Saluki
How do I get gtkhash to run in 18 so I can check 19?
I'm having a hard time today.
I am so excited to try 19 with all the new bling!!!!
However, I wanted to start out right by checking the md5 with gtkhash.
I know gtkhash is installed in Saluki.
But:
I do not see it in the control panel.
I don't see it in "run a program".
I don't see it on any of the regular menus.
I don't see it on right click when I click on the iso.
When I search for gtkhash, I find it. ,
But none of the files will start the program.
Could someone please take me by the hand and show me how, or where, or what to do,
or tell me another way to check the md5 that is not tooo geeky?
Many thanks for your patience.
Pet
I am so excited to try 19 with all the new bling!!!!
However, I wanted to start out right by checking the md5 with gtkhash.
I know gtkhash is installed in Saluki.
But:
I do not see it in the control panel.
I don't see it in "run a program".
I don't see it on any of the regular menus.
I don't see it on right click when I click on the iso.
When I search for gtkhash, I find it. ,
But none of the files will start the program.
Could someone please take me by the hand and show me how, or where, or what to do,
or tell me another way to check the md5 that is not tooo geeky?
Many thanks for your patience.
Pet
Re: How do I get gtkhash to run in 18 so I can check 19?
Pete, right clicking the file in properties "Digests" will give the optionPete22 wrote:I'm having a hard time today.
I am so excited to try 19 with all the new bling!!!!
However, I wanted to start out right by checking the md5 with gtkhash.
I know gtkhash is installed in Saluki.
But:
I do not see it in the control panel.
I don't see it in "run a program".
I don't see it on any of the regular menus.
I don't see it on right click when I click on the iso.
When I search for gtkhash, I find it. ,
But none of the files will start the program.
Could someone please take me by the hand and show me how, or where, or what to do,
or tell me another way to check the md5 that is not tooo geeky?
Many thanks for your patience.
Pet
- Attachments
-
- Screenshot.png
- (28.68 KiB) Downloaded 851 times
tried to upgrade from 018 to 019 and also tried a fresh install by wiping my drive, but something does not load on boot and i cannot automatically log in. Saluki is the only OS on my laptop. md5sum of 019 was OK.
After the install, all is well and the desktop runs as normal, but when I reboot I am taken to a screen that says automatic login, etc but I am at #. When I type startxfce4 it takes me to the desktop but the screen freezes. Possibly my older hardware, ThinkPad R51 ?
After the install, all is well and the desktop runs as normal, but when I reboot I am taken to a screen that says automatic login, etc but I am at #. When I type startxfce4 it takes me to the desktop but the screen freezes. Possibly my older hardware, ThinkPad R51 ?
Geoffrey,
thank you for the picture. Under the 4th tab, I could have missed that.
Humm, something IS wrong. When I press properties,
This is what I get this instead.
I wonder why mine is different.
Pete.
thank you for the picture. Under the 4th tab, I could have missed that.
Humm, something IS wrong. When I press properties,
This is what I get this instead.
I wonder why mine is different.
Pete.
- Attachments
-
- Properties for 19.png
- (53.53 KiB) Downloaded 800 times
I'm not sure why you are getting dumped to the console, but the proper command is 'xwin' not 'startxfce4'.NZCyrus wrote:tried to upgrade from 018 to 019 and also tried a fresh install by wiping my drive, but something does not load on boot and i cannot automatically log in. Saluki is the only OS on my laptop. md5sum of 019 was OK.
After the install, all is well and the desktop runs as normal, but when I reboot I am taken to a screen that says automatic login, etc but I am at #. When I type startxfce4 it takes me to the desktop but the screen freezes. Possibly my older hardware, ThinkPad R51 ?
Hmm, no one has mentioned pgrps since I got rid of the connect icon in like saluki-004. It must not be terribly popular.Karl Godt wrote:Really nice experience so far .
Many many new things to explore like adrv.sfs ...
Whow !
One thing for pgprs-setup :
Without the standard connect button not easy to find
[Don't actually know why it is hidden and pupdial so much propagated .]
Funny theme and a stylish background fitting to that , I like it .
Woof is apparently not the newest, pgprs-setup is missing the gettext's
This is some code to add a PUK line to pgprs-setup :
This is to filter devices not attached to modems ie USB to SERIAL adapters :Code: Select all
> RGPIN="AT+CPIN="$PIN"" > if [ "`echo "$PIN" |grep ','`" ];then > PUK=`echo "$PIN" |cut -f1 -d','` > PIN=`echo "$PIN" |cut -f1 -d','` > sed -i "s/$RGPIN/AT+CPIN="$PIN"" /etc/ppp/peers/pgprs-connect-chatmm > fi > [ "$PUK" ] || PUK="""" 77a78
Code: Select all
> DMESG=`dmesg` 81c82 < for DEVICE in /dev/ttyUSB0 /dev/usb/ttyUSB0 /dev/ircomm0 /dev/ttyUB0 /dev/rfcomm0 /dev/ttyS0 --- > for DEVICE in /dev/ttyUSB0 /dev/ttyUSB1 /dev/usb/ttyUSB0 /dev/ircomm0 /dev/ttyUB0 /dev/rfcomm0 /dev/ttyS0 85a87 > if [ "`echo "$DMESG" |grep "${DEVICE##*/}" |grep -i -E 'GSM|modem'`" ];then 87a90 > fi
>Code: Select all
> <text tooltip-text="Only needed if need to unlock SIM card"> > <label>Phone PUK:</label> > </text> > <entry> > <default>${PUK}</default> > <variable>PUK</variable> > </entry> > </hbox>
> <hbox>
164c178
and this is to stop the pupmessage always popping up :Code: Select all
> if [ ! "$PUK" ];then 209a225,227 > else > wordreplace /etc/ppp/peers/gprs-connect-chatmm "$RGPIN" "AT+CPIN="${PUK},${PIN}"" > fi 211c229,233
*Code: Select all
< xmessage -center -title "$(gettext 'PGPRS SETUP')" "$(gettext "Connect to the Internet using 'PGPRS Connect' in the 'Network' menu.")" --- > if [ -f "`which pgprs-shell`" ];then > if [ -x "`which pgprs-shell`" ];then > chmod a-x "`which pgprs-shell`" > xmessage -center -title "PGPRS SETUP" "Connect to the Internet using 'PGPRS Connect' in the 'Network' menu." > fi;fi
One problem with pupdial seems to be the entry
"ABORT ERROR"
in /etc/ppp/chat-script .
Unblocking the SIM and failing to connect mostly works at second attempt, but unblocking the SIM a second time always gives ERROR and the connection can only be tried again if the eeepc internal modem is reset by reboot,poweroff or suspend (to ram) . pgprs-connect also shows the ERROR message but has no "ABORT ERROR" in /etc/ppp/peers/gprs-connect-chatmmm .
*
Saluki performance overall is little slower but vacation for the mind !
Great piece of work , jemimah !
*
[by the way anyone knows how the trash bin can be placed outside the desktop ?]
Saluki is synced with Racy 5.2. I will try to sync it with 5.3 for the second release, but it's going to be a pain since everything is so different now my patches need to be applied manually.
If you make your patches with 'diff -u' it's easier for me to figure out. Better yet, send me the whole patched script and I'll add it to the next release.
There's a trashbin for the panel. Then you can turn of the desktop trash in the desktop settings.
Oohhh, I see. Finally found in thunar!
Even more interesting.
The MD5 did not match. So I am glad I persisted.
I will download it again.
On gtkhash, it showed me the number,
but I had to manually check it with the md5.txt.
I thought if the md5.txt file was in the same directory,
it would automatically check it for me.
Is that wrong?
Pete
Even more interesting.
The MD5 did not match. So I am glad I persisted.
I will download it again.
On gtkhash, it showed me the number,
but I had to manually check it with the md5.txt.
I thought if the md5.txt file was in the same directory,
it would automatically check it for me.
Is that wrong?
Pete
Deleted savefile so fresh frugal install of 019. No problems to speak of.Looking good......
# report-video
Saluki, version 019 on Sat 14 Apr 2012
Chip description:
0.0 VGA compatible controller
nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
oem: NVidia
product: NV18 () Board Chip Rev A2
X Server: Xorg
Driver used: nouveau
X.Org version: 1.11.0
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
# report-video
Saluki, version 019 on Sat 14 Apr 2012
Chip description:
0.0 VGA compatible controller
nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
oem: NVidia
product: NV18 () Board Chip Rev A2
X Server: Xorg
Driver used: nouveau
X.Org version: 1.11.0
dimensions: 1440x900 pixels (380x238 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
Hi Jemimah / Pemasupemasu wrote:Dont forget kernel source sfs from the first page so...that you can compile kernel module drivers also....
I think the kernel sources link has gone missing from the front page.....is it k3.2.8-preemptive-fixed-aufs of 12 March?? There are other earlier k3.2.8-preemptives still there....
Thanks
peebee
Last edited by peebee on Sun 15 Apr 2012, 08:02, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
I can only guess which kernel Jemimah used...but the latest one is in this folder:
http://www.smokey01.com/pemasu/Saluki/k ... ixed-aufs/
Oh yes...and for pae kernel:
http://www.smokey01.com/pemasu/Saluki/k ... .2.13-pae/
http://www.smokey01.com/pemasu/Saluki/k ... ixed-aufs/
Oh yes...and for pae kernel:
http://www.smokey01.com/pemasu/Saluki/k ... .2.13-pae/
10alsa
I think the /etc/init.d/10alsa on Saluki-19 is outdated.DaveS wrote:BUG, 19, frugal install. Sound re-sets to default setting at re-boot, personalised settings are not persistent.
The woof-120226 has recent one, but i have another which is based on the Japanese versions.
Code: Select all
# 7dec2011 shinobar: wait loading modules, conditional saving asound.state (merged form the Quickset Wary, wary-511-01q)
#111210 shinobar: refresh asound.state at restart
#120103 karl godt: fix unloading modules. refer: http://www.murga-linux.com/puppy/viewtopic.php?t=71767&start=390
#120222 revert 111229. 120223 shinobar: better fix.
#120226 01micko: added 'Master Front' entries. 120318 bumped it up, 75% to 100%.
- Attachments
-
- 10alsa-shinobar.gz
- extract, rename, add excutable, and place at /etc/init.d/10alsa
- (1.81 KiB) Downloaded 241 times
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Partition alphabetical order is not right in Saluki...which is not so apparent due to missing drive icons.
But I believe the /sbin/probepart is about same in Saluki since I use Jemimah's patched version.
http://murga-linux.com/puppy/viewtopic. ... 159#620159
But I believe the /sbin/probepart is about same in Saluki since I use Jemimah's patched version.
http://murga-linux.com/puppy/viewtopic. ... 159#620159
- shelezyaka
- Posts: 52
- Joined: Tue 14 Feb 2012, 13:57
- Location: Ukrainian
Kernel sources are in the repo.peebee wrote:Hi Jemimah / Pemasupemasu wrote:Dont forget kernel source sfs from the first page so...that you can compile kernel module drivers also....
I think the kernel sources link has gone missing from the front page.....is it k3.2.8-preemptive-fixed-aufs of 12 March?? There are other earlier k3.2.8-preemptives still there....
Thanks
peebee
You can try booting without vga=0x311 and see if that sorts it.Sage wrote:More grief with SiS chipsets. Now getting picture at wrong res. at boot-up, but the CLI is black screen, whether nox or CTRL-ALt-BKSPCE. Everything else, old & new - no issues. There is an answer to the SiS conundrum, not know to YT; probably ask micko, PD, pem. or shin.