Slacko 5.4 - FINAL 2 Dec 2012

News, happenings
Message
Author
User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#496 Post by bigpup »

Slacko beta2 k3.2.31 [opera, NO PAE]

Pmusic-> help->Dependency Check

Get this for result of check..
Attachments
capture11975.png
(9.65 KiB) Downloaded 1188 times
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#497 Post by James C »

Another different Nvidia card ..... another quick test of 5.3.65. Sound,internet and display all correct on initial boot.


# report-video
Report Video 1.4 - Mon 5 Nov 2012 on Slacko Puppy 5.3.6.5 - Linux 3.2.31-4g i686

Chip description:
0.0 VGA compatible controller: nVidia Corporation NV44A [GeForce 6200] (rev a1)
oem: NVIDIA
product: nv44 Board - p382h1 Chip Rev

X Server: Xorg Driver used: nouveau

X.Org version: 1.12.3
dimensions: 1024x768 pixels (270x203 millimeters)
depth of root window: 24 planes

...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
# glxgears
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 55
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 56
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 59
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 58
nvfx_screen_get_param:95 - Warning: unknown PIPE_CAP 30
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
3135 frames in 5.0 seconds = 626.868 FPS
3607 frames in 5.0 seconds = 721.311 FPS
3666 frames in 5.0 seconds = 733.109 FPS
3486 frames in 5.0 seconds = 697.136 FPS
3586 frames in 5.0 seconds = 717.079 FPS

-Computer-
Processor : Intel(R) Pentium(R) 4 CPU 2.00GHz
Memory : 1554MB (231MB used)
Operating System : Unknown distribution
User Name : root (root)
Date/Time : Mon 05 Nov 2012 01:35:23 AM CST
-Display-
Resolution : 1024x768 pixels
OpenGL Renderer : Gallium 0.4 on NV4A
X11 Vendor : The X.Org Foundation
-Multimedia-
Audio Adapter : ICH - Intel 82801BA-ICH2
Audio Adapter : MPU-401 UART - MPU-401 UART
No problems with the basics.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#498 Post by 01micko »

Coming soon.....

from the changelog....
BETA (3)
added premote-0.9.3 (mcewanw --missed it last time)
added libdbusmenu-qt (PITA!)
added network_roxapp-0.5
added YASSM-2.5.1 (rcrsn51)
added broadcom firmware (pemasu, woof)

readded 915resolution (tempestuous)

removed pnethood

update pmusic-2.9.10 (zigbert)
update pequalizer-0.9.0 (me)
update pburn-3.7.6 (zigbert)
update pfilesearch-1.3.3 (zigbert)
update pclock-0.7.1 (zigbert)
update pfind-5.04 (zigbert)
update pmirror-0.6.1 (zigbert)
update pproces-2.3.2 (zigbert)
update pschedule-1.0.3 (zigbert)
update ptiming-0.8.1 (zigbert)
update snap2 (lstandish)
update PupControl-2.2.2 (radky)
update pavrecord-0.9.2 (mcewanw)
update precord-8.1.4 (mcewanw)
update screeny-0.8 (me)
update update-manager-0.2 (me)
update mpscan-0.1.0 (kirk)
update sys-info-1.4.2 (tazoc)

update k3.2.33 (4g) compiled module usbip
update k3.4.17 (PAE) compiled module usbip

bugfix bibletime deps (repo)
bugfix full installs (replace /etc/rc.d/rc.update busybox depmod call with \
depmod call)
bugfix revert create a circular symlink kde4 > applications \
and patch jwm_menu-create instead
bugfix remove %u in firefox

woof-121105

NOTE: subject to change!
tomorrow with any luck :)
Puppy Linux Blog - contact me for access

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#499 Post by bigpup »

Convert-pupsave
Nice little program for working with save files.
Needs some updating and probably tweaking to work with latest Puppies, but would be a nice program to have.
http://www.murga-linux.com/puppy/viewto ... 587#662587
This program resizes and/or changes the encryption mode and/or changes the file system of your
pupsave, by generating a new one from your currently-booted pupsave. It leaves the old one
untouched. With this tool, the following tasks can be accomplished:

1) Resize the pupsave larger or smaller (within reason). Size does not have to be a power of 2; if
you want a 439MB pupsave, you can have it.

2) Change from using the default cleartext pupsave to an encrypted one.

3) Change from using an encrypted pupsave back to a cleartext one (perhaps for reasons of
maintenance), or change which encryption algorithm is used.

4) Change the password on your encrypted pupsave (by simply generating another encrypted pupsave
with a different password).

5) Change from an ext3 to an ext2 pupsave, or vice-versa.

More than one change can be done at once. Needless to say, you have to be using a pupsave FILE in
the first place for this to apply. It is not for full-install Puppies, nor for multisession, nor
for the case where the user information is stored on a partition.
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

User avatar
bigpup
Posts: 13886
Joined: Sun 11 Oct 2009, 18:15
Location: S.C. USA

#500 Post by bigpup »

Zigbert will correct Pmusic dependency check message in version 3.0
Stated here in Pmusic topic.
http://www.murga-linux.com/puppy/viewto ... 584#662584
The things they do not tell you, are usually the clue to solving the problem.
When I was a kid I wanted to be older.... This is not what I expected :shock:
YaPI(any iso installer)

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#501 Post by 01micko »

Slacko 5.4 Beta 3 4g and PAE versions, devx and kernel source is released.

See main post
Puppy Linux Blog - contact me for access

User avatar
Billtoo
Posts: 3720
Joined: Tue 07 Apr 2009, 13:47
Location: Ontario Canada

Slacko - beta3 [5.4]

#502 Post by Billtoo »

I did a full install on my emachines D620 laptop.

Report Video 1.4 - Tue 6 Nov 2012 on Slacko Puppy 5.3.7.0 -Linux 3.2.33-4g i686
Chip description:
5.0 VGA compatible controller:ATITechnologiesInc RS690M [Radeon X1200 Series]
oem: ATI ATOMBIOS
product: RS690 01.00
X Server: Xorg Driver used: radeon
X.Org version: 1.12.3
dimensions: 1280x800 pixels (338x211 millimeters)
depth of root window: 24 planes
OpenGL
Vendor X.Org R300 Project
Renderer Gallium 0.4 on ATI RS690
Version 2.1 Mesa 8.0.4
Direct Rendering Yes
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
277 frames in 5.0 seconds = 55.379 FPS
298 frames in 5.0 seconds = 59.426 FPS
298 frames in 5.0 seconds = 59.423 FPS
Computer
Processor AMD Athlon(tm) Processor 2650e
Memory 1812MB (75MB used)

Network controller Broadcom Corporation BCM4312 802.11b/g LP-PHY

My wireless isn't support in beta 3, I had to plug in the ethernet
cable.
I was surprised to see that Nexuiz runs on this laptop, it's actually
playable when the effects are set to the lowest level, google earth
should run too but I haven't tested that yet.
I installed kdegames in ppm and they run okay but no menu entries
showed up in the puppy menu so I start them with gexec.

That's it so far, looks good :)
Attachments
screenshot.jpg
(44.35 KiB) Downloaded 836 times

User avatar
zigbert
Posts: 6621
Joined: Wed 29 Mar 2006, 18:13
Location: Valåmoen, Norway
Contact:

#503 Post by zigbert »

Slacko 5.4 Beta 3 PAE
Not able to connect to internet

sns log file

Code: Select all

Information about this interface:
 Interface: abort
wlan1  Driver: rt73usb  Bus: usb  MacAddress: 
 Description: Ralink RT73 USB Wireless LAN driver. 
 
STEP1a: ifconfig abort
wlan1 up
ifconfig: bad address 'wlan1'
 
*********************************************************
LAST 10 LINES of /var/log/messages:
Nov  7 05:49:18 puppypc5299 user.info kernel: [   20.439948] r8169 0000:05:00.0: eth0: link down
Nov  6 14:49:56 puppypc5299 daemon.info acpid: starting up with proc fs
Nov  6 14:49:56 puppypc5299 daemon.info acpid: 3 rules loaded
Nov  6 14:49:56 puppypc5299 daemon.info acpid: waiting for events: event logging is on
Nov  6 14:49:57 puppypc5299 user.notice powerapplet: Abort, unable to open /proc/acpi/battery
Nov  7 12:57:34 puppypc5299 user.warn kernel: [  521.526408] EXT4-fs (sdb1): warning: maximal mount count reached, running e2fsck is recommended
Nov  7 12:57:35 puppypc5299 user.info kernel: [  521.600652] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Nov  7 12:59:22 puppypc5299 user.warn kernel: [  628.950680] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
Nov  7 12:59:22 puppypc5299 user.info kernel: [  628.950829] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Nov  6 14:59:45 puppypc5299 daemon.err dhcpcd[21034]: dhcpcd not running
Works in Slacko 5.3.3
Is this a known issue, or should I test more. in case yes, What?

I haven't tested much. Only checked some pMusic 3 issues. Will test more, but web connection would lift the general use..... :wink:


Sigmund

Jades
Posts: 466
Joined: Sat 07 Aug 2010, 22:07
Location: Somewhere in Blighty.
Contact:

Problems with Beta 3 on Pentium D machine

#504 Post by Jades »

I've been testing the non-PAE with Opera version of Slacko 5.3.7.0 on my Pentium D 3.4GHz machine and unfortunately I have to report that I'm having major problems with it.

I managed to boot into a pfix=ram session and sound and graphics were working. Network Wizard could see the Netgear WN111v2 USB wireless dongle and I could attempt to set it up, but on scanning for networks there weren't any shown. Frisbee and SNS couldn't see any either. Slacko 5.3.3, on which I am typing this report, usually sees 15 and wireless works perfectly.

While flaky wireless performance was probably not unexpected, given the usual pattern with Slacko betas on this setup, worse was to come with trying to create a save. The problem I've previously noted with 5.3.6.0 being unable to create a working save on my NTFS drive has come back. So far, the only successful new save I've created was on the FAT32 memory card in my Nokia X3-02 (with the phone set to Mass Storage).

I was able to get seemingly successful boots from the NTFS drive by using saves created in previous test builds in Slacko but on these Puppy couldn't see the wireless dongle - the only save which could see it was the newly-created 5.3.7.0 save on the X3-02 although it still can't see any networks.

FWIW, Slacko 5.3.6.5 did have reasonably working wireless in that it worked from bootup, although I still had the problem with the connection dropping out and needing to run wireless setup again to kick it back into life.

All tests were boots from LiveCD.
Zhaan - AMD K6 2 500, 512MB RAM, ATI Rage 128 VR. Full install Wary 5.5 [url=http://tinyurl.com/dy66kh8]HardInfo Report[/url]
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0

Sage
Posts: 5536
Joined: Tue 04 Oct 2005, 08:34
Location: GB

#505 Post by Sage »

Slacko 5.4 Beta 3 4g and PAE versions, devx and kernel source is released.
What excellent taste in default wallpaper! Maybe get on the blower to you know who?!

This frozen mouse issue is a real pain. It has only started appearing in releases in the last few months. Sometimes the suggested fixes work, sometimes just rebooting (without saving!) works, sometimes nothing works. A universal solution seems desirable for both regular testers as well as to avoid frightening off incomers.

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#506 Post by 01micko »

@Billtoo.. did your wireless work in a previous slacko? Next will have the wl driver anyway.

@zigbert.. your problem looks like it is related to assigning wlan1 to the interface, If you only have 1 wireless donge it should be wlan0. I've never seen that one before. I have a dongle that uses ralink usb (rt73) so I can test.

@jades.. it's got to be a firmware issue. I still didn't see your latest dmesg output. Anyway, I have the latest carl9170 firmware and I'll attach. Install it and reboot.

@Sage.. "the bike guy" is back too :wink: .. will need to sort out the mouse issue, it has to be timing if it's intermittent.

EDIT: beta 3 will be reuploaded soon., I'll bump to beta 4 and add deltas

IWCONFIG is broken, this happened to me once before in woof :evil:
Attachments
firmware_linux_module_carl9170-3.1plus.pet
(9.99 KiB) Downloaded 377 times
Puppy Linux Blog - contact me for access

Jades
Posts: 466
Joined: Sat 07 Aug 2010, 22:07
Location: Somewhere in Blighty.
Contact:

#507 Post by Jades »

01micko wrote:@jades.. it's got to be a firmware issue. I still didn't see your latest dmesg output.
Forgot to post it, sorry. Been busy the last few weeks sorting out accounts for a charity. This week, I have a bad cold.
01micko wrote:Anyway, I have the latest carl9170 firmware and I'll attach. Install it and reboot.
Tried it, didn't make a difference. Still can't see any networks. I've attached dmesg output from both Slacko 5.3.3 (on which wireless does work properly) and from Slacko 5.3.7.0 after installing the firmware pet provided and rebooting (save on phone).

Interestingly, other than a brief flash after having disconnected and reconnected the WN111v2 dongle, the light on it has stayed off on 5.3.7.0. It didn't flash at all while I was trying to find a network.

Any thoughts on my not being able to make a save to an NTFS partition?

[Edit: clarified that light staying off comment applied to 5.3.7.0.]
Attachments
dmesgmer5370.txt.gz
Output from dmesg after booting Slacko 5.3.7.0 with Netgear WN111v2 attached, removing it and reinserting.
(14.08 KiB) Downloaded 358 times
dmesgmer533.txt.gz
Output from dmesg after booting Slacko 5.3.3 with Netgear WN111v2 attached.
(11.39 KiB) Downloaded 357 times
Last edited by Jades on Tue 06 Nov 2012, 23:11, edited 1 time in total.
Zhaan - AMD K6 2 500, 512MB RAM, ATI Rage 128 VR. Full install Wary 5.5 [url=http://tinyurl.com/dy66kh8]HardInfo Report[/url]
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#508 Post by 01micko »

Jades, iwconfig is broken, I am rebuilding, I will add deltas and the new carl firmware anyway. Please grab a delta, but it will likely be tomorrow for you.

You can try Barry's wireless-tools from ibiblio in the quirky/wary5 repo if you want.

Thanks
Puppy Linux Blog - contact me for access

Jades
Posts: 466
Joined: Sat 07 Aug 2010, 22:07
Location: Somewhere in Blighty.
Contact:

#509 Post by Jades »

01micko wrote:Jades, iwconfig is broken, I am rebuilding
I didn't know what iwconfig was, had to search for it on Wikipedia. I see why more than one person had reported wireless problems now.
01micko wrote:You can try Barry's wireless-tools from ibiblio in the quirky/wary5 repo if you want.
IIRC the current test build of Wary worked OK with wireless when I tried it last. I don't normally use Wary on Merlin though.
01micko wrote:Thanks
Glad to help.
Zhaan - AMD K6 2 500, 512MB RAM, ATI Rage 128 VR. Full install Wary 5.5 [url=http://tinyurl.com/dy66kh8]HardInfo Report[/url]
Merlin - Core i5-4590, 8GB RAM, Radeon R9 270X. Slacko 5.7.0

User avatar
rerwin
Posts: 2017
Joined: Wed 24 Aug 2005, 22:50
Location: Maine, USA

#510 Post by rerwin »

01micko,
I have used your Frisbee 2.4beta as the basis for my effort to integrate Frisbee into puppy. I discovered an apparent inconsistency in the name of the /etc/init.d/Frisbee initialization script. The main Frisbee script contains :

Code: Select all

eval $RETVALS
if [[ "$EXIT" == "RESTART" ]] ; then 
	/etc/init.d/10-Frisbee stop
	/etc/init.d/10-Frisbee start
	exec Frisbee
fi
I see no such file. Is this code correct?
Richard

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#511 Post by 01micko »

Richard

It's been awhile since I looked at the code, but I am aware that there is no service script. To be honest I didn't thoroughly go through the code at all, I mainly just got rid of the pupcowsay or whatever it was and used gtkdialog-splash. As far as I can remember everything was dealt with in the Startup folder.

I will review my package though, it's quite old. Also, note the package I use in Slacko is "frisbee_special".

Thanks
Puppy Linux Blog - contact me for access

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#512 Post by 01micko »

Beta 4 is out!

As promised there are delta for 4g and PAE from beta 3 which was declared a non-starter. No delta for firefox as there was no beta 3 uploaded for that.
Wireless in all 3 is working on a variety of cards that I have.

See main post
Puppy Linux Blog - contact me for access

User avatar
mavrothal
Posts: 3096
Joined: Mon 24 Aug 2009, 18:23

#513 Post by mavrothal »

01micko wrote:Beta 4 is out!
See main post
Boy,,, you are prolific! :D
Updated 5.3.6.5 to 5.3.7.1 (FF non PAE). No (wired) network, no interface or module to be found! No sound, no kernel modules other than the ones loaded in the init. Reboot, same thing.
Run "depmod -a" and reboot, Bingo! :wink:
You might need to look at your kernel/rc.sysinit
== [url=http://www.catb.org/esr/faqs/smart-questions.html]Here is how to solve your[/url] [url=https://www.chiark.greenend.org.uk/~sgtatham/bugs.html]Linux problems fast[/url] ==

spandey
Posts: 114
Joined: Thu 20 Sep 2012, 14:30
Location: India

#514 Post by spandey »

Sorry if I am asking the obivious, but which iso for FF with PAE ?

User avatar
01micko
Posts: 8741
Joined: Sat 11 Oct 2008, 13:39
Location: qld
Contact:

#515 Post by 01micko »

mavrothal wrote:
01micko wrote:Beta 4 is out!
See main post
Boy,,, you are prolific! :D
Exams are over :)

I'm kinda glad the stupid iwconfig bug was there because it gave me the chance to get opera-12.10 out there. It only takes 30 minutes to reproduce the 3 versions. The worst part is the upload on my crappy bandwidth! (330kbps v .. 100kbps ^)
mavrothal wrote:Updated 5.3.6.5 to 5.3.7.1 (FF non PAE). No (wired) network, no interface or module to be found! No sound, no kernel modules other than the ones loaded in the init. Reboot, same thing.
Run "depmod -a" and reboot, Bingo! :wink:
You might need to look at your kernel/rc.sysinit
Hmmm... I did 2 updates on flash drives, 1 ext3 and 1 FAT and both only needed a reboot, but yeah should work without one, I'll investigate. Again probably a busy-box depmod call which doesn't work, maybe need to update busybox.

-------
spandey wrote:Sorry if I am asking the obivious, but which iso for FF with PAE ?
Sorry mate, didn't build PAE-firefox, only 3 versions. The rationale is that if you have PAE capable then you have decent gear (I don't use it personally, but it's there for the ones with the big RAM) and can afford the extra space to download Firefox. You can get the latest in the repo if you look in the Slackware-patches repo in PPM. That may or may not change for final.
Puppy Linux Blog - contact me for access

Post Reply