Broadcom-STA "wl" wifi drivers
Delta file for Racy
The delta file for:
Racy 5.3 with Kernel 3.0.25
is attached
To install the Broadcom WL driver onto Racy 5.3
1. install rerwin_woof_fixes-delta-3f.pet in post #1 (n.b. not required for Racy 5.3.90)
2. install the delta file attached to this post
3. install the multi-kernel pet in post #1
4. reboot
Racy 5.3 with Kernel 3.0.25
is attached
To install the Broadcom WL driver onto Racy 5.3
1. install rerwin_woof_fixes-delta-3f.pet in post #1 (n.b. not required for Racy 5.3.90)
2. install the delta file attached to this post
3. install the multi-kernel pet in post #1
4. reboot
- Attachments
-
- broadcom_wl_delta-k3.0.25.pet
- Delta file for k3.0.25
- (41.53 KiB) Downloaded 1990 times
Last edited by peebee on Sat 29 Sep 2012, 11:57, edited 6 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Support for Saluki and Carolina
The delta files for:
Saluki 023 with Kernel 3.2.8-ski
and Lina-Lite with Kernel 3.2.13-c
and Carolina with Kernel 3.2.13-ski pae
are attached
To install the Broadcom WL driver onto Saluki 023 or Lina-Lite To install the Broadcom WL driver onto Carolina 003:
Saluki 023 with Kernel 3.2.8-ski
and Lina-Lite with Kernel 3.2.13-c
and Carolina with Kernel 3.2.13-ski pae
are attached
To install the Broadcom WL driver onto Saluki 023 or Lina-Lite To install the Broadcom WL driver onto Carolina 003:
- Attachments
-
- broadcom_wl_delta-k3.2.13-c.pet
- Delta file for k3.2.13-c
- (41.74 KiB) Downloaded 2125 times
-
- broadcom_wl_delta-k3.2.13-ski.pet
- Delta file for k3.2.13-ski
- (41.78 KiB) Downloaded 2235 times
-
- broadcom_wl_delta-k3.2.8-ski.pet
- Delta file for k3.2.8-ski
- (41.56 KiB) Downloaded 2079 times
Last edited by peebee on Fri 11 Jan 2013, 07:43, edited 19 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
- DutchPuppy
- Posts: 46
- Joined: Sun 14 Aug 2011, 15:47
- Location: Vlaardingen, South-West of Netherlands
WPC54G pcmcia adapter in Slacko 5.3.3
Hi Peebee,
Thanks for this post!
Today I upgraded from Slacko 5.3.1 to 5.3.3 on a Compaq Evo N600c with a Linksys WPC54g pcmcia adapter. In 5.3.1 it had always worked fine and i expected the same in 5.3.3 but it was not at first place.
At the first boot it was recognized, but after saving the 2fs file and a reboot, it did not work anymore and could not get recognized the adapter.
After reading this post and installed the B43 Version 5.100.143.3 pet, it worked, but i had to manually activate the connection every time.
Then tried frisbee and that worked. It does connects slower than previously in 5.3.1, but it does connect! Thanks again.
Thanks for this post!
Today I upgraded from Slacko 5.3.1 to 5.3.3 on a Compaq Evo N600c with a Linksys WPC54g pcmcia adapter. In 5.3.1 it had always worked fine and i expected the same in 5.3.3 but it was not at first place.
At the first boot it was recognized, but after saving the 2fs file and a reboot, it did not work anymore and could not get recognized the adapter.
After reading this post and installed the B43 Version 5.100.143.3 pet, it worked, but i had to manually activate the connection every time.
Then tried frisbee and that worked. It does connects slower than previously in 5.3.1, but it does connect! Thanks again.
Delta file for Precise Puppy 5.2.60
The delta files for:
Precise 5.2.60 k3.2.18 is attached (e.g. for MacPup 5.2.9 and also Precise-Mate)
To install the Broadcom WL driver onto Precise 5.2.60
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. install the delta file attached to this post (attachment #3 - make sure you select the right one)
3. install the multi-kernel pet in post #1
4. reboot
Precise 5.2.60 k3.2.18 is attached (e.g. for MacPup 5.2.9 and also Precise-Mate)
To install the Broadcom WL driver onto Precise 5.2.60
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. install the delta file attached to this post (attachment #3 - make sure you select the right one)
3. install the multi-kernel pet in post #1
4. reboot
- Attachments
-
- broadcom_wl_delta-k3.2.18.pet
- Delta file for k3.2.18 (e.g. for MacPup 5.2.9 based on Precise 5.2.60)
- (42.15 KiB) Downloaded 2152 times
Last edited by peebee on Wed 24 Oct 2012, 09:59, edited 14 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Delta files for oldyeller versions of Precise
The delta files for:
Ov-Precise-5.2.61 non-pae with Kernel 3.2.27_5.2.60
and Ov-Precise 5.3.0 with Kernel 3.2.27-upup
are attached
To install the Broadcom WL driver onto OvPrecise
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. install the delta file attached to this post (make sure you select the right one)
3. install the multi-kernel pet in post #1
4. reboot
Ov-Precise-5.2.61 non-pae with Kernel 3.2.27_5.2.60
and Ov-Precise 5.3.0 with Kernel 3.2.27-upup
are attached
To install the Broadcom WL driver onto OvPrecise
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. install the delta file attached to this post (make sure you select the right one)
3. install the multi-kernel pet in post #1
4. reboot
- Attachments
-
- broadcom_wl_delta-k3.2.27_5.2.60.pet
- Delta file for k3.2.27_5.2.60 - nonpae version
- (42.2 KiB) Downloaded 2086 times
-
- broadcom_wl_delta-k3.2.27-upup.pet
- Delta file for k3.2.27-upup - pae version
- (42.21 KiB) Downloaded 2075 times
Last edited by peebee on Fri 21 Sep 2012, 19:40, edited 7 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Delta file for Pemasu's version of Precise
Pemasu's Upup Precise 5.3.3.3 with Kernel 3.3.2-upup already includes the wl driver.
To update the Broadcom WL driver logic on Upup Precise:
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. reboot
To update the Broadcom WL driver logic on Upup Precise:
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. reboot
Last edited by peebee on Sat 22 Sep 2012, 08:44, edited 9 times in total.
New All-In-One multi-kernel version pet attached
A new pet that replaces all of the kernel specific pets for the 5.100 version of the driver with a single multi-kernel support version has been attached to post #1.
The way this has been implemented has been to include a base version of the driver and individual delta files that transform the base into the kernel specific version at install time. It is therefore dependent on xdelta3 being available (for saluki only you will need to install xdelta3 from the link given before installing the multi-pet). The un-needed delta files and the base driver are deleted after the kernel specific driver has been generated. The folder /opt/broadcom-sta is where all this happens.
It will be much easier to keep this single multi-kernel pet updated.
Cheers
peebee
The way this has been implemented has been to include a base version of the driver and individual delta files that transform the base into the kernel specific version at install time. It is therefore dependent on xdelta3 being available (for saluki only you will need to install xdelta3 from the link given before installing the multi-pet). The un-needed delta files and the base driver are deleted after the kernel specific driver has been generated. The folder /opt/broadcom-sta is where all this happens.
It will be much easier to keep this single multi-kernel pet updated.
Cheers
peebee
Last edited by peebee on Sat 25 Aug 2012, 10:16, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Delta file for Mage2
The delta file for:
Mage2 1.9.95 with Kernel 3.3.8-mage2-p64gsw-i586
is attached
To install the Broadcom WL driver onto Mage2
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. install the delta file attached to this post
3. install the multi-kernel pet in post #1
4. reboot
Mage2 1.9.95 with Kernel 3.3.8-mage2-p64gsw-i586
is attached
To install the Broadcom WL driver onto Mage2
1. install rerwin_woof_fixes-delta-3f.pet in post #1
2. install the delta file attached to this post
3. install the multi-kernel pet in post #1
4. reboot
- Attachments
-
- broadcom_wl_delta-k3.3.8-mage2-p64gsw-i586.pet
- Delta file for k3.3.8-mage2-p64gsw-i586
- (42.52 KiB) Downloaded 2097 times
Last edited by peebee on Fri 21 Sep 2012, 19:42, edited 8 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Wary & Racy 5.3.90 - 5.4 Betas
BarryK has released the beta versions of Wary and Racy 5.4
These versions have rerwin's new pup_event_backend_modprobe with extended preference processing built-in from woof.
To load the Broadcom wl driver onto Wary 5.3.92:
These versions have rerwin's new pup_event_backend_modprobe with extended preference processing built-in from woof.
To load the Broadcom wl driver onto Wary 5.3.92:
- 1. load the multi-kernel pet from post #1
Last edited by peebee on Wed 05 Dec 2012, 07:32, edited 6 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Diffs record
As a record.....
Open the attached file as text to see all the changes made to the original Broadcom sources.
Cheers
peebee
Open the attached file as text to see all the changes made to the original Broadcom sources.
Cheers
peebee
- Attachments
-
- wl_diffs.gz
- (2.35 KiB) Downloaded 1567 times
Last edited by peebee on Mon 17 Sep 2012, 18:23, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Delta files for Precise Puppy
Delta files are no longer required for Precise 5.4 - they are now built in to the multi-kernel pet
Last edited by peebee on Wed 24 Oct 2012, 10:02, edited 10 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Reserved for future use
Last edited by peebee on Fri 05 Oct 2012, 20:25, edited 9 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Reserved for future use
Last edited by peebee on Wed 03 Oct 2012, 18:19, edited 2 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Delta files for Slacko 5.3.7.1 k3.2.33-4g & k3.4.17-PAE
The delta files for the Beta version of the next version of Slacko:
This is another "new generation" pup that does NOT need the rerwin fixes pet.
To install the Broadcom WL driver onto Slacko 5.3.7.1
- Slacko 5.3.7.1 with Kernel 3.2.33-4g and with Kernel 3.4.17-PAE
This is another "new generation" pup that does NOT need the rerwin fixes pet.
To install the Broadcom WL driver onto Slacko 5.3.7.1
- 1. install the (correct!) delta file attached to this post
2. install the multi-kernel pet in post #1
3. reboot
- Attachments
-
- broadcom_wl_delta-k3.2.33-4g.pet
- WL Delta for k3.2.33-4g
- (42.26 KiB) Downloaded 1597 times
-
- broadcom_wl_delta-k3.4.17-PAE.pet
- WL Delta for k3.4.17-PAE
- (42.4 KiB) Downloaded 1614 times
Last edited by peebee on Wed 07 Nov 2012, 09:08, edited 12 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
New version uploaded
Version 9 uploaded on 25 Aug 2012 - from download 343 onwards - see post #1.
For this version I have taken most of the delta files out of the Multi-Kernel pet and provided them individually as posts to the thread - the main pet still directly supports the official release puppies Wary and Slacko.
As before, there are no changes to the actual driver from this change so if you've downloaded and are using a previous version you can stick with it.
Cheers
peebee
For this version I have taken most of the delta files out of the Multi-Kernel pet and provided them individually as posts to the thread - the main pet still directly supports the official release puppies Wary and Slacko.
As before, there are no changes to the actual driver from this change so if you've downloaded and are using a previous version you can stick with it.
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Precise 5.2.72 & 73 delta added
I've added the delta file to support Precise 5.2.72 & 5.2.91 k3.2.28-pae as just released by BarryK - see http://murga-linux.com/puppy/viewtopic. ... 5&start=10
Last edited by peebee on Wed 05 Sep 2012, 09:00, edited 1 time in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Reserved for future use
Last edited by peebee on Wed 03 Oct 2012, 18:20, edited 2 times in total.
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
The delta file for the next Slacko 5.3.5.3 with k3.2.28-4g has been uploaded:
http://murga-linux.com/puppy/viewtopic. ... 5&start=20
Cheers
peebee
http://murga-linux.com/puppy/viewtopic. ... 5&start=20
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Hi Peebee,
I just wanted to ask you if I compile the newer STA drivers,
and install the pet, will it overwrite the older wl driver, or do I have to somehow remove the older wl driver?
Also, I will be compiling for Solidpup (Wary 5.1.1 kernel 2.26.32.28 )
Will I need any special patches for the older kernel?
Great work with the drivers.
I just wanted to ask you if I compile the newer STA drivers,
and install the pet, will it overwrite the older wl driver, or do I have to somehow remove the older wl driver?
Also, I will be compiling for Solidpup (Wary 5.1.1 kernel 2.26.32.28 )
Will I need any special patches for the older kernel?
Great work with the drivers.