Other Distros

Puppy related raves and general interest that doesn't fit anywhere else
Message
Author
User avatar
Burn_IT
Posts: 3650
Joined: Sat 12 Aug 2006, 19:25
Location: Tamworth UK

#2476 Post by Burn_IT »

It's an option which Windows users don't NEED
"Just think of it as leaving early to avoid the rush" - T Pratchett

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

#2477 Post by Billtoo »

belham2 wrote:
Billtoo wrote:
My main OS is Gecko-Linux Rolling, I checked the package manager for
Enlightenment and installed it on my laptop:

Hi Bill,

Sorry to bug you again...was wondering if I could ask a question about Gecko-rolling (since it is based on OpenSUSE Tumbleweed, which I use as one of my main, big distros) and SSDs. Have you installed Gecko-Rolling on any SSD? If so, can I ask if you've done or do anything special in prepping the SSD (assuming it is full install or a big partition install)?

I bought a new SSD, and am trying to read about how Linux handles SSDs and that each distro might be need to set up differently to optimize and maintain the SSD. From reading, I found that Ubuntu and Linux Mint changed their distro (kernels) to install and set up fstrim to run once a week, which is vital for SSD health. But other Linux distributions, including Debian and Fedora, do not. The user has to set everything (script included) up manually in order for "fstrim" to run.

What did you do for OpenSUSE (I see in your specs listed, when you test distros, you usually always mention it is on a SSD)? I read this from OpenSUSE: https://en.opensuse.org/SDB:SSD_discard_(trim)_support , but as is sometimes typical from OpenSUSE explanations, you can't make heads or tails sense (as a user) what you're actually supposed to do.

Thanks for any help/tips/suggestions
Hi,

I have Gecko on one SSD (128GB Verbatim USB-3.0) but I wasn't aware
that any special maintenance was required to keep the SSD healthy.
I didn't use that particular install much and am now running Gecko
Gnome from the hard drive.

There may be a setting in Yast that deals with it but the openSuse
forum would be the place to find out more about installing to an SSD I guess.

rokytnji
Posts: 2262
Joined: Tue 20 Jan 2009, 15:54

#2478 Post by rokytnji »

Easy to do manually

Code: Select all

#fstrim -v /
/: 3.7 GiB (3928014848 bytes) trimmed
# fstrim -v /home
/home: 24.2 GiB (25944813568 bytes) trimmed
Attachments
scr-thumb.jpg
(43.46 KiB) Downloaded 1433 times

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Other Distros

#2479 Post by Billtoo »

I found this link that talks about SSD's in openSuse:

https://lizards.opensuse.org/2015/02/06 ... -opensuse/

belham2
Posts: 1715
Joined: Mon 15 Aug 2016, 22:47

Here's the Deepin DE Environment on latest Debian Testing

#2480 Post by belham2 »

Ok, one, two, three HAILS for Sparky Linux! This distro (based on Debian Testing) is carving out a niche, quickly, and justifiably. They're from Poland, and they use Debian Testing as the base, and then give you the choice of an incredible array of desktop environments to put on top. All from inside their graphical CLI (sounds counterintuitive, I know, but try it, it is awesome and simple) after you download a minimal install (basically the Debian Testing Minimal ISO (~480MB). So, after getting the Minimal ISO installed, fired up the "Sparky-Installer", and easily went thru the paces setting up the Deepin Desktop environment. And I can confirm (as you are hearing from the Youtube videos popping up about it---and also what I mentioned a few msgs ago in this thread)....the Deepin DE has to be contending for not only the desktop envirnoment of the year, but also the future. It is simple, yet powerful, fast, and it is drop-dead gorgeous. The Deepin team (In China) has done an incredible job (it is the fastest growing DE in Asia right now, and spreading).

Below are some pictures of Deepin on this Sparky Debian Testing. I hope the pics can do this DE some justice. From the little things like holding your mouse over the sound icon in the taskbar and just scrolling the wheel to either raise or lower the sound (genius, right?), to the simple, tight elegance of their full on dark theme & icons (this theme even wraps up Firefox and Thunderbird, something other Linux themes struggle with and force you download add-on dark themes for those). Also, look at that beautiful, transparent launcher (just click the purple rocket in the left taskbar, and their is everything to launch in your system). Also, look at the system settings, to the right, just click the settings icon on the middle-right of the taskbar, and look at that simple full-side right hand pop up that has every setting for the system. Overall, just tightness, simpleness, and beauty.

Short end of the stick here? You're doing yourself, if you are a Linux luver, a disservice if you are not giving the Deepin DE a try. It is, with Enlightement and Moksha DEs, the future of DE Linux environments. In fact, it is arguably the one everyone is aspiring to be right now.
Attachments
screen00.png
(202.04 KiB) Downloaded 1337 times
screen0aa.png
(201.29 KiB) Downloaded 1231 times
screen1a.png
(157.52 KiB) Downloaded 1211 times
screen2a.png
(163.62 KiB) Downloaded 1215 times
screen3aa.png
(208.1 KiB) Downloaded 1191 times
screen4a.png
(147.06 KiB) Downloaded 1257 times
screen5a.png
(53.38 KiB) Downloaded 1198 times

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#2481 Post by Colonel Panic »

I'm always (OK, usually) willing to admit when I've been wrong about something as I don't believe you can learn any other way. Anyway, I have to eat humble pie now.

One of my favourite distros in the past was the "full" version of OpenSUSE; Li-f-e (Linux For Education). It's a big download but it contains pretty much all the software I need and use on a regular basis, and all the multimedia codecs as well (which even Mint no longer has now, apparently).

I've now installed the latest version, 42.1.1, and done a full update overnight (about 1.8 GB of downloads) and I can't see any problems at all with bootup or anything else, despite the fact it runs on systemd. Lesson learned.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Other Distros

#2482 Post by Billtoo »

Gecko-Linux Rolling installed to the hard drive of my Macmini:

bill@Macmini:~> inxi -bw
System: Host: Macmini Kernel: 4.8.13-1-default x86_64 (64 bit) Desktop: Xfce 4.12.3
Distro: openSUSE Tumbleweed
Machine: Device: laptop System: Apple product: Macmini6 1 v: 1.0
Mobo: Apple model: Mac-031AEE4D24BFF0B1 v: Macmini6 1
UEFI: Apple v: MM61.88Z.0106.B03.1211161202 date: 11/16/2012
CPU: Dual core Intel Core i5-3210M (-HT-MCP-) speed/max: 1200/2501 MHz
Graphics: Card: Intel 3rd Gen Core processor Graphics Controller
Display Server: X.Org 1.18.4 drivers: intel (unloaded: modesetting,fbdev)
Resolution: 1920x1080@60.00hz
GLX Renderer: Mesa DRI Intel Ivybridge Mobile GLX Version: 3.0 Mesa 13.0.2
Network: Card-1: Broadcom Limited NetXtreme BCM57766 Gigabit Ethernet PCIe driver: tg3
Card-2: Broadcom Limited BCM4331 802.11a/b/g/n driver: wl
Drives: HDD Total Size: 500.1GB (4.4% used)
Weather: Conditions: 28 F (-2 C) - light snow Time: December 11, 5:53 PM EST
Info: Processes: 207 Uptime: 1:14 Memory: 517.8/15953.0MB Client: Shell (bash) inxi: 2.3.5
bill@Macmini:~> free
total used free shared buff/cache available
Mem: 16335876 450488 14193360 68196 1692028 15535800
Swap: 2104316 0 2104316
bill@Macmini:~>

Computer is connected to a 32" TV by HDMI cable.
It is working well.
Attachments
screenshot.jpg
(35.67 KiB) Downloaded 1077 times

User avatar
Moat
Posts: 955
Joined: Tue 16 Jul 2013, 06:04
Location: Mid-mitten

#2483 Post by Moat »

I had a brief play with the just-released MX Linux 16;

https://distrowatch.com/?newsid=09669

https://mxlinux.org/

Really, really impressive. If anyone is interested in a systemd-free (uses SysVInit) stable Debian Jesse with an extremely well fleshed-out and complete Xfce desktop (which can be a biotch to arrive at with Debian, IMHO) - including a number of very neat and useful Anti-X/MX applications/modules, and it's own additional repo with a GUI app specifically for it - I'd heartily recommend giving this distro a good spin!! If only I had a spare HD to install to... I'd really like to run with this one for a good long while. Thumbs way up! :)

This distro's popularity appears to be increasing, and I can see why. Heck, even Dedoimedo might like this one! :lol:

Bob
Attachments
MX16-Screenshot-2.jpg
After a few tweaks...
(137.92 KiB) Downloaded 917 times

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#2484 Post by Colonel Panic »

Moat wrote:I had a brief play with the just-released MX Linux 16;

https://distrowatch.com/?newsid=09669

https://mxlinux.org/

Really, really impressive. If anyone is interested in a systemd-free (uses SysVInit) stable Debian Jesse with an extremely well fleshed-out and complete Xfce desktop (which can be a biotch to arrive at with Debian, IMHO) - including a number of very neat and useful Anti-X/MX applications/modules, and it's own additional repo with a GUI app specifically for it - I'd heartily recommend giving this distro a good spin!! If only I had a spare HD to install to... I'd really like to run with this one for a good long while. Thumbs way up! :)

This distro's popularity appears to be increasing, and I can see why. Heck, even Dedoimedo might like this one! :lol:

Bob
Good review Moat. It's a fair bet that Dedo likes MX, since he recently interviewed its developers;

http://www.dedoimedo.com/computers/inte ... -team.html

In other news, I've just installed Mint 18.1 Cinnamon (which has just come out) and it's working well with no problems so far. The only slight letdown for me is that I miss the old default Mint wallpaper, with the 3-D letters and numbers casting shadows on a grey background. They've stopped producing (or at least including) it for some reason.
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

User avatar
Moat
Posts: 955
Joined: Tue 16 Jul 2013, 06:04
Location: Mid-mitten

#2485 Post by Moat »

Colonel Panic wrote: It's a fair bet that Dedo likes MX, since he recently interviewed its developers;

http://www.dedoimedo.com/computers/inte ... -team.html
Ha - whaddya' know... :) Another feature of MX-16 I'd like to explore are the remastering and USB tools - looks as if one could create a USB with persistence using 'em.

Mint is great, probably the most polished, complete Linux distro OOTB that exists today. I've had tremendous luck and stability with two regular Mint Mate installs (one going on 2-1/2 years). I'm sure you can find that favorite wallpaper set... actually, it's likely they're even in Quiana/Rebecca's repo(s)... I'd guess - install Synaptic, update the package lists, and search on, say, "Rebecca artwork" - might find 'em...

Bob

belham2
Posts: 1715
Joined: Mon 15 Aug 2016, 22:47

#2486 Post by belham2 »

Moat wrote:
Colonel Panic wrote: It's a fair bet that Dedo likes MX, since he recently interviewed its developers;

http://www.dedoimedo.com/computers/inte ... -team.html
Ha - whaddya' know... :) Another feature of MX-16 I'd like to explore are the remastering and USB tools - looks as if one could create a USB with persistence using 'em.

Mint is great, probably the most polished, complete Linux distro OOTB that exists today. I've had tremendous luck and stability with two regular Mint Mate installs (one going on 2-1/2 years). I'm sure you can find that favorite wallpaper set... actually, it's likely they're even in Quiana/Rebecca's repo(s)... I'd guess - install Synaptic, update the package lists, and search on, say, "Rebecca artwork" - might find 'em...

Bob

Moat,

If you get the 'USB with persistence' thing figured out on MX, please let us know. I have a fond spot for MX when I first tried it about ~2yrs ago, and saw how nicely it was laid out (also I've always had and still do a current AntiX cd for running off of the Cd).

As far as Mint, is there any of us that hasn't tried it and/or still have it on one of our HDs' partitions? I do. Mint just keeps getting better and better and better, and they slowly but surely have left Ubuntu & Unity behind. Everything just works, and they include everything in the distro plus the Out house sink. Problem is, coming from the puppy world, I like to get my hands dirty sometimes, and there's nothing ever to do in Mint (actually, it is because you really can't customize Mint like you can most any other linux distro). But Mint, especially Sarah, sure has been stable for me, almost...dare I say...as stable as my trusty CentOS 7.




P.S. Any of you run Manjaro XFCE? I've been using it for ~3 weeks now on one machine and I am quite impressed how far along they've come. There's still some of the usual Manjaro problems (like their infernal bootloader never playing nice if any other Linux distro bootloader takes over, and their still quirkiness with the package managers & updating), but overall, Manjaro has done far more than any other distro---outside of Antergos----I can see to bring Arch to the masses or to those who no longer want to fool around going thru the lengthy steps to set up a full arch install. I'm too old anymore...lol.....to find the beauty in self-flagellation when setting up either a full Arch (and/or also Gentoo) install. :lol:

User avatar
Moat
Posts: 955
Joined: Tue 16 Jul 2013, 06:04
Location: Mid-mitten

#2487 Post by Moat »

Colonel Panic wrote: I miss the old default Mint wallpaper, with the 3-D letters and numbers casting shadows on a grey background.
Oh, wait, d'oh - I see your old favorite wallpaper includes the release number in the artwork. Bummer, then. Unless you make/modify one yourself! :wink:

Bob

User avatar
Moat
Posts: 955
Joined: Tue 16 Jul 2013, 06:04
Location: Mid-mitten

#2488 Post by Moat »

belham2 wrote: If you get the 'USB with persistence' thing figured out on MX, please let us know.
Will do. A short fit of researching it last night gave me the impression that it can only be done from a full install of MX to a hard drive. So... must find myself a spare hard drive...!

Bob

anticapitalista

#2489 Post by anticapitalista »

Moat wrote:
belham2 wrote: If you get the 'USB with persistence' thing figured out on MX, please let us know.
Will do. A short fit of researching it last night gave me the impression that it can only be done from a full install of MX to a hard drive. So... must find myself a spare hard drive...!

Bob
Wrong. Run it live not installed.

User avatar
Moat
Posts: 955
Joined: Tue 16 Jul 2013, 06:04
Location: Mid-mitten

#2490 Post by Moat »

Ahh - good news... I'll dig further. Thanks, anticapitalista - and congrats on a great release!

Bob

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Other Distros

#2491 Post by Billtoo »

I installed GeckoLinux_Gnome.x86_64-422.161213.0.iso (981MB) to the
hard drive of my hp desktop.

Computer
Processor 6x AMD Phenom(tm) II X6 1045T Processor
Memory 8174MB (935MB used)
Operating System openSUSE 42.2 (x86_64)
User Name bill (Bill)
Date/Time Sun 18 Dec 2016 03:16:02 PM EST
Display
Resolution 3840x1080 pixels
OpenGL Renderer Gallium 0.4 on AMD REDWOOD (DRM 2.43.0, LLVM 3.8.0)
X11 Vendor The X.Org Foundation
Version
Kernel Linux 4.4.36-8-default (x86_64)
Compiled #1 SMP Fri Dec 9 16:18:38 UTC 2016 (3ec5648)
C Library GNU C Library version 2.22 (git bbab82c25da9) (stable)
Default C Compiler Unknown
Distribution openSUSE 42.2 (x86_64)

I added my favorite applications with the package manager, it comes
with plenty by default.

It works well so far.
Attachments
Screenshot.jpg
(50.89 KiB) Downloaded 1404 times

User avatar
Colonel Panic
Posts: 2171
Joined: Sat 16 Sep 2006, 11:09

#2492 Post by Colonel Panic »

Moat wrote:Oh, wait, d'oh - I see your old favorite wallpaper includes the release number in the artwork.
Yes it does.
Moat wrote:Bummer, then. Unless you make/modify one yourself! :wink:

Bob
I don't think the numbers etc. in that image file can be edited directly (using GIMP or something similar), otherwise I'd have a go myself. I may ask on the Mint forums if anyone's managed to do it. Thanks for replying anyway Bob.

[EDIT: for the time being anyway I'm using this image as wallpaper. It's a picture of what I think is one of the world's most beautiful places, Patagonia in Argentina;

http://cdn.zoxexivo.com/blogphotos/pata ... nia-24.jpg
Gigabyte M68MT-52P motherboard, AMD Athlon II X4 630, 5.8 GB of DDR3 RAM and a 250 GB Hitachi hard drive running Ubuntu 16.04.6, MX-19.2, Peppermint 10, PCLinuxOS 20.02, LXLE 18.04.3, Pardus 19.2, exGENT 200119, Bionic Pup 8.0 and Xenial CE 7.5 XL.

belham2
Posts: 1715
Joined: Mon 15 Aug 2016, 22:47

Porteus 3.2.1 CINNAMON x86_64 29 Nov '16 ISO

#2493 Post by belham2 »

Hi all,

Below is a pic of the Porteus' gang latest 3.2.1 CINNAMON desktop, x86_64, 29 Nov 2016 ISO. Everything is based on Slackware 14.2 (USM Package Manager), and I gotta say, they really put together something nice here. Theme looks great, it still boots the lightening fast Porteus is known for, and it is smooth whether running off the SD card I installed it to, or running it fully in ram. The ISO comes 270MB. I installed (via the USM) the latest Firefox, Chrome, Mtpaint, Redshift & GTKHash modules, and it brought it all up ~390MB. With Gnome Player (and a lot of other stuff) already included by default, this Cinnamon edition is really nice. Congrats/Kudos to the Porteus team! Happy Holidays all!! (in the pic, the System Settings menu is on the left, the top right is Nemo file manager, below it is gnome-terminal, and then a shot of the taskbar menu with it resting on "Internet'.....it's a dual monitor setup, going right to left)
Attachments
porteuspic2.resized.png
(216.58 KiB) Downloaded 1296 times

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#2494 Post by James C »

Fresh install of MX-16.
https://mxlinux.org/

Code: Select all

james@mx1:~
$ inxi -Fxx
System:    Host: mx1 Kernel: 4.7.0-0.bpo.1-amd64 x86_64 (64 bit gcc: 4.9.2)
           Desktop: Xfce 4.12.2 (Gtk 2.24.25) dm: lightdm
           Distro: MX-16_x64 Metamorphosis 12 December 2016
Machine:   Device: desktop Mobo: ASUSTeK model: M5A97 LE R2.0 v: Rev 1.xx
           BIOS: American Megatrends v: 2601 date: 03/24/2015
CPU:       Triple core AMD FX-6300 Six-Core (-HT-MCP-) cache: 6144 KB
           flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm) bmips: 21072
           clock speeds: min/max: 1400/3500 MHz 1: 2000 MHz 2: 1400 MHz 3: 2500 MHz 4: 2000 MHz
           5: 3000 MHz 6: 1400 MHz
Graphics:  Card: NVIDIA GT218 [GeForce 210] bus-ID: 01:00.0 chip-ID: 10de:0a65
           Display Server: X.Org 1.16.4 drivers: nvidia (unloaded: modesetting,fbdev,vesa,nouveau)
           Resolution: 1440x900@59.89hz
           GLX Renderer: GeForce 210/PCIe/SSE2
           GLX Version: 3.3.0 NVIDIA 340.96 Direct Rendering: Yes
Audio:     Card-1 NVIDIA High Definition Audio Controller
           driver: snd_hda_intel bus-ID: 01:00.1 chip-ID: 10de:0be3
           Card-2 Advanced Micro Devices [AMD/ATI] SBx00 Azalia (Intel HDA)
           driver: snd_hda_intel bus-ID: 00:14.2 chip-ID: 1002:4383
           Sound: Advanced Linux Sound Architecture v: k4.7.0-0.bpo.1-amd64
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
           driver: r8169 v: 2.3LK-NAPI port: d000 bus-ID: 02:00.0 chip-ID: 10ec:8168
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 1c:87:2c:5a:bb:e2
Drives:    HDD Total Size: 1120.2GB (1.2% used)
           ID-1: /dev/sda model: KINGSTON_SV300S3 size: 120.0GB serial: 50026B7256076A16
           ID-2: /dev/sdb model: WDC_WD10EZEX size: 1000.2GB serial: WD-WCC3F6XAKRLY
Partition: ID-1: / size: 96G used: 4.9G (6%) fs: ext4 dev: /dev/sdb3
           ID-2: swap-1 size: 8.60GB used: 0.00GB (0%) fs: swap dev: /dev/sdb5
Sensors:   System Temperatures: cpu: 10.6C mobo: N/A gpu: 0.0:32C
           Fan Speeds (in rpm): cpu: 0
Info:      Processes: 211 Uptime: 3 min Memory: 486.3/15953.8MB
           Init: SysVinit v: 2.88 runlevel: 5 default: 5 Gcc sys: 4.9.2
           Client: Shell (bash 4.3.301 running in xfce4-terminal) inxi: 2.3.5 

Code: Select all

$ free
             total       used       free     shared    buffers     cached
Mem:      16336700    1106604   15230096      27048      25328     590732
-/+ buffers/cache:     490544   15846156
Swap:      8396796          0    8396796
$ 
Attachments
MX-16.jpg
(66.46 KiB) Downloaded 1292 times

rokytnji
Posts: 2262
Joined: Tue 20 Jan 2009, 15:54

#2495 Post by rokytnji »

Just migrated from mx-15 TO mx-16 ON THE SHOP computer.

Used.
https://forum.mxlinux.org/viewtopic.php ... 97#p402469

No need for a re-install. Went as smooth as silk.

Post Reply