Dpup Exprimo 5.X.3.4.12 with 3.4.2 kernel.
DC. Kernel 3.4.2 has initial support for your stick....in /lib/modules/3.4.2-dpup/kernel/drivers/media/dvb/dvb-usb/dvb-usb-rtl28xxu.ko
Have you plugged in your stick and tested. And check the dmesg in console after that. Or try modprobe dvb-usb-rtl28xxu and test again.
I couldnt find recent patch for your stick.
/usr/src/linux/drivers/media/dvb/dvb-usb/rtl28xxu.c mentions rtl2832u several times.
If that support does not work for you, I could try to hunt recent ready patch for 3.4.2 kernel.
About kernel headers. They are included in devx sfs in Puppies. In dpups also. When you compile kernel modules...I would recommend to use devx sfs of the build. The other devx sfs usually works for applications. I mean same puplet but older kernel version usually works. Debian packages their kernel totally differently than Puppies. So...the ready kernel patching kits from debian ubuntu or squeeze does not work.
Charlie6. Yeah...it seems to need that libcurl-gnutls.so.4. libcurl3-gnutls deb from PPM debian squeeze repo installs that lib. I must have had that lib due to my compiling already.
Have you plugged in your stick and tested. And check the dmesg in console after that. Or try modprobe dvb-usb-rtl28xxu and test again.
I couldnt find recent patch for your stick.
/usr/src/linux/drivers/media/dvb/dvb-usb/rtl28xxu.c mentions rtl2832u several times.
If that support does not work for you, I could try to hunt recent ready patch for 3.4.2 kernel.
About kernel headers. They are included in devx sfs in Puppies. In dpups also. When you compile kernel modules...I would recommend to use devx sfs of the build. The other devx sfs usually works for applications. I mean same puplet but older kernel version usually works. Debian packages their kernel totally differently than Puppies. So...the ready kernel patching kits from debian ubuntu or squeeze does not work.
Charlie6. Yeah...it seems to need that libcurl-gnutls.so.4. libcurl3-gnutls deb from PPM debian squeeze repo installs that lib. I must have had that lib due to my compiling already.
RTL2832U
Hi pemasu,
RTL2832U Not working. Here's the results
As a benchmark, puppy 528 which uses the module I compiled
#Twinhan
dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
dvb-usb: will use the device's hardware PID filter (table count: 16).
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
#Sandberg
dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_rtl2832u
#squeeze-5_X_3_4_2_1-SCSI results
# modprobe dvb-usb-rtl28xxu
# dmesg | grep dvb
[ 496.418342] usbcore: registered new interface driver dvb_usb_rtl28xxu
#Sandberg
unplug and replug RTL2832U - no reaction at all
# Twinhan
[ 663.068566] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try to load a firmware
[ 663.071792] dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw'
[ 664.064746] usbcore: registered new interface driver dvb_usb_dibusb_mb
[ 664.066565] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 666.220826] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
[ 666.239425] dvb-usb: will use the device's hardware PID filter (table count: 16).
[ 666.287783] dvb-usb: schedule remote query interval to 150 msecs.
[ 666.302608] dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
Whats the criteria for finding kernel headers /patches. As I want to get this usb-dvb working under Fatdog as well.
One other point relating to sqeeze trying to resize windows you have to be very accurate with your mouse pointer. Is there a setting to make the grab area wider/thicker?
thanks
DC
RTL2832U Not working. Here's the results
As a benchmark, puppy 528 which uses the module I compiled
#Twinhan
dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
dvb-usb: will use the device's hardware PID filter (table count: 16).
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
#Sandberg
dvb-usb: found a 'RTL2832U DVB-T USB DEVICE' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
dvb-usb: RTL2832U DVB-T USB DEVICE successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_rtl2832u
#squeeze-5_X_3_4_2_1-SCSI results
# modprobe dvb-usb-rtl28xxu
# dmesg | grep dvb
[ 496.418342] usbcore: registered new interface driver dvb_usb_rtl28xxu
#Sandberg
unplug and replug RTL2832U - no reaction at all
# Twinhan
[ 663.068566] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in cold state, will try to load a firmware
[ 663.071792] dvb-usb: downloading firmware from file 'dvb-usb-dibusb-5.0.0.11.fw'
[ 664.064746] usbcore: registered new interface driver dvb_usb_dibusb_mb
[ 664.066565] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
[ 666.220826] dvb-usb: found a 'TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device' in warm state.
[ 666.239425] dvb-usb: will use the device's hardware PID filter (table count: 16).
[ 666.287783] dvb-usb: schedule remote query interval to 150 msecs.
[ 666.302608] dvb-usb: TwinhanDTV USB-Ter USB1.1 / Magic Box I / HAMA USB1.1 DVB-T device successfully initialized and connected.
Whats the criteria for finding kernel headers /patches. As I want to get this usb-dvb working under Fatdog as well.
One other point relating to sqeeze trying to resize windows you have to be very accurate with your mouse pointer. Is there a setting to make the grab area wider/thicker?
thanks
DC
a little bit of knowledge and I'm dangerous
I have compiled mscore-1.2. It needs qt libs from exprimo repo also.
http://musescore.org/
http://smokey01.com/pemasu/pet_packages ... re-1.2.pet
http://smokey01.com/pemasu/pet_packages ... LS-1.2.pet
http://smokey01.com/pemasu/pet_packages ... OC-1.2.pet
I have also packaged Adobe Acrobat reader-9.5.1 and FoxitReader-1.1
http://smokey01.com/pemasu/pet_packages ... -9.5.1.pet
http://smokey01.com/pemasu/pet_packages ... -9.5.1.sfs
http://smokey01.com/pemasu/pet_packages ... 1-dpup.pet
http://musescore.org/
http://smokey01.com/pemasu/pet_packages ... re-1.2.pet
http://smokey01.com/pemasu/pet_packages ... LS-1.2.pet
http://smokey01.com/pemasu/pet_packages ... OC-1.2.pet
I have also packaged Adobe Acrobat reader-9.5.1 and FoxitReader-1.1
http://smokey01.com/pemasu/pet_packages ... -9.5.1.pet
http://smokey01.com/pemasu/pet_packages ... -9.5.1.sfs
http://smokey01.com/pemasu/pet_packages ... 1-dpup.pet
DC. I am checking the rtl2832u patches.
About JWM window thichkness. Yeah...I have reduced it to too narrow. In /root/.jwm/themes....check the jwmrc files of the themes. In there is the tag: <Width>3</Width>
Change it for example to whatever number you want. From 1 or 3 to 5 or 8. From 8 the resizing by dragging is easy, lol.
About JWM window thichkness. Yeah...I have reduced it to too narrow. In /root/.jwm/themes....check the jwmrc files of the themes. In there is the tag: <Width>3</Width>
Change it for example to whatever number you want. From 1 or 3 to 5 or 8. From 8 the resizing by dragging is easy, lol.
- OscarTalks
- Posts: 2196
- Joined: Mon 06 Feb 2012, 00:58
- Location: London, England
Hello Pemasu / Billtoo / Anyone else,
I would be curious to know if this video stream plays in your new VLC 2.0.1
http://173.193.48.140:8080;stream.nsv
It is just the one from the button "Shoutcast Movie" in Pupradio/Puptelly but it is in fact "Old Fashioned TV".
I have found that in some VLC versions in Puppy I get video but no audio and I was wondering if this is something in the way it was compiled or if it is something which needs to be altered in the (rather large) preferences like a demuxer setting perhaps?
I would be curious to know if this video stream plays in your new VLC 2.0.1
http://173.193.48.140:8080;stream.nsv
It is just the one from the button "Shoutcast Movie" in Pupradio/Puptelly but it is in fact "Old Fashioned TV".
I have found that in some VLC versions in Puppy I get video but no audio and I was wondering if this is something in the way it was compiled or if it is something which needs to be altered in the (rather large) preferences like a demuxer setting perhaps?
Oscar in England
@ OscarTalks:
edit:
My apologies.
I forgot I was using vlc 2.0.1 on fatdog600 when I posted this reply but it may help to know it works on 2.0.1.
I have it playing on vlc 2.0.1as I post this. Just copied address from the clipboard.
irishrm.
edit 2:
As Billtoo confirms no sound (didn't check)
edit:
My apologies.
I forgot I was using vlc 2.0.1 on fatdog600 when I posted this reply but it may help to know it works on 2.0.1.
I have it playing on vlc 2.0.1as I post this. Just copied address from the clipboard.
irishrm.
edit 2:
As Billtoo confirms no sound (didn't check)
Last edited by irishrm on Sat 30 Jun 2012, 17:09, edited 1 time in total.
It plays but no sound in vlc-2.0.1 dpup and fatdog, it plays with soundOscarTalks wrote:Hello Pemasu / Billtoo / Anyone else,
I would be curious to know if this video stream plays in your new VLC 2.0.1
http://173.193.48.140:8080;stream.nsv
It is just the one from the button "Shoutcast Movie" in Pupradio/Puptelly but it is in fact "Old Fashioned TV".
I have found that in some VLC versions in Puppy I get video but no audio and I was wondering if this is something in the way it was compiled or if it is something which needs to be altered in the (rather large) preferences like a demuxer setting perhaps?
in ubuntu 12.04 running in virtualbox in slacko 533.
EDIT: umplayer plays that link with sound in fatdog, I haven't tried the dpup version of umplayer.
- Attachments
-
- nsv.jpg
- (79.88 KiB) Downloaded 886 times
-
- vlcscrnvb.jpg
- (116.82 KiB) Downloaded 1260 times
Last edited by Billtoo on Mon 02 Jul 2012, 23:46, edited 1 time in total.
Another frugal install on my Xubuntu/Zenwalk/AntiX/Puppy box. Actually used the installer this time.
No problems so far, everything appears to be working correctly.
# report-video
Dpup Exprimo, version 5.X.3.4.2.2 on Sat 30 Jun 2012
Chip description:
2.0 VGA compatible controller
Intel Corporation 82865G Integrated Graphics Controller (rev 02)
oem: Intel(r)865G Graphics Chip Accelerated VGA BIOS
product: Intel(r)865G Graphics Controller Hardware Version 0.0
X Server: Xorg
Driver used: is
X.Org version: 1.7.7
dimensions: 1024x768 pixels (270x203 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 512MB (199MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Sat 30 Jun 2012 12:59:05 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH4 - Intel ICH5
# free
total used free shared buffers
Mem: 512332 494204 18128 0 35268
-/+ buffers: 458936 53396
Swap: 1124512 3332 1121180
#
No problems so far, everything appears to be working correctly.
# report-video
Dpup Exprimo, version 5.X.3.4.2.2 on Sat 30 Jun 2012
Chip description:
2.0 VGA compatible controller
Intel Corporation 82865G Integrated Graphics Controller (rev 02)
oem: Intel(r)865G Graphics Chip Accelerated VGA BIOS
product: Intel(r)865G Graphics Controller Hardware Version 0.0
X Server: Xorg
Driver used: is
X.Org version: 1.7.7
dimensions: 1024x768 pixels (270x203 millimeters)
depth of root window: 24 planes
...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
#
-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.80GHz
Memory : 512MB (199MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Sat 30 Jun 2012 12:59:05 PM CDT
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Unknown
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH4 - Intel ICH5
# free
total used free shared buffers
Mem: 512332 494204 18128 0 35268
-/+ buffers: 458936 53396
Swap: 1124512 3332 1121180
#
DC. I have test compiled rtl2830.ko using this link to download latest v4l git and compiling the modules.
http://www.linuxtv.org/wiki/index.php/H ... ce_Drivers
I included the core recompiled v4l modules also, not sure if they are needed, maybe just the rtl2830.ko would have needed, or...it wont work at all.
Install the pet, it has depmod in pinstall.sh script included.
http://www.linuxtv.org/wiki/index.php/H ... ce_Drivers
I included the core recompiled v4l modules also, not sure if they are needed, maybe just the rtl2830.ko would have needed, or...it wont work at all.
Install the pet, it has depmod in pinstall.sh script included.
- Attachments
-
- rtl283x-driver.pet
- (101.05 KiB) Downloaded 287 times
Now you have possiblity to stress your machine to the end...or notice that your comp is in good shape.
StressItOut-0.1.... My comp is still alive.
http://qt-apps.org/content/show.php/Str ... ent=136985
This app needs the qt libs with opengl support:
http://smokey01.com/pemasu/pet_packages ... l-dpup.pet
http://smokey01.com/pemasu/pet_packages ... l-dpup.sfs
StressItOut-0.1.... My comp is still alive.
http://qt-apps.org/content/show.php/Str ... ent=136985
This app needs the qt libs with opengl support:
http://smokey01.com/pemasu/pet_packages ... l-dpup.pet
http://smokey01.com/pemasu/pet_packages ... l-dpup.sfs
- Attachments
-
- stressitout-0.1.pet
- (139.94 KiB) Downloaded 252 times
rtl2830.ko
Hi pemasu,
The bad news and the further bad news
rtl2832u still ignored.
And the twinhan is now broken with the following
DC
The bad news and the further bad news
rtl2832u still ignored.
And the twinhan is now broken with the following
thanks# dmesg | grep dvb
[ 13.600854] dvb_usb: disagrees about version of symbol dvb_dmxdev_init
[ 13.600856] dvb_usb: Unknown symbol dvb_dmxdev_init (err -22)
[ 13.600868] dvb_usb: disagrees about version of symbol dvb_register_adapter
[ 13.600870] dvb_usb: Unknown symbol dvb_register_adapter (err -22)
[ 13.600890] dvb_usb: disagrees about version of symbol dvb_net_init
[ 13.600892] dvb_usb: Unknown symbol dvb_net_init (err -22)
[ 13.600897] dvb_usb: disagrees about version of symbol dvb_dmxdev_release
[ 13.600898] dvb_usb: Unknown symbol dvb_dmxdev_release (err -22)
[ 13.600903] dvb_usb: disagrees about version of symbol dvb_frontend_detach
[ 13.600904] dvb_usb: Unknown symbol dvb_frontend_detach (err -22)
[ 13.600911] dvb_usb: disagrees about version of symbol dvb_net_release
[ 13.600913] dvb_usb: Unknown symbol dvb_net_release (err -22)
[ 13.600917] dvb_usb: disagrees about version of symbol dvb_unregister_frontend
[ 13.600919] dvb_usb: Unknown symbol dvb_unregister_frontend (err -22)
[ 13.600922] dvb_usb: disagrees about version of symbol dvb_register_frontend
[ 13.600924] dvb_usb: Unknown symbol dvb_register_frontend (err -22)
[ 13.600927] dvb_usb: disagrees about version of symbol dvb_unregister_adapter
[ 13.600928] dvb_usb: Unknown symbol dvb_unregister_adapter (err -22)
DC
a little bit of knowledge and I'm dangerous
Sorry about bad news. It was my first trial with that v4l git. I suppose it would need the whole set of those modules.
Anyway...Uninstall the pet...remove this folder with subfolders: /lib/modules/3.4.2-dpup/kernel/drivers/media
And then you can copy folder back from: /initrd/pup_ro2/lib/modules/3.4.2-dpup/kernel/drivers/media. As you know, with frugal install you have always backup in hands.
I think I let this be now. It might be possible to test with whole v4l but I will test it first with my own dvb tuner....maybe later...
Anyway...Uninstall the pet...remove this folder with subfolders: /lib/modules/3.4.2-dpup/kernel/drivers/media
And then you can copy folder back from: /initrd/pup_ro2/lib/modules/3.4.2-dpup/kernel/drivers/media. As you know, with frugal install you have always backup in hands.
I think I let this be now. It might be possible to test with whole v4l but I will test it first with my own dvb tuner....maybe later...
I posted in a dpup thread a while back how /root/.bashrc was ignored when LXTerminal was installed.
I know Pemasu solved it a different way, but I wanted to add this here for future reference.
http://www.murga-linux.com/puppy/viewtopic.php?t=12814
So basically, all I did in Slacko to get .bashrc to run automatically, was to uncomment the line in /etc/profile that says #export ENV="/root/.bashrc". It worked after my computer rebooted, and this method will very likely apply to other puppies as well.
The line below it says:
#...no, instead have exported SHELL=bash, see above.
That has me a little worried, as I didn't change the shell to SHELL="/bin/sh", but everything seems to be working normally so far.
@Pemasu. I am using Slacko now, but I plan to switch over to Upup Precise, once it's finished. ( Newer Gcc and libs ).
I know Pemasu solved it a different way, but I wanted to add this here for future reference.
http://www.murga-linux.com/puppy/viewtopic.php?t=12814
So basically, all I did in Slacko to get .bashrc to run automatically, was to uncomment the line in /etc/profile that says #export ENV="/root/.bashrc". It worked after my computer rebooted, and this method will very likely apply to other puppies as well.
The line below it says:
#...no, instead have exported SHELL=bash, see above.
That has me a little worried, as I didn't change the shell to SHELL="/bin/sh", but everything seems to be working normally so far.
@Pemasu. I am using Slacko now, but I plan to switch over to Upup Precise, once it's finished. ( Newer Gcc and libs ).
pnethood problem
Hi pemasu
I'm getting errors from pnethood on 5.x.3.4.2.2 - finds my share OK but won't allow me to connect:
Cheers
peebee
I'm getting errors from pnethood on 5.x.3.4.2.2 - finds my share OK but won't allow me to connect:
Code: Select all
# pnethood
Found gtkdialog-0.8.1
cifs mounting enabled
192.168.0.0/16
/usr/local/apps/pnethood/pnethood: line 659: 1078 Terminated "$GTKDIALOG" --program=MSG_SCANNING_NETWORK --center
/usr/local/apps/pnethood/pnethood: line 1: 1137 Terminated "$GTKDIALOG" --program=MSG_SCANNING_MACHINE --center
/usr/local/apps/pnethood/func_mount: line 67: --program=MAIN_DIALOG: command not found
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
pemasu,
I'm not sure if you still include Tempicon by default, but if you do, use the latest 0.11. It is compatible with new2dir now, also a sample woof compatible pinstall.sh is included in one of the source dirs.
Cheers
I'm not sure if you still include Tempicon by default, but if you do, use the latest 0.11. It is compatible with new2dir now, also a sample woof compatible pinstall.sh is included in one of the source dirs.
Cheers
Puppy Linux Blog - contact me for access
Re: pnethood problem
expot GTKDIALOG solves the error message:peebee wrote:/usr/local/apps/pnethood/func_mount: line 67: --program=MAIN_DIALOG: command not found
But anyway, your network may have trouble by another reason./usr/local/apps/pnethood/pnethood at around line 93 wrote:###Check for gtkdialog #20jun2012 export
export GTKDIALOG=""
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Re: pnethood problem
Hi shino - network is fine under other puppies............shinobar wrote:But anyway, your network may have trouble by another reason.
Thanks
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Gnuxo. Libc deb is part of the glibc woof package. Glibc is the most fundamental part of the distro. Updating the whole glibc framework surely has side effects.
Here is post by Barry Kauler and follow posts about updating glibc:
http://bkhome.org/blog/?viewDetailed=02372
I suppose you are on your own if you start to update it.
01micko. Thanks. Yes...I have tempicon as preinstalled and I have updated it now.
Peebee-Shinobar. I am now in summer house and using 3g modem connection. I dont have active network interface now so I cant test the pnethood. But....I have Shinobar`s updated version:
Thanks again to everyone of the feedback.
Here is post by Barry Kauler and follow posts about updating glibc:
http://bkhome.org/blog/?viewDetailed=02372
I suppose you are on your own if you start to update it.
01micko. Thanks. Yes...I have tempicon as preinstalled and I have updated it now.
Peebee-Shinobar. I am now in summer house and using 3g modem connection. I dont have active network interface now so I cant test the pnethood. But....I have Shinobar`s updated version:
If I would need to update the pnethood script by above command, what is the exact row in that script. Or diff file is also okay for patching it. Whatever way is easiest for me to know.VERSION=0.6.8.9 #shinobar
Thanks again to everyone of the feedback.