Page 44 of 44

Re: kernel headers??

Posted: Mon 22 Oct 2012, 06:32
by 666philb
Ted Dog wrote:Where are we hiding those kernel headers for wary/racy as well? Tried to compile NVidia drivers and those headers where not found, expected with the huge size of dev.sfs those would be included.
the kernel sources are usually here http://bkhome.org/sources/

usual password

SFS load on the fly not 100% work same with load on boot

Posted: Mon 22 Oct 2012, 09:55
by ferikenagy
some time ago I have made an SFS containing AVR-GCC compiler for AVR 8 bit controler, (it is uploaded in this forum ), to proper function it must set the PATH & LD_LIBRARY_PATH enviroment, which is made by this script /etc/profile.local contained in SFS file:

#!/bin/sh
#set avr path, script /etc/profile calls if exist /etc/profile.local
export PATH=$PATH:/usr/local/avr/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/avr/lib

this script is run by /etc/profile, it works OK when SFS is load on boot by boot manager when we have created puppy save file, meaning it can be compiled from terminal window XVRT and from Geany (BUILD/Make command).

With no puppy save file , but SFS load on the fly I can compile from terminal window XVRT but it Fails to compile from inside Geany (with Build/Make command)! where is the difference? from outside X (at command prompt) if I force:
#/etc/profile.locale
#xwin
nothing change (work from XVRT terminal but not from Geany)
but if I force:
#exec /etc/profile.locale
#xwin
than everything is ok works both from XVRT terminal & Geany too!!!

So what is the difference? why it happens,why cannot work exactly in same way for SFS load on the fly and load on the boot?

what is the solution? please somebody give me a hint how to set this enviroment variables within SFS (or better how should look an better initialisation script within SFS) to work correct (the same) with no regard if is load on the fly or by boot manager or if it is run within terminal or Geany.....or maybe must be change something in the "profile" script the way it calls "profile local"? or something in Geany configuration? Anyway from now on "load SFS on the fly" will be in puppy menu and we should get a solution for this different behavior . Thanks

Posted: Mon 22 Oct 2012, 14:43
by artsown
Mikesir .... I tried wine-1.4-i486.pet on Precise RC2 and I'm not
getting quality results. My reference points are both Lucid and
Luci which work exceedingly well for me in practically all respects.
But in particular their repo wine pets work well for me on those
puppies (good quality).

I uninstalled wine and tried the repository wine with the same
results (rc2) as I had with rc1 ... it claims wine is installed but
it is not. So I reinstalled the wine pet and I'm suffering poor
quality results. Don't know yet what might get me clean wine
results on rc2.

Insofar as testing rc2 goes, I've tried it now on three similar
but different PCs. The "mostly black screen at startup" occurs
somewhat rarely with rc2 but the problem is still there. I found
out why it's a bad idea to blindly do a Restart X Server as the
last item in the startup sequence. If Puppy picks the wrong
video driver (which happened on one machne here) then
doing the R X S has very negative results (all white screen
or gibberish screen) where only Ctrl-Alt-Backspace or pulling
the power plug gets you out.

I had one instance where Personal Settings showed Vesa
after I purposely set a intel driver. I've also experienced
gibberish video after purposely setting Vesa.

Anyway, I like the speed of Precise and I'll no doubt follow
its development. But IMO it's not ready for prime time. My
pesonal favorite is Luci (three headed dog) which is solid
and quick on all three of my PCs here.

Art

Posted: Mon 22 Oct 2012, 17:21
by bigpup
artsown,

Have you tried the Wine pets from here:
http://www.murga-linux.com/puppy/viewtopic.php?t=53675

Chromium 24 for Precise 5.4RC

Posted: Mon 22 Oct 2012, 17:27
by peebee
Chromium-24.0.1297.0 sfs is available from:

http://murga-linux.com/puppy/viewtopic. ... 962#659962

Posted: Mon 22 Oct 2012, 18:28
by artsown
bigpup ... Yes, I think I tried at least one of those PETs.

Art

Extraneous puninstall.sh file in root (top) level of CD/ISO

Posted: Mon 22 Oct 2012, 18:59
by rerwin
Barry,
While continuing unsuccessfully to look for a reason for the 5+ megabyte difference between the original and remastered puppy files, I notice that there is a puninstall script at the top level of the main (puppy_precise_5.3.9*.sfs) file in both of the RCs. I doubt that you intend for it to be there in the final, so I thought I would mention it.
Richard

Precise RC2 working fine

Posted: Mon 22 Oct 2012, 19:43
by mikeslr
Hi Barry & All,

Manual Frugal Install of RC2 to the following:
ATI Radeon 3100 Graphics supporting 1600x900 pixels
RaLink RT2561/RT61 802.11g PCI
SB [HDA ATI SB], device 0: VT1708B Analog
SB {HDA ATI SB], device 1: VT1708B Digital

Everything, including Ati Radeon Graphics, working fine. All my customary pets/Sfses are completely functional.

@ artsown: That includes Greendome's wine 1.4.1-i486.pet. Different computers, different results.Sorry, I don't recall what your computer's specs are, especially its Graphics. Perhaps someone with the same or similar setup could help figure out why you are experiencing difficulties, and how to overcome them.


I look forward to testing the non-PAE version when it becomes available.

p.s., Not crazy about the default wallpaper, but do like the default icon theme very much.

mikesLr

Posted: Tue 23 Oct 2012, 01:04
by BarryK
Precise Puppy 5.4-final is out.

New Forum thread:
http://murga-linux.com/puppy/viewtopic.php?t=81672

Precise Puppy 5.4

Posted: Tue 23 Oct 2012, 01:56
by majorfoo
posted to wrong thread
Re posted in Precise 5.4 thread

Posted: Tue 23 Oct 2012, 04:05
by James C
Sage wrote:JamesC: please advise where you get some of those superb wallpapers you use. Can't live with some of the awful things that've been appearing recently!
Courtesy of a special theme pack from Microsoft...... :)

Tarred up a couple.....

Posted: Tue 23 Oct 2012, 06:03
by Sage
Ha! Ha! Thanks a bunch, James.

Re: Sys-info System Information icons

Posted: Wed 24 Oct 2012, 17:21
by tazoc
bigpup wrote:Precise RC1
Live CD
save file on CD

Sys-info System Information

The button to run Pupsysinfo is grayed out.
When mouse pointer is over button it says go to help to install program.
OK
After install of program Pupsysinfo the button icon is missing.
Several icons also missing on help window.
See picture.
Somehow the icons at /usr/share/icons/hicolor/ were left out of Barry's Pet.

Please install the latest version, currently sys-info-1.4.1-noarch.pet. That will fix the missing icons.

Get it here: http://www.murga-linux.com/puppy/viewtopic.php?t=60462

radky's PupControl or PupSysInfo is suggested but not required. Installing either one will enable the PupSysInfo button.

-TaZoC

Re: Precise Puppy RC2, October 20, 2012

Posted: Fri 23 Nov 2012, 19:33
by greengeek
BarryK wrote:
Billtoo wrote:In highlightnotvisible.jpg I have highlighted the entire section but
only see the first line as highlighted.
I'm sorry, I cannot reproduce this. Whichever way I highlight a block of text, it is all highlighted. And it stays all highlighted, no matter how window focus changes.
I too have problems with highlighted text not being dark enough to see (except in a dark room). If I use Leafpad and highlight some lines of text the text stays black but the highlight background is a very pale (almost invisible) grey. If I then click onto another window I can see that the Leafpad text inverts to white, and the background highlight goes dark grey and is clearly visible. (of course it doesn't stay that way when I click back into Leafpad)

Possibly this effect of grey intensity varies from screen to screen and therefore does not present an issue for some people.

I am assuming that if I could change the specification for the "in focus background highlight" to a darker grey it would overcome the problem. Or maybe I need to change it so that highlighting INVERTS the colours, just as "out of focus background highlight" seems to do. Does anyone know where the exact colour/intensity is specified? (I'm guessing it's not a ROX setting as that wouldn't affect text colour within Leafpad would it?)

Changing to a different jwm theme does not seem to cure the issue for me.

Re: Precise Puppy RC2, October 20, 2012

Posted: Fri 23 Nov 2012, 19:41
by greengeek
Billtoo wrote:I changed the theme to gradient gray and highlighing works now.
hot dog!
Sorry, my mistake. I was changing the jwm theme, and you meant the gtk theme. Changing gtk theme to "gradient grey" cures my highlight problem.

EDIT:It seems that my gtk theme had previously been set to "stark blueish" which causes the pale highlighting.