Openbox+Extras 1.1.2 (2013-03-01)
For Spanish speakers, this tiny .pet translates the Shutdown entries in the Openbox menu. It is not included in the package because these scripts haven't got an internationalization method applied yet:
Para hispanoablantes, este .pet diminuto traduce las entradas de Apagar en el menú de Openbox. No se incluye en el paquete porque estos scripts no tienen un método de internacionalización aplicado todavía:
Para hispanoablantes, este .pet diminuto traduce las entradas de Apagar en el menú de Openbox. No se incluye en el paquete porque estos scripts no tienen un método de internacionalización aplicado todavía:
- Attachments
-
- openbox_menu-es-001.pet
- (889 Bytes) Downloaded 681 times
-
- capture13312.png
- (137.3 KiB) Downloaded 1203 times
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Openbox+Extras 1.1 (2013-02-06)
Where is my sda1 icon ?
edited:
--- and why does CTRL-Alt-BACKSPACE not work ?
edited:
--- and why does CTRL-Alt-BACKSPACE not work ?
- Attachments
-
- 1st_drive_icon.png
- (16.38 KiB) Downloaded 1202 times
Re: Openbox+Extras 1.1 (2013-02-06)
I'm sorry, the Tint2 panel does hide an icon, which for most users happens to be the floppy drive icon -- no one uses it, and few people remove it from the Event Manager. But, you can change the panel to bottom position from the Menu > Desktop > Tint2 configuration, then you will be able to see all drive icons above the panel.L18L wrote:Where is my sda1 icon ?
That's a heavy one, I'll investigate. What Puppy are you running? Does it happen with both panels or just with Tint2 panel?L18L wrote:--- and why does CTRL-Alt-BACKSPACE not work ?
BTW, for Wary 5.3 Tint2 requires libjpeg.so.8 to work, the libjpeg.pet from the Wary repo doesn't solve this. I haven't found a suitable package yet (all I find is 64bit packages, I need a 32bit one). Meanwhile, for Wary/Racy users Lxpanel is recommended.
- Attachments
-
- capture4229.jpg
- (11.35 KiB) Downloaded 1145 times
Last edited by vicmz on Thu 07 Feb 2013, 21:00, edited 1 time in total.
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
I have just noticed that two launchers in the Tint2 panel lack icons.
I have uploaded the main openbox_plus_extras-1.1.pet package again with a fix for that. Those who have downloaded the fat edition, however, will have to download the Tint2 panel .pet ↓.
You can also open the launcher files in geany:
/usr/share/tint2/facebook.desktop
/usr/share/tint2/twitter.deskop
And change the icon path to:
Icon=/usr/share/tint2/FaceBook_48x48.png
Icon=/usr/share/tint2/Twitter_48x48.png
Until I manage to get a broadband spot where to upload the 24MB .pet file with the fix.
I have uploaded the main openbox_plus_extras-1.1.pet package again with a fix for that. Those who have downloaded the fat edition, however, will have to download the Tint2 panel .pet ↓.
You can also open the launcher files in geany:
/usr/share/tint2/facebook.desktop
/usr/share/tint2/twitter.deskop
And change the icon path to:
Icon=/usr/share/tint2/FaceBook_48x48.png
Icon=/usr/share/tint2/Twitter_48x48.png
Until I manage to get a broadband spot where to upload the 24MB .pet file with the fix.
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
Re: Openbox+Extras 1.1 (2013-02-06)
Sorry, I wasn't able to reproduce the bug, Ctrl-Alt-Backspace works for me in Precise (I assume you're using Precise or a Precise-based derivative because of the speaker icon -- Tint2 doesn't work in Wary/Racy and Slacko doesn't have that speaker icon design). Could you give more details?L18L wrote:why does CTRL-Alt-BACKSPACE not work ?
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Openbox+Extras 1.1 (2013-02-06)
Now I see that it not only sda1 icon but alsovicmz wrote:I'm sorry, the Tint2 panel does hide an icon, which for most users happens to be the floppy drive icon -- no one uses it, and few people remove it from the Event Manager. But, you can change the panel to bottom position from the Menu > Desktop > Tint2 configuration, then you will be able to see all drive icons above the panel..L18L wrote:Where is my sda1 icon ?
file
write
browse
....
These could automatically be moved to right! Right
--------
CTRL-Alt-BACKSPACE
I am using precise 5.4.3
Re: Openbox+Extras 1.1 (2013-02-06)
Do you mean you can't see the panel launchers, you want to move the panel vertically to the right of the screen, or you want to move the launchers to the right of the panel?L18L wrote: Now I see that it not only sda1 icon but also
file
write
browse
....
These could automatically be moved to right! Right
--------
CTRL-Alt-BACKSPACE
I am using precise 5.4.3
I'm using Precise 5.4.3, too. Ctrl+Alt+Backspace works for me. I wonder what's wrong?
Last edited by vicmz on Thu 07 Feb 2013, 23:36, edited 1 time in total.
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
The Tint2 configuration file is /root/.config/tint2/tint2rc, if at line 49 you set this value:
and restart X, the panel moves to the top of the screen, making all drive icons visible. I tried to move the panel to the right but I got a broken left panel instead. I'll ask nilsonmorales and josejp2424 how to include top and right position options.panel_position = top center horizontal
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
las configuraciones están en , /root/.config/tint2
para poner la barra arriba .
para poner la barra arriba
tint2rc
panel a la izquierda .
vicmz traducelo amigo.
para poner la barra arriba .
para poner la barra arriba
tint2rc
Code: Select all
#---------------------------------------------
# PANEL
#---------------------------------------------
panel_position = top center
Code: Select all
#---------------------------------------------
# PANEL
#---------------------------------------------
panel_position = right top vertical
It's what I explained above. The only position that doesn't work is Right, after applying the panel stays on the left and becomes ugly. Else work well.josejp2424 wrote:the configurations are in /root/.config/tint2
to put the bar to the top
tint2rc
panel to the left (you mean to the right, don't you? - quieres decir a la derecha, no?).Code: Select all
#--------------------------------------------- # PANEL #--------------------------------------------- panel_position = top center
Code: Select all
#--------------------------------------------- # PANEL #--------------------------------------------- panel_position = right top vertical
Es lo que expliqué arriba. La única posición que no funciona es la Derecha, después de aplicar el panel queda a la izquierda y se pone feo. Las demás funcionan bien.
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Openbox+Extras 1.1 (2013-02-06)
add width of new panel to every x in $HOME/Choices/ROX-Filer/PuppyPinvicmz wrote:Do you mean you can't see the panel launchers, you want to move the panel vertically to the right of the screen, or you want to move the launchers to the right of the panel?L18L wrote: Now I see that it not only sda1 icon but also
file
write
browse
....
These could automatically be moved to right! Right
--------
CTRL-Alt-BACKSPACE
I am using precise 5.4.3
Re: Openbox+Extras 1.1 (2013-02-06)
I edited PuppyPin so that the drive icons start at 96, then restarted X. Back to the desktop, the floppy disk icon was missing, and the sda icon behind the panel. I'll keep testing.L18L wrote: add width of new panel to every x in $HOME/Choices/ROX-Filer/PuppyPin
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
- L18L
- Posts: 3479
- Joined: Sat 19 Jun 2010, 18:56
- Location: www.eussenheim.de/
Re: Openbox+Extras 1.1 (2013-02-06)
Using this script I have moved the icons to rightL18L wrote:add width of new panel to every x in $HOME/Choices/ROX-Filer/PuppyPinvicmz wrote:Do you mean you can't see the panel launchers, you want to move the panel vertically to the right of the screen, or you want to move the launchers to the right of the panel?L18L wrote: Now I see that it not only sda1 icon but also
file
write
browse
....
These could automatically be moved to right! Right
--------
CTRL-Alt-BACKSPACE
I am using precise 5.4.3
Code: Select all
# PuppyPin.sh 50
Have fun
/root/my-applications/bin/PuppyPin.sh wrote:#!/bin/sh
# move icons on desktop
# 2013-02-09
#
PIN=$HOME/Choices/ROX-Filer/PuppyPin
check_input(){
N="$1"
if [ "${N:0:1}" = "-" ]; then
AMOUNT=${N:1}
DIR='left'
else
[ "${N:0:1}" = "+" ] && N=${N:1}
AMOUNT=${N}
DIR='right'
fi
case $AMOUNT in
*[!0-9]* | "") IS_INTEGER=false ;;
*) IS_INTEGER=true ;;
esac
}
check_input $1
while [ $IS_INTEGER = false ]; do
read -p "Enter pixels to move [ex: -56] : "
check_input $REPLY
done
echo move icons $AMOUNT pixels to $DIR, but please not outside of screen!
RES=`xrandr 2>/dev/null| grep '*' | awk '{print $1}'` # resolution
RESx=${RES%%x*}; RESy=${RES#*x} # echo RESx=$RESx RESy=$RESy
mv $PIN $PIN.backup
while read LINE; do #ex:<icon x="416" y="32" label="console">/usr/bin/urxvt</icon>
case $LINE in
*icon\ x*)
x_old=`echo $LINE | cut -d'"' -f2`
case $DIR in
right) x_new=$(( $x_old + $AMOUNT )); [[ $x_new -ge $RESx ]] && x_new=$x_old ;;
left) x_new=$(( $x_old - $AMOUNT )); [[ $x_new -le 0 ]] && x_new=$x_old ;;
esac
[ $x_new -ne $x_old ] && LINE=`echo $LINE | sed -r "s#icon x="$x_old#icon x="$x_new#"`
;;
*) # nothing to change
;;
esac
echo $LINE >> $PIN
done < $PIN.backup
rox --pinboard=$PIN # refresh
- Attachments
-
- icons_moved_X.png
- (70.21 KiB) Downloaded 964 times
That's good news!Tote wrote:vicmz, thank you for this! Downloaded the fat pet version, using LX panel, working well on Wary5.2.2. Problem free at this stage.
Remember you can customize the panel by right-clicking it then choosing Panel Configuration. In the Appearance tab you can choose between apply the current GTK theme, apply a solid colour with opacity (set opacity to zero for a transparent panel), and apply a background image (for this one you'll have to set the panel height to fit the background.png because the latter has a lower height).
You can also right-click the panel then select Create New Panel, put the new panel opposite the taskbar, add the Application Tray plugin and put your favourite programs, the new panel will act as a dock (see the screen captures in the first post).
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]
- josejp2424
- Posts: 556
- Joined: Sun 01 Aug 2010, 22:35
- Contact:
Thanks for packaging this, great to see good Openbox support on Puppy.
Added to Wiki
http://puppylinux.org/wikka/OpenBoxExtra
Added to Wiki
http://puppylinux.org/wikka/OpenBoxExtra
new version 1.1.2
lxpanel bug fixed by 01micko (lxpanelctl breaks the panel when reloading in transparent mode).
I was unable to update the fat version, still no broadband spot available for me. Downloading or uploading files heavier than 10 MB overheats the battery of my phone and is a difficult task on a very slow connection.
lxpanel bug fixed by 01micko (lxpanelctl breaks the panel when reloading in transparent mode).
I was unable to update the fat version, still no broadband spot available for me. Downloading or uploading files heavier than 10 MB overheats the battery of my phone and is a difficult task on a very slow connection.
Thanksdarkcity wrote:Added to Wiki
[url=http://murga-linux.com/puppy/viewtopic.php?t=76948]Puppy Linux en español[/url]