Squeezed Arm Puppy for Raspberry Pi, alpha4

Please post any bugs you have found
Message
Author
User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#151 Post by rhadon »

First success :D .

From a menu I can select sap6 and it boots to the desktop.

Keyoard isn't working, so it's only a small success :oops: . I guess it has to do with mksqashfs. Without /lib/modules (as suggested), I get kernel panic, with these, I get no keyboard. But it's a start :wink: .

I hold the line,
Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#152 Post by 01micko »

Here's a sneak peek at my secret raspi project :wink:

Image


Image



:twisted:
Puppy Linux Blog - contact me for access

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#153 Post by Lobster »

Thanks Mick 8)

. . . for taunting us . . . :wink:
Iceape = Seamonkey
The most stable, powerful Puppy chimp

I have an SD card primed and ready
Good luck and remember to be kind to yourself
http://www.scientificamerican.com/artic ... tal-health

Cases of beer to the usual shed
http://www.01micko.com/

:)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#154 Post by rhadon »

Hi,
no positive news about multi boot so far. :?

No matter I use alpha 2 or 3, including /lib/modules or not, it allways boots to the desktop and no keyboard available. I tried different options in cmdline.txt but without knowledge, only try and error. I guess that we must wait till one of the big dogs (meaning one with more knowledge than me :oops: ) will be interested.

Differences to the HOWTO:
kpartx doesn't work for me. I couldn't find it in the Slackware repos (Slacko 5.3.3.1), using a .deb file, I wasn't patient enough to solve all dependencies. :oops:

In Lucid 528 I could install kpartx with alll dependencies(?) but get an error message during run.

Well, at last we don't need kpartx, if we have the extracted files at partition 2 of the sd card or a copy of them (that's what I used).

I guess that all we need is the mksquash command.

The option -comp lzo doesn't work for me (get the message: not supported). So I used

Code: Select all

# mksquashfs /mnt/sdc5/sap6a3p2 Puppy_sap6_alpha3 -e /mnt/sdc5/sap6a3p2/lib/modules 
and

Code: Select all

mksquashfs /mnt/sdc5/sap6a3p2 Puppy_sap6_alpha3
Last point, the converted file must be placed in /images.

If anybody has an idea what's wrong, please tell me. :wink:

Thanks,
Rolf

Edit: a small step further. :?
Keyboard works, but not the arrow keys and no mouse support (at least).
With F12 the menu pops up, I can select with "h","j", "k", "l" and ENTER key, no arrow keys. Mouse doesn't work. Tested both with usb and wireless.
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#155 Post by Lobster »

If anybody has an idea what's wrong, please tell me.
Ask Dr Love
http://www.guardian.co.uk/science/2012/ ... sfeed=true

. . . Oh you mean about multiboot :oops:
Don't know - bring on the smart dogs . . .
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
BarryK
Puppy Master
Posts: 9392
Joined: Mon 09 May 2005, 09:23
Location: Perth, Western Australia
Contact:

#156 Post by BarryK »

[url]https://bkhome.org/news/[/url]

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#157 Post by 01micko »

testing Alpha4

Sound works OOTB 8) (I can only use analog)

Light browsing seems fine.

If you are interested I wrote a small gtkstatusicon in C to pop up "mixmos". It's very simple, you could make it more complex but I don't see the point.

PET <-- http://www.smokey01.com/01micko/armv6/p ... -armv6.pet

SOURCE <-- http://www.smokey01.com/01micko/armv6/s ... .1.tar.bz2

On printing, I can't test! My printer needs either a special driver or gutenprint-5.2.8. I might compile gutenprint (overnigtht :wink: ). Printing fails with cups-1.5.3 in Wheezy Arm Puppy.
Puppy Linux Blog - contact me for access

User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#158 Post by rhadon »

First tests with alpha4:

My first impression, it's a good one. :D
German keyboard layout works fine. :D

Still problems with firewall. I can't install firewall during first boot or menu->Setuo->Firewall Wizard. Allways get the message

Code: Select all

'rxvt-unicode-256color: unknown terminal type. 
 Configuration terminated. Goodbye. 
 Firewall install script finished.
and firewall doesn't install.
Moving to /usr/sbin and running firewallinstallsh directly works and firewall installs. :wink:

I'll test more during the day/evening.

btw. Alpha4 works also with multiboot now :D . No more problems with keyboard or mouse. By now I've installed 10 (ten!) distros on a 8GB sd card and still have ~ 4.2 GB free space. :P

~Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

aragon
Posts: 1698
Joined: Mon 15 Oct 2007, 12:18
Location: Germany

#159 Post by aragon »

@rhadon

maybe a valid terminfo is missing for rxvt-unicode-256color.

aragon

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#160 Post by Lobster »

Finally in Alpha 4 - problems with dd in Slacko 5.3.3.2
took for ever to recognise my SD card . . .

Anyway tested sound.
Did not seem to work
typed in depmod at console and rebooted
(not even sure if that makes a real difference)

Then opened gnome mplayer from icon and was able to play ivy.mp3
This was the only file that seemed to play.
It played once and then I had to reboot to play again :shock:

The ivy.mp3 was the best test file in Puppi cockroach too incidentally. The sound is quiet even with mixmos set to full.

From strangled wasp to actual sound, progress ;)
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#161 Post by 01micko »

Lobster wrote:Finally in Alpha 4 - problems with dd in Slacko 5.3.3.2
took for ever to recognise my SD card . . .
Thia is often a hardware issue. Those cheapy (and some not so cheap) card readers are to blame, I had the same until I switched readers, now no problem.
Lobster wrote:typed in depmod at console and rebooted
(not even sure if that makes a real difference)
Lobster, that bug is only in my Wheezy build, Sap6 uses the older style depmod and modules tools. Sound is working out of the box in Sap6! :)
Lobster wrote:The sound is quiet even with mixmos set to full.
I think for decent sound you needa a pair of powered speakers. Since raspi is so low powered it's probably sending minimal current through the sound circuit, probably only enough to just drive your headphones. My 120W powered monitors ( read sound monitors :wink: ) sound great!! :P
Puppy Linux Blog - contact me for access

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#162 Post by 01micko »

Barry

When I plug in my usb HDD I don't get the drive icons (2 partitions, ntfs and ext4). Need to run Pmount to use it.

Attempting to compile gutenprint-5.2.8 now.

EDIT: Yes! Printing works for me with gutenprint-5.2.8 .. more tomorrow, having a beer now! (tested with a .doc from abiword).

EDIT2: Got that problem with Xorg not dying, had to hard power off.. I reckon it's a kernel issue because my new kernel actually powers down the Pi (different xorg version though). Sap6 has never done that. The filesystem check was started and seemed successful.


(later edits are fixing typos due to beer :roll:)
Last edited by 01micko on Fri 20 Jul 2012, 13:56, edited 2 times in total.

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#163 Post by Lobster »

Thanks mick - using unpowered speakers
Gonna get better reader

http://www.engadget.com/2012/07/19/chro ... available/

Browser
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#164 Post by Lobster »

I think for decent sound you needa a pair of powered speakers
Yep that worked. I think they are 5 watt - good enough. 8)

Also downloaded the devx.
Had to copy all the devx files to /
and reboot. Is that right? Can SFS be loaded automatically yet?

Just compiled the ubiquitous 'hello world' like so:

Code: Select all

# gcc hi.c -o hi
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

User avatar
rhadon
Posts: 1292
Joined: Thu 27 Mar 2008, 11:05
Location: Germany

#165 Post by rhadon »

aragon wrote:maybe a valid terminfo is missing for rxvt-unicode-256color.
Maybe, but I don't know where to look for. :oops:
Lobster wrote:problems with dd in Slacko 5.3.3.2
took for ever to recognise my SD card . . .
After installing .img files with dd and sync (internal card reader, EeePc), I can't mount the card. Gparted shows allways yellow triangles for partition 1 and 2. After moving the swap partition to the end (or creating one), the triangles disappear and everything is fine. This worked everytime for me.
01micko wrote:When I plug in my usb HDD I don't get the drive icons (2 partitions, ntfs and ext4). Need to run Pmount to use it.
I tested 2 usb hds, one with some ext3 and ext4 partitions and one with some vfat and ext3 partitions. Drive icons work as expected. So I would guess, it's a problem with ntfs. :wink:

HTH,
Rolf
Ich verwende "frugal", und das ist gut so. :wink:
Raspberry Pi without Puppy? No, thanks.

User avatar
antiloquax
Posts: 405
Joined: Fri 27 Jan 2012, 09:17

#166 Post by antiloquax »

antiloquax wrote:
glxgears test

"Safe" overclock: best reading was 19.170 fps

No overclock: 19.077 fps

Over-voltage: 26.994 fps
Over-voltage with swapon - 29.103
Thought I'd run this in Arch, just for fun.
This was in the "safe" overclock settings, with swapon:
31.844 fps
My System:Arch-Arm on RPi!
"[url=http://murga-linux.com/puppy/viewtopic.php?t=76049l]RacyPy[/url]" puplet on Toshiba Tecra 8200. PIII, 256 MB RAM.
[url=http://raspberrypy.tumblr.com/]RaspberryPy[/url]: Lobster and I blog about the RPi.

eowens2
Posts: 177
Joined: Wed 27 Aug 2008, 17:57

#167 Post by eowens2 »

Just a couple of comments on SAP6 alpha-4.

The sound "just works" OTB on my powered analogue speakers (I have not tried them on previous alpha versions). I did not go thru any set-up of ALSA. There is occasional static coming thru them; the speakers are quite inexpensive ones just purchased from Walmart, so the static problem could be in the quality of the speakers (I have not used them before on a different system). I used GNOME MPlayer to play some MP3 files.

I am not hearing the "Woof-Woof" during the boot up of Puppy. Has this not been added yet?

The CUPS 1.4.4 continues to work (I used it in alphas 1 and 2 but not try it in 3). It found my HP 6500 e710n multifunction printer (wirelessly connects to my router, R_pi connects by wired ethernet to the router) without difficulty, and installed it using the drivers found in HPLIP.

When one clicks on the "Setup CUPS Printing" choice in the "Setup" Desktop icon, the user is routed thru an info page which says that HPLIPlite is available, but PPM is unable to find HPLIPlite. HPLIP (heavy!) could be found and that I what I used for my printer driver.

PPM is still installing the Ace-of-Penguins games under Utilities/General Utilities/name-of-game; however Mahjong installs under the "Fun" menu. I am still seeing the "line 1 : syntax error: unexpected '(' " during the updating and processing of the databases.

rrolsbe
Posts: 185
Joined: Wed 15 Nov 2006, 21:53

Glad to hear multioot is working with Puppy Alpha4

#168 Post by rrolsbe »

Rolf

Thanks for keeping us abreast of your multiboot testing!

Since, In my opinion, booting Puppy using only only SFS files and a PUPSAVE file is one of Puppies greatest strengths (among many!), multiboot interests me greatly. Since the Pi must un-compress binaries located inside SFS files, does the Pi seem to launch the binaries slower? I assume the core SFS file is to large to be resident in RAM as it is on my x86 machine with LOTS of RAM? Since the read speed is fairly slow on a typical Pi SDHC card, the time it takes to un-compress might be negligible because less information must be read from the SDHC media? However, this may not be true if the full install and SFS installs were being read from a FASTER USB2.0 attached hard drive/SSD? I am currently trying out Puppy Alpha-4 and Raspbian and have /root for each on two ext4 partitions on an external hard drive. I simply change some settings in the SDHC vfat /boot partition to select which OS to boot. BTW, both OS's are more responsive using /boot from the external hard drive. This external USB hard drive is connected to and is being powered by a USB port on my Motorola LapDock.

What I would like to do is multiboot from a large SDHC card (slow but most portable), large USB stick (faster but must give up a USB port) and a USB spinning/SS drive (hopefully faster than a USB stick but still gives up a USB port and draws more battery power when disconnected from the 110 outlet). Binary loading time testing needs to be performed to verify my speed assumptions.

At this time Raspbian appears to be slightly more responsive that Puppy Alpha-4, but It appears the Puppy Gods are looking at Raspbian armhf for a future Puppy version (YEAH!!!) Hopefully the Raspbian/Puppy developers will incorporate the assembly language SSL code to speed up SSH and HTTPS. When this happens, I predict Puppy will be the official OS recommended by the Raspberry Pi foundation (but I have been wrong many times in the past).

Thanks Again Rolf!
Regards, Ron

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#169 Post by 01micko »

Gutenprint!

This has heaps of new drivers,

http://www.smokey01.com/01micko/armv6/p ... -armv6.pet

dev,nls in folder http://www.smokey01.com/01micko/armv6/p ... s-squeeze/

Note to Barry, needed krb5-multidev squeeze package to compile as gssapi.h is not in the libkrb5-dev package.[ :? strange]

This will fix some local printing issues ie: no driver for your printer. There are lots of new Canon drivers and others.
Puppy Linux Blog - contact me for access

User avatar
Lobster
Official Crustacean
Posts: 15522
Joined: Wed 04 May 2005, 06:06
Location: Paradox Realm
Contact:

#170 Post by Lobster »

I am not hearing the "Woof-Woof" during the boot up of Puppy. Has this not been added yet?
Not been added. Not sure if Barry has sound yet. I have sound from headphone not yet on HDMI.
I changed my TV from auto to PCM audio output. No difference. Still trying to find some elusive setting . . .
Puppy Raspup 8.2Final 8)
Puppy Links Page http://www.smokey01.com/bruceb/puppy.html :D

Post Reply