SolidPup 5.1.1-B Lite and OBXF
Final Release?
Hi Tman, just checking to see if you were still going to do a final release for this. I noticed in Saluki postings that you were going to be scaling back. If you are not, could you please let us know? Thanks for all your contributions to Puppy and all your hard work. Thanks, Rob
-
- Posts: 75
- Joined: Sat 10 May 2008, 09:40
SolidPup rocks on 64mb Toshiba laptop
Tman, this late arrival and fan of your work will miss you already!
I may see if your other project works on my IBM T41 lappy but the
inverter or something vid-wise is hooped and although I can use ext.
monitor I find it annoying to crane my head when using it, and havent
been playing on it,. Whichever comes first - patience, repair or
replacement, I will let you know if Saluki works for me - I love the
logo!! Very classy, as much else I have seen from you.
Ok ..I started with a Toshiba Satelite 490cdt - 64mb ram, 3.4G hd,
(incl.512M Linux swap) a buggy S3 2mb vid card, which I loved due to
how solidly it is built -has the dock, and ext. floppy.. My pet project was
getting Puppy on it - ran most versions tried- some slow, but they go!
But the memory and vid card were hurting me.
I just found a 4060XCDT for $20, hoped I could add memory from the
other but the chip was dead- so this lil rescue is a Pll 233 w/64mb
XP bloating 3.5 of the 6G hd, using 512mb Linux swap, Trident 2MB
vid. card. 5.28 works great actually, but too big so too slow, and I
haven't found a cutdown version yet so looked around.
Compared to the other lite pups I have tried - SolidPup is the best
(Note to those of us with old old dogs: I need to use PLoP to boot
from USB with this bios, and add to my config file the " pfix=nocopy
pmedia=cd" to a) boot from USB and b) load the savefile, but only
have nosmp from frugal without issue) I may wipe everything soon
and try a full install to see if it speeds up FF or SM, but it zips very
well w/Dillo.
X detects video cleanly @ 1024x768 16 Bit. Country settings work
and are persistant, and has the locale files needed.
Network settings are not persistant, but are retained in IC Wizard
so I need to scan for my network each time at home to get connected
but my LinksysW54GUSB was detected and rt73usb loaded by default.
Funny thing, I took it into work to show off Puppy on this, booted w/
savefile, found that IC Wizard auto detected and connect to the only
no-password!!wireless connection in the bldg..yeah for me, but shame
on them!!
One thing I liked was the way conky was setup in Akita. I miss that in
Solid, but I use Htop for the moment, I will look into what I can do later
Unlike Akita, in Solid and Warytiny I have sound on 1st boot. Much faster
than Snow or Ice Pup but still appealing..
I was hoping for a sm. flash capable browser, FF SM are far too slow, SM
kills me w/error popups too, Firepup/FDog are too old for YT. Midori/flash
is also broken in the other wary based pups, and I think the 420 based
ones too. It seemed fast until it hung somewhere.. I heard Arora is good.
I updated the repos, but no love, I will poke around ibiblio etc. for pets
but if no luck will stick w/Dillo actually flies esp. compared to SM and FF
and is much prettier than the text based browsers, but I can't log in to
Hotmail (forget the error -no flash or java maybe). Sorry doubt I will
ever want to print from this beast, so not sure but think it would work
just fine if I did..
All in all SolidPup made this POS laptop run very well, I thank you
for your hard work, and sharing of your time. I am happily posting
from it right now Will let you know about Saluki in the future.
Take care!
I may see if your other project works on my IBM T41 lappy but the
inverter or something vid-wise is hooped and although I can use ext.
monitor I find it annoying to crane my head when using it, and havent
been playing on it,. Whichever comes first - patience, repair or
replacement, I will let you know if Saluki works for me - I love the
logo!! Very classy, as much else I have seen from you.
Ok ..I started with a Toshiba Satelite 490cdt - 64mb ram, 3.4G hd,
(incl.512M Linux swap) a buggy S3 2mb vid card, which I loved due to
how solidly it is built -has the dock, and ext. floppy.. My pet project was
getting Puppy on it - ran most versions tried- some slow, but they go!
But the memory and vid card were hurting me.
I just found a 4060XCDT for $20, hoped I could add memory from the
other but the chip was dead- so this lil rescue is a Pll 233 w/64mb
XP bloating 3.5 of the 6G hd, using 512mb Linux swap, Trident 2MB
vid. card. 5.28 works great actually, but too big so too slow, and I
haven't found a cutdown version yet so looked around.
Compared to the other lite pups I have tried - SolidPup is the best
(Note to those of us with old old dogs: I need to use PLoP to boot
from USB with this bios, and add to my config file the " pfix=nocopy
pmedia=cd" to a) boot from USB and b) load the savefile, but only
have nosmp from frugal without issue) I may wipe everything soon
and try a full install to see if it speeds up FF or SM, but it zips very
well w/Dillo.
X detects video cleanly @ 1024x768 16 Bit. Country settings work
and are persistant, and has the locale files needed.
Network settings are not persistant, but are retained in IC Wizard
so I need to scan for my network each time at home to get connected
but my LinksysW54GUSB was detected and rt73usb loaded by default.
Funny thing, I took it into work to show off Puppy on this, booted w/
savefile, found that IC Wizard auto detected and connect to the only
no-password!!wireless connection in the bldg..yeah for me, but shame
on them!!
One thing I liked was the way conky was setup in Akita. I miss that in
Solid, but I use Htop for the moment, I will look into what I can do later
Unlike Akita, in Solid and Warytiny I have sound on 1st boot. Much faster
than Snow or Ice Pup but still appealing..
I was hoping for a sm. flash capable browser, FF SM are far too slow, SM
kills me w/error popups too, Firepup/FDog are too old for YT. Midori/flash
is also broken in the other wary based pups, and I think the 420 based
ones too. It seemed fast until it hung somewhere.. I heard Arora is good.
I updated the repos, but no love, I will poke around ibiblio etc. for pets
but if no luck will stick w/Dillo actually flies esp. compared to SM and FF
and is much prettier than the text based browsers, but I can't log in to
Hotmail (forget the error -no flash or java maybe). Sorry doubt I will
ever want to print from this beast, so not sure but think it would work
just fine if I did..
All in all SolidPup made this POS laptop run very well, I thank you
for your hard work, and sharing of your time. I am happily posting
from it right now Will let you know about Saluki in the future.
Take care!
Thanks charbaby66 for the nice letter
I helped get Saluki going but it is mostly Jemimah's work.
I have uploaded SolidPup 5.1.1-Final. A lighter 97MB version with Tint2 panel is also available.
I will still be around in the puppy forum, but I don't intend to make any new pups for a long time and these are the last versions to be based on Wary 5.1.1.
I helped get Saluki going but it is mostly Jemimah's work.
I have uploaded SolidPup 5.1.1-Final. A lighter 97MB version with Tint2 panel is also available.
I will still be around in the puppy forum, but I don't intend to make any new pups for a long time and these are the last versions to be based on Wary 5.1.1.
Last edited by Tman on Mon 16 Jan 2012, 06:28, edited 4 times in total.
SolidPup Final
Thanks Tman, that was fast. Thanks again for all you have done for Puppy Linux. Thanks, Rob
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
One day we both might be able to use woof2I helped get Saluki going but it is mostly Jemimah's work.
Saluki is emerging into something unique
as Jemimah develops her unique style
http://puppylinux.org/wikka/Saluki
You did good, it is the Puppy way . . .
Hope your influence continues.
Maybe some new 'SolidPup 2' will be a derivative of the completed Saluki . . . who knows
Fare thee Well
Recently, I discovered that after the last time I modified my Firefox packages, Flash-chess would no longer run with it, whereas it would run fine in Seamonkey.
So I had to rethink how to package it differently while still trying to keep Firefox compatible with many versions of Puppy. The changes I have made can be found -> here and the pets and sfs can be found in the first page of the same thread.
Also my latest Firefox pet can also be downloaded with GetPackage.
It worked for me in Dpup, Lucid, Slacko and Wary/Racy and should work in other versions of Puppy as long as they don't have any other missing dependencies.
So I had to rethink how to package it differently while still trying to keep Firefox compatible with many versions of Puppy. The changes I have made can be found -> here and the pets and sfs can be found in the first page of the same thread.
Also my latest Firefox pet can also be downloaded with GetPackage.
It worked for me in Dpup, Lucid, Slacko and Wary/Racy and should work in other versions of Puppy as long as they don't have any other missing dependencies.
If I remember correctly, newer versions of Firefox requires a newer flashplayer-plugin. A pet is available -> heretlchost wrote: Fluppy 013 on bootable USB .... FF can not play videos on You Tube....
Thom
Also, if you want a flashplayer downloader script, Shinobar's version is good. The thread for it is ->here
I have made a custom search html file that combines a google search with the well-minded puppy search. I find it also loads faster than using Firefox's about:home as well as Google's home page. And if you click on the logo, it takes you to the murga forum.
Edit: I have removed the original tar.gz file and replaced it with a pet that installs it into /root/my-documents. The html file has been further cut-down.
Edit: I have removed the original tar.gz file and replaced it with a pet that installs it into /root/my-documents. The html file has been further cut-down.
- Attachments
-
- custom_search.png
- (67.79 KiB) Downloaded 1112 times
Last edited by Tman on Mon 05 Mar 2012, 00:43, edited 1 time in total.
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Re: SolidPup 5.1.1 FINAL
Downloaded to other computer:
ASUS P5A from about 1998
ISA SB16 sound card
2 PATA HDDs on primary IDE
2 optical drives on secondary IDE
So far only classic 214X boots without a very long delay after GRUB says it's loading the vmlinuz and the initrd.gz
Like some other Puppys I've tried, this SolidPup has the long delay.
I searched on line, and some people mention the
as possibly related?ata3:00:qc timeout (cmd 0xec)
ata3:00: failed to IDENTIFY (I/O error, err_mask=0x5)
Those lines occur 3 times in dmesg, and same for ata3.01
Code: Select all
title Solid
root (hd1,8)
kernel /vmlinuz
initrd /initrd.gx
Thank you.
Shouldn't the last part of your code be initrd.gz? or was that a typo?
Also, Have you tried using the grub4dos config tool to automatically detect and configure your pups?
I have mine frugally installed in /mnt/home/solid511. The following is one of my grub4dos codes:
Grub4Dos, sets the code differently for different computers, but once you have it automatically detect your Operating Systems, you should be able to figure the rest out by looking the the menu.lst file
But keep a backup of your old bootconfig file just in case.
Also, Have you tried using the grub4dos config tool to automatically detect and configure your pups?
I have mine frugally installed in /mnt/home/solid511. The following is one of my grub4dos codes:
Code: Select all
title SolidPup 5.1.1 - Normal Mode
find --set-root --ignore-floppies --ignore-cd /solid511/initrd.gz
kernel /solid511/vmlinuz psubdir=solid511 pmedia=atahd pfix=fsck
initrd /solid511/initrd.gz
But keep a backup of your old bootconfig file just in case.
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Solid on ASUS P5A
Yes, Tman, it was a typo.Tman wrote:Shouldn't the last part of your code be initrd.gz? or was that a typo?
Not yet, but thank you, I hope to do that soon.Also, Have you tried using the grub4dos config tool to automatically detect and configure your pups?
Many thanks for such a prompt reply - I appreciate it.I have mine frugally installed in /mnt/home/solid511. The following is one of my grub4dos codes:Grub4Dos, sets the code differently for different computers, but once you have it automatically detect your Operating Systems, you should be able to figure the rest out by looking the the menu.lst fileCode: Select all
title SolidPup 5.1.1 - Normal Mode find --set-root --ignore-floppies --ignore-cd /solid511/initrd.gz kernel /solid511/vmlinuz psubdir=solid511 pmedia=atahd pfix=fsck initrd /solid511/initrd.gz
But keep a backup of your old bootconfig file just in case.
Thus far I'd just added a Solid stanza(?) to the existing menu.lst, in /mnt/sdb6/boot/grub/
Re: Solid on ASUS P5A
I am not all too familiar with grub, as the grub4dos config tool that comes standard in many pups has done what I needed it to do.sheldonisaac wrote: Thus far I'd just added a Solid stanza(?) to the existing menu.lst, in /mnt/sdb6/boot/grub/
I always install grub4dos to the mbr on the first partition of my first hard-drive.
Grub4dos uses a menu.lst file as well, which makes it easy to confuse the two.
A quick google search led me to some grub menu.lst samples:
How to edit Grub menu.lst