Broadcom-STA "wl" wifi drivers
Try on Precise 5.7.1. PAE:dsj wrote:Linux Mint is using Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.233.141.
wl: module license 'MIXED/Proprietery' taints kernel.
Disabling lock debugging due to kernel taint
I am using Puppy Precise 5.6.1 PAE.
Broadcom STA 6.30.223.141 pet for Precise 5.7.1 PAE k3.9.11
also available:
Broadcom STA 6.30.223.141 pet for Quirky-Tahr6 k3.12.6
also
Broadcom STA 6.30.223.141 pet for Slacko 5.6.5.6 k3.4.78-4g (shouldn't be needed once Slacko 5.7 reaches release
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Using Puppy Precise 5.7.1 & load the provided Pet file for Broadcom, I get the following error messages in dmesg
222.348342] lib80211: common routines for IEEE802.11 drivers
[ 222.348623] lib80211_crypt: registered algorithm 'NULL'
[ 222.352076] wl: module license 'MIXED/Proprietary' taints kernel.
[ 222.352080] Disabling lock debugging due to kernel taint
[ 222.354381] wl: Unknown symbol cfg80211_scan_done (err 0)
[ 222.354430] wl: Unknown symbol cfg80211_disconnected (err 0)
[ 222.354465] wl: Unknown symbol wiphy_register (err 0)
[ 222.354480] wl: Unknown symbol wiphy_new (err 0)
[ 222.354492] wl: Unknown symbol cfg80211_put_bss (err 0)
[ 222.354503] wl: Unknown symbol cfg80211_roamed (err 0)
[ 222.354514] wl: Unknown symbol cfg80211_inform_bss (err 0)
[ 222.354538] wl: Unknown symbol cfg80211_ibss_joined (err 0)
[ 222.354557] wl: Unknown symbol cfg80211_michael_mic_failure (err 0)
[ 222.354569] wl: Unknown symbol cfg80211_connect_result (err 0)
[ 222.354592] wl: Unknown symbol wiphy_unregister (err 0)
[ 222.354608] wl: Unknown symbol cfg80211_get_bss (err 0)
[ 222.354624] wl: Unknown symbol __ieee80211_get_channel (err 0)
[ 222.354653] wl: Unknown symbol ieee80211_channel_to_frequency (err 0)
[ 222.354674] wl: Unknown symbol cfg80211_inform_bss_frame (err 0)
[ 222.354690] wl: Unknown symbol ieee80211_frequency_to_channel (err 0)
[ 222.354708] wl: Unknown symbol wiphy_free (err 0)
[ 299.896188] mce: [Hardware Error]: Machine check events logged
& the wl driver is unloaded.
222.348342] lib80211: common routines for IEEE802.11 drivers
[ 222.348623] lib80211_crypt: registered algorithm 'NULL'
[ 222.352076] wl: module license 'MIXED/Proprietary' taints kernel.
[ 222.352080] Disabling lock debugging due to kernel taint
[ 222.354381] wl: Unknown symbol cfg80211_scan_done (err 0)
[ 222.354430] wl: Unknown symbol cfg80211_disconnected (err 0)
[ 222.354465] wl: Unknown symbol wiphy_register (err 0)
[ 222.354480] wl: Unknown symbol wiphy_new (err 0)
[ 222.354492] wl: Unknown symbol cfg80211_put_bss (err 0)
[ 222.354503] wl: Unknown symbol cfg80211_roamed (err 0)
[ 222.354514] wl: Unknown symbol cfg80211_inform_bss (err 0)
[ 222.354538] wl: Unknown symbol cfg80211_ibss_joined (err 0)
[ 222.354557] wl: Unknown symbol cfg80211_michael_mic_failure (err 0)
[ 222.354569] wl: Unknown symbol cfg80211_connect_result (err 0)
[ 222.354592] wl: Unknown symbol wiphy_unregister (err 0)
[ 222.354608] wl: Unknown symbol cfg80211_get_bss (err 0)
[ 222.354624] wl: Unknown symbol __ieee80211_get_channel (err 0)
[ 222.354653] wl: Unknown symbol ieee80211_channel_to_frequency (err 0)
[ 222.354674] wl: Unknown symbol cfg80211_inform_bss_frame (err 0)
[ 222.354690] wl: Unknown symbol ieee80211_frequency_to_channel (err 0)
[ 222.354708] wl: Unknown symbol wiphy_free (err 0)
[ 299.896188] mce: [Hardware Error]: Machine check events logged
& the wl driver is unloaded.
see next post
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
#dsj....
The 6.30 driver works for me in Precise 5.7.1 pae k3.9.11
what I did:
booted a pristine, frugal install of 5.7.1
installed the 6.30 pet
rebooted - created a savefile **important to reboot**
did rfkill unblock wlan **essential for my system**
made a connection successfully using Frisbee
all worked as expected.
verified with PupScan that the wl driver was being used - also used dmesg to check no error messages as you saw.
you could try blacklisting the b43 driver in case this is somehow interfering.
otherwise your best course of action is to use pdiag in a terminal to create some diagnostic info which we can ask rerwin to have a look at.
cheers
peebee
The 6.30 driver works for me in Precise 5.7.1 pae k3.9.11
what I did:
booted a pristine, frugal install of 5.7.1
installed the 6.30 pet
rebooted - created a savefile **important to reboot**
did rfkill unblock wlan **essential for my system**
made a connection successfully using Frisbee
all worked as expected.
verified with PupScan that the wl driver was being used - also used dmesg to check no error messages as you saw.
you could try blacklisting the b43 driver in case this is somehow interfering.
otherwise your best course of action is to use pdiag in a terminal to create some diagnostic info which we can ask rerwin to have a look at.
cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
I did a fresh install of Precise5.7.1 on a usb drive via puppy universal usb installer.
Created a save file.
Rebooted.
Installed provided Broadcom pet.
Rebooted.
rfkill unblok wlan in terminal.
Try to load wl via modprobe wl.
Same result as previous post.
Attaching pdiag file.
Created a save file.
Rebooted.
Installed provided Broadcom pet.
Rebooted.
rfkill unblok wlan in terminal.
Try to load wl via modprobe wl.
Same result as previous post.
Attaching pdiag file.
- Attachments
-
- pdiag-20140212.tar.gz
- (128.99 KiB) Downloaded 568 times
OK - your device is a combined Broadcom bluetooth / wifi device with the wifi part having id 14e4 4365dsj wrote:Attaching pdiag file.
No driver is claiming this device - see chipnummod.txt
and if you look in /lib/modules/3.9.11/modules.alias
and search for 4365 you will see there is no entry for 14e4 - 4365
so what I suggest you do is find the correct line from Linux Mint and insert it into Precise's modules.alias and then reboot
I've also asked rerwin for his help as I'm not sure the above suggestion is all there is to it.
Using google to search for "Broadcom 14e4 4365" brings up lots of posts....
Cheers
peebee
BTW - I notice that you seem to have loaded the 6.30 driver pet twice??
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
We're struggling - rerwin has confirmed that my suggestion was unlikely to work - sorry.dsj wrote:Inserted the line containing 4365 from linux mint modules.alias to puppy modules.alias.
same message as above
this:
http://www.broadcom.com/docs/linux_sta/README.txt
clearly says it should work - but we've no idea so far why it isn't!!
Perhaps you should post a request for assistance in the Bugs thread to get a wider audience?
Give as much info as you can and point to this thread to show what's been tried.
What seems clear is that you've got a new and complicated chip set which is maybe challenging Puppy's current capabilities....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Slacko64 5.8.8
Live CD first boot.
New Netgear WNA3100 USB wireless adapter
Broadcom BCM43231
Network Wizard
Wireless not recognized.
Tried to setup using ndiswrapper using Windows driver.
Normally works in other Puppies.
After identifying the Windows .inf file to use.
Ndiswrapper setup does nothing.
Edit:
If I try Simple network Setup.
Trying to use Windows driver, I get this message.
error windows driver does not seem to work. It has been uninstalled.
I tried a windows driver from Windows 7 64 version and a Windows XP driver.
Same results with all.
Any ideas on a fix?
Thanks!
Live CD first boot.
New Netgear WNA3100 USB wireless adapter
Broadcom BCM43231
Network Wizard
Wireless not recognized.
Tried to setup using ndiswrapper using Windows driver.
Normally works in other Puppies.
After identifying the Windows .inf file to use.
Ndiswrapper setup does nothing.
Edit:
If I try Simple network Setup.
Trying to use Windows driver, I get this message.
error windows driver does not seem to work. It has been uninstalled.
I tried a windows driver from Windows 7 64 version and a Windows XP driver.
Same results with all.
Any ideas on a fix?
Thanks!
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Hi bigpupbigpup wrote:Any ideas on a fix?
Thanks!
Don't think I've ever uploaded the Slacko64 5.8.8 k3.13.1 pet ......
Anyway it's now available at:
https://app.box.com/s/d3dv96z5gvj61n9zumh1
Hope it helps / works....
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Does not seem to have any affect.peebee wrote: Don't think I've ever uploaded the Slacko64 5.8.8 k3.13.1 pet ......
Anyway it's now available at:
https://app.box.com/s/d3dv96z5gvj61n9zumh1
Hope it helps / works....
Cheers
peebee
Still have same problem.
Keep in mind Slacko64 5.8.8 is an alpha and may have other problems causing this.
What is this Pet suppose to provide?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
The latest Broadcom STA wl.ko driver for 64 bit systems - compiled for Slacko64 k3.13.1....bigpup wrote:What is this Pet suppose to provide?
Did you reboot after installing? You may also need to do
Code: Select all
depmod -a
Quick check - do
Code: Select all
rfkill list wlan
Code: Select all
rfkill unblock wlan
Warning - it may well be that like #dsj you have such a "new" Broadcom device that it is currently unsupported....
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Thanks for the help.
I will try your suggestions and report back.
All Puppies, so far, I have had to use ndiswrapper and Windows driver.
That does not seem to want to work in Slacko64 5.8.8
I will try your suggestions and report back.
There is a good chance that is the problem. I just got it new.Warning - it may well be that like #dsj you have such a "new" Broadcom device that it is currently unsupported....
All Puppies, so far, I have had to use ndiswrapper and Windows driver.
That does not seem to want to work in Slacko64 5.8.8
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Does that include driver for USB wireless devices?The latest Broadcom STA wl.ko driver for 64 bit systems - compiled for Slacko64 k3.13.1....
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
broadcom 43142 / 4365 wlan Lenovo B490 Laptop Puppy Precise
Finally I have managed to get the broadcom wireless working in Puppy Precise 5.7.1
Read the complete article at
http://www.broadcom.com/docs/linux_sta/README.txt
This is what I did
Fresh Install of Puppy Precise 5.7.1 in USB Stick & created save file while rebooting.
Reboot
Install the provided broadcom pet
http://e-nautia.com/peebee/disk/share/b ... recise.pet
Reboot
In a Terminal issued the following commands
rmmod bcma
modprobe cfg80211
modprobe lib80211
modprobe wl
Simple Network Setup was able to detect my connection & I configured it & presently posting from my connected laptop.
On reboot loaded these modules via Boot Manager for automatic loading of modules & automatic wireless connection.
Thanks a lot Peebee. Sorry for the delayed post as I was away for 4 days. (':D')
Read the complete article at
http://www.broadcom.com/docs/linux_sta/README.txt
This is what I did
Fresh Install of Puppy Precise 5.7.1 in USB Stick & created save file while rebooting.
Reboot
Install the provided broadcom pet
http://e-nautia.com/peebee/disk/share/b ... recise.pet
Reboot
In a Terminal issued the following commands
rmmod bcma
modprobe cfg80211
modprobe lib80211
modprobe wl
Simple Network Setup was able to detect my connection & I configured it & presently posting from my connected laptop.
On reboot loaded these modules via Boot Manager for automatic loading of modules & automatic wireless connection.
Thanks a lot Peebee. Sorry for the delayed post as I was away for 4 days. (':D')
Last edited by dsj on Mon 17 Feb 2014, 22:58, edited 5 times in total.
Re: broadcom 43142 / 4365 wlan Lenoveo B490 Laptop
Hi #dsj - that's really good news - shows that the basic driver is working - just needs the detection and configuration logic to configure things correctly for your device - hopefully this will follow in the not too distant future....dsj wrote:Finally I have managed to get the broadcom wireless working in Puppy Precise 5.7.1
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Slacko64 5.8.8
Live CD first boot.
New Netgear WNA3100 USB wireless adapter
Broadcom BCM43231
peebee,
I tried you suggestions, but still does not work.
It seems there is nothing in Linux for this device.
Did a Google search and everyone is having to use ndiswrapper and the Windows driver.
The problem is I can not get ndiswrapper to work in Slacko64 5.8.8
I posted about this in the Slacko64 topic.
I even went to Slackware64 14.0 salix repository and installed the ndiswrapper that was there.
It tried to work, but not completely.
I think it was the wrong kernel version.
Not sure if that matters?
Live CD first boot.
New Netgear WNA3100 USB wireless adapter
Broadcom BCM43231
peebee,
I tried you suggestions, but still does not work.
It seems there is nothing in Linux for this device.
Did a Google search and everyone is having to use ndiswrapper and the Windows driver.
The problem is I can not get ndiswrapper to work in Slacko64 5.8.8
I posted about this in the Slacko64 topic.
I even went to Slackware64 14.0 salix repository and installed the ndiswrapper that was there.
It tried to work, but not completely.
I think it was the wrong kernel version.
Not sure if that matters?
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
When I was a kid I wanted to be older.... This is not what I expected
YaPI(any iso installer)
Hi bigpupbigpup wrote:Slacko64 5.8.8
Live CD first boot.
New Netgear WNA3100 USB wireless adapter
Broadcom BCM43231
peebee,
I tried you suggestions, but still does not work.
If you want to post or pm me the outputs from pdiag then I'll have a look to see if I can determine the problem.
Can you do 2 - the first after a clean boot of just Slacko64, the second after installation of the pet and depmod -a and a reboot.
Thanks
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64