Please for the love of god, I beg for help.
I have a USB eGalaxTouch Controller (USB) and I am unable to get it working correctly in Slacko.
This is the driver:
http://home.eeti.com.tw/web20/drivers/t ... L-x.tar.gz
I tried THAT and I got the error:
(E) No /etc/rc.local file found
(E) The driver archive has been removed already.
So..... I then tried this driver (X Window Only)
http://home.eeti.com.tw/web20/drivers/t ... k26.tar.gz
This one sorta works, I do get a touch response but the Calibration Utility 4 Point test does NOT work, it just sits there and won't take a response.
I assume I need evtouch .so drivers but what ones for this version of linux?
How to use eGalaxTouch USB controller in Slacko?
Bitgod:
Welcome to Puppy mate.
You need to give us the exact Puppy Slacko version.
We have a mammoth collection now....OK!
"""""
Slacko - next cycle -alpha...maybe link your post there.
Slacko updated here by 01micko.
http://murga-linux.com/puppy/viewtopic.php?t=80180
A bit hard to see your product.
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
QNX Neutrino RTOS V6.3 >> different to what you describe.
""""""
http://home.eeti.com.tw/web20/URG.html
""""
Ubuntu....read on
http://ubuntuforums.org/showthread.php?p=9254202
" Re: eGalaxTouch touchscreen clicks on second tap
Solved with ubuntu 10.04
[not sure, but it might work with earlier versions.]
Without installing the eGalaxTouch support I got everything working great with default evdev setup in ubuntu 10.04 adding these commands to fix the old problems with rotation / swapped axes. Correct tap behaviour was present out-of-the-box. "
""
" Are you affected by this issue?
Let’s start by saying that the eGalax Touch Screens made by EETI
uses a Touch Resistive Panel Controller
(it can be capacitive but most UMPC and Tablet PC use the
Resistive one) that can be connected using 3 different interfaces:
USB (Hardware ID: USB\VID_0EEF&PID_0001 or
USB\VID_0EEF&PID_0002), RS232 (Hardware ID: SERNUM\EGX5800,
SERNUM\EGX5900, SERNUM\EGX6000, SERNUM\EGX5901 and
SERNUM\EGX5803) and PS/2 (Hardware ID: *PNP0F13). "
http://www.mobilitysite.com/2009/08/ega ... complaint/
""""
Chris.
Welcome to Puppy mate.
You need to give us the exact Puppy Slacko version.
We have a mammoth collection now....OK!
"""""
Slacko - next cycle -alpha...maybe link your post there.
Slacko updated here by 01micko.
http://murga-linux.com/puppy/viewtopic.php?t=80180
A bit hard to see your product.
http://home.eeti.com.tw/web20/eg/Touch_Drives.html
QNX Neutrino RTOS V6.3 >> different to what you describe.
""""""
http://home.eeti.com.tw/web20/URG.html
""""
Ubuntu....read on
http://ubuntuforums.org/showthread.php?p=9254202
" Re: eGalaxTouch touchscreen clicks on second tap
Solved with ubuntu 10.04
[not sure, but it might work with earlier versions.]
Without installing the eGalaxTouch support I got everything working great with default evdev setup in ubuntu 10.04 adding these commands to fix the old problems with rotation / swapped axes. Correct tap behaviour was present out-of-the-box. "
""
" Are you affected by this issue?
Let’s start by saying that the eGalax Touch Screens made by EETI
uses a Touch Resistive Panel Controller
(it can be capacitive but most UMPC and Tablet PC use the
Resistive one) that can be connected using 3 different interfaces:
USB (Hardware ID: USB\VID_0EEF&PID_0001 or
USB\VID_0EEF&PID_0002), RS232 (Hardware ID: SERNUM\EGX5800,
SERNUM\EGX5900, SERNUM\EGX6000, SERNUM\EGX5901 and
SERNUM\EGX5803) and PS/2 (Hardware ID: *PNP0F13). "
http://www.mobilitysite.com/2009/08/ega ... complaint/
""""
Chris.
Slacko and eGalaxTouch
It works fine in Ubuntu, so it's not a controller problem itself.
The Slacko version I have is 5.3.3
The Slacko version I have is 5.3.3