newest kernel 3.1.8 & 3.0.16 test on lupu528

A home for all kinds of Puppy related projects
Message
Author
User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

re

#31 Post by wuxiandianzi »

calexand wrote:Hey Ttuuxxx,
Might I ask you why the dev-x for this Pup is the smaller one (116mb) and not the dev-x_2 larger one (139mb) that got posted later for the original LUPU?
I mean, what makes the difference/decision?
Thank a lot!
CA
sorry, I am wuxiandianzi, not Ttuuxxx.
you know that squashfs file is compressed with xz not "lzm". XZ is newer lzm.

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

re

#32 Post by wuxiandianzi »

maxpro4u wrote:Frugal install- pwidgets cpu temp does not work here-displays 0c.
ok ,thank you. there is something wrong in it.

live
Posts: 223
Joined: Wed 10 Feb 2010, 21:04

#33 Post by live »

hi
you mean that this kernel can not surpport your graphica card?
This kernel surpport cpu >= pentium M
I said I don't think that the problem comes from the kernel, as works with
* 3.0.3 with Plop Linux
* 2.6.39.1 with AV Linux 5.0
* 2.6.37.6 with Luci 528

Does not work with
* Your release
* Midnight Sun Pup 002 with 2.6.35.7 and 003 with 2.6.38.4
* Ubuntu 11.04 and 11.10beta1

davec51
Posts: 530
Joined: Thu 13 Apr 2006, 22:31
Location: Virginia

No Internet with This Pup

#34 Post by davec51 »

Strange. I have Puppy 528 frugally installed, but when I frugally installed this version and booted with "pfix=ram I couldn't connect to the internet. Message was there were no modules available. How could the kernel affect this feature?

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

Re: No Internet with This Pup

#35 Post by wuxiandianzi »

davec51 wrote:Strange. I have Puppy 528 frugally installed, but when I frugally installed this version and booted with "pfix=ram I couldn't connect to the internet. Message was there were no modules available. How could the kernel affect this feature?
Thank you, pfix=ra controled by "init" in initrd.gz.I will find what was wrong.

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#36 Post by bigpup »

This is from Barry's blog. Could be causing some of your problems.
I cannot yet go up to a 3.x kernel as there are some scripts in Puppy that are hard-coded to expect "2.6".
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

rodin.s
Posts: 344
Joined: Wed 22 Sep 2010, 19:50
Location: Ukraine

kernel patch is needed

#37 Post by rodin.s »

A person from Russian Puppy Forum has tested this build and he says that sound, video and wi-fi work, but he wants to compile proprietary driver to test 3D-graphics and he needs kernel source patch. Is it possible to get it somewhere.

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

Re: kernel patch is needed

#38 Post by wuxiandianzi »

rodin.s wrote:A person from Russian Puppy Forum has tested this build and he says that sound, video and wi-fi work, but he wants to compile proprietary driver to test 3D-graphics and he needs kernel source patch. Is it possible to get it somewhere.
Here is aufs3 patches which I get from http://aufs.sourceforge.net

usb-storage.patch is patched by mysef (which leant from Barry)
Attachments
3.0.4-usb-storage.patch.tar.gz
(661 Bytes) Downloaded 387 times

rodin.s
Posts: 344
Joined: Wed 22 Sep 2010, 19:50
Location: Ukraine

#39 Post by rodin.s »

Thank you.

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

re

#40 Post by wuxiandianzi »

rodin.s wrote:Thank you.
with pleasure!

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#41 Post by Lobster »

=========
rodin.s wrote:Thank you.
I am in links. I am in the forum. It took me about 15 minutes to get here. This is for uber geeks. The slackware gurus will approve. This is hardcore. I think this is the first step in compiling my x driver in assembly and running it on anything remotely penguin. After this every browser is joyous.
===========

guys
this is off topic - I am in the wrong forum and using Slacko b2 :shock:
It is however a test of the links text based browser (hard to use) so if a moderator do not move.
This is what it is about
http://www.murga-linux.com/puppy/viewto ... 593#564593

Normal service is now resumed :)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
eztuxer
Posts: 494
Joined: Thu 06 Nov 2008, 11:19
Location: Hungary
Contact:

#42 Post by eztuxer »

Runs fine on AAO netbook on USB stick.
@ 1.6 GHz with 1.5 GB ram.
Runs also on Fujitsu Siemens Esprimo E
@ 3.0 GHz with 4.0 GB ram.
Thank you for this brand new pup.
Don't poop it down... Pup it Up !

User avatar
ilanrab
Posts: 100
Joined: Sun 01 Apr 2007, 14:01

Re: sorry!

#43 Post by ilanrab »

ttuuxxx wrote:
wuxiandianzi wrote:sorry sorry ...
I will rebuild it as a pure "lupu"
No problem at all, I did think about doing that myself a few times (actually about a hundred times), but then I figured some lawyers with cops would kick down my door. lol
ttuuxxx
Sounds like the MS-Monopoly's Nazi tactics have had their intended affect on the populations.
Illegal/immoral monopolies must not be allowed to push for legislation of illegitimate laws, that may be supported by unscrupulous attorneys, and enforced by corrupt police power.
lol??? Not funny at all. :x
[b]ir[/b]

User avatar
Béèm
Posts: 11763
Joined: Wed 22 Nov 2006, 00:47
Location: Brussels IBM Thinkpad R40, 256MB, 20GB, WiFi ipw2100. Frugal Lin'N'Win

#44 Post by Béèm »

wuxiandianzi
Can you reduce the picture width in your first post so it fits on small screens.
Embedded pictures may not exceed 600 pixels wide here.
Time savers:
Find packages in a snap and install using Puppy Package Manager (Menu).
[url=http://puppylinux.org/wikka/HomePage]Consult Wikka[/url]
Use peppyy's [url=http://wellminded.com/puppy/pupsearch.html]puppysearch[/url]

rodin.s
Posts: 344
Joined: Wed 22 Sep 2010, 19:50
Location: Ukraine

sfs_load fix

#45 Post by rodin.s »

I have fixed sfs loading and mounting for 3-d kernel. I have changed three files: filemnt, bootmanager and sfs_load (all in /usr/sbin)
Barry was right about this "some scripts in Puppy that are hard-coded to expect "2.6"."
Attachments
sfs_load.gz
(18.91 KiB) Downloaded 411 times
filemnt.gz
(1.9 KiB) Downloaded 421 times
bootmanager.gz
(7.24 KiB) Downloaded 410 times

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

re

#46 Post by wuxiandianzi »

eztuxer wrote:Runs fine on AAO netbook on USB stick.
@ 1.6 GHz with 1.5 GB ram.
Runs also on Fujitsu Siemens Esprimo E
@ 3.0 GHz with 4.0 GB ram.
Thank you for this brand new pup.
Sounds good! thank you for testing.

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

sorry

#47 Post by wuxiandianzi »

Béèm wrote:wuxiandianzi
Can you reduce the picture width in your first post so it fits on small screens.
Embedded pictures may not exceed 600 pixels wide here.
I am sorry, I did not think about picture width on small screens.

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

Re: sfs_load fix

#48 Post by wuxiandianzi »

rodin.s wrote:I have fixed sfs loading and mounting for 3-d kernel. I have changed three files: filemnt, bootmanager and sfs_load (all in /usr/sbin)
Barry was right about this "some scripts in Puppy that are hard-coded to expect "2.6"."
Rodin.s:Thank you every much!
You have saved me! good job!

User avatar
peebee
Posts: 4370
Joined: Sun 21 Sep 2008, 12:31
Location: Worcestershire, UK
Contact:

#49 Post by peebee »

Hi there

Downloaded and tried a manual frugal install in a named subdirectory on my HP550 laptop with an NTFS formatted hard disk.

Seems to run incredibly fast but 2 fundamental and showstopping problems encountered:

1. can't create a savefile - the 1st shutdown dialogue doesn't ask me for a size and goes straight to a summary page that shows a savefile size of -1024MB - and no savefile is created

2. my wifi is not detected even though the b43 modules appear to be present.....

Would love to try it more if these could be fixed....

Cheers
PeeBee
ImageLxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64

User avatar
wuxiandianzi
Posts: 136
Joined: Tue 28 Apr 2009, 09:42
Location: china

re

#50 Post by wuxiandianzi »

peebee wrote:Hi there

Downloaded and tried a manual frugal install in a named subdirectory on my HP550 laptop with an NTFS formatted hard disk.

Seems to run incredibly fast but 2 fundamental and showstopping problems encountered:

1. can't create a savefile - the 1st shutdown dialogue doesn't ask me for a size and goes straight to a summary page that shows a savefile size of -1024MB - and no savefile is created

2. my wifi is not detected even though the b43 modules appear to be present.....

Would love to try it more if these could be fixed....

Cheers
PeeBee
ok thank you

Post Reply