Legacy OS 2 Released (Download Now!)

News, happenings
Message
Author
Sage
Posts: 5536
Joined: Tue 04 Oct 2005, 08:34
Location: GB

#46 Post by Sage »

..sadden me to see a number of users like yourself having this amount of trouble.
Runs on all my single core stuff up to 939, too. I wonder whether folks having trouble are trying to run it in the presence of other Puppies, distros and the most undesirable of all OS? General advice is to disconnect all other HDs, fit a cleaned, old 3.2/4.3/10Gb unit, format ext2, swap partition~200Mb and do a FULL install. john's LegacyOS is well outside the original aims and intentions of the original Puppy, so is best used like a conventional distro - not as if he hasn't stuffed it full of goodies. Try to avoid tricky HW like Intel video, HP/Cq laptops, etc. Take my advice and dig out an old board, preferably AMD. My preference is for those old 1200 Durons - millions were produced - free with cornflakes - cut&paint to reduce the multiplier and stick the FSB up as far as possible. This approach produces results far superior with all Puppies to most recent junk; well worth the effort.

Germador
Posts: 7
Joined: Mon 14 Mar 2011, 00:03
Location: Yellville, Arkansas
Contact:

Legacy OS 2

#47 Post by Germador »

My first encounter was a bad burn. I resorted to having Legacy OS 1 in the IDE ROM and Legacy OS 2 in the SATA ROM. Legacy OS 1 tried to upgrade. My second encounter I redownloaded Legacy OS 2 and it looked like 2 instead of 1. I watched Sneeky's video to refresh myself. Instead of installing to a hard drive I did it to flash drive. After several attempts at a ext 2 I tried an ext 3 and it loaded. Still working on the etho 0 and etho 1. Flash upgraded through another IDE hard drive. Having trouble with grub. I had an easier time with Legacy OS 1.

User avatar
john biles
Posts: 1458
Joined: Sun 17 Sep 2006, 14:05
Location: Australia
Contact:

#48 Post by john biles »

Hello Sage,
You have a way with words that always bring a smile to my face. I'm getting the feeling also that a PC with nothing fancy (Hardware) and with 1 or 2 Hard Drives with less then 8 Partitions in total is the best candidate for a successful install. My releases have always been created with a full install in mind. Yes you can run it live but the experience wouldn't be as enjoyable.

Hello Germador,
With Legacy OS 2 I focused on updated a number of apps and sytem files like ffmpeg etc. While the Installer was updated with easier to follow instructions, it still works like it did in the first Legacy. There should be no difference in installing both?
Legacy OS 2017 has been released.

Sage
Posts: 5536
Joined: Tue 04 Oct 2005, 08:34
Location: GB

#49 Post by Sage »

You have a way with words...
Better than having away with ditto!

User avatar
kjurkic
Posts: 29
Joined: Wed 18 Jul 2007, 16:15
Location: Terrace, BC Canada - The Great *Wet* North

Legacy OS 2 in Virtualbox

#50 Post by kjurkic »

Hi all

Played with this puppy for a while trying many different settings to get to boot inside virtualbox4.x. No joy so far - it presents a black screen and no disk activity whatsoever when trying to set xorg. :(

Xvesa produces an illegible 8-color desktop, but no interaction.

So far I have changed disk types (ide/sata) bus types, processor VT acceleration on/off, PAE on/off, etc.

regards
Ken

Sage
Posts: 5536
Joined: Tue 04 Oct 2005, 08:34
Location: GB

#51 Post by Sage »

boot inside virtualbox
Why?!

User avatar
kjurkic
Posts: 29
Joined: Wed 18 Jul 2007, 16:15
Location: Terrace, BC Canada - The Great *Wet* North

Why?

#52 Post by kjurkic »

Sage wrote:
boot inside virtualbox
Why?!
Why did Hillary climb Everest?





I was just exploring its usability. I have a couple of older PC's, but not on hand at my location for testing.

-Ken

User avatar
nitehawk
Posts: 658
Joined: Sun 13 Apr 2008, 22:30
Location: West Central Florida

#53 Post by nitehawk »

Hey,....John!!!!
take a lookey at distrowatch!!! LegacyOS must be catching the attention of quite a few folks,....'cause it's it's up to the #8 spot! I'm on this dratted slow dialup,....so can't download (gotta wait 'til I can get a CD somewhere). ......meanwhile, I'll still be using good ol' LegacyOS #1.

cthisbear
Posts: 4422
Joined: Sun 29 Jan 2006, 22:07
Location: Sydney Australia

#54 Post by cthisbear »

Now number 7.

nitehawk...
if you want something I can send it from OZ

for free...as a one timer.

Chris.

User avatar
nitehawk
Posts: 658
Joined: Sun 13 Apr 2008, 22:30
Location: West Central Florida

#55 Post by nitehawk »

cthisbear wrote:Now number 7.

nitehawk...
if you want something I can send it from OZ

for free...as a one timer.

Chris.
..thanks for the offer, cthisbear,............
but that's a long ways, an' a lot of trouble for ya. I'm sure LegacyOS will be on some of the major linux cd sites very soon. I'm using Wary Puppy also (so I have that to fall back on).....(as well as debian and slackware 13.37).....so I'm kept pretty busy! :lol:

cthisbear
Posts: 4422
Joined: Sun 29 Jan 2006, 22:07
Location: Sydney Australia

#56 Post by cthisbear »

Number 4.

Chris.

Sage
Posts: 5536
Joined: Tue 04 Oct 2005, 08:34
Location: GB

#57 Post by Sage »

Number 4.
Clearly, john has exceeded even his own expectations. Proof, if needed, that what punters really desire is a polished product, extensively debugged, attention to the minutia - that works.
Users of certain SiS chipsets and some laptops will still have to edit the GRUB menu to add an acpi parameter - usually acpi=force - in order to overcome the kernel/4.12 shortcoming of shutdown failure: nothing to do with john, of course (cf. previous extensive discussion on the subject).

gnomic
Posts: 78
Joined: Sat 21 Aug 2010, 00:14

wifi

#58 Post by gnomic »

Trying wifi again on CPQ laptop E500, this time with Atheros PC Card, aka PCMCIA. Initially no interface seen post boot tho' the status led on the card was flashing. Loaded ath_pci with network setup. However attempts to authenticate with secured access point still fizz out. I expect this is a problem with authentication via wpa/tkip. Is the more recent simple network setup compatible with Legacy 2? As seen in recent Puppy versions alongside the traditional jumping through all the hoops approach? Will have to revise what is involved with the command line approach and wpa_supplicant. Puppy Network Setup wasn't great with wpa until v4 or later. Then there is Frisbee as seen in Fluppy and Snowpuppy. See you have wpa_cli but no wpa_gui, however both depend on the wpa_supplicant.conf file being set up with the required info.

No cli web browser provided? Speaking of web browsers I suppose you may have seen that our new Google overlords are going to start insisting on a very recent browser version for their various services. Unclear whether any version of Opera is included. Maybe Legacy users aren't candidates for the cloud. Could be a hassle with using gmail.

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#59 Post by Colonel Panic »

Tried installing it, but I can't get the bootloader (GRUB) to work. It works OK out of a savefile on another Linux distro's partition on the hard drive though.

Despite the bootup problems on my computer, it's an impressive piece of work. I may well be sticking with it for the remainder of the (probably short) life of this machine.

Thanks for a good piece of work and best wishes,

CP .
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

tinker
Posts: 52
Joined: Thu 06 Dec 2007, 19:12
Location: Midwestern United States

what about mini?

#60 Post by tinker »

I have an eee pc 900 with the original simplified linux OS on the ssd.I mostly use jemimah's puppeee on an sd card in the slot, and I never actually boot the original os on the ssd. I wonder about trying a full install of legacy OS. I noted on the wikka page about your mini version. Should I be trying that on my eeepc (even though it's older) or should I try installing your new version 2?

User avatar
john biles
Posts: 1458
Joined: Sun 17 Sep 2006, 14:05
Location: Australia
Contact:

#61 Post by john biles »

Hello tinker,
100% use TEENpup 2010 Mini on you EeePC, Legacy OS 2 won't boot from a Hard Drive install.
While Legacy OS 2 has just been released, it is aimed at a different user. Trust me TEENpup 2010 Mini is for you.
Legacy OS 2017 has been released.

tinker
Posts: 52
Joined: Thu 06 Dec 2007, 19:12
Location: Midwestern United States

will try teenpup mini

#62 Post by tinker »

thanks, john

I'll download mini and try that on my eeepc.

I'm currently downloading legacy os 2, which will still be valuable to try on my other machines.

oligin10
Posts: 193
Joined: Sat 17 Jul 2010, 15:47
Location: Buckeye State, USA

Opera 11.11

#63 Post by oligin10 »

Hi Tinker, you may want to try to update your Opera browser. I am running TeenPup 2010 and it will speed up your browsing quite a bit. Please download Opera 11.11 pet and just install it. It will keep all the settings from Opera 10 and everything should work fine. Try to do it from a live session first, just to make sure it doesn't cause you any problems. You can find it here: "http://www.murga-linux.com/puppy/viewtopic.php?t=39444"
Thanks, Rob

arby
Posts: 37
Joined: Sat 30 Aug 2008, 04:16

Swap Partition Inactive?

#64 Post by arby »

Hi!

I have a question regarding the linux swap partition.
I've installed per the instructions on a P3 with 128M RAM.
I made a 500M swap partition as recommended.

The system boots and runs successfully, but the
swap partition usage always shows 0% no matter
what programs I run.

I've checked it with Gparted, it's mounted and active.
I've run the "swapon -a" command and seen no change.

The swap partition always seems inactive. What can I do?
Just wondering if I can increase performance any.

gnomic
Posts: 78
Joined: Sat 21 Aug 2010, 00:14

boot on dell d610 laptop

#65 Post by gnomic »

From LOS2 on a Dell Latitude d610. Booted OK and X Window started without problems.

However still having trouble with wifi to WPA access point. Can't see why so far. Have been nosing around in config files. There is an apparently sane wpa_supplicant.conf in /etc that seems to know about the right access point and has generated a psk, but for some unknown reason it seems either association with the ap is failing or perhaps authentication.

Tried earlier on the CPQ E500 with atheros card still without success. Another distro using wicd works on this gear.

This post via wired interface eth0 which works no problems.

sh-3.00# lspci
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express Root Port (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 03)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 03)
00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon Mobility M300]
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
03:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
03:01.5 Communication controller: Texas Instruments PCI6515 SmartCard Controller
03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI Adapter (rev 05)

Post Reply