Carolina - 1.3
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
After several check and "cut and try" operations I found the reason of problem.
The main reson was a setup in monitor/tv, I t was about a "stretching" of image, a sort of little extra landscape effect.
After the reset of this effect, I also have had to find the best compromise for resolution, because 1920x1080 shows too little icons and fonts and then now it seems good at 1200x720.
I don't know if this is due to monitor/tv feature, graphic chipset, Puppy or whatsoever (or a combination of that), however now the result is acceptable.
Something is still not ok, in my opinion... I tried the game GLBilliard, it starts well, etc... but when I quit it, the desktop is "shrinked" and I have had to exit and restart with xwin... I'll check for these behavior
The main reson was a setup in monitor/tv, I t was about a "stretching" of image, a sort of little extra landscape effect.
After the reset of this effect, I also have had to find the best compromise for resolution, because 1920x1080 shows too little icons and fonts and then now it seems good at 1200x720.
I don't know if this is due to monitor/tv feature, graphic chipset, Puppy or whatsoever (or a combination of that), however now the result is acceptable.
Something is still not ok, in my opinion... I tried the game GLBilliard, it starts well, etc... but when I quit it, the desktop is "shrinked" and I have had to exit and restart with xwin... I'll check for these behavior
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
I would have two question...
The first is about acpitool.
My pc (Foxconn nt330i) is always conneted to mains power supply and, since it isn't a netbook, it hasn't battery and lcd screen.
Acpitool remains always in "powersave mode" and if I set it in "Turbo mode" at the next boot it returns in "Powersave".
Having a look at frequency scaling tool it seems that, however, the frequency of cpu is always the same (1.6GHz).
I must say I don't know these tools but I didn't find a clear description about.
The above points are due to my attempt to increase as much as possible the graphic performance (nVIDIA MCP7A-ION chipset, 512MB ram, shared type).
The installation of nVIDIA driver has been a bit better but sometimes in some video (e.g. YouTube) some flickering happen.
I reduced the resolution from 1920x1080 to 1280x720, I look at that videos in a lower quality (say, 360 instead of 480) but something still remains.
OK... OK... of course, it could be caused by speed of connection on web but my feel is that there could be "something" to improve
The hw seems good enough (CPU Atom 330i dual core 1.6GHz, 4GB ram) so I don't think that Carolina/XFCE represent an "heavy load" and to speak frankly I would prefer to keep XFCE (or maybe LXDE).
Any suggestion will be wellcome !
The first is about acpitool.
My pc (Foxconn nt330i) is always conneted to mains power supply and, since it isn't a netbook, it hasn't battery and lcd screen.
Acpitool remains always in "powersave mode" and if I set it in "Turbo mode" at the next boot it returns in "Powersave".
Having a look at frequency scaling tool it seems that, however, the frequency of cpu is always the same (1.6GHz).
I must say I don't know these tools but I didn't find a clear description about.
The above points are due to my attempt to increase as much as possible the graphic performance (nVIDIA MCP7A-ION chipset, 512MB ram, shared type).
The installation of nVIDIA driver has been a bit better but sometimes in some video (e.g. YouTube) some flickering happen.
I reduced the resolution from 1920x1080 to 1280x720, I look at that videos in a lower quality (say, 360 instead of 480) but something still remains.
OK... OK... of course, it could be caused by speed of connection on web but my feel is that there could be "something" to improve
The hw seems good enough (CPU Atom 330i dual core 1.6GHz, 4GB ram) so I don't think that Carolina/XFCE represent an "heavy load" and to speak frankly I would prefer to keep XFCE (or maybe LXDE).
Any suggestion will be wellcome !
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
If you want turbo mode always on then backup /root/Startup/9acpid and replace with this one.
- Attachments
-
- 9acpid.gz
- (71 Bytes) Downloaded 250 times
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
Hi rg66,
Thank you very much for Your prompt reply and many thanks also for the file, I'll try it
But, just for my knowledge, what are the explanation for the behavior of acpitool I've seen? Why does it always stay in state?
And could it be the reason of some slowdown in graphics?
Last but not least, if I use Your file there is no more need of keep acpitool installed...
I'm sorry for these extra questions, but I would like to understand more if possible and I didn't find something of clear understanding (at least, for me... )
Thank you very much for Your prompt reply and many thanks also for the file, I'll try it
But, just for my knowledge, what are the explanation for the behavior of acpitool I've seen? Why does it always stay in state?
And could it be the reason of some slowdown in graphics?
Last but not least, if I use Your file there is no more need of keep acpitool installed...
I'm sorry for these extra questions, but I would like to understand more if possible and I didn't find something of clear understanding (at least, for me... )
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
HELP !
Today I started Carolina and everything seemed ok, but Fiefox doesn't run
The Internet connection is ok, I tried e.g. to update repos and then I see that it's ok then it's only about Firefox...
Launching firefox from terminal it says
XPCOMGlueLoaderror for file /usr/lib/firefox/libxpcom.so:
libxul.so: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
I didn't do anything of strange, after the installation I only turn on the pc, surf on web and then I switch off (with the command icon, of course).
I don't know how it's happen but, in every case... what can I do? Should I reinstall Firefox? In this case, what is the right procedure?
It isn't available in Package manager...
I'm very sad... please, help me...
Today I started Carolina and everything seemed ok, but Fiefox doesn't run
The Internet connection is ok, I tried e.g. to update repos and then I see that it's ok then it's only about Firefox...
Launching firefox from terminal it says
XPCOMGlueLoaderror for file /usr/lib/firefox/libxpcom.so:
libxul.so: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
I didn't do anything of strange, after the installation I only turn on the pc, surf on web and then I switch off (with the command icon, of course).
I don't know how it's happen but, in every case... what can I do? Should I reinstall Firefox? In this case, what is the right procedure?
It isn't available in Package manager...
I'm very sad... please, help me...
Hi inoxidabile,inoxidabile wrote:HELP !
Today I started Carolina and everything seemed ok, but Fiefox doesn't run
The Internet connection is ok, I tried e.g. to update repos and then I see that it's ok then it's only about Firefox...
Launching firefox from terminal it says
XPCOMGlueLoaderror for file /usr/lib/firefox/libxpcom.so:
libxul.so: cannot open shared object file: No such file or directory
Couldn't load XPCOM.
I didn't do anything of strange, after the installation I only turn on the pc, surf on web and then I switch off (with the command icon, of course).
I don't know how it's happen but, in every case... what can I do? Should I reinstall Firefox? In this case, what is the right procedure?
It isn't available in Package manager...
I'm very sad... please, help me...
Due to the fact that Carolina uses glibc-2.10, Firefox-18.0 won't run on it. If you've updated Firefox from the browser's 'About' menu entry, it will fail when subsequently trying to run it. Firefox-16.01 is in the PPM; you could try reinstalling it, and if that doesn't do the trick you may need to delete your save file and start fresh.
-
- Posts: 902
- Joined: Mon 22 Jun 2009, 01:36
- Location: Philadelphia, PA
Firefox problem
Probably the fillowing will not be of help?elroy wrote:Hi inoxidabile,inoxidabile wrote:HELP !
Today I started Carolina and everything seemed ok, but Fiefox doesn't run.
Due to the fact that Carolina uses glibc-2.10, Firefox-18.0 won't run on it.
I just booted lina-lite, and see that Opera is version 12.02; it's "mounted" via /mnt/home/opera-12.02-1578.i386.opt.sfs
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
Hi elroy,
first of all, thank You very much for Your quick answer.
I'm blind, now I find firefox in PPM, I was looking for it in pet and not in sfs...
Anyway, The trick of reinstall doesn't solve the problem and then I think it's better to start fresh as You suggested.
But, please, believe me, I didn't upgrade ...
Update: exactly now my daughter are telling me that, after opening firefox, it started an upgrade but without asking for a confirmation...
Is it possible that the update starts automatically? if it's true, it would be a problem...
I don't know if her tales is true or not, however, I will install all as fresh and new and I'll tell You if it will happen again.
I tried also to install Opera but it seems to have some little bug... To speak frankly, I didn't go on to check Opera because I don't like it
However it will be, thanks once again
Just an other point: in PPM there are four repos available but in the update windows there are five, because there is also puppy-4
Hi sheldonisaac, thanks for Your suggestion, it isn't clear for me Your suggestion but I prefer to "start fresh", I don't know what happened today on pc during my absence...
first of all, thank You very much for Your quick answer.
I'm blind, now I find firefox in PPM, I was looking for it in pet and not in sfs...
Anyway, The trick of reinstall doesn't solve the problem and then I think it's better to start fresh as You suggested.
But, please, believe me, I didn't upgrade ...
Update: exactly now my daughter are telling me that, after opening firefox, it started an upgrade but without asking for a confirmation...
Is it possible that the update starts automatically? if it's true, it would be a problem...
I don't know if her tales is true or not, however, I will install all as fresh and new and I'll tell You if it will happen again.
I tried also to install Opera but it seems to have some little bug... To speak frankly, I didn't go on to check Opera because I don't like it
However it will be, thanks once again
Just an other point: in PPM there are four repos available but in the update windows there are five, because there is also puppy-4
Hi sheldonisaac, thanks for Your suggestion, it isn't clear for me Your suggestion but I prefer to "start fresh", I don't know what happened today on pc during my absence...
Hi inoxidabile,inoxidabile wrote:Hi elroy,
first of all, thank You very much for Your quick answer.
I'm blind, now I find firefox in PPM, I was looking for it in pet and not in sfs...
Anyway, The trick of reinstall doesn't solve the problem and then I think it's better to start fresh as You suggested.
But, please, believe me, I didn't upgrade ...
Update: exactly now my daughter are telling me that, after opening firefox, it started an upgrade but without asking for a confirmation...
Is it possible that the update starts automatically? if it's true, it would be a problem...
I don't know if her tales is true or not, however, I will install all as fresh and new and I'll tell You if it will happen again.
I tried also to install Opera but it seems to have some little bug... To speak frankly, I didn't go on to check Opera because I don't like it
However it will be, thanks once again
Just an other point: in PPM there are four repos available but in the update windows there are five, because there is also puppy-4
Hi sheldonisaac, thanks for Your suggestion, it isn't clear for me Your suggestion but I prefer to "start fresh", I don't know what happened today on pc during my absence...
The only way that Firefox will 'auto-update' is if someone were to click on (from within the Firefox browser) 'Help' --> 'About Firefox'. Firefox would then auto-update to the latest version which currently won't run on Carolina due to the use of libc-2.10. If done in this manner, Firefox would not ask for conformation before beginning the update process.
EDIT: This is of no fault of your own, or your daughter...at the time of the Carolina-005 release, we felt that this would be beneficial. But in hind-sight, it didn't work out as such. To the contrary, I apologize for the fact that you'll need to delete your save file and start fresh.
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
Hi elroy,
thank You for the explanations about Firefox.
I tried some Puppy derivatives prior to install, I liked the concept of a "Saluki-ready to use" and its performances, behavior, etc. fit my need.
Nothing is perfect, of course, so I'll reinstall Carolina because I still like it and, please, no need of any apologies... I had a problem and You answered me quickly, then it's ok for me.
So, thanks again to You... I've seen there is a remaster tool, maybe after the next install, I'll make my personalized copy - just in case...
thank You for the explanations about Firefox.
I tried some Puppy derivatives prior to install, I liked the concept of a "Saluki-ready to use" and its performances, behavior, etc. fit my need.
Nothing is perfect, of course, so I'll reinstall Carolina because I still like it and, please, no need of any apologies... I had a problem and You answered me quickly, then it's ok for me.
So, thanks again to You... I've seen there is a remaster tool, maybe after the next install, I'll make my personalized copy - just in case...
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
Hi elroy, I made a new fresh install and now everything is fine.
After some experience I did in these past days, I would send some notes, hoping they will be useful for others and for improvements in future release.
Anyway, this is the list of the point I found till now:
- Starting from CD, the first row at bottom of screen isn't visible (I remembered that F3 shows a normal text white on black and then I did in this way).
- A couple of messages during boot (on a frugal install type) say "filesystem=ext2fs partition type 083"... it seems strange, because all the drive has been formatted as ext3 and also the save file has been choosed on ext3.
- Certain apps takes about five seconds to start (e.g. Firefox) but there isn't any signal indicating that it's loading. The same happens at shutdown, it takes some time, while nothing happens and then there is the temptation to think "what's happening wrong?"
- In the update of repos there is also puppy4 but it isn't present in the pet list in PPM. Moreover, if the Saluki (and maybe other...) package are compatible, why they aren't available in PPM?
- In remastering tool (let me say it's a great tool! ) it could be wise to suggest to not use the root-home because, if the size of personal file is small the system could have problems.
- The acpitool remains in powersave even if not needed, could it be corrected or the only way is as suggested in a post by rg66 ? (that's equal to not have it).
-A question: how can I have a screensaver (just to avoid the blank screen after some time of inactivity) but without setup password?
Lastly, there is the topic I've seen about Firefox, a corruption or a variation could require a fresh install, maybe it could be able to happen to other programs.
Please, I would like to underline once again that Carolina is still the better for my needs as I said in my previous post and then I installed it again.
After some experience I did in these past days, I would send some notes, hoping they will be useful for others and for improvements in future release.
Anyway, this is the list of the point I found till now:
- Starting from CD, the first row at bottom of screen isn't visible (I remembered that F3 shows a normal text white on black and then I did in this way).
- A couple of messages during boot (on a frugal install type) say "filesystem=ext2fs partition type 083"... it seems strange, because all the drive has been formatted as ext3 and also the save file has been choosed on ext3.
- Certain apps takes about five seconds to start (e.g. Firefox) but there isn't any signal indicating that it's loading. The same happens at shutdown, it takes some time, while nothing happens and then there is the temptation to think "what's happening wrong?"
- In the update of repos there is also puppy4 but it isn't present in the pet list in PPM. Moreover, if the Saluki (and maybe other...) package are compatible, why they aren't available in PPM?
- In remastering tool (let me say it's a great tool! ) it could be wise to suggest to not use the root-home because, if the size of personal file is small the system could have problems.
- The acpitool remains in powersave even if not needed, could it be corrected or the only way is as suggested in a post by rg66 ? (that's equal to not have it).
-A question: how can I have a screensaver (just to avoid the blank screen after some time of inactivity) but without setup password?
Lastly, there is the topic I've seen about Firefox, a corruption or a variation could require a fresh install, maybe it could be able to happen to other programs.
Please, I would like to underline once again that Carolina is still the better for my needs as I said in my previous post and then I installed it again.
Ok, let's take on your questions one at a time...
Can't speak to this since I've never experienced it on my setup.inoxidabile wrote:- Starting from CD, the first row at bottom of screen isn't visible (I remembered that F3 shows a normal text white on black and then I did in this way).
Carolina has been developed on ext4. I don't know if using it will fix the issue, but it's worth a try.inoxidabile wrote:- A couple of messages during boot (on a frugal install type) say "filesystem=ext2fs partition type 083"... it seems strange, because all the drive has been formatted as ext3 and also the save file has been choosed on ext3.
I'll keep this in mind moving forward. Carolina is a bit of a pig; because of it's size, it's a bit sluggish by Puppy standards. Perhaps in future versions, I'll add notifications for longer-starting apps.inoxidabile wrote:- Certain apps takes about five seconds to start (e.g. Firefox) but there isn't any signal indicating that it's loading. The same happens at shutdown, it takes some time, while nothing happens and then there is the temptation to think "what's happening wrong?"
The Saluki packages are included in the Carolina repo, along with many other pet additions not available in the Saluki repo. The reason that the Saluki repo isn't offered is because of this, and due to the fact that some of the pets offered in the Saluki repo have been modified to work with Carolina. In short, the Carolina repo includes all of Saluki's, and then some, modified to work with Carolina. As far as Puppy4 packages are concerned, at one time a user could enter the PPM configuration and choose which repo's they'd like displayed (5 repos max). Somehow, that got lost in the transition. I'll have to look into that; the ability to choose the Puppy4 repose should be available, but obviously at present it is not.inoxidabile wrote:- In the update of repos there is also puppy4 but it isn't present in the pet list in PPM. Moreover, if the Saluki (and maybe other...) package are compatible, why they aren't available in PPM?
If you're refering to the 'custom-builder' tool, yes, it's the bomb. It's very flexible, and even allows for swapping out the kernel. Again, in future releases, I'll keep in mind your advice.inoxidabile wrote:- In remastering tool (let me say it's a great tool! ) it could be wise to suggest to not use the root-home because, if the size of personal file is small the system could have problems.
The Carolina acpitool is currently configured to default to powersave on laptops with no ac-power, and turbo otherwise; however, it should be configurable if using ac-power. Perhaps you need to enable the correct driver using the Control Panel-->Hardware-->CPU Frequency Scaling Tool. You may have to do a Google search to find the correct driver to use for your setup, but it should be adjustable.inoxidabile wrote:- The acpitool remains in powersave even if not needed, could it be corrected or the only way is as suggested in a post by rg66 ? (that's equal to not have it).
Honestly, I cannot answer this question due to the fact that I don't use a screensaver. The underlying workings are the same as they would be with Saluki - in otherwords, concerning a screensaver, nothing should've changed from Saluki to Carolina. Hopefully someone more clued-up on this subject can contribute to this thread concerning this matter. As far as other applications trying to update, as far as we know, Firefox is the only one that does so.inoxidabile wrote:-A question: how can I have a screensaver (just to avoid the blank screen after some time of inactivity) but without setup password?
Lastly, there is the topic I've seen about Firefox, a corruption or a variation could require a fresh install, maybe it could be able to happen to other programs.
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
Hi elroy,
thank You for the answer and related explanations (and Your patience for this ! )
notifications for long starting apps
Please, don't worry, this absence isn't a problem only on Carolina...
ext2 messages
All is functioning well and then it's ok, so by my side I consider it as a "nice thing" and nothing more...
acpitool
I believed that setting it as "turbo", it remains in this way, but it reverts to powersave at every boot.
OK, I'll have a look to frequency scaling tool... if I remember well, the value was right yet, the setting is at the max available for the cpu.
screensaver
My question is due this behavior... after some time of inactivity the screen becomes black to be honest, I don't know why, maybe it's some other strange setup in monitor/tv... I'll look better to find the cause
Finally, thanks to You and the others involved in Carolina/Saluki for the graeat job done
thank You for the answer and related explanations (and Your patience for this ! )
notifications for long starting apps
Please, don't worry, this absence isn't a problem only on Carolina...
ext2 messages
All is functioning well and then it's ok, so by my side I consider it as a "nice thing" and nothing more...
acpitool
I believed that setting it as "turbo", it remains in this way, but it reverts to powersave at every boot.
OK, I'll have a look to frequency scaling tool... if I remember well, the value was right yet, the setting is at the max available for the cpu.
screensaver
My question is due this behavior... after some time of inactivity the screen becomes black to be honest, I don't know why, maybe it's some other strange setup in monitor/tv... I'll look better to find the cause
Finally, thanks to You and the others involved in Carolina/Saluki for the graeat job done
I converted Extract-pet and Bulldog finder
so they would show in right click menu rather than SendTo menu.
.
so they would show in right click menu rather than SendTo menu.
.
Carolina - 0.0.6-rc
The release candidate for Carolina, version 006-rc, is available in the repo. See the first post of this thread for the download link.
hey elroy
running smoothly on initial install to lenovo t61
correctly configured display, sound and ethernet, downloaded a few sample progs from ppm
looks really nice
**edit - clicking *.xls file did not open spreadsheet, able to open from libre calc ok though **
running smoothly on initial install to lenovo t61
correctly configured display, sound and ethernet, downloaded a few sample progs from ppm
looks really nice
**edit - clicking *.xls file did not open spreadsheet, able to open from libre calc ok though **
Last edited by ally on Fri 22 Mar 2013, 13:58, edited 2 times in total.
- inoxidabile
- Posts: 148
- Joined: Sat 13 Sep 2008, 12:37
- rg66
- Posts: 1158
- Joined: Mon 23 Jul 2012, 05:53
- Location: Vancouver, BC Canada / Entebbe, Uganda Africa!?!
Go to the first post and click the 006-rc link, either download the complete ISO or get lina-005.iso___lina-006-rc.iso.delta and use xdelta from utilities with the delta and the 005 ISO to generate the new one.inoxidabile wrote:Hi elroy, Could You kindly suggest me how to try the new (and future) release?
Thank You in advance!
X-slacko-5b1 - X-tahr-2.0 - X-precise-2.4
[url=http://smokey01.com/rg66/]X-series repo[/url]
[url=http://smokey01.com/rg66/]X-series repo[/url]
Clementine
Clementine seg faulted
will try another download
will try another download
Re: Clementine
Thanks for bringing this to my attention. I don't think it's your ISO download that's bad; I got the segfault, too. I re-installed the Clementine pet from the repo and that fixed the issue - it ran as expected. Why it segfaults from the ISO isn't known at present, but that will be addressed for the next release. In the meantime the simple fix is to re-install Clementine from the repo.GoneSouth wrote:Clementine seg faulted
will try another download