bigpup wrote:Slacko 5.3 main
Still having this problem.
Frugal install to USB flash drive
Save option - save to partition sdb1(the flash drive)
menu->shutdown->reboot or poweroff
Goes to saving session to sdb1 message
Then back to desktop.
Does not poweroff computer or reboot.
If you make a save file to flash drive. no problems.
This only happens if you use save option save to sdb1 (the flash drive)
Slacko Puppy 5.3.1
Same problem here...
@Sylvander: Please try this package.
guvcview_slack_DEP-1.5.0.pet
It contains all the dependencies for guvcview required by Slacko.
guvcview_slack_DEP-1.5.0.pet
It contains all the dependencies for guvcview required by Slacko.
-
- Posts: 564
- Joined: Tue 09 Jun 2009, 21:06
Hi 01micko
Just got around to testing Slacko on my Acer Aspire One netbook and
I'm also encountering problems with 'flsynclient' and touchpad settings.
I've managed to get the tapping working fine but the problem I'm seeing is with the 'Touch Sensitivity' slider.If I move it up and down,I can eventually get the right speeds.I then save the settings and quit.If I check the settings out in .flsynclient all seems to be correct there too until I reboot,at which point I lose all control over the cursor,the'Touch Sensitivity' slider is back at '0'and I have to set it all up again.
Any help appreciated?
Just got around to testing Slacko on my Acer Aspire One netbook and
I'm also encountering problems with 'flsynclient' and touchpad settings.
I've managed to get the tapping working fine but the problem I'm seeing is with the 'Touch Sensitivity' slider.If I move it up and down,I can eventually get the right speeds.I then save the settings and quit.If I check the settings out in .flsynclient all seems to be correct there too until I reboot,at which point I lose all control over the cursor,the'Touch Sensitivity' slider is back at '0'and I have to set it all up again.
Any help appreciated?
New bug fixed version of Grub4dos.
http://www.murga-linux.com/puppy/viewtopic.php?t=51697
http://www.murga-linux.com/puppy/viewtopic.php?t=51697
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
guvcview
@rcrsn51 - Installed:
guvcview-1.5.0-s.pet
and
guvcview_slack-DEP-1.5.0.pet
Video working perfectly for my Slacko 5.3; haven't tried audio yet. Thanks for the pets!
guvcview-1.5.0-s.pet
and
guvcview_slack-DEP-1.5.0.pet
Video working perfectly for my Slacko 5.3; haven't tried audio yet. Thanks for the pets!
Acer Aspire One D255-2301 (N450 Atom @ 1.6 Ghz, 1 Gb RAM, 160 Gb HDD w/WinXP, ENE SD card reader, Alps touchpad) 5.28/5.3.1 via manual-frugal ext4 USB flash drive (4Gb) using GRUB4DOS
Re: guvcview
Audio works for me, once I get my Mic turned on.MoebusNet wrote: haven't tried audio yet.
1. Run alsamixer
2. Press Tab to select Capture.
3. Cursor right to find the Capture device (Mic doesn't work for me)
4. Cursor up to increase the volume.
5. Press Esc.
6. Test with "arecord > test.wav"
Re: guvcview
I guess great minds think alike; I just finished adjusting mike levels in retrovol to get Skype working. I completed a test call in Skype and was able to hear my own recorded voice. Video working, audio working; life is good!rcrsn51 wrote:Audio works for me, once I get my Mic turned on.MoebusNet wrote: haven't tried audio yet.
1. Run alsamixer
2. Press Tab to select Capture.
3. Cursor right to find the Capture device (Mic doesn't work for me)
4. Cursor up to increase the volume.
5. Press Esc.
6. Test with "arecord > test.wav"
Acer Aspire One D255-2301 (N450 Atom @ 1.6 Ghz, 1 Gb RAM, 160 Gb HDD w/WinXP, ENE SD card reader, Alps touchpad) 5.28/5.3.1 via manual-frugal ext4 USB flash drive (4Gb) using GRUB4DOS
-
- Posts: 361
- Joined: Fri 27 May 2011, 17:21
- Location: Reading UK
rcrsn51
Configured my Epson Stylus Color 1520 (ESC/P2) + CUPS/gutenprint
Installed Opera 11.52 from the .deb from the Opera website.
I can confirm that the three printing bugs are still the same as in lupu 5.25, but I understand them better now!
1 The print options menu item is missing so it is necessary to use opera:config printer to do the following.
- uncheck Fit to page width
- set the margins to something sensible for the printer
- set the scale factor
2 Set View Zoom to 100% before trying to print, or the print area will be wrong. (Applies to Windows too)
3 Printing particular pages doesn't work.
If I try printing page 1 of a web page that is 3 pages in print preview, this is what happens:
(in the print dialogue I set the job status to "Hold" to avoid wasting too much paper)
Three jobs appear in CUPS. In /var/spool/cups there are 3 pdfs each containing all three pages.
If I release the first job, it does actually print all three pages.
I haven't thought of a simple workaround for this yet. Any ideas?
I have set up Slacko 5.3Perhaps some of the Opera-lovers can test this.
Configured my Epson Stylus Color 1520 (ESC/P2) + CUPS/gutenprint
Installed Opera 11.52 from the .deb from the Opera website.
I can confirm that the three printing bugs are still the same as in lupu 5.25, but I understand them better now!
1 The print options menu item is missing so it is necessary to use opera:config printer to do the following.
- uncheck Fit to page width
- set the margins to something sensible for the printer
- set the scale factor
2 Set View Zoom to 100% before trying to print, or the print area will be wrong. (Applies to Windows too)
3 Printing particular pages doesn't work.
If I try printing page 1 of a web page that is 3 pages in print preview, this is what happens:
(in the print dialogue I set the job status to "Hold" to avoid wasting too much paper)
Three jobs appear in CUPS. In /var/spool/cups there are 3 pdfs each containing all three pages.
If I release the first job, it does actually print all three pages.
I haven't thought of a simple workaround for this yet. Any ideas?
DavidSDaveS wrote:If anyone wants to play with the latest Opera (11.51) I uploaded an sfs here http://puppylinuxstuff.meownplanet.net/DaveS/opera/
Tested on Slacko/Wary/Racy
ps: am aware menu icon is missing
username puppy
password linux
downloaded opera 11.52 to /mt/home/ clicked and it asked if want installed, answered yes and it placed correct menu icon.
http://www.opera.com/browser/
OpenGL
I have a question about OpenGL -
I want to make a FreeCad package, this has a lot of dependencies (Qt, Opencascade, OpenGl, Coin....). I installed Mesa Glx for Radeon and Intel cards, but I get an error during configure of Coin
http://www.opengl.org/sdk/ ?
Or is there a "Xorg-high" dev package somewhere? I couldn't find GL header files anywhere on the slacko system...
Thanks for any hints
emil
I want to make a FreeCad package, this has a lot of dependencies (Qt, Opencascade, OpenGl, Coin....). I installed Mesa Glx for Radeon and Intel cards, but I get an error during configure of Coin
What do I need? Do I need all those libraries fromchecking for OpenGL library dev-kit... unresolved
Could not figure out how to use the OpenGL software development kit
http://www.opengl.org/sdk/ ?
Or is there a "Xorg-high" dev package somewhere? I couldn't find GL header files anywhere on the slacko system...
Thanks for any hints
emil
Open Gl header files
When I build equilizer 1.01 from the SDK package I get
where can I find those?
thanks
emil
So I guess I miss the gl header files-- Supported Features: RSP OpenMP GLX [32]
CMake Error: The following variables are used in this project, but they are set to NOTFOUND.
Please set them or make sure they are set and tested correctly in the CMake files:
OPENGL_INCLUDE_DIR (ADVANCED)
where can I find those?
thanks
emil
01micko
flsynclient not working now. seems odd sure tested b4. clicking closed closes both in pic. get the same in racy.
flsynclient not working now. seems odd sure tested b4. clicking closed closes both in pic. get the same in racy.
- Attachments
-
- flsynclient.png
- (18.05 KiB) Downloaded 4255 times
Been running 11.52 myself today. Nice.jim3630 wrote:DavidSDaveS wrote:If anyone wants to play with the latest Opera (11.51) I uploaded an sfs here http://puppylinuxstuff.meownplanet.net/DaveS/opera/
Tested on Slacko/Wary/Racy
ps: am aware menu icon is missing
username puppy
password linux
downloaded opera 11.52 to /mt/home/ clicked and it asked if want installed, answered yes and it placed correct menu icon.
http://www.opera.com/browser/
Spup Frugal HD and USB
Root forever!
Root forever!
Been running my AntiX/ Macpup P3 tonight so Slacko 5.30 (2.6.37.6) live pfix=ram. Display and internet good on initial boot....audio was muted. Simple enough to unmute though.
VIDEO REPORT: Slacko Puppy, version 5.3
Chip description:
00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset Graphics Controller (CGC) (rev 04)
Driver used by Xorg:
intel
Video mode used by Xorg:
Resolution: "" Depth: Depth 24
...the above also recorded in /tmp/report-video
-Computer-
Processor : Pentium III (Coppermine)
Memory : 512MB (172MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 31 Oct 2011 04:07:23 AM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801BA-ICH2
Multimedia audio controller : Intel Corporation 82801BA/BAM AC'97 Audio Controller
Ethernet controller : 3Com Corporation 3c905C-TX/TX-M [Tornado]
VGA compatible controller : Intel Corporation 82815 Chipset Graphics Controller
# free
total used free shared buffers
Mem: 512972 496256 16716 0 68700
Swap: 1075196 0 1075196
Total: 1588168 496256 1091912
#
Appears to be working fine.
VIDEO REPORT: Slacko Puppy, version 5.3
Chip description:
00:02.0 VGA compatible controller: Intel Corporation 82815 Chipset Graphics Controller (CGC) (rev 04)
Driver used by Xorg:
intel
Video mode used by Xorg:
Resolution: "" Depth: Depth 24
...the above also recorded in /tmp/report-video
-Computer-
Processor : Pentium III (Coppermine)
Memory : 512MB (172MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 31 Oct 2011 04:07:23 AM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801BA-ICH2
Multimedia audio controller : Intel Corporation 82801BA/BAM AC'97 Audio Controller
Ethernet controller : 3Com Corporation 3c905C-TX/TX-M [Tornado]
VGA compatible controller : Intel Corporation 82815 Chipset Graphics Controller
# free
total used free shared buffers
Mem: 512972 496256 16716 0 68700
Swap: 1075196 0 1075196
Total: 1588168 496256 1091912
#
Appears to be working fine.
installed flsynclient-wrapper-20101001.pet but only shows same message on start up, see pic, regardless of reboots.jim3630 wrote:01micko
flsynclient not working now. seems odd sure tested b4. clicking closed closes both in pic. get the same in racy.
---------
new save file pfix=ram flsynclient working. try figure out what broke it.
- Attachments
-
- synclient.after.pet.png
- (7.37 KiB) Downloaded 2141 times
Last edited by jim3630 on Mon 31 Oct 2011, 18:30, edited 1 time in total.
@rcrsn51
Regarding this reply of yours to me:
SUCCESS!
I installed that PET within Slacko-5.3, and it fixed the problem I explained in my post here.
Regarding this reply of yours to me:
SUCCESS!
I installed that PET within Slacko-5.3, and it fixed the problem I explained in my post here.
Hi Mick... I know you said you wanted to 'test Opera to death', so here is a funny little system bug: lets say you have a script attached to a keybinding to do something, typically to launch a browser, it might look something like this:
, (taken from /root/.jwm/jwmrc-personal), where Seamonkey is the default browser.
Ok, will work just fine. BUT. Load Opera, exit, and the keybinding will no longer work without a re-start of X.
The fix is to de-select 'override window manager control of the pinboard and panels' from rox options Compatibility, but I dont know what implications this may have on other sub-systems.
Code: Select all
<Key keycode="117">exec:defaultbrowser</Key>
Ok, will work just fine. BUT. Load Opera, exit, and the keybinding will no longer work without a re-start of X.
The fix is to de-select 'override window manager control of the pinboard and panels' from rox options Compatibility, but I dont know what implications this may have on other sub-systems.
Spup Frugal HD and USB
Root forever!
Root forever!