Slacko Puppy 5.3.1
Fresh manual frugal install of Slacko 530 (2.6.37.6) on my old P3 test box.No problems.
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3
Chip description:
00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)
Driver used by Xorg:
intel
Video mode used by Xorg:
Resolution: "" Depth: Depth 24
...the above also recorded in /tmp/report-video
# glxgears
191 frames in 5.0 seconds = 38.164 FPS
209 frames in 5.0 seconds = 41.490 FPS
211 frames in 5.0 seconds = 41.968 FPS
207 frames in 5.0 seconds = 41.240 FPS
208 frames in 5.0 seconds = 41.580 FPS
-Computer-
Processor : Pentium III (Coppermine)
Memory : 254MB (116MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 25 Oct 2011 11:03:43 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Software Rasterizer
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH
-Version-
Kernel : Linux 2.6.37.6 (i686)
Compiled : #1 SMP Sun Jul 10 08:27:28 EST 2011
C Library : GNU C Library version 2.13 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
# free
total used free shared buffers
Mem: 254128 247200 6928 0 26564
Swap: 1020092 80 1020012
Total: 1274220 247280 1026940
#
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3
Chip description:
00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)
Driver used by Xorg:
intel
Video mode used by Xorg:
Resolution: "" Depth: Depth 24
...the above also recorded in /tmp/report-video
# glxgears
191 frames in 5.0 seconds = 38.164 FPS
209 frames in 5.0 seconds = 41.490 FPS
211 frames in 5.0 seconds = 41.968 FPS
207 frames in 5.0 seconds = 41.240 FPS
208 frames in 5.0 seconds = 41.580 FPS
-Computer-
Processor : Pentium III (Coppermine)
Memory : 254MB (116MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Tue 25 Oct 2011 11:03:43 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Software Rasterizer
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801AA-ICH
-Version-
Kernel : Linux 2.6.37.6 (i686)
Compiled : #1 SMP Sun Jul 10 08:27:28 EST 2011
C Library : GNU C Library version 2.13 (stable)
Default C Compiler : Unknown
Distribution : Unknown distribution
# free
total used free shared buffers
Mem: 254128 247200 6928 0 26564
Swap: 1020092 80 1020012
Total: 1274220 247280 1026940
#
PAE-HIGHMEM kernel 2.6.39.4 ( thanks for that info James C )
# free
total used free shared buffers
Mem: 7787828 710688 7077140 0 42508
Swap: 0 0 0
Total: 7787828 710688 7077140
#report-video-glx
Tue 25 Oct 2011 Operating System: Slacko Puppy-5.3 Linux 2.6.39.4
1.0 VGA compatible controller: ATI Technologies Inc Device 9640
oem: AMD ATOMBIOS product: SUMO 01.00
X Server: Xorg Driver: fglrxdrm: vendor=FireGL - ATI Technologies Inc.
X.Org version: 1.9.5
dimensions: 1680x1050 pixels (444x277 millimeters)
depth of root window: 24 planes
AMD A8-3850 APU with Radeon(tm) HD Graphics
Core 0: 2899 1: 2899 2: 2899 3: 2899 MHz
# glxgears
36710 frames in 5.0 seconds = 7341.903 FPS
38253 frames in 5.0 seconds = 7650.528 FPS
38205 frames in 5.0 seconds = 7640.959 FPS
38283 frames in 5.0 seconds = 7656.211 FPS
This is with the ati-fglrx pet installed.
# free
total used free shared buffers
Mem: 7787828 710688 7077140 0 42508
Swap: 0 0 0
Total: 7787828 710688 7077140
#report-video-glx
Tue 25 Oct 2011 Operating System: Slacko Puppy-5.3 Linux 2.6.39.4
1.0 VGA compatible controller: ATI Technologies Inc Device 9640
oem: AMD ATOMBIOS product: SUMO 01.00
X Server: Xorg Driver: fglrxdrm: vendor=FireGL - ATI Technologies Inc.
X.Org version: 1.9.5
dimensions: 1680x1050 pixels (444x277 millimeters)
depth of root window: 24 planes
AMD A8-3850 APU with Radeon(tm) HD Graphics
Core 0: 2899 1: 2899 2: 2899 3: 2899 MHz
# glxgears
36710 frames in 5.0 seconds = 7341.903 FPS
38253 frames in 5.0 seconds = 7650.528 FPS
38205 frames in 5.0 seconds = 7640.959 FPS
38283 frames in 5.0 seconds = 7656.211 FPS
This is with the ati-fglrx pet installed.

The tray clock.
Best I can find is it is a 24 hr clock setting only.
I guess you will need to install a different clock program.
Like Pupclockset
http://www.murga-linux.com/puppy/viewtopic.php?t=61633
Best I can find is it is a 24 hr clock setting only.
I guess you will need to install a different clock program.
Like Pupclockset
http://www.murga-linux.com/puppy/viewtopic.php?t=61633
Last edited by bigpup on Wed 26 Oct 2011, 19:22, edited 1 time in total.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
ICOn Missing
I have installed Slack Puppy 5.3 on hard disk ( frugal). After rebooting, I have missed desktop application Icons and Hard drive partition Icons. It just shows Triangle in the place of programs, etc. How to restore the programs Icons. I have noticed this problem in Warry 5.2 also. Please help me.
Ramachandran
Calicut
Ramachandran
Calicut
Puppy Linux Blog - contact me for access
- Lobster
- Official Crustacean
- Posts: 15522
- Joined: Wed 04 May 2005, 06:06
- Location: Paradox Realm
- Contact:
scoop on the high tech lab
Ah the new Puppy developer is hard at compiling . . .
I had a go compiling this browser
http://www.glennmcc.org/aralinux/
. . . gave up during dependency training
. . . better leave it to the smart pups and their new fangled
green computers . . .
installled 5.3- 2.6.37.6 pfix=ram, manual frugal to ext4 on dell d610 pentium m. auto-connected to wifi detecting broadcom b43 driver made connection without issue using sns.
the save file does need to be on same partition. first save placed on another partition and it crashed on reboot unable to find the save file. sound, vidio, everything tried works.
the save file does need to be on same partition. first save placed on another partition and it crashed on reboot unable to find the save file. sound, vidio, everything tried works.
- Attachments
-
- hardinfo_report.html.gz
- (58.55 KiB) Downloaded 766 times
-
- 2.6.37.6 install.after.reboot.png
- (12.05 KiB) Downloaded 1618 times
- loubapache
- Posts: 54
- Joined: Wed 14 Sep 2011, 13:55
- Location: Western Michigan
Encrypted Savefile
Frugal install on EXT4 partition or booting directly from CD.
1) Slacko 5.3.0 boots fine either way.
2) Make small changes to hostname etc and shutdown.
3) Create an encrypted (heavily) save file (EXT2) on EXT4 partition.
The subsequent booting will show "Kernel panic - not syncing: Attempted to kill init!"
If the savefile is normal (not encrypted), then the subsequent booting is fine.
First saw this in RC1, then again in RC2, now in the final release.
1) Slacko 5.3.0 boots fine either way.
2) Make small changes to hostname etc and shutdown.
3) Create an encrypted (heavily) save file (EXT2) on EXT4 partition.
The subsequent booting will show "Kernel panic - not syncing: Attempted to kill init!"
If the savefile is normal (not encrypted), then the subsequent booting is fine.
First saw this in RC1, then again in RC2, now in the final release.
In that case i would boot "puppy pfix=rdsh"The subsequent booting will show "Kernel panic - not syncing: Attempted to kill init!"
[ newer puppies have several rdsh levels -> F2 & F3 @boot ]
-> this would drop you into the ram-disk-shell .
There you could try to read the files in /tmp using "e3 /tmp/bootinit.log" for example .
In frugal installations that booted ok these tmp files get copied/moved to /initrd/tmp .
I have not had time to explore slacko , though ; but follow the development with interest .
I am guessing it is not a slacko problem , but woof/initrd , but the kernel may not have some drivers like aes_generic cbc cryptoloop correctly enabled or they may be missing inside the initrd.gz .
ICON MISSING
Dear 01MIcko
I would like to inform you that your solution (terminal command) worked for me. Now I am able to see the Icons on the Desktop. Micko Sir , Thank you very much.
I would like to inform you that your solution (terminal command) worked for me. Now I am able to see the Icons on the Desktop. Micko Sir , Thank you very much.
Went ahead and did a fresh full install of Slacko-5.30 (2.6.37.6) on the Athlon XP box.Zero difficulties.
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3
Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2
Driver used by Xorg:
nvidia
Video mode used by Xorg:
Resolution: " 1440x900 " Depth: Depth 24
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
12848 frames in 5.0 seconds = 2569.542 FPS
12450 frames in 5.0 seconds = 2489.914 FPS
12899 frames in 5.0 seconds = 2579.789 FPS
12948 frames in 5.0 seconds = 2589.423 FPS
12829 frames in 5.0 seconds = 2565.766 FPS
12920 frames in 5.0 seconds = 2583.862 FPS
# report-video
VIDEO REPORT: Slacko Puppy, version 5.3
Chip description:
oem: NVidia
product: NV18 () Board Chip Rev A2
Driver used by Xorg:
nvidia
Video mode used by Xorg:
Resolution: " 1440x900 " Depth: Depth 24
...the above also recorded in /tmp/report-video
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
12848 frames in 5.0 seconds = 2569.542 FPS
12450 frames in 5.0 seconds = 2489.914 FPS
12899 frames in 5.0 seconds = 2579.789 FPS
12948 frames in 5.0 seconds = 2589.423 FPS
12829 frames in 5.0 seconds = 2565.766 FPS
12920 frames in 5.0 seconds = 2583.862 FPS
Re: ICON MISSING
You are most welcome Sir,rameshiyer wrote:Dear 01MIcko
I would like to inform you that your solution (terminal command) worked for me. Now I am able to see the Icons on the Desktop. Micko Sir , Thank you very much.
What troubles me more is why did it happen?
I will investigate.
Thank you.
Puppy Linux Blog - contact me for access
Moving back up on Distrowatch.......
http://distrowatch.com
http://distrowatch.com
- Attachments
-
- distrowatch-27-10-11.png
- (22.54 KiB) Downloaded 3010 times
I guess it would be #1 if everyone bothered to download from Distrowatch.James C wrote:Moving back up on Distrowatch.......
http://distrowatch.com
-
- Posts: 564
- Joined: Tue 09 Jun 2009, 21:06
I'm experiencing some problems with this particular build
These are the specs of the pc:
Compaq Presario F700 Notebook PC
CPU - AMD Turion(tm) 64 X2 Mobile Technology TL-58 (1900 Mhz)
RAM - 2gb DIMM DDR2 667 MHz
GFX - nVidia GeForce 7000M / nForce 610M
SFX - nVidia MCP67 High Definition Audio
LAN - nVidia MCP67 Ethernet 10/100
Wifi - Atheros AR5001 Wireless Network Adapter
I have successfully managed to run the ISO, then install it onto a USB Flash drive, however when I made a 'save file' it fails to restart. I am choosing ext2 - heavy encryption for the save file.
These are the specs of the pc:
Compaq Presario F700 Notebook PC
CPU - AMD Turion(tm) 64 X2 Mobile Technology TL-58 (1900 Mhz)
RAM - 2gb DIMM DDR2 667 MHz
GFX - nVidia GeForce 7000M / nForce 610M
SFX - nVidia MCP67 High Definition Audio
LAN - nVidia MCP67 Ethernet 10/100
Wifi - Atheros AR5001 Wireless Network Adapter
I have successfully managed to run the ISO, then install it onto a USB Flash drive, however when I made a 'save file' it fails to restart. I am choosing ext2 - heavy encryption for the save file.