly for lupu_devx_528-3.sfs, but it told me that this is experimental for PUPMODE=7. I clicked OK to this message. It then gave me a fatal error (see screenshot, attached).
------------------
puppynoob101
- Attachments
-
- image-6.png
- screenshot of fatal error
- (7.46 KiB) Downloaded 1021 times
Test release: sfs_load-1.2.9.pet
Test release: sfs_load-1.2.9.pet available. See the top post.
The first supports unionfs (Racy 5.1.110). Also expected to work on usual Puppy.
(Version 1.2 and older do not support most recent Racy 5.1.110, kernel 3.0.7 with unionfs patch. )
The first supports unionfs (Racy 5.1.110). Also expected to work on usual Puppy.
(Version 1.2 and older do not support most recent Racy 5.1.110, kernel 3.0.7 with unionfs patch. )
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
-
- Posts: 60
- Joined: Sat 22 Jan 2011, 07:50
Any body can give me a clue or a link, how run this apps at transparent background (command line) without gui? This because I love fresh frugal, and control the system with startup script.
Before, I created a startup script, and use ln or cp command. Of course this method have a lot trouble and work.
Thanks ....
Before, I created a startup script, and use ln or cp command. Of course this method have a lot trouble and work.
Thanks ....
command line
For the usage, on the terminal, type:mhanifpriatama wrote:how run this apps at transparent background (command line) without gui?
Code: Select all
sfs_load --help
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Thank you Shino
Sfs_load-1.2.9 was able to successfully load the latest Racy devx (unionfs) and libreoffice-3.4.3, an sfs I had previously constructed. (Applications tested and working).
Cheers
Sfs_load-1.2.9 was able to successfully load the latest Racy devx (unionfs) and libreoffice-3.4.3, an sfs I had previously constructed. (Applications tested and working).
Cheers
Puppy Linux Blog - contact me for access
Working for me as well, in a Puppy 4.2 derivative... Great stuff...
[b][url=https://bit.ly/2KjtxoD]Pkg[/url], [url=https://bit.ly/2U6dzxV]mdsh[/url], [url=https://bit.ly/2G49OE8]Woofy[/url], [url=http://goo.gl/bzBU1]Akita[/url], [url=http://goo.gl/SO5ug]VLC-GTK[/url], [url=https://tiny.cc/c2hnfz]Search[/url][/b]
Failure with PUPMODE=7
thanks puppynoob101 and thkn777 for the report.
I could reproduce the failure with PUPMODE=7.
Currently it does not support PUPMODE=7 (saving session in entire partition on a flash device).
Use the bootmanager to load sfs.
But i recommend to make a fresh install and save your session in a file to make PUPMODE=13, not to the entire partition.
EDIT: sfs_load v.1.3 supports PUPMODE=7, but i still recommend saving your session in a file(so that the PUPMODE=13), not to the partition.
I could reproduce the failure with PUPMODE=7.
Currently it does not support PUPMODE=7 (saving session in entire partition on a flash device).
Use the bootmanager to load sfs.
But i recommend to make a fresh install and save your session in a file to make PUPMODE=13, not to the entire partition.
EDIT: sfs_load v.1.3 supports PUPMODE=7, but i still recommend saving your session in a file(so that the PUPMODE=13), not to the partition.
Last edited by shinobar on Thu 17 Nov 2011, 14:33, edited 1 time in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Russian translation
I have updated Russian translation for sfs_load.
- Attachments
-
- ru.po.gz
- (5.09 KiB) Downloaded 491 times
UPDATE: sfs_load-1.3
13 Nov 2011 v1.3: fix could not unload excess sfs(>6) with some version of busybox, PUPMODE=7(same as PUPMODE=2), error message at unload failure
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
added to wiki
http://puppylinux.org/wikka/SFSLoad
also have you seen, SFSdirloader, seems like SFSLoad has a similar function?
http://www.murga-linux.com/puppy/viewtopic.php?t=44601/
http://puppylinux.org/wikka/SFSLoad
also have you seen, SFSdirloader, seems like SFSLoad has a similar function?
http://www.murga-linux.com/puppy/viewtopic.php?t=44601/