Carolina - 1.3

For talk and support relating specifically to Puppy derivatives
Message
Author
User avatar
Marv
Posts: 1264
Joined: Wed 04 May 2005, 13:47
Location: SW Wisconsin

#1636 Post by Marv »

battleshooter wrote: Hah, 2 years on still learning new things :)
Hah, 2? I'm still trying to at a lot more than that :D The powerapp in the panel does set up a prechosen set of 3 governors. Sounds like some of the choices there didn't work on edocs laptop. The GUI in the control panel has a bit more flexibility so I like to use it. It writes a simple shell script wcpufreq in /etc/init.d. Even more flexibility there. My core 2 duo laptop will only behave with the conservative governor and a 50% threshold while the Pentium Ms are fine with the default ondemand.
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.

User avatar
battleshooter
Posts: 1378
Joined: Wed 14 May 2008, 05:10
Location: Australia

#1637 Post by battleshooter »

Marv wrote:The GUI in the control panel has a bit more flexibility so I like to use it.
Yeah I did find the "3 color" options a bit limited. Really want to see if I can push my sister's laptop to 1.4GHz or bit a bit higher than it's current top frequency of 1.0GHz. In Windows it reaches 1.4GHz, so I figured something is off with the governor in Pups.

It was something on my research to do list, so pretty glad you've just dropped in my lap like that :)
[url=http://www.murga-linux.com/puppy/viewtopic.php?t=94580]LMMS 1.0.2[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94593]Ardour 3.5.389[/url], [url=http://www.murga-linux.com/puppy/viewtopic.php?t=94629]Kdenlive 0.9.8[/url]

User avatar
James C
Posts: 6618
Joined: Thu 26 Mar 2009, 05:12
Location: Kentucky

#1638 Post by James C »

Quick manual frugal install....all looking good.

Code: Select all

# report-video
Carolina, version 1.3 on Thu 18 Dec 2014

Chip description:
 0.0 VGA compatible controller
 nVidia Corporation GT218 [GeForce 210] (rev a2)  
oem: NVIDIA
product: GT218 Board - 08720002 Chip Rev
 
X Server: Xorg
Driver used: nouveau

X.Org version: 1.11.0
  dimensions:    1440x900 pixels (380x238 millimeters)
  depth of root window:    16 planes 

   ...the above also recorded in /tmp/root/ as report-video,
and archived with xorg.conf and Xorg.0.log as report-video-full.gz
# 

Code: Select all

# glxgears
1285 frames in 5.0 seconds = 256.935 FPS
1406 frames in 5.0 seconds = 281.111 FPS
1423 frames in 5.0 seconds = 284.580 FPS
1420 frames in 5.0 seconds = 283.993 FPS
1415 frames in 5.0 seconds = 282.850 FPS
Attachments
Carolina 1.3.jpg
(154.59 KiB) Downloaded 726 times

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#1639 Post by edoc »

For some reason a printer set as default on one computer w/Carolina 1.3 is not showing up on another computer on the same wireless router.

Why might that be, please?

I can connect the printer to the ASUS router - should I go that way?
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#1640 Post by edoc »

How best to set a password in Carolina 1.3?

I tried in Screen Saver & it would no allow me to enter one.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#1641 Post by Geoffrey »

edoc wrote:How best to set a password in Carolina 1.3?

I tried in Screen Saver & it would no allow me to enter one.
The screen saver uses Xlock, to add a new password go to Control Panel > desktop > Screener, uncheck the password box,
then apply, that clears the existing password, recheck the password box and apply again, it will ask for a password.

How did you go with the printer problem, did you enable printer sharing in the main menu > Network > Simple File Sharing Setup.
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#1642 Post by edoc »

It pops up the new password window but refuses to accept any entries. It ignores numbers or text.
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

#1643 Post by Geoffrey »

edoc wrote:It pops up the new password window but refuses to accept any entries. It ignores numbers or text.
It don't show text input, just type then press enter then it should ask to repeat the password which also don't show, enter again and it should be set, works for me like that ok.
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

User avatar
Sky Aisling
Posts: 1368
Joined: Sat 27 Jun 2009, 23:02
Location: Port Townsend, WA. USA

Carolina - 1.3

#1644 Post by Sky Aisling »

edoc wrote:
It pops up the new password window but refuses to accept any entries. It ignores numbers or text.

Geoffrey wrote:
It don't show text input, just type then press enter then it should ask to repeat the password which also don't show, enter again and it should be set, works for me like that ok.
Xlock password is 1 character long then 'enter'.
Last edited by Sky Aisling on Wed 24 Dec 2014, 04:33, edited 1 time in total.

gcmartin

#1645 Post by gcmartin »

On the printer item,
  1. if the printer is a LAN connected printer (wired/wireless), then it is seen by all PCs on the LAN. And setup will be similar or same.
  2. If the printer attaches to the router via USB, then some routers present this a little differently to LAN users.
Which way is the printer connected for LAN user access?

Here to help

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

Re: Carolina - 1.3

#1646 Post by edoc »

Sky Aisling wrote:
edoc wrote:
It pops up the new password window but refuses to accept any entries. It ignores numbers or text.


It don't show text input, just type then press enter then it should ask to repeat the password which also don't show, enter again and it should be set, works for me like that ok.
Xlock password is 1 character long then 'enter'.
Now that "splains" it ... but why such a weak password design?

Thanks!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#1647 Post by edoc »

gcmartin wrote:On the printer item,
  1. if the printer is a LAN connected printer (wired/wireless), then it is seen by all PCs on the LAN. And setup will be similar or same.
  2. If the printer attaches to the router via USB, then some routers present this a little differently to LAN users.
Which way is the printer connected for LAN user access?

Here to help
The printer is connected to the ASUS router via USB.

I can see it in the Tomato OS on the ASUS router.

I'll be home all day tomorrow & Christ-mas, though busy with family some of that time, surely I'll find an opportunity to fix some things and break some others ...

Thanks!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

Re: Carolina - 1.3

#1648 Post by Geoffrey »

edoc wrote:
Sky Aisling wrote:
edoc wrote:
It pops up the new password window but refuses to accept any entries. It ignores numbers or text.


It don't show text input, just type then press enter then it should ask to repeat the password which also don't show, enter again and it should be set, works for me like that ok.
Xlock password is 1 character long then 'enter'.
Now that "splains" it ... but why such a weak password design?

Thanks!
That's not correct, it's not just 1 character long, the password can be a sentence if you like.

Example: at the "key:" prompt type "the quick brown fox jumps over the lazy dog", you won't be able to see what your typing, press the enter key, at the "Again:" prompt repeat the password and then press the enter key again, the password is now set, to unlock you will need to type "the quick brown fox jumps over the lazy dog"

The password is stored in a encrypted format in /root/.xlockrc
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

gcmartin

#1649 Post by gcmartin »

Hello @Edoc
edoc wrote:... The printer is connected to the ASUS router via USB ...
Printer
In Win7/Win8 there is a wonderful facility which shows all printers found within your home LAN's subnet. If you have this running, open explorer to your Printer and look for its name to be listed as having the same IP as your router.

You "may" need to load the actual printer's driver, but, Microsoft "my" already have it. If not, you may be able to use a generic printer driver (HP III, for example) from Windows.

In Carolina
Knowing this IP address and printer name allows you to open a browser URL to http://localhost:631 where you can set up your PUP to print to the router's printer.

Here to help

User avatar
edoc
Posts: 4729
Joined: Sun 07 Aug 2005, 20:16
Location: Southeast Georgia, USA
Contact:

#1650 Post by edoc »

I think that I'm not being sufficiently concise.

I can see and print to the printer, which is connected to the router, from any of the Linux computers here.

I have made no attempt to print from a computer booted with a MS version of windows as I almost never use anything from MS & our son who does has not made the time to try - he sneaker-nets school-related documents via a USB stick to a Linux computer.

What I cannot do is to print to the Brother printer wirelessly from an Android device.

This is supposed to be handled by an Android app made available by Brother but it's not working in my case - their app fails to find the printer - I believe it to be a flaw in their app but they've yet to reply to my inquiry.

Thanks for helping!
[b]Thanks! David[/b]
[i]Home page: [/i][url]http://nevils-station.com[/url]
[i]Don't google[/i] [b]Search![/b] [url]http://duckduckgo.com[/url]
TahrPup64 & Lighthouse64-b602 & JL64-603

User avatar
rcrsn51
Posts: 13096
Joined: Tue 05 Sep 2006, 13:50
Location: Stratford, Ontario

#1651 Post by rcrsn51 »

edoc wrote:What I cannot do is to print to the Brother printer wirelessly from an Android device.

This is supposed to be handled by an Android app made available by Brother but it's not working in my case - their app fails to find the printer - I believe it to be a flaw in their app but they've yet to reply to my inquiry.
I have already explained the situation here. You need to disconnect the printer from the router and use its own networking features - wired or wireless. This would also require that you reinstall the printer in your Puppy clients through CUPS.

Also, turn off sharing in your Puppy CUPS setups. You don't need it anymore.

Terry H
Posts: 708
Joined: Sun 29 Mar 2009, 16:48
Location: The Heart of Muskoka, ON Canada

#1652 Post by Terry H »

edoc wrote:
What I cannot do is to print to the Brother printer wirelessly from an Android device.
I have a brother 7860DW wifi enabled multifunction printer. The easiest printing I have ever set up and used is by using the Brother print and scan app. It is working on 4 android tablet/smart phones here.

buckaroo50
Posts: 29
Joined: Fri 25 Feb 2011, 07:08

UFRAW

#1653 Post by buckaroo50 »

I found that UFRAW-0.20 is missing a lib file and does not work with GIMP but UFRAW-0.18 works fine and is not missing any lib files or dependencies...

Anyone else find this to be true?

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

Re: UFRAW

#1654 Post by Geoffrey »

buckaroo50 wrote:I found that UFRAW-0.20 is missing a lib file and does not work with GIMP but UFRAW-0.18 works fine and is not missing any lib files or dependencies...

Anyone else find this to be true?
What lib file does it say is missing?

UFRAW-0.20 works ok for me, when installed from ppm, it also downloads dependencies gtkimageview-1.6.3 and lensfun-0.2.8.

If installed without Gimp being present then it will have these missing library files
libgimpui-2.0.so.0
libgimpwidgets-2.0.so.0
libgimpmodule-2.0.so.0
libgimp-2.0.so.0
libgimpmath-2.0.so.0
libgimpconfig-2.0.so.0
libgimpcolor-2.0.so.0
libgimpbase-2.0.so.0
UFRAW-0.20 installs gimp plugin:

Code: Select all

/usr/lib/gimp/2.0/plug-ins/ufraw-gimp
Opening a raw image with gimp then runs ufraw which in turn loads the image in gimp when OK is selected.

UFRAW has no menu entry, if run from the terminal it give the option to open a raw file, the image can be edited and saved or opened with gimp.

Here's a menu entry for those that would like one, extract it to /usr/share/applications.
Attachments
ufraw.desktop.gz
(185 Bytes) Downloaded 346 times
ufraw-0.20-3.jpg
ufraw as a standalone app.
(77.64 KiB) Downloaded 796 times
ufraw-0.20-2.jpg
ufraw as a gimp plugin
(70.98 KiB) Downloaded 778 times
ufraw-0.20.jpg
ufraw as a gimp plugin
(65.67 KiB) Downloaded 785 times
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

User avatar
Geoffrey
Posts: 2355
Joined: Sun 30 May 2010, 08:42
Location: Queensland

animwall_desktop_widget-1.0

#1655 Post by Geoffrey »

Animwall Desktop Widget, a small app that will create a animated gif desktop widget.

It serves no real purpose, it's just a desktop toy.

Select a small file size animated gif of appropriate dimensions, 256 colors or less would be best, as it can be CPU hungry.

it layers itself over the desktop so makes desktop icons and right-click menus inaccessible, use it as a wallpaper if a none active desktop is acceptable.

To use select an animated gif, this will resize the gif to desktop dimensions and a preview image using "gifsicle".

Selecting "Start" will create a script /root/Startup/anim_wall and runs the script, the widget will continue to run at startup.

Selecting "Stop" kills the process and removes anim_wall from /root/Startup.

Use in conjunction with an existing wallpaper and the widget with opacity, Cairo Dock or any other launcher could be used to make it look cool.

pet installs menu entry to Control Panel > Desktop > Animwall Desktop Widget

Here's a few gifs to try, right click image, Save Link As...

ImageImage Image
Attachments
animwall_desktop_widget-1.0.pet
(2.03 KiB) Downloaded 312 times
animwall.jpg
(121.5 KiB) Downloaded 744 times
Last edited by Geoffrey on Mon 18 Dec 2017, 05:34, edited 3 times in total.
[b]Carolina:[/b] [url=http://smokey01.com/carolina/pages/recent-repo.html]Recent Repository Additions[/url]
[img]https://dl.dropboxusercontent.com/s/ahfade8q4def1lq/signbot.gif[/img]

Post Reply