Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Mon 22 Dec 2014, 23:02
All times are UTC - 4
 Forum index » House Training » Beginners Help ( Start Here)
build: no such file or directory
Moderators: Flash, Ian, JohnMurga
Post new topic   Reply to topic View previous topic :: View next topic
Page 1 of 1 [14 Posts]  
Author Message
cathawk

Joined: 14 Oct 2012
Posts: 6

PostPosted: Sun 14 Oct 2012, 08:39    Post subject:  build: no such file or directory
Subject description: trying to compile drivers for usb wireless network adaptor
 

New to puppy. I've got wary puppy 5.3 installed but need internet access. Found driver files for my edimax usb wireless adaptor which needed 'make' command. Loaded dev_x_wary_5.3.sfs and now have 'make' command but during execution returns error "/lib/modules/2.6.32.59/build: No such file or directory". The /lib/modules/2.6.32.59 directory exists, just no 'build'. Now I'm stuck, can someone help me?
Back to top
View user's profile Send private message 
Semme

Joined: 07 Aug 2011
Posts: 4139
Location: World_Hub

PostPosted: Sun 14 Oct 2012, 09:13    Post subject:  

Hello Cathawk- Welcome!

In order to compile drivers, you need the *kernel* src as well.. http://bkhome.org/sources/
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9376
Location: Stratford, Ontario

PostPosted: Sun 14 Oct 2012, 09:43    Post subject:  

As a first step, you need to determine the [vendor:product] ID codes for your adapter. With the device unplugged, run the command "lsusb". Then plug it in and run "lsusb" again. Report back.

Where did you get the driver files?
Back to top
View user's profile Send private message 
cathawk

Joined: 14 Oct 2012
Posts: 6

PostPosted: Sun 14 Oct 2012, 14:11    Post subject:  

Thanks for helping!
http://bkhome.org/sources/ link wants a username/password. Tried mine for this forum but didn't work.
Driver files came from manufacterer edimax.
Back to top
View user's profile Send private message 
SFR


Joined: 26 Oct 2011
Posts: 1120

PostPosted: Sun 14 Oct 2012, 14:50    Post subject:  

cathawk wrote:
http://bkhome.org/sources/ link wants a username/password. Tried mine for this forum but didn't work.

Username: puppy
Password: linux

Greetings!

_________________
[O]bdurate [R]ules [D]estroy [E]nthusiastic [R]ebels => [C]reative [H]umans [A]lways [O]pen [S]ource
Omnia mea mecum porto.
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9376
Location: Stratford, Ontario

PostPosted: Sun 14 Oct 2012, 14:56    Post subject:  

cathawk wrote:
http://bkhome.org/sources/ link wants a username/password. Tried mine for this forum but didn't work.

Use puppy/linux. But the kernel sources you need aren't there. Go here.

However, your install instructions may not be appropriate for Puppy. That's why I need more information.

1. the [vendor:product] ID codes.
2. the model name
3. A link to the driver files.
Back to top
View user's profile Send private message 
cathawk

Joined: 14 Oct 2012
Posts: 6

PostPosted: Mon 15 Oct 2012, 08:17    Post subject:  

rcrsn51, here is all the info, it looks like your link to sfs file will load just like dev_x so I won't need to manually compile kernel?

lsusb says "Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 7392:7811"
The first line shows without device inserted and repeats after.

Adapter is Edimax EW-7811Un.

link to driver files: http://www.edimax.com/en/support_detail.php?pd_id=347&pl1_id=1&pl2_id=44

Their instructions when you unzip and view powerpoint doc file:
(1) step1: uncompress the “rtl8192cu_linux_v2.0.xxxx.2010xxxx.tar.g z” file. (in “driver” directory)
> tar zxvf rtl8192CU_linux_v2.0. 939.20100726.tar.gz
(2) step2: make 8192C USB driver module
> make
(3) step3: clean the operation environment
> ./clean
(4) step4: insert 8192C USB modules
> insmod 8192cu.ko
(5) step5: enable wlan0 interface
> ifconfig wlan0 up
(6) step6: setup IP address
> ifconfig wlan0 192.168.1.100

Part 2: Site Survey & connect to AP without security
step1: Site Survey
> iwlist wlan0 scan
(2) step2: Connect to AP
> iwconfig wlan0 essid “xxx”
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9376
Location: Stratford, Ontario

PostPosted: Mon 15 Oct 2012, 10:24    Post subject:  

cathawk wrote:
so I won't need to manually compile kernel?

You just copy the driver's source folder into /usr/src/linux and "make" it there.

I have built a PET for Wary 5.3. When you run the Network Wizard > Load Modules, you should now see 8192cu.
rtl8192CU_k2.6.32.59-2.0.939.pet
Description 
pet

 Download 
Filename  rtl8192CU_k2.6.32.59-2.0.939.pet 
Filesize  142.78 KB 
Downloaded  343 Time(s) 
Back to top
View user's profile Send private message 
cathawk

Joined: 14 Oct 2012
Posts: 6

PostPosted: Mon 15 Oct 2012, 11:23    Post subject:  

Thanks so much for helping, but I'm confused. It looks like the PET file you kindly supplied installs my drivers. Network wizard found 8192cu and I loaded it but the "New module loaded" window says 'new module has been loaded:8192cu
No new interfaces detected.
Click the 'Unload' button....try to load another one.' Also of note, the light on the adapter is not on. Help....
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9376
Location: Stratford, Ontario

PostPosted: Mon 15 Oct 2012, 11:49    Post subject:  

Unplug and replug the device.

Run "dmesg" and see if there are any messages about it.

Run "lsmod". Are there any modules named "r8192s_usb or "ieee*" being loaded? If so, run
Code:
rmmod r8192s_usb
rmmod ieee80211_rsl
rmmod ieee80211_crypt_ccmp
rmmod ieee80211_crypt_tkip
rmmod ieee80211_crypt_wep
rmmod ieee80211_crypt
rmmod 8192cu

modprobe 8192cu

Unplug\replug and run
Code:
ifconfig -a

Do you get a wlan0 interface?
Back to top
View user's profile Send private message 
cathawk

Joined: 14 Oct 2012
Posts: 6

PostPosted: Tue 16 Oct 2012, 07:50    Post subject:  

Sorry it's taking me so long, but I'm still learning EVERYTHING. Just figured out how to copy console output to file, then must transfer to keydriver to computer with internet access. Here are all of my outputs...
About half way down dsmesg says 'modprobe: page allocation failure. order:3, mode:0x20', similiar msg further down. See bottom, Bash didn't find 'rnmod' but I ran other commands in case it tells you something important.


# dmesg
Linux version 2.6.32.59 (root@puppypc) (gcc version 4.3.4 (GCC) ) #1 Mon Apr 2 19:19:10 GMT-8 2012
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ea800 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI 2.1 present.
last_pfn = 0x8000 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DBFFF uncachable
DC000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FF8000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-0000000008000000
0000000000 - 0000400000 page 4k
0000400000 - 0008000000 page 2M
kernel direct mapping tables up to 8000000 @ 7000-b000
RAMDISK: 07cfc000 - 07fdfd17
ACPI Error: A valid RSDP was not found (20090903/tbxfroot-219)
0MB HIGHMEM available.
128MB LOWMEM available.
mapped low ram: 0 - 08000000
low ram: 0 - 08000000
node 0 low ram: 00000000 - 08000000
node 0 bootmap 00001000 - 00002000
(6 early reservations) ==> bootmem [0000000000 - 0008000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 000146a498] TEXT DATA BSS ==> [0001000000 - 000146a498]
#2 [0007cfc000 - 0007fdfd17] RAMDISK ==> [0007cfc000 - 0007fdfd17]
#3 [000009f400 - 0000100000] BIOS reserved ==> [000009f400 - 0000100000]
#4 [000146b000 - 00014710fc] BRK ==> [000146b000 - 00014710fc]
#5 [0000001000 - 0000002000] BOOTMAP ==> [0000001000 - 0000002000]
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00008000
HighMem 0x00008000 -> 0x00008000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00008000
On node 0 totalpages: 32671
free_area_init_node: node 0, pgdat c13e58b4, node_mem_map c1473000
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 224 pages used for memmap
Normal zone: 28448 pages, LIFO batch:7
Using APIC driver default
SFI: Simple Firmware Interface v0.7 http://simplefirmware.org
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
nr_irqs_gsi: 16
Allocating PCI resources starting at 8000000 (gap: 8000000:f7f80000)
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32415
Kernel command line: initrd=initrd.gz pmedia=cd BOOT_IMAGE=vmlinuz
PID hash table entries: 512 (order: -1, 2048 bytes)
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 121872k/131072k available (2722k kernel code, 8656k reserved, 1279k data, 304k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfffa3000 - 0xfffff000 ( 368 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xc8800000 - 0xff7fe000 ( 879 MB)
lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
.init : 0xc13e9000 - 0xc1435000 ( 304 kB)
.data : 0xc12a88a6 - 0xc13e87e8 (1279 kB)
.text : 0xc1000000 - 0xc12a88a6 (2722 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:288
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 501.162 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 1002.32 BogoMIPS (lpj=2004648)
Mount-cache hash table entries: 512
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU serial number disabled.
mce: CPU supports 5 MCE banks
CPU: Intel Pentium III (Coppermine) stepping 03
Checking 'hlt' instruction... OK.
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfd9ae, last bus=1
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Interpreter disabled.
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
pci 0000:00:00.0: reg 10 32bit mmio pref: [0xf8000000-0xfbffffff]
pci 0000:00:07.1: reg 20 io port: [0x1000-0x100f]
pci 0000:00:07.2: reg 20 io port: [0x1020-0x103f]
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
pci 0000:00:07.3: quirk: region 8000-803f claimed by PIIX4 ACPI
pci 0000:00:07.3: quirk: region 2180-218f claimed by PIIX4 SMB
pci 0000:00:08.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:08.0: supports D1 D2
pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.0: PME# disabled
pci 0000:00:08.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:00:08.1: supports D1 D2
pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot
pci 0000:00:08.1: PME# disabled
pci 0000:00:0c.0: reg 10 io port: [0x1400-0x14ff]
pci 0000:00:0c.0: supports D1 D2
pci 0000:00:0c.0: PME# supported from D1 D2 D3hot
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: reg 10 32bit mmio: [0xf4000000-0xf40000ff]
pci 0000:00:0d.0: reg 14 io port: [0x1010-0x1017]
pci 0000:00:0d.0: reg 18 io port: [0x1800-0x18ff]
pci 0000:00:0d.0: supports D2
pci 0000:00:0d.0: PME# supported from D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio pref: [0xf5000000-0xf5ffffff]
pci 0000:01:00.0: reg 14 io port: [0x9000-0x90ff]
pci 0000:01:00.0: reg 18 32bit mmio: [0xf4100000-0xf4100fff]
pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:01:00.0: supports D1 D2
pci 0000:00:01.0: bridge io port: [0x9000-0x9fff]
pci 0000:00:01.0: bridge 32bit mmio: [0xf4100000-0xf41fffff]
pci 0000:00:01.0: bridge 32bit mmio pref: [0xf5000000-0xf5ffffff]
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:07.0: PIIX/ICH IRQ router [8086:7110]
Switching to clocksource tsc
pnp: PnP ACPI: disabled
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f6b40
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x85e0, dseg 0xf0000
PnPBIOS: 17 nodes reported by PnP BIOS; 17 recorded by driver
system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
system 00:01: iomem range 0x0-0x9ffff could not be reserved
system 00:01: iomem range 0xe0000-0xfffff could not be reserved
system 00:01: iomem range 0x100000-0x7ffffff could not be reserved
system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
system 00:0a: ioport range 0x8000-0x803f has been reserved
system 00:0a: ioport range 0x2180-0x218f has been reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: 0x9000-0x9fff
pci 0000:00:01.0: MEM window: 0xf4100000-0xf41fffff
pci 0000:00:01.0: PREFETCH window: 0xf5000000-0xf5ffffff
pci 0000:00:08.0: CardBus bridge, secondary bus 0000:02
pci 0000:00:08.0: IO window: 0x001c00-0x001cff
pci 0000:00:08.0: IO window: 0x002000-0x0020ff
pci 0000:00:08.0: PREFETCH window: 0x8000000-0xbffffff
pci 0000:00:08.0: MEM window: 0xc000000-0xfffffff
pci 0000:00:08.1: CardBus bridge, secondary bus 0000:06
pci 0000:00:08.1: IO window: 0x002400-0x0024ff
pci 0000:00:08.1: IO window: 0x002800-0x0028ff
pci 0000:00:08.1: PREFETCH window: 0x10000000-0x13ffffff
pci 0000:00:08.1: MEM window: 0x14000000-0x17ffffff
PCI: setting IRQ 11 as level-triggered
pci 0000:00:08.0: found PCI INT A -> IRQ 11
pci 0000:00:08.0: sharing IRQ 11 with 0000:00:08.1
pci 0000:00:08.0: sharing IRQ 11 with 0000:00:0d.0
pci 0000:00:08.0: setting latency timer to 64
pci 0000:00:08.1: found PCI INT A -> IRQ 11
pci 0000:00:08.1: sharing IRQ 11 with 0000:00:08.0
pci 0000:00:08.1: sharing IRQ 11 with 0000:00:0d.0
pci 0000:00:08.1: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
pci_bus 0000:01: resource 1 mem: [0xf4100000-0xf41fffff]
pci_bus 0000:01: resource 2 pref mem [0xf5000000-0xf5ffffff]
pci_bus 0000:02: resource 0 io: [0x1c00-0x1cff]
pci_bus 0000:02: resource 1 io: [0x2000-0x20ff]
pci_bus 0000:02: resource 2 pref mem [0x8000000-0xbffffff]
pci_bus 0000:02: resource 3 mem: [0xc000000-0xfffffff]
pci_bus 0000:06: resource 0 io: [0x2400-0x24ff]
pci_bus 0000:06: resource 1 io: [0x2800-0x28ff]
pci_bus 0000:06: resource 2 pref mem [0x10000000-0x13ffffff]
pci_bus 0000:06: resource 3 mem: [0x14000000-0x17ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:07.2: enabling device (0000 -> 0001)
PCI: setting IRQ 5 as level-triggered
pci 0000:00:07.2: found PCI INT D -> IRQ 5
pci 0000:01:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 2959k freed
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 244
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0f: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ata_piix 0000:00:07.1: version 2.13
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1000 irq 14
ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1008 irq 15
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
116x: driver isp116x-hcd, 03 Nov 2005
driver isp1362-hcd, 2005-04-04
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:07.2: found PCI INT D -> IRQ 5
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 5, io base 0x00001020
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
r8a66597_hcd: driver r8a66597_hcd, 2009-05-26
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
NET: Registered protocol family 17
Using IPI Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1.00: ATA-5: HITACHI_DK23AA-60, 00XEA0A0, max UDMA/66
ata1.00: 11733120 sectors, multi 16: LBA
ata1.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access ATA HITACHI_DK23AA-6 00XE PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 11733120 512-byte logical blocks: (6.00 GB/5.59 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:
ata2.00: ATAPI: SAMSUNG CD-ROM SN-124, TM21, max MWDMA2, CDB intr
ata2.00: configured for MWDMA2
scsi 1:0:0:0: CD-ROM SAMSUNG CD-ROM SN-124 TM21 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 304k freed
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
yenta_cardbus 0000:00:08.0: CardBus bridge found [0000:0000]
yenta_cardbus 0000:00:08.0: Enabling burst memory read transactions
yenta_cardbus 0000:00:08.0: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:00:08.0: Routing CardBus interrupts to PCI
yenta_cardbus 0000:00:08.0: TI: mfunc 0x00ba2541, devctl 0x66
yenta_cardbus 0000:00:08.0: ISA IRQ mask 0x0698, PCI irq 11
yenta_cardbus 0000:00:08.0: Socket status: 30000006
yenta_cardbus 0000:00:08.1: CardBus bridge found [0000:0000]
yenta_cardbus 0000:00:08.1: Using CSCINT to route CSC interrupts to PCI
yenta_cardbus 0000:00:08.1: Routing CardBus interrupts to PCI
yenta_cardbus 0000:00:08.1: TI: mfunc 0x00ba2541, devctl 0x66
Synaptics Touchpad, model: 1, fw: 4.1, id: 0x848a1, caps: 0x0/0x0/0x0
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input1
yenta_cardbus 0000:00:08.1: ISA IRQ mask 0x0698, PCI irq 11
yenta_cardbus 0000:00:08.1: Socket status: 30000006
squashfs: version 4.0 (2009/01/31) Phillip Lougher
aufs 2.1-standalone.tree-32-20110801
fuse init (API version 7.13)
ISO 9660 Extensions: RRIP_1991A
<30>udev[687]: starting version 167
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Linux agpgart interface v0.103
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
input: PC Speaker as /devices/platform/pcspkr/input/input2
Serial: virtual 8250/16550 driver 8 ports
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart-intel 0000:00:00.0: Intel 440BX Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf8000000
piix4_smbus 0000:00:07.3: SMBus Host Controller at 0x2180, revision 0
ltmodem: module license 'mixed' taints kernel.
Disabling lock debugging due to kernel taint
ltmodem 0000:00:0d.0: enabling device (0000 -> 0003)
ltmodem 0000:00:0d.0: found PCI INT A -> IRQ 11
ltmodem 0000:00:0d.0: sharing IRQ 11 with 0000:00:08.0
ltmodem 0000:00:0d.0: sharing IRQ 11 with 0000:00:08.1
ttySV0 at I/O 0x1010 (irq = 11) is a VUART
ltmodem: added device 11c1:442, base=0x1800, comm=0x1010, irq=11
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f 0x398-0x39f
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f 0x398-0x39f
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Loading kernel module for a network device with CAP_SYS_MODULE (deprecated). Use CAP_NET_ADMIN and alias netdev-eth0 instead
ES1968 (ESS Maestro) 0000:00:0c.0: enabling device (0000 -> 0001)
ES1968 (ESS Maestro) 0000:00:0c.0: found PCI INT A -> IRQ 5
es1968: not attempting power management.
es1968: clocking to 48000
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usb 1-1: new full speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 2:0:0:0: Direct-Access LEXAR DIGITAL FILM /W1. PQ: 0 ANSI: 2
usb-storage: device scan complete
sd 2:0:0:0: [sdb] 251904 512-byte logical blocks: (128 MB/123 MiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk
busybox: sending ioctl 4c01 to a partition!
busybox: sending ioctl 4c01 to a partition!
usb 1-1: USB disconnect, address 3
usb 1-2: USB disconnect, address 2
usb 1-1: new full speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
rtw driver version=v2.0.939.20100726
register rtl8712_netdev_ops to netdev_ops

8712_usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=81
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=2
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
bEndpointAddress=3
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(3):
bLength=7
bDescriptorType=5
bEndpointAddress=84
wMaxPacketSize=40
bInterval=1
nr_endpoint=4, in_num=2, out_num=2

8192cu: NON USB_SPEED_HIGH
Chip Version ID: VERSION_NORMAL_CHIP_88C.
modprobe: page allocation failure. order:3, mode:0x20
Pid: 23276, comm: modprobe Tainted: P 2.6.32.59 #1
Call Trace:
[<c104186f>] ? __alloc_pages_nodemask+0x464/0x491
[<c1057b2c>] ? cache_alloc_refill+0x1fb/0x3c7
[<c1057d65>] ? __kmalloc+0x6d/0xa4
[<c8a4acc5>] ? _malloc+0xa/0x15 [8192cu]
[<c8a3b370>] ? _init_xmit_priv+0x18b/0x25b [8192cu]
[<c8a4b0c9>] ? init_drv_sw+0x55/0x149 [8192cu]
[<c8a4bc45>] ? rtw_drv_init+0x252/0x3e7 [8192cu]
[<c10924c6>] ? sysfs_add_one+0xd/0x70
[<c11f0245>] ? usb_probe_interface+0xfa/0x13b
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c11956a5>] ? __driver_attach+0x40/0x5b
[<c1195073>] ? bus_for_each_dev+0x37/0x5f
[<c11954c6>] ? driver_attach+0x11/0x13
[<c1195665>] ? __driver_attach+0x0/0x5b
[<c1194b3a>] ? bus_add_driver+0x99/0x1c5
[<c11958bf>] ? driver_register+0x87/0xe0
[<c11f0061>] ? usb_register_driver+0x56/0xad
[<c882c000>] ? rtw_drv_entry+0x0/0x39 [8192cu]
[<c882c035>] ? rtw_drv_entry+0x35/0x39 [8192cu]
[<c100112b>] ? do_one_initcall+0x43/0x11f
[<c1037d35>] ? sys_init_module+0xa7/0x1da
[<c1002794>] ? sysenter_do_call+0x12/0x26
Mem-Info:
DMA per-cpu:
CPU 0: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: hi: 42, btch: 7 usd: 39
active_anon:1602 inactive_anon:4739 isolated_anon:0
active_file:6296 inactive_file:13798 isolated_file:0
unevictable:99 dirty:57 writeback:0 unstable:0
free:795 slab_reclaimable:1781 slab_unreclaimable:1117
mapped:2882 shmem:575 pagetables:140 bounce:0
DMA free:516kB min:176kB low:220kB high:264kB active_anon:604kB inactive_anon:2192kB active_file:3524kB inactive_file:7300kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15868kB mlocked:0kB dirty:36kB writeback:0kB mapped:1016kB shmem:40kB slab_reclaimable:1236kB slab_unreclaimable:396kB kernel_stack:144kB pagetables:56kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 111 111 111
Normal free:2664kB min:1260kB low:1572kB high:1888kB active_anon:5804kB inactive_anon:16764kB active_file:21660kB inactive_file:47892kB unevictable:396kB isolated(anon):0kB isolated(file):0kB present:113792kB mlocked:0kB dirty:192kB writeback:0kB mapped:10512kB shmem:2260kB slab_reclaimable:5888kB slab_unreclaimable:4072kB kernel_stack:416kB pagetables:504kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
DMA: 9*4kB 6*8kB 3*16kB 0*32kB 0*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 516kB
Normal: 364*4kB 111*8kB 20*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2664kB
20769 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
32768 pages RAM
0 pages HighMem
1462 pages reserved
20794 pages shared
16647 pages non-shared
modprobe: page allocation failure. order:4, mode:0x20
Pid: 23276, comm: modprobe Tainted: P 2.6.32.59 #1
Call Trace:
[<c104186f>] ? __alloc_pages_nodemask+0x464/0x491
[<c1003e08>] ? do_IRQ+0x66/0x76
[<c1057b2c>] ? cache_alloc_refill+0x1fb/0x3c7
[<c1057d65>] ? __kmalloc+0x6d/0xa4
[<c8a4acc5>] ? _malloc+0xa/0x15 [8192cu]
[<c8a39504>] ? _init_recv_priv+0x5a/0xf6 [8192cu]
[<c8a4b0f0>] ? init_drv_sw+0x7c/0x149 [8192cu]
[<c8a4bc45>] ? rtw_drv_init+0x252/0x3e7 [8192cu]
[<c10924c6>] ? sysfs_add_one+0xd/0x70
[<c11f0245>] ? usb_probe_interface+0xfa/0x13b
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c11956a5>] ? __driver_attach+0x40/0x5b
[<c1195073>] ? bus_for_each_dev+0x37/0x5f
[<c11954c6>] ? driver_attach+0x11/0x13
[<c1195665>] ? __driver_attach+0x0/0x5b
[<c1194b3a>] ? bus_add_driver+0x99/0x1c5
[<c11958bf>] ? driver_register+0x87/0xe0
[<c11f0061>] ? usb_register_driver+0x56/0xad
[<c882c000>] ? rtw_drv_entry+0x0/0x39 [8192cu]
[<c882c035>] ? rtw_drv_entry+0x35/0x39 [8192cu]
[<c100112b>] ? do_one_initcall+0x43/0x11f
[<c1037d35>] ? sys_init_module+0xa7/0x1da
[<c1002794>] ? sysenter_do_call+0x12/0x26
Mem-Info:
DMA per-cpu:
CPU 0: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: hi: 42, btch: 7 usd: 39
active_anon:1602 inactive_anon:4739 isolated_anon:0
active_file:6296 inactive_file:13798 isolated_file:0
unevictable:99 dirty:57 writeback:0 unstable:0
free:795 slab_reclaimable:1781 slab_unreclaimable:1117
mapped:2882 shmem:575 pagetables:140 bounce:0
DMA free:516kB min:176kB low:220kB high:264kB active_anon:604kB inactive_anon:2192kB active_file:3524kB inactive_file:7300kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15868kB mlocked:0kB dirty:36kB writeback:0kB mapped:1016kB shmem:40kB slab_reclaimable:1236kB slab_unreclaimable:396kB kernel_stack:144kB pagetables:56kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 111 111 111
Normal free:2664kB min:1260kB low:1572kB high:1888kB active_anon:5804kB inactive_anon:16764kB active_file:21660kB inactive_file:47892kB unevictable:396kB isolated(anon):0kB isolated(file):0kB present:113792kB mlocked:0kB dirty:192kB writeback:0kB mapped:10512kB shmem:2260kB slab_reclaimable:5888kB slab_unreclaimable:4072kB kernel_stack:416kB pagetables:504kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
DMA: 9*4kB 6*8kB 3*16kB 0*32kB 0*64kB 1*128kB 1*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 516kB
Normal: 364*4kB 111*8kB 20*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2664kB
20769 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
32768 pages RAM
0 pages HighMem
1462 pages reserved
20794 pages shared
16647 pages non-shared
Can't _init_recv_priv
usbcore: registered new interface driver rtw_usb_drv
usb 1-1: USB disconnect, address 4
usb 1-2: new full speed USB device using uhci_hcd and address 5
usb 1-2: configuration #1 chosen from 1 choice
register rtl8712_netdev_ops to netdev_ops

8712_usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=81
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=2
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
bEndpointAddress=3
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(3):
bLength=7
bDescriptorType=5
bEndpointAddress=84
wMaxPacketSize=40
bInterval=1
nr_endpoint=4, in_num=2, out_num=2

8192cu: NON USB_SPEED_HIGH
Chip Version ID: VERSION_NORMAL_CHIP_88C.
khubd: page allocation failure. order:2, mode:0x20
Pid: 13, comm: khubd Tainted: P 2.6.32.59 #1
Call Trace:
[<c104186f>] ? __alloc_pages_nodemask+0x464/0x491
[<c1057b2c>] ? cache_alloc_refill+0x1fb/0x3c7
[<c1057d65>] ? __kmalloc+0x6d/0xa4
[<c124cca9>] ? __alloc_skb+0x4a/0x115
[<c124da4e>] ? __netdev_alloc_skb+0x14/0x2e
[<c8a49047>] ? init_recv_priv+0x12c/0x185 [8192cu]
[<c8a39587>] ? _init_recv_priv+0xdd/0xf6 [8192cu]
[<c8a4b0f0>] ? init_drv_sw+0x7c/0x149 [8192cu]
[<c8a4bc45>] ? rtw_drv_init+0x252/0x3e7 [8192cu]
[<c10924c6>] ? sysfs_add_one+0xd/0x70
[<c11f0245>] ? usb_probe_interface+0xfa/0x13b
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c1194e5d>] ? bus_for_each_drv+0x37/0x5f
[<c1195744>] ? device_attach+0x41/0x51
[<c11956c0>] ? __device_attach+0x0/0x28
[<c1194d06>] ? bus_probe_device+0x19/0x2d
[<c1193d95>] ? device_add+0x307/0x440
[<c11932fe>] ? dev_set_name+0x14/0x15
[<c11ef901>] ? usb_set_configuration+0x3e7/0x481
[<c11ef954>] ? usb_set_configuration+0x43a/0x481
[<c11f5170>] ? generic_probe+0x4a/0x7a
[<c11efb27>] ? usb_probe_device+0x1b/0x1c
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c1194e5d>] ? bus_for_each_drv+0x37/0x5f
[<c1195744>] ? device_attach+0x41/0x51
[<c11956c0>] ? __device_attach+0x0/0x28
[<c1194d06>] ? bus_probe_device+0x19/0x2d
[<c1193d95>] ? device_add+0x307/0x440
[<c11ead12>] ? usb_new_device+0x47/0x87
[<c11ebe26>] ? hub_thread+0x89c/0xcd6
[<c1029198>] ? autoremove_wake_function+0x0/0x2d
[<c11eb58a>] ? hub_thread+0x0/0xcd6
[<c1028ed5>] ? kthread+0x60/0x65
[<c1028e75>] ? kthread+0x0/0x65
[<c1003047>] ? kernel_thread_helper+0x7/0x10
Mem-Info:
DMA per-cpu:
CPU 0: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: hi: 42, btch: 7 usd: 9
active_anon:1122 inactive_anon:4662 isolated_anon:0
active_file:6646 inactive_file:13279 isolated_file:0
unevictable:99 dirty:24 writeback:0 unstable:0
free:1481 slab_reclaimable:1795 slab_unreclaimable:1215
mapped:2314 shmem:561 pagetables:124 bounce:0
DMA free:976kB min:176kB low:220kB high:264kB active_anon:348kB inactive_anon:2192kB active_file:4076kB inactive_file:6184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15868kB mlocked:0kB dirty:8kB writeback:0kB mapped:496kB shmem:40kB slab_reclaimable:1228kB slab_unreclaimable:792kB kernel_stack:128kB pagetables:44kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 111 111 111
Normal free:4948kB min:1260kB low:1572kB high:1888kB active_anon:4140kB inactive_anon:16456kB active_file:22508kB inactive_file:46932kB unevictable:396kB isolated(anon):0kB isolated(file):0kB present:113792kB mlocked:0kB dirty:88kB writeback:0kB mapped:8760kB shmem:2204kB slab_reclaimable:5952kB slab_unreclaimable:4068kB kernel_stack:392kB pagetables:452kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
DMA: 112*4kB 64*8kB 1*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 976kB
Normal: 693*4kB 256*8kB 8*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 4948kB
20585 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
32768 pages RAM
0 pages HighMem
1462 pages reserved
19139 pages shared
16650 pages non-shared
khubd: page allocation failure. order:4, mode:0x20
Pid: 13, comm: khubd Tainted: P 2.6.32.59 #1
Call Trace:
[<c104186f>] ? __alloc_pages_nodemask+0x464/0x491
[<c1057d69>] ? __kmalloc+0x71/0xa4
[<c1057b2c>] ? cache_alloc_refill+0x1fb/0x3c7
[<c1057d65>] ? __kmalloc+0x6d/0xa4
[<c8a4acc5>] ? _malloc+0xa/0x15 [8192cu]
[<c8a39b0d>] ? _init_sta_priv+0x10/0x93 [8192cu]
[<c8a4b14f>] ? init_drv_sw+0xdb/0x149 [8192cu]
[<c8a4bc45>] ? rtw_drv_init+0x252/0x3e7 [8192cu]
[<c10924c6>] ? sysfs_add_one+0xd/0x70
[<c11f0245>] ? usb_probe_interface+0xfa/0x13b
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c1194e5d>] ? bus_for_each_drv+0x37/0x5f
[<c1195744>] ? device_attach+0x41/0x51
[<c11956c0>] ? __device_attach+0x0/0x28
[<c1194d06>] ? bus_probe_device+0x19/0x2d
[<c1193d95>] ? device_add+0x307/0x440
[<c11932fe>] ? dev_set_name+0x14/0x15
[<c11ef901>] ? usb_set_configuration+0x3e7/0x481
[<c11ef954>] ? usb_set_configuration+0x43a/0x481
[<c11f5170>] ? generic_probe+0x4a/0x7a
[<c11efb27>] ? usb_probe_device+0x1b/0x1c
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c1194e5d>] ? bus_for_each_drv+0x37/0x5f
[<c1195744>] ? device_attach+0x41/0x51
[<c11956c0>] ? __device_attach+0x0/0x28
[<c1194d06>] ? bus_probe_device+0x19/0x2d
[<c1193d95>] ? device_add+0x307/0x440
[<c11ead12>] ? usb_new_device+0x47/0x87
[<c11ebe26>] ? hub_thread+0x89c/0xcd6
[<c1029198>] ? autoremove_wake_function+0x0/0x2d
[<c11eb58a>] ? hub_thread+0x0/0xcd6
[<c1028ed5>] ? kthread+0x60/0x65
[<c1028e75>] ? kthread+0x0/0x65
[<c1003047>] ? kernel_thread_helper+0x7/0x10
Mem-Info:
DMA per-cpu:
CPU 0: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: hi: 42, btch: 7 usd: 9
active_anon:1122 inactive_anon:4662 isolated_anon:0
active_file:6646 inactive_file:13279 isolated_file:0
unevictable:99 dirty:24 writeback:0 unstable:0
free:1481 slab_reclaimable:1795 slab_unreclaimable:1215
mapped:2314 shmem:561 pagetables:124 bounce:0
DMA free:976kB min:176kB low:220kB high:264kB active_anon:348kB inactive_anon:2192kB active_file:4076kB inactive_file:6184kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15868kB mlocked:0kB dirty:8kB writeback:0kB mapped:496kB shmem:40kB slab_reclaimable:1228kB slab_unreclaimable:792kB kernel_stack:128kB pagetables:44kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 111 111 111
Normal free:4948kB min:1260kB low:1572kB high:1888kB active_anon:4140kB inactive_anon:16456kB active_file:22508kB inactive_file:46932kB unevictable:396kB isolated(anon):0kB isolated(file):0kB present:113792kB mlocked:0kB dirty:88kB writeback:0kB mapped:8760kB shmem:2204kB slab_reclaimable:5952kB slab_unreclaimable:4068kB kernel_stack:392kB pagetables:452kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
DMA: 112*4kB 64*8kB 1*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 976kB
Normal: 693*4kB 256*8kB 8*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 4948kB
20585 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
32768 pages RAM
0 pages HighMem
1462 pages reserved
19139 pages shared
16650 pages non-shared
Can't _init_sta_priv
airo(): Probing for PCI adapters
airo(): Finished probing for PCI adapters
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
usb 1-2: USB disconnect, address 5
spectrum_cs 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, et al)
usb 1-1: new full speed USB device using uhci_hcd and address 6
usb 1-1: configuration #1 chosen from 1 choice
register rtl8712_netdev_ops to netdev_ops

8712_usb_endpoint_descriptor(0):
bLength=7
bDescriptorType=5
bEndpointAddress=81
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(1):
bLength=7
bDescriptorType=5
bEndpointAddress=2
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(2):
bLength=7
bDescriptorType=5
bEndpointAddress=3
wMaxPacketSize=40
bInterval=0

8712_usb_endpoint_descriptor(3):
bLength=7
bDescriptorType=5
bEndpointAddress=84
wMaxPacketSize=40
bInterval=1
nr_endpoint=4, in_num=2, out_num=2

8192cu: NON USB_SPEED_HIGH
Chip Version ID: VERSION_NORMAL_CHIP_88C.
khubd: page allocation failure. order:4, mode:0x20
Pid: 13, comm: khubd Tainted: P 2.6.32.59 #1
Call Trace:
[<c104186f>] ? __alloc_pages_nodemask+0x464/0x491
[<c1057b2c>] ? cache_alloc_refill+0x1fb/0x3c7
[<c1057d65>] ? __kmalloc+0x6d/0xa4
[<c8a4acc5>] ? _malloc+0xa/0x15 [8192cu]
[<c8a3115e>] ? _init_mlme_priv+0x7d/0xe9 [8192cu]
[<c8a311cf>] ? init_mlme_priv+0x5/0x16 [8192cu]
[<c8a4b0b4>] ? init_drv_sw+0x40/0x149 [8192cu]
[<c8a4bc45>] ? rtw_drv_init+0x252/0x3e7 [8192cu]
[<c10924c6>] ? sysfs_add_one+0xd/0x70
[<c11f0245>] ? usb_probe_interface+0xfa/0x13b
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c1194e5d>] ? bus_for_each_drv+0x37/0x5f
[<c1195744>] ? device_attach+0x41/0x51
[<c11956c0>] ? __device_attach+0x0/0x28
[<c1194d06>] ? bus_probe_device+0x19/0x2d
[<c1193d95>] ? device_add+0x307/0x440
[<c11932fe>] ? dev_set_name+0x14/0x15
[<c11ef901>] ? usb_set_configuration+0x3e7/0x481
[<c11ef954>] ? usb_set_configuration+0x43a/0x481
[<c11f5170>] ? generic_probe+0x4a/0x7a
[<c11efb27>] ? usb_probe_device+0x1b/0x1c
[<c11955de>] ? driver_probe_device+0x75/0xfc
[<c1194e5d>] ? bus_for_each_drv+0x37/0x5f
[<c1195744>] ? device_attach+0x41/0x51
[<c11956c0>] ? __device_attach+0x0/0x28
[<c1194d06>] ? bus_probe_device+0x19/0x2d
[<c1193d95>] ? device_add+0x307/0x440
[<c11ead12>] ? usb_new_device+0x47/0x87
[<c11ebe26>] ? hub_thread+0x89c/0xcd6
[<c1029198>] ? autoremove_wake_function+0x0/0x2d
[<c11eb58a>] ? hub_thread+0x0/0xcd6
[<c1028ed5>] ? kthread+0x60/0x65
[<c1028e75>] ? kthread+0x0/0x65
[<c1003047>] ? kernel_thread_helper+0x7/0x10
Mem-Info:
DMA per-cpu:
CPU 0: hi: 0, btch: 1 usd: 0
Normal per-cpu:
CPU 0: hi: 42, btch: 7 usd: 13
active_anon:2416 inactive_anon:4699 isolated_anon:0
active_file:7427 inactive_file:10569 isolated_file:0
unevictable:99 dirty:9 writeback:0 unstable:0
free:1878 slab_reclaimable:1796 slab_unreclaimable:1243
mapped:3043 shmem:709 pagetables:144 bounce:0
DMA free:2608kB min:176kB low:220kB high:264kB active_anon:356kB inactive_anon:2192kB active_file:3900kB inactive_file:4752kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15868kB mlocked:0kB dirty:0kB writeback:0kB mapped:836kB shmem:40kB slab_reclaimable:1204kB slab_unreclaimable:808kB kernel_stack:104kB pagetables:44kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 111 111 111
Normal free:4904kB min:1260kB low:1572kB high:1888kB active_anon:9308kB inactive_anon:16604kB active_file:25808kB inactive_file:37524kB unevictable:396kB isolated(anon):0kB isolated(file):0kB present:113792kB mlocked:0kB dirty:36kB writeback:0kB mapped:11336kB shmem:2796kB slab_reclaimable:5980kB slab_unreclaimable:4164kB kernel_stack:432kB pagetables:532kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no
lowmem_reserve[]: 0 0 0 0
DMA: 180*4kB 190*8kB 21*16kB 1*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 2608kB
Normal: 812*4kB 197*8kB 5*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 4904kB
18804 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
32768 pages RAM
0 pages HighMem
1462 pages reserved
21997 pages shared
16617 pages non-shared
# lsmod
Module Size Used by
spectrum_cs 2578 0
smc91c92_cs 12886 0
mii 2630 1 smc91c92_cs
ray_cs 14416 0
pcnet_cs 24210 0
8390 5081 1 pcnet_cs
orinoco_cs 7993 0
orinoco 48854 2 spectrum_cs,orinoco_cs
cfg80211 88465 1 orinoco
rfkill 9546 1 cfg80211
nmclan_cs 4847 0
netwave_cs 5718 0
libertas_cs 4744 0
libertas 56856 1 libertas_cs
hostap_cs 36918 0
hostap 73652 1 hostap_cs
lib80211 2546 3 libertas,hostap_cs,hostap
fmvj18x_cs 8138 0
axnet_cs 10664 0
atmel_cs 3129 0
atmel 26427 1 atmel_cs
airo_cs 2226 0
airo 52396 1 airo_cs
3c589_cs 6488 0
8192cu 231174 0
snd_es1968 15093 0
gameport 5493 1 snd_es1968
snd_ac97_codec 78088 1 snd_es1968
ac97_bus 686 1 snd_ac97_codec
snd_pcm_oss 27703 0
snd_mixer_oss 10073 1 snd_pcm_oss
snd_pcm 44791 3 snd_es1968,snd_ac97_codec,snd_pcm_oss
snd_page_alloc 4669 2 snd_es1968,snd_pcm
snd_mpu401_uart 3695 1 snd_es1968
snd_seq_dummy 903 0
snd_seq_oss 18033 0
snd_seq_midi 3148 0
snd_rawmidi 11487 2 snd_mpu401_uart,snd_seq_midi
snd_seq_midi_event 3480 2 snd_seq_oss,snd_seq_midi
snd_seq 30329 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 11292 2 snd_pcm,snd_seq
battery 7216 0
snd_seq_device 3605 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd 30714 11 snd_es1968,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_mpu401_uart,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
evdev 5392 1
soundcore 3143 1 snd
ltmodem 524309 0
ungrab_serial 809 1 ltmodem
i2c_piix4 6872 0
intel_agp 18971 1
shpchp 21200 0
serio_raw 2816 0
v8250 6825 1 ltmodem
pcspkr 1151 0
apm 9246 1
i2c_core 12183 1 i2c_piix4
agpgart 18752 1 intel_agp
pci_hotplug 18474 1 shpchp
fuse 42197 2
aufs 118451 37
nls_iso8859_1 2937 0
nls_cp437 4465 0
squashfs 15580 2
yenta_socket 16255 2
rsrc_nonstatic 6861 1 yenta_socket
psmouse 47559 0
floppy 39623 0
# rnmod r8192s_usb
bash: rnmod: command not found
# rnmod 8192cu
bash: rnmod: command not found
# modprobe 8192cu
# ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9376
Location: Stratford, Ontario

PostPosted: Tue 16 Oct 2012, 09:29    Post subject:  

Quote:
# rnmod r8192s_usb
bash: rnmod: command not found

The command is "r m mod" as in "remove module".

But there's something else going on here. You appear to be loading drivers for a PCMCIA card. Do you have one installed?
Back to top
View user's profile Send private message 
cathawk

Joined: 14 Oct 2012
Posts: 6

PostPosted: Tue 16 Oct 2012, 09:57    Post subject:  

This is an old laptop that has PCM port that used to house a wired ethernet adaptor, but now is empty.
Back to top
View user's profile Send private message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9376
Location: Stratford, Ontario

PostPosted: Tue 16 Oct 2012, 11:09    Post subject:  

I know nothing about PCMCIA, so I don't understand what is happening here. But the dmesg output shows a problem with the new 8192cu module.

Do you have a different, more conventional machine that you can test this on?
Back to top
View user's profile Send private message 
Display posts from previous:   Sort by:   
Page 1 of 1 [14 Posts]  
Post new topic   Reply to topic View previous topic :: View next topic
 Forum index » House Training » Beginners Help ( Start Here)
Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.2136s ][ Queries: 12 (0.0141s) ][ GZIP on ]