Puppy Linux Discussion Forum Forum Index Puppy Linux Discussion Forum
Puppy HOME page : puppylinux.com
"THE" alternative forum : puppylinux.info
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The time now is Wed 20 Aug 2014, 02:50
All times are UTC - 4
 Forum index » House Training » Beginners Help ( Start Here)
Puppy from CD sees HD but none of the data in it
Moderators: Flash, Ian, JohnMurga
Post_new_topic   Reply_to_topic View_previous_topic :: View_next_topic
Page 1 of 2 Posts_count   Goto page: 1, 2 Next
Author Message
Horatio

Joined: 17 Nov 2012
Posts: 11

PostPosted: Sat 17 Nov 2012, 17:34    Post_subject:  Puppy from CD sees HD but none of the data in it  

First post here, I have a failed PC (circa 2005 vintage using XP)
I returned to it to find I had no response at all, had to power off and it would not reboot
I had a Puppy Linux boot cd from about a year ago when another PC died, I believe its version 5.2.5
It booted the dead PC but it does not show my data, it recognizes the hard drive and it shows a total memory of 2075188kb, with free memory 1743844kb whereas I know there was very little space left
Am I looking in the wrong place or does this suggest the hard drive is toast?
Any advice appreciated
Back to top
View user's profile Send_private_message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9027
Location: Stratford, Ontario

PostPosted: Sat 17 Nov 2012, 17:40    Post_subject: Re: Viewing hard drive contents when using Puppy  

Horatio wrote:
it recognizes the hard drive and it shows a total memory of 2075188kb, with free memory 1743844kb

Please explain. Where are you seeing these numbers?

Is there a drive icon on the desktop? If you click it, does the drive mount?

Run Gparted from the System menu. What does it say about the drive?
Back to top
View user's profile Send_private_message 
postfs1


Joined: 27 Mar 2010
Posts: 831

PostPosted: Sat 17 Nov 2012, 18:19    Post_subject:  

[1]Options of booting:

puppy pfix=nox,ram

[2]In command prompt:

fdisk -l

_________________
  • I don't know why laboratories are named a hospitals.
  • The alive personage is like a tea bag with granules of unknown density inside, at that one the packet was made of organic material and was placed in the evaporated liquid or liquid.

Back to top
View user's profile Send_private_message 
Horatio

Joined: 17 Nov 2012
Posts: 11

PostPosted: Sun 18 Nov 2012, 07:48    Post_subject: Re: Viewing hard drive contents when using Puppy  

Many thanks for the prompt reply and apologies for not coming back sooner, I foolishly forgot to follow the the thread

There is no recognisable drive icon on the desktop, there is for the cd drive

I ran Gparted as suggested and then selected scan ll drives, it comes up with :-

Partition = unallocated
File system = unallocated
Size = 186.31 GiB
Used = ---
Unused = ---

In the box top right is /dev/sda (186.31 GiB)

What do I do next please?




rcrsn51 wrote:
Horatio wrote:
it recognizes the hard drive and it shows a total memory of 2075188kb, with free memory 1743844kb

Please explain. Where are you seeing these numbers?

Is there a drive icon on the desktop? If you click it, does the drive mount?

Run Gparted from the System menu. What does it say about the drive?
Back to top
View user's profile Send_private_message 
Horatio

Joined: 17 Nov 2012
Posts: 11

PostPosted: Sun 18 Nov 2012, 08:16    Post_subject:  

Thanks for your reply

I am unsure what the first command is for but ran fdisk however it came up with :-

The number of cylinders for that disk is set to 302885.
There is nothing wrong with that , but this is larger than 1024, nand could in certain setups cause problems with:
1) software that runs at boot time (eg old versions of LILO)
2) booting and partitioning software from other OSs (eg DOS FDISK, OS/2 FDISK)

I have no idea what effect the above may have or what to do next?

postfs1 wrote:
[1]Options of booting:

puppy pfix=nox,ram

[2]In command prompt:

fdisk -l
Back to top
View user's profile Send_private_message 
Horatio

Joined: 17 Nov 2012
Posts: 11

PostPosted: Sun 18 Nov 2012, 08:32    Post_subject: Re: Viewing hard drive contents when using Puppy  

Apologies I forgot to answer the question of where I found the quoted numbers

Under System > System Status and Config > Hardinfo hardware information

Not being used to linux I was just looking around for information

[quote="rcrsn51"]
Horatio wrote:
it recognizes the hard drive and it shows a total memory of 2075188kb, with free memory 1743844kb

Please explain. Where are you seeing these numbers?
Back to top
View user's profile Send_private_message 
FeodorF


Joined: 07 Jul 2010
Posts: 167
Location: Heidelberg, Germany

PostPosted: Sun 18 Nov 2012, 08:52    Post_subject: Re: Viewing hard drive contents when using Puppy  

Hi Horatio,

please do the following:

- boot your PC with the Puppy Linux CD while using the boot option:

puppy pfix=ram

- while running Puppy Linux click on the 'file' icon; the ROX file handler will pop up

- click on the green arrow within the ROX window; now you will see some folders like 'bin..dev.. etc' and so on

- click on the folder 'tmp'; there is a file named 'bootkernel.log' this one is needed for further help

- now move the mouse cursor to the desktop icon 'console' and click on it

- in the 'urxvt' console you need to enter

gzip /tmp/bootkernel.log

- if you look at the folder 'tmp' now, you will see, that your file 'bootkernel.log' has been changed to:

bootkernel.log.gz

please post this file.
Back to top
View user's profile Send_private_message 
Barkin


Joined: 12 Aug 2011
Posts: 690

PostPosted: Sun 18 Nov 2012, 09:13    Post_subject:  

I'm using Puppy 525. If you left-click on the icon I've ringed on red below, then click on the "All Drives" button which appears, you are then informed about the capacity of the various drives/partitions and how much of each is free space, ( the "sda" are partitions on my single hard drive, "sdb" is a USB memory stick).
Puppy 525, click on icon ringed in red, then click ''All Drives'' button.png
 Description   screen shot
 Filesize   5.22 KB
 Viewed   381 Time(s)

Puppy 525, click on icon ringed in red, then click ''All Drives'' button.png


Edited_times_total
Back to top
View user's profile Send_private_message 
Horatio

Joined: 17 Nov 2012
Posts: 11

PostPosted: Sun 18 Nov 2012, 09:21    Post_subject: Re: Viewing hard drive contents when using Puppy  

FeodorF wrote:
Hi Horatio,

please do the following:

- boot your PC with the Puppy Linux CD while using the boot option:

puppy pfix=ram

- while running Puppy Linux click on the 'file' icon; the ROX file handler will pop up

- click on the green arrow within the ROX window; now you will see some folders like 'bin..dev.. etc' and so on

- click on the folder 'tmp'; there is a file named 'bootkernel.log' this one is needed for further help

- now move the mouse cursor to the desktop icon 'console' and click on it

- in the 'urxvt' console you need to enter

gzip /tmp/bootkernel.log

- if you look at the folder 'tmp' now, you will see, that your file 'bootkernel.log' has been changed to:

bootkernel.log.gz

please post this file.


Sorry for being dense but where would I get the option puppy pfix=ram

When I boot from the CD I get to a point where I am prompted to enter xorgwizard

Then set the display

(this takes a few attempts) but finally I get a prompt to enter xwin to start X then have to reset time, keyboard etc
Back to top
View user's profile Send_private_message 
Horatio

Joined: 17 Nov 2012
Posts: 11

PostPosted: Sun 18 Nov 2012, 09:27    Post_subject:  

Barkin wrote:
I'm using Puppy 525. If you left-click on the icon I've ringed on red below, then click on the "All Drives" button which appears, you are then informed about the capacity of the various drives/partitions and how much of each is free space, ( all the sda (except sda6) are partitions on my single hard drive, sdb is a USB memory stick, sda6 is ram).


Unfortunately I do not get that box when i click the green icon in the lower bar, It comes up with a box headed Mounted Drives and options for All Drives or Quit, selecting All Drives brings up a box with just Quit in it
Back to top
View user's profile Send_private_message 
Barkin


Joined: 12 Aug 2011
Posts: 690

PostPosted: Sun 18 Nov 2012, 09:43    Post_subject:  

Horatio wrote:
Unfortunately I do not get that box when i click the green icon in the lower bar, It comes up with a box headed Mounted Drives and options for All Drives or Quit, selecting All Drives brings up a box with just Quit in it


Never had that myself, it doesn't sound good.

BTW to select "pfix=ram" press the "f2" button on keyboard when you boot up , (press f2 when the puppy head logo fills the screen).
Back to top
View user's profile Send_private_message 
Barkin


Joined: 12 Aug 2011
Posts: 690

PostPosted: Sun 18 Nov 2012, 09:45    Post_subject:  

Horatio wrote:
Unfortunately I do not get that box when i click the green icon in the lower bar, It comes up with a box headed Mounted Drives and options for All Drives or Quit, selecting All Drives brings up a box with just Quit in it

Never had that myself, it doesn't sound good.

Horatio wrote:
... where would I get the option puppy pfix=ram

to select "pfix=ram" press the "f2" button on keyboard when you boot up , (press f2 when the puppy head logo fills the screen).
big puppy head logo fills the screen.jpg
 Description   big puppy head logo splash screen appears at boot, press f2 then.
 Filesize   9.07 KB
 Viewed   350 Time(s)

big puppy head logo fills the screen.jpg


Edited_time_total
Back to top
View user's profile Send_private_message 
postfs1


Joined: 27 Mar 2010
Posts: 831

PostPosted: Sun 18 Nov 2012, 09:47    Post_subject: Re: Puppy from CD sees HD but none of the data in it  

Horatio wrote:
...
Am I looking in the wrong place or does this suggest the hard drive is toast?
...


In command prompt:

fdisk --help

fdisk -l <--- will show what file storage devices are connected to computer

fdisk -l /dev/sda1 <--- will show some information about particular partition of file storage device /dev/sda, if the /dev/sda1 partition exists.

_________________
  • I don't know why laboratories are named a hospitals.
  • The alive personage is like a tea bag with granules of unknown density inside, at that one the packet was made of organic material and was placed in the evaporated liquid or liquid.

Back to top
View user's profile Send_private_message 
Horatio

Joined: 17 Nov 2012
Posts: 11

PostPosted: Sun 18 Nov 2012, 10:30    Post_subject: Re: Viewing hard drive contents when using Puppy  

FeodorF wrote:
Hi Horatio,

please do the following:

- boot your PC with the Puppy Linux CD while using the boot option:

puppy pfix=ram

- while running Puppy Linux click on the 'file' icon; the ROX file handler will pop up

- click on the green arrow within the ROX window; now you will see some folders like 'bin..dev.. etc' and so on

- click on the folder 'tmp'; there is a file named 'bootkernel.log' this one is needed for further help

- now move the mouse cursor to the desktop icon 'console' and click on it

- in the 'urxvt' console you need to enter

gzip /tmp/bootkernel.log

- if you look at the folder 'tmp' now, you will see, that your file 'bootkernel.log' has been changed to:

bootkernel.log.gz

please post this file.


Added item = tried to use the command you mentioned but got :- Could not find Kernel image .... it then flipped to booting so am unsure if there was more but if there was it was not much


Finally got there, it was a bit of a fight trying to copy the file but eventually here it is :-

C_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @c2800000 s25816 r0 d23336 u2097152
pcpu-alloc: s25816 r0 d23336 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
Kernel command line: initrd=initrd.gz pmedia=cd BOOT_IMAGE=vmlinuz
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000377fe:0007fff0)
Memory: 2071884k/2097088k available (2614k kernel code, 23636k reserved, 1250k data, 328k init, 1187784k highmem)
virtual kernel memory layout:
fixmap : 0xfff6a000 - 0xfffff000 ( 596 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc13c7000 - 0xc1419000 ( 328 kB)
.data : 0xc128d936 - 0xc13c62e0 (1250 kB)
.text : 0xc1000000 - 0xc128d936 (2614 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:384
spurious 8259A interrupt: IRQ7.
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 2010.230 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4020.46 BogoMIPS (lpj=8040920)
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
Checking 'hlt' instruction... OK.
ACPI: Core revision 20091214
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
Brought up 2 CPUs
Total of 2 processors activated (8041.32 BogoMIPS).
NET: Registered protocol family 16
EISA bus registered
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x03af] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03e0-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x9000-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x03b0-0x03df] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfeb00000-0xfebfffff] (ignored)
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:01.1: reg 10: [io 0xff00-0xff1f]
pci 0000:00:01.1: reg 20: [io 0x4c00-0x4c3f]
pci 0000:00:01.1: reg 24: [io 0x4c40-0x4c7f]
pci 0000:00:01.1: PME# supported from D3hot D3cold
pci 0000:00:01.1: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xfebff000-0xfebfffff]
pci 0000:00:02.0: supports D1 D2
pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:02.1: reg 10: [mem 0xfeb00000-0xfeb000ff]
pci 0000:00:02.1: supports D1 D2
pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:02.1: PME# disabled
pci 0000:00:04.0: reg 10: [io 0xea00-0xeaff]
pci 0000:00:04.0: reg 14: [io 0xee00-0xeeff]
pci 0000:00:04.0: reg 18: [mem 0xfebfd000-0xfebfdfff]
pci 0000:00:04.0: supports D1 D2
pci 0000:00:06.0: reg 20: [io 0xfb00-0xfb0f]
pci 0000:00:07.0: reg 10: [io 0x09f0-0x09f7]
pci 0000:00:07.0: reg 14: [io 0x0bf0-0x0bf3]
pci 0000:00:07.0: reg 18: [io 0x0970-0x0977]
pci 0000:00:07.0: reg 1c: [io 0x0b70-0x0b73]
pci 0000:00:07.0: reg 20: [io 0xf600-0xf60f]
pci 0000:00:07.0: reg 24: [mem 0xfebfb000-0xfebfbfff]
pci 0000:00:08.0: reg 10: [io 0x09e0-0x09e7]
pci 0000:00:08.0: reg 14: [io 0x0be0-0x0be3]
pci 0000:00:08.0: reg 18: [io 0x0960-0x0967]
pci 0000:00:08.0: reg 1c: [io 0x0b60-0x0b63]
pci 0000:00:08.0: reg 20: [io 0xf100-0xf10f]
pci 0000:00:08.0: reg 24: [mem 0xfebfa000-0xfebfafff]
pci 0000:00:0a.0: reg 10: [mem 0xfebf9000-0xfebf9fff]
pci 0000:00:0a.0: reg 14: [io 0xf000-0xf007]
pci 0000:00:0a.0: supports D1 D2
pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0a.0: PME# disabled
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: PME# disabled
pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0c.0: PME# disabled
pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0d.0: PME# disabled
pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0e.0: PME# disabled
pci 0000:01:08.0: reg 10: [mem 0xfe9fe000-0xfe9fffff]
pci 0000:01:08.0: reg 14: [mem 0xfe9c0000-0xfe9dffff]
pci 0000:01:08.0: supports D1 D2
pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot
pci 0000:01:08.0: PME# disabled
pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0b.0: bridge window [mem 0xfe700000-0xfe7fffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0c.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:0c.0: bridge window [mem 0xfe500000-0xfe5fffff 64bit pref]
pci 0000:00:0d.0: PCI bridge to [bus 04-04]
pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0d.0: bridge window [mem 0xfe300000-0xfe3fffff 64bit pref]
pci 0000:05:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:05:00.0: reg 18: [mem 0xfe2f0000-0xfe2fffff 64bit]
pci 0000:05:00.0: reg 20: [io 0x9e00-0x9eff]
pci 0000:05:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.1: reg 10: [mem 0xfe2e0000-0xfe2effff 64bit]
pci 0000:05:00.1: supports D1 D2
pci 0000:00:0e.0: PCI bridge to [bus 05-05]
pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0e.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 1Cool *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
vgaarb: device added: PCI:0000:05:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: [io 0x4000-0x407f] has been reserved
system 00:01: [io 0x4080-0x40ff] has been reserved
system 00:01: [io 0x4400-0x447f] has been reserved
system 00:01: [io 0x4480-0x44ff] has been reserved
system 00:01: [io 0x4800-0x487f] has been reserved
system 00:01: [io 0x4880-0x48ff] has been reserved
system 00:02: [io 0x0b78-0x0b7b] has been reserved
system 00:02: [io 0x0f78-0x0f7b] has been reserved
system 00:02: [io 0x0a78-0x0a7b] has been reserved
system 00:02: [io 0x0e78-0x0e7b] has been reserved
system 00:02: [io 0x0bbc-0x0bbf] has been reserved
system 00:02: [io 0x0fbc-0x0fbf] has been reserved
system 00:02: [io 0x04d0-0x04d1] has been reserved
system 00:02: [io 0x0290-0x030f] has been reserved
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0c: [mem 0x000f0000-0x000f3fff] could not be reserved
system 00:0c: [mem 0x000f4000-0x000f7fff] could not be reserved
system 00:0c: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0c: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0c: [mem 0x7fff0000-0x7fffffff] could not be reserved
system 00:0c: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x00100000-0x7ffeffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:0c: [mem 0xfefff000-0xfeffffff] has been reserved
system 00:0c: [mem 0xfff80000-0xfff80fff] has been reserved
system 00:0c: [mem 0xfff90000-0xfffbffff] has been reserved
system 00:0c: [mem 0xfffed000-0xfffeffff] has been reserved
Switching to clocksource acpi_pm
pci 0000:00:09.0: PCI bridge to [bus 01-01]
pci 0000:00:09.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:09.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff pref]
pci 0000:00:0b.0: PCI bridge to [bus 02-02]
pci 0000:00:0b.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:0b.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:0b.0: bridge window [mem 0xfe700000-0xfe7fffff 64bit pref]
pci 0000:00:0c.0: PCI bridge to [bus 03-03]
pci 0000:00:0c.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:0c.0: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:0c.0: bridge window [mem 0xfe500000-0xfe5fffff 64bit pref]
pci 0000:00:0d.0: PCI bridge to [bus 04-04]
pci 0000:00:0d.0: bridge window [io 0xa000-0xafff]
pci 0000:00:0d.0: bridge window [mem 0xfe400000-0xfe4fffff]
pci 0000:00:0d.0: bridge window [mem 0xfe300000-0xfe3fffff 64bit pref]
pci 0000:05:00.0: BAR 6: assigned [mem 0xfe200000-0xfe21ffff pref]
pci 0000:00:0e.0: PCI bridge to [bus 05-05]
pci 0000:00:0e.0: bridge window [io 0x9000-0x9fff]
pci 0000:00:0e.0: bridge window [mem 0xfe200000-0xfe2fffff]
pci 0000:00:0e.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:09.0: setting latency timer to 64
pci 0000:00:0b.0: setting latency timer to 64
pci 0000:00:0c.0: setting latency timer to 64
pci 0000:00:0d.0: setting latency timer to 64
pci 0000:00:0e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:01: resource 2 [mem 0xfea00000-0xfeafffff pref]
pci_bus 0000:01: resource 3 [io 0x0000-0xffff]
pci_bus 0000:01: resource 4 [mem 0x00000000-0xffffffff]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:02: resource 2 [mem 0xfe700000-0xfe7fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:03: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:03: resource 2 [mem 0xfe500000-0xfe5fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
pci_bus 0000:04: resource 1 [mem 0xfe400000-0xfe4fffff]
pci_bus 0000:04: resource 2 [mem 0xfe300000-0xfe3fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
pci_bus 0000:05: resource 1 [mem 0xfe200000-0xfe2fffff]
pci_bus 0000:05: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0b.0: Linking AER extended capability
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0c.0: Linking AER extended capability
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0d.0: Linking AER extended capability
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Found disabled HT MSI Mapping
pci 0000:00:00.0: Found enabled HT MSI Mapping
pci 0000:00:0e.0: Linking AER extended capability
pci 0000:05:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 1858k freed
highmem bounce pool size: 64 pages
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1732
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:0b.0: setting latency timer to 64
pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
pcieport 0000:00:0c.0: setting latency timer to 64
pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
pcieport 0000:00:0d.0: setting latency timer to 64
pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
pcieport 0000:00:0e.0: setting latency timer to 64
pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12b
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
sata_nv 0000:00:07.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
sata_nv 0000:00:07.0: setting latency timer to 64
scsi0 : sata_nv
scsi1 : sata_nv
ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xf600 irq 23
ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf608 irq 23
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
sata_nv 0000:00:08.0: setting latency timer to 64
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xf100 irq 22
ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xf108 irq 22
pata_amd 0000:00:06.0: version 0.4.1
pata_amd 0000:00:06.0: setting latency timer to 64
scsi4 : pata_amd
scsi5 : pata_amd
ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14
ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6: WDC WD2000JD-22HBC0, 08.02D08, max UDMA/133
ata1.00: 390721968 sectors, multi 16: LBA48
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD2000JD-22H 08.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata6.00: ATAPI: SONY DVD RW DW-Q28A, KYS3, max UDMA/66
ata6.01: ATAPI: SONY DVD-ROM DDU1615, FYS2, max UDMA/33
ata6: nv_mode_filter: 0x1f39f&0x1f39f->0x1f39f, BIOS=0x1f000 (0xc5c0) ACPI=0x1f01f (30:60:0x1f)
ata6: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc5c0) ACPI=0x701f (30:60:0x1f)
ata6.00: configured for UDMA/66
ata6.01: configured for UDMA/33
scsi 5:0:0:0: CD-ROM SONY DVD RW DW-Q28A KYS3 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
scsi 5:0:1:0: CD-ROM SONY DVD-ROM DDU1615 FYS2 PQ: 0 ANSI: 5
sr1: scsi3-mmc drive: 4x/40x cd/rw xa/form2 cdda tray
sr 5:0:1:0: Attached scsi CD-ROM sr1
Freeing unused kernel memory: 328k freed
FDC 0 is a post-1991 82077
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:02.1: setting latency timer to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:02.1: debug port 1
ehci_hcd 0000:00:02.1: cache line size of 32 is not supported
ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:02.0: setting latency timer to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:02.0: irq 20, io mem 0xfebff000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
aufs 2-standalone.tree-33-20100329
fuse init (API version 7.13)
usb 1-5: new high speed USB device using ehci_hcd and address 2
scsi6 : usb-storage 1-5:1.0
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb 1-7: new high speed USB device using ehci_hcd and address 3
usb 2-8: new low speed USB device using ohci_hcd and address 2
input: Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input1
generic-usb 0003:045E:0083.0001: input: USB HID v1.10 Mouse [Microsoft Basic Optical Mouse] on usb-0000:00:02.0-8/input0
scsi 6:0:0:0: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
scsi 6:0:0:1: Direct-Access USB DISK Pro PMAP PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: [sdb] 489472 512-byte logical blocks: (250 MB/239 MiB)
sd 6:0:0:1: [sdc] 2880 512-byte logical blocks: (1.47 MB/1.40 MiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:1: [sdc] Write Protect is off
sd 6:0:0:1: [sdc] Mode Sense: 23 94 00 00
sd 6:0:0:1: [sdc] Assuming drive cache: write through
usb-storage: device scan complete
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 6:0:0:1: [sdc] Assuming drive cache: write through
sdc: sdb1

sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:1: [sdc] Assuming drive cache: write through
sd 6:0:0:1: [sdc] Attached SCSI removable disk
ISO 9660 Extensions: RRIP_1991A
ISO 9660 Extensions: RRIP_1991A
aufs test_add:248:mount[1031]: uid/gid/perm /pup_ro1 0/0/0755, 0/0/01777
aufs test_add:248:mount[1031]: uid/gid/perm /pup_ro2 0/0/0755, 0/0/01777
udevd version 124 started
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (22 C)
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
ACPI: Fan [FAN] (on)
i2c i2c-0: nForce2 SMBus adapter at 0x4c00
i2c i2c-1: nForce2 SMBus adapter at 0x4c40
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
forcedeth 0000:00:0a.0: setting latency timer to 64
nv_probe: set workaround bit for reversed mac addr
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:13:d3:9b:7f:00
forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
acx: acx-mac80211, version: v0.6.0 (git: 9d8aa6c)
acx: this driver is still EXPERIMENTAL
acx: please read the README file and/or go to http://acx100.sourceforge.net/wiki for further information
acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
acx: running on a little-endian CPU
PCI/VLYNQ module initialized, waiting for cards to probe...
acx: mutex_init(&adev->mutex); // adev = 0xf626a960
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
acx_pci 0000:01:08.0: PCI INT A -> Link[APC3] -> GSI 18 (level, low) -> IRQ 18
acx: found an ACX111-based wireless network card at 0000:01:08.0, irq:18, phymem1:0xFE9FE000, phymem2:0xFE9C0000, mem1:0xf8524000, mem1_size:8192, mem2:0xf8540000, mem2_size:131072
acx: the initial debug setting is 0x000A
acx: using IRQ 18: OK
acx: need firmware for acx111 chipset with radio ID 16
Please provide via firmware hotplug:
either combined firmware (single file named 'tiacx111c16')
or two files (base firmware file 'tiacx111' + radio fw 'tiacx111r16')
acx: need to load firmware for acx111 chipset with radio ID 16, please provide via firmware hotplug:
acx: either one file only (<c>ombined firmware image file, radio-specific) or two files (radio-less base image file *plus* separate <r>adio-specific extension file)
acx: requesting firmware image 'tiacx111c16'
acx_pci 0000:01:08.0: firmware: requesting tiacx111c16
input: PC Speaker as /devices/platform/pcspkr/input/input4
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
Intel ICH 0000:00:04.0: setting latency timer to 64
acx: acx_write_fw (main/combined): 0
acx: acx_validate_fw (main/combined): 0
intel8x0_measure_ac97_clock: measured 55359 usecs (2720 samples)
intel8x0: clocking to 46893
phy1: Selected rate control algorithm 'minstrel'
Registered led device: rt2800usb-phy1::radio
Registered led device: rt2800usb-phy1::assoc
Registered led device: rt2800usb-phy1::quality
usbcore: registered new interface driver rt2800usb
acx: initializing max packet templates
acx: dump queue head (from card):
acx: len: 24
acx: tx_memory_block_address: 18D60
acx: rx_memory_block_address: 12D60
acx: tx1_queue address: 12294
acx: rx1_queue address: 11F54
acx: NVS_vendor_offs:0222 probe_delay:200 eof_memory:1114112
acx: CCAModes:04 Diversity:01 ShortPreOpt:01 PBCC:01 ChanAgil:00 PHY:05 Temp:01
acx: AntennaID:00 Len:02 Data:01 02
acx: PowerLevelID:01 Len:02 Data:001E 000A
acx: DataRatesID:02 Len:05 Data:02 04 11 22 44
acx: DomainID:03 Len:06 Data:30 20 30 31 32 40
acx: ProductID:04 Len:09 Data:TI ACX100
acx: ManufacturerID:05 Len:07 Data:TI Test
acx: don't know how to get sensitivity for radio type 0x16
acx: got sensitivity value 0
acx: got antenna value 0x4A
acx: got regulatory domain 0x30
acx: new ratevector: 82 84 0B 0C 12 16 18 24 2C 30 48 60 6C
acx: chipset TNETW1130, radio type 0x16 (Radia (RC2422?)), form factor 0x01 ((mini-)PCI / CardBus), EEPROM version 0x05, uploaded firmware 'Rev 1.2.1.34'
acx: creating /proc entry driver/acx0/acx
acx: creating /proc entry driver/acx0/acx_diag
acx: creating /proc entry driver/acx0/acx_eeprom
acx: creating /proc entry driver/acx0/acx_phy
acx: creating /proc entry driver/acx0/acx_debug
acx: net device phy0, driver compiled against wireless extensions 22 and Linux 2.6.33.2
phy0: Selected rate control algorithm 'minstrel'
acx: USB module initialized, probing for devices...
usbcore: registered new interface driver acx_usb
eth0: no link during initialization.
rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
acx: updating initial settings on iface activation
acx: an important setting has been changed. The packet templates must also be updated
acx: updating packet templates
acx: updating Tx fallback to 0 retries
acx: updating the transmit power: 15 dBm
acx: updating antenna value: 0x4A
acx: pdating the Energy Detect (ED) threshold: 0
acx: acx111 doesn't support ED
acx: updating the Channel Clear Assessment (CCA) value: 0x00
acx: acx111 doesn't support CCA
acx: updating channel to: 1
acx: updating the short retry limit: 7, long retry limit: 4
acx: updating the tx MSDU lifetime: 4096
acx: updating the regulatory domain: 0x30
acx: updating WEP key settings
acx: acx_e_op_add_interface: vif_type=0002
acx: acx_s_select_opmode: NL80211_IFTYPE_STATION
acx: Virtual interface added (type: 0x00000002, MAC: 00:12:0E:11:42:93)
acx: acx_e_op_config: IEEE80211_CONF_CHANGE_POWER not implemented
acx: acx_s_select_opmode: NL80211_IFTYPE_MONITOR else
acx: an important setting has been changed. The packet templates must also be updated
acx: updating packet templates
acx: Virtual interface removed: type=2, MAC=00:12:0E:11:42:93
acxpci: closed device
eth0: no link during initialization.
rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
rt2800usb 1-7:1.0: firmware: requesting rt2870.bin
phy1 -> rt2x00lib_request_firmware: Error - Failed to request Firmware.
acx: updating initial settings on iface activation
acx: an important setting has been changed. The packet templates must also be updated
acx: updating packet templates
acx: updating Tx fallback to 0 retries
acx: updating the transmit power: 15 dBm
acx: updating antenna value: 0x4A
acx: pdating the Energy Detect (ED) threshold: 0
acx: acx111 doesn't support ED
acx: updating the Channel Clear Assessment (CCA) value: 0x00
acx: acx111 doesn't support CCA
acx: updating channel to: 1
acx: updating the short retry limit: 7, long retry limit: 4
acx: updating the tx MSDU lifetime: 4096
acx: updating the regulatory domain: 0x30
acx: updating WEP key settings
acx: acx_e_op_add_interface: vif_type=0002
acx: acx_s_select_opmode: NL80211_IFTYPE_STATION
acx: an important setting has been changed. The packet templates must also be updated
acx: updating packet templates
acx: Virtual interface added (type: 0x00000002, MAC: 00:12:0E:11:42:93)
acx: acx_e_op_config: IEEE80211_CONF_CHANGE_POWER not implemented
acx: acx_s_select_opmode: NL80211_IFTYPE_MONITOR else
acx: an important setting has been changed. The packet templates must also be updated
acx: updating packet templates
acx: Virtual interface removed: type=2, MAC=00:12:0E:11:42:93
acxpci: closed device
eth0: no link during initialization.
Back to top
View user's profile Send_private_message 
rcrsn51


Joined: 05 Sep 2006
Posts: 9027
Location: Stratford, Ontario

PostPosted: Sun 18 Nov 2012, 10:57    Post_subject: Re: Viewing hard drive contents when using Puppy  

Horatio wrote:
I ran Gparted as suggested and then selected scan ll drives, it comes up with :-

Partition = unallocated
File system = unallocated

Quote:
does this suggest the hard drive is toast?

It may not be mechanically dead. But its filesystem has gotten badly corrupted.

There are programs around like testdisk that may be able to recover some data from the drive.
Back to top
View user's profile Send_private_message 
Display_posts:   Sort by:   
Page 1 of 2 Posts_count   Goto page: 1, 2 Next
Post_new_topic   Reply_to_topic View_previous_topic :: View_next_topic
 Forum index » House Training » Beginners Help ( Start Here)
Jump to:  

Rules_post_cannot
Rules_reply_cannot
Rules_edit_cannot
Rules_delete_cannot
Rules_vote_cannot
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group
[ Time: 0.1982s ][ Queries: 12 (0.0047s) ][ GZIP on ]