Precise Puppy RC2, October 20, 2012
CONFIG_HID_LOGITECH_DJ=m -----------> CONFIG_HID_LOGITECH_DJ=y
In kernel hid section. That is needed with 3.2.X kernel. Proved to work with new logitech usb receiver. It is changed behavior and the logitech usb receiver does not work oob without compiling the module in, not as module. The fix has been verified with Exprimo and Saluki kernel.
# CONFIG_IWLWIFI is not set
Previously iwlagn is now iwlwifi, it needs to be enabled and to have corresponding firmwares to be installed. I can provide my firmware package later, if there is need for them
In kernel hid section. That is needed with 3.2.X kernel. Proved to work with new logitech usb receiver. It is changed behavior and the logitech usb receiver does not work oob without compiling the module in, not as module. The fix has been verified with Exprimo and Saluki kernel.
# CONFIG_IWLWIFI is not set
Previously iwlagn is now iwlwifi, it needs to be enabled and to have corresponding firmwares to be installed. I can provide my firmware package later, if there is need for them
make menuconfig > main menu > networking support > bluetooth subsystem support:
# FIR device drivers
#
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set -------> enable
# CONFIG_BT_SCO is not set ---------> enable
and all the subsequent options also which will pop up when you enable these:
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
You have bluetooth as module but not the communications modules.
etc....
You have enabled the a lot bluetooth modules, you need protocols which handles the communications.
I think bluetooth support would be good for precise pangolin.
# FIR device drivers
#
CONFIG_BT=m
# CONFIG_BT_L2CAP is not set -------> enable
# CONFIG_BT_SCO is not set ---------> enable
and all the subsequent options also which will pop up when you enable these:
CONFIG_BT_L2CAP=y
CONFIG_BT_SCO=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
You have bluetooth as module but not the communications modules.
BTL2CAP is a protocol that sits directly ontop of BTHCI_ACL and which prodives signalling and sessions between applications on two Bluetooth devices.
The btsco driver provides support for Bluetooth SCO Audio devices through the audio driver.
The RFCOMM protocol supports up to 60 simultaneous connections between two BT devices.
etc....
You have enabled the a lot bluetooth modules, you need protocols which handles the communications.
I think bluetooth support would be good for precise pangolin.
Last edited by pemasu on Tue 27 Mar 2012, 20:39, edited 1 time in total.
Missing module and lib's
Missing module iwlagn for Intel Wireless.
Missing libLLVM needed for mesa-dri modules, what are included.
Missing liblzma needed for squasfs-tools.
Missing libpci needed for lspci.
Missing libLLVM needed for mesa-dri modules, what are included.
Missing liblzma needed for squasfs-tools.
Missing libpci needed for lspci.
Same problem with latest Flashplayer 11.2.202.228. The problem only occurs with Precise Puppy. Flash works well with Racy and Wary.linux28 wrote:FlashTerryphi wrote:Latest Flash (11.1.102.63) crashes with a segmentation fault on all browsers tested.
[b]Classic Opera 12.16 browser SFS package[/b] for Precise, Slacko, Racy, Wary, Lucid, etc available[url=http://terryphillips.org.uk/operasfs.htm]here[/url] :)
flash dependency
Flash just wants dependency to be met. This with Firefox 11 with wrapper script to launch firefox:
/usr/bin/firefox --------->script to launch firefox:
#!/bin/sh
/usr/lib/firefox/run-mozilla.sh /usr/lib/firefox/firefox "$@"
Magical juice: libcurl3-gnutls.....maybe librtmp0....suggest to install it also...as posted previously.....Maxerro ?
/usr/bin/firefox --------->script to launch firefox:
#!/bin/sh
/usr/lib/firefox/run-mozilla.sh /usr/lib/firefox/firefox "$@"
Magical juice: libcurl3-gnutls.....maybe librtmp0....suggest to install it also...as posted previously.....Maxerro ?
pemasu,
Thanks for the flashplayer fix. All Precise Puppy needs is librtmp0 which can be downloaded from the ubuntu-precise-main repository using Puppy Package Manager.
Thanks for the flashplayer fix. All Precise Puppy needs is librtmp0 which can be downloaded from the ubuntu-precise-main repository using Puppy Package Manager.
[b]Classic Opera 12.16 browser SFS package[/b] for Precise, Slacko, Racy, Wary, Lucid, etc available[url=http://terryphillips.org.uk/operasfs.htm]here[/url] :)
evince,fbreader,gimp
Download a lot dependent on run up
libcairo-gobject2_1.10.2-6.1ubuntu2_i386.deb
libgail-3-0_3.3.20-0ubuntu1_i386.deb
libgrip0_0.3.4-0ubuntu1_i386.deb
liblaunchpad-integration-3.0-1_0.1.54build1_i386.deb
libmtdev1_1.1.0-2ubuntu1_i386.deb
libutouch-evemu1_1.0.8-0ubuntu1_i386.deb
libutouch-frame1_2.2.2-0ubuntu1_i386.deb
libutouch-geis1_2.2.7-0ubuntu2_i386.deb
libutouch-grail1_3.0.3-0ubuntu1_i386.deb
........
All install will not work
Download a lot dependent on run up
libcairo-gobject2_1.10.2-6.1ubuntu2_i386.deb
libgail-3-0_3.3.20-0ubuntu1_i386.deb
libgrip0_0.3.4-0ubuntu1_i386.deb
liblaunchpad-integration-3.0-1_0.1.54build1_i386.deb
libmtdev1_1.1.0-2ubuntu1_i386.deb
libutouch-evemu1_1.0.8-0ubuntu1_i386.deb
libutouch-frame1_2.2.2-0ubuntu1_i386.deb
libutouch-geis1_2.2.7-0ubuntu2_i386.deb
libutouch-grail1_3.0.3-0ubuntu1_i386.deb
........
All install will not work
-
- Posts: 53
- Joined: Mon 20 Nov 2006, 08:26
- Contact:
fido power-off -> complain after sudo...
-precise saved with fido (non root) on power-off or reboot stops in terminal mode complaining about not finding 'sudo', and must be restarted with CtrlAltDel.....
-/usr/share/geany/ is empty ! (no C...language highlight, etc)
-makesquasfs is complaing for missing liblzma, after install is ok
I made an wireshark 1.6.5.2-precise.sfs for anybody interested can be download at:
http://www.datafilehost.com/download-289009cf.html
-/usr/share/geany/ is empty ! (no C...language highlight, etc)
-makesquasfs is complaing for missing liblzma, after install is ok
I made an wireshark 1.6.5.2-precise.sfs for anybody interested can be download at:
http://www.datafilehost.com/download-289009cf.html
- butchydave
- Posts: 44
- Joined: Sat 03 Mar 2012, 14:50
1. Live cd
2. ACPI=OFF on boot
3.wireless RT-73 Tried SNS, Dougal & then install frisbee, connected!!!
4. Downloaded the missing librtmp0 = flash working!
intel p4 2.40ghz 1500Mz ram
Cruzn the pup--think I'll try netbootin on a usb.
Seems to work pretty good. Lucid is my favorite to date. Saluki is getting sweeter by the day toooooo.
Thank you so much for the Puppies!
2. ACPI=OFF on boot
3.wireless RT-73 Tried SNS, Dougal & then install frisbee, connected!!!
4. Downloaded the missing librtmp0 = flash working!
intel p4 2.40ghz 1500Mz ram
Cruzn the pup--think I'll try netbootin on a usb.
Seems to work pretty good. Lucid is my favorite to date. Saluki is getting sweeter by the day toooooo.
Thank you so much for the Puppies!
Re: fido power-off -> complain after sudo...
There are other software suitable for precise?ferikenagy wrote:-precise saved with fido (non root) on power-off or reboot stops in terminal mode complaining about not finding 'sudo', and must be restarted with CtrlAltDel.....
-/usr/share/geany/ is empty ! (no C...language highlight, etc)
-makesquasfs is complaing for missing liblzma, after install is ok
I made an wireshark 1.6.5.2-precise.sfs for anybody interested can be download at:
http://www.datafilehost.com/download-289009cf.html