The official Puppy Linux Precise 5.7.1 was first released on Aug 3, 2013 with kernel 3.9.11 (retro version kernel 3.2.48 ). On Aug 5, 2013 I posted a message saying that the Chinese Language pets for precise 5.7: precise-5.7-zhxx-xxxx-7.2.1.pet can handle precise 5.7.1 already.
I have just created these new Chinese Language pets for precise 5.7.1:
precise-5.7.1-zhhk-8.0.1.pet (2.7 mb) for Traditional Chinese
precise-5.7.1-zhcn-8.0.1.pet (2.7 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
Chinese Language Pets
Further to my post on Feb 25, 2014 about Fatdog64 630 final, version 631 was released by Kirk and James on May 12, 2014.
Changes from 630:
Updates:
* Firefox-29.0
* Seamonkey-2.26
* Flashplayer-11.2.202.356
New Features:
* Multisession now also supports device
uuid (old format still supported)
* Savefile.sh: option to create ext4 without journal (thanks mavrothal)
* Add options to boot Fatdog on low memory machines (kernel boot param: rootfstype=ramfs)
* Edit acpi action scripts add switch debounce and shutdown confirm dialog.
* Disable auto connect to unknown open network in wpa_supplicant.conf
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=91937
download fatdog64-631.iso (248 mb): http://distro.ibiblio.org/fatdog/iso
I have made 2 new Chinese Language pets for fatdog64 631:
Traditional Chinese: fatdog64-631-zhhk-1.0.1.pet （0.7 mb）
Simplified Chinese: fatdog64-631-zhcn-1.0.1.pet（1.2 mb）
These were uploaded to the public sharing folder (see first post of this subject for the download addresses)
To use them:
1. first install one of the 64bit half-Chinese Language pets (to obtain Chinese fonts and Chinese input platform) :
a. for fcitx input platform: fcitx64-420-en-zh-1.0.0.pet （6.6 mb）or
b. for SCIM input platform: SCIM64-1414-en-zh-1.0.1.pet（9.8 mb）
For more details about these 64bit half-Chinese Language pets, see the posting on Jan 22, 2014
2. then install either one of the above Chinaese Language pets to get the Chinese desktop, menus and sub-menus (Traditional or Simplified Chinese)
Changes from 630:
Updates:
* Firefox-29.0
* Seamonkey-2.26
* Flashplayer-11.2.202.356
New Features:
* Multisession now also supports device
uuid (old format still supported) * Savefile.sh: option to create ext4 without journal (thanks mavrothal)
* Add options to boot Fatdog on low memory machines (kernel boot param: rootfstype=ramfs)
* Edit acpi action scripts add switch debounce and shutdown confirm dialog.
* Disable auto connect to unknown open network in wpa_supplicant.conf
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=91937
download fatdog64-631.iso (248 mb): http://distro.ibiblio.org/fatdog/iso
I have made 2 new Chinese Language pets for fatdog64 631:
Traditional Chinese: fatdog64-631-zhhk-1.0.1.pet （0.7 mb）
Simplified Chinese: fatdog64-631-zhcn-1.0.1.pet（1.2 mb）
These were uploaded to the public sharing folder (see first post of this subject for the download addresses)
To use them:
1. first install one of the 64bit half-Chinese Language pets (to obtain Chinese fonts and Chinese input platform) :
a. for fcitx input platform: fcitx64-420-en-zh-1.0.0.pet （6.6 mb）or
b. for SCIM input platform: SCIM64-1414-en-zh-1.0.1.pet（9.8 mb）
For more details about these 64bit half-Chinese Language pets, see the posting on Jan 22, 2014
2. then install either one of the above Chinaese Language pets to get the Chinese desktop, menus and sub-menus (Traditional or Simplified Chinese)
Chinese Language Pets
On Jan 26, 2014, stemsee released a number of puppy precise 5.7.1 systems. The smallest one is just a recompile of precise 5.7.1 using kernel 3.13.9 (official version is using kernel 3.9.11 and retro version 3.2.48 )
more information : https://archive.org/details/Puppy_Linux ... inux-EmSee
download iso (369.5 mb) :
https://archive.org/download/Puppy_Linu ... tEmSee.iso
I have created these new Chinese Language pets for precise 5.7.1-stemsee:
precise-5.7.1.stem-zhhk-8.0.1.pet (2.7 mb) for Traditional Chinese
precise-5.7.1.stem-zhcn-8.0.1.pet (2.7 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
more information : https://archive.org/details/Puppy_Linux ... inux-EmSee
download iso (369.5 mb) :
https://archive.org/download/Puppy_Linu ... tEmSee.iso
I have created these new Chinese Language pets for precise 5.7.1-stemsee:
precise-5.7.1.stem-zhhk-8.0.1.pet (2.7 mb) for Traditional Chinese
precise-5.7.1.stem-zhcn-8.0.1.pet (2.7 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
This is a follow up of my posting on 14 June about stemsee's precise 5.7.1 systems. On top of the basic precise 5.7.1 compiled on newer kernel, there were 2 other huge remaster isoes (2.7 gb and 3.0 gb) for stemsee precise 5.7.1. These systems were built from precise 5.7.1 and include the following extras:
JWM
KDE
Audio workstation! Ardour-3.5.74-dbg Jamin Hydrogen Jack Rack Audacity Scollily Rosegarden Patchage Jack Keyboard GXTuner LADSP Rakarrack Zynaddsubfx Qsampler Reaper ... plus much more
XBMC 12.2
Unetbootin (debian version shows all drives)
Wine 1.7.6 (two prefixes)
QQ2013
SARDU
LibreOffice 4.1
Glabels
Chrome
Skype
PPStream
GTKYoutube
KDEnlive
Bino
Scribus
Sweet Home 3D
Gimp 2.8
VLC
VirtualBox
Qemu
Games: Osmos Zaz World of Goo Briquolo SuperTuxKart Extremetuxracer Foobillard
Automatic ramdisk and ramdisksave created and maintained in /mnt/home/
more information : https://archive.org/details/Puppy_Linux ... inux-EmSee
download iso (same address as above)
Puppy-Linux-EmSee-1st-Edition.iso (3.0 G)
Puppy-Linux-EmSee571.iso (2.7 G)
I have created these new Chinese Language pets to handle these 2 (both 3g and 2.7g) precise 5.7.1-stemsee remaster isoes, and I added "stemplus" in their names :
precise-5.7.1.stemplus-zhhk-8.0.1.pet (4.3 mb) for Traditional Chinese
precise-5.7.1.stemplus-zhcn-8.0.1.pet (4.3 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
JWM
KDE
Audio workstation! Ardour-3.5.74-dbg Jamin Hydrogen Jack Rack Audacity Scollily Rosegarden Patchage Jack Keyboard GXTuner LADSP Rakarrack Zynaddsubfx Qsampler Reaper ... plus much more
XBMC 12.2
Unetbootin (debian version shows all drives)
Wine 1.7.6 (two prefixes)
QQ2013
SARDU
LibreOffice 4.1
Glabels
Chrome
Skype
PPStream
GTKYoutube
KDEnlive
Bino
Scribus
Sweet Home 3D
Gimp 2.8
VLC
VirtualBox
Qemu
Games: Osmos Zaz World of Goo Briquolo SuperTuxKart Extremetuxracer Foobillard
Automatic ramdisk and ramdisksave created and maintained in /mnt/home/
more information : https://archive.org/details/Puppy_Linux ... inux-EmSee
download iso (same address as above)
Puppy-Linux-EmSee-1st-Edition.iso (3.0 G)
Puppy-Linux-EmSee571.iso (2.7 G)
I have created these new Chinese Language pets to handle these 2 (both 3g and 2.7g) precise 5.7.1-stemsee remaster isoes, and I added "stemplus" in their names :
precise-5.7.1.stemplus-zhhk-8.0.1.pet (4.3 mb) for Traditional Chinese
precise-5.7.1.stemplus-zhcn-8.0.1.pet (4.3 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
Besides recompiled precise 5.7.1, stemsee also compiled debian wheezy 3.5.9.2 using woof ce, using kernel 3.13.9-emsee-pae.
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=93412
download Wheezy-3.5.2.9-ce-byStemsee.iso (188 mb): https://drive.google.com/file/d/0B4GhZV ... edit?usp=1
I have created these new Chinese Language pets for wheezy 3.5.2.9 by stemsee:
wheezy-3.5.2.9.stem-zhhk-8.0.1.pet (2.5 mb) for Traditional Chinese
wheezy-3.5.2.9.stem-zhcn-8.0.1.pet (2.5 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=93412
download Wheezy-3.5.2.9-ce-byStemsee.iso (188 mb): https://drive.google.com/file/d/0B4GhZV ... edit?usp=1
I have created these new Chinese Language pets for wheezy 3.5.2.9 by stemsee:
wheezy-3.5.2.9.stem-zhhk-8.0.1.pet (2.5 mb) for Traditional Chinese
wheezy-3.5.2.9.stem-zhcn-8.0.1.pet (2.5 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
On Mar 19, 2014, Tman released a Puppy derivative based on Slacko 5.7 called JXS (JWM, Xfce4-panel and Slacko).
JXS version 3 has JWM and Xfce4 desktop plus openoffice 4.0.
Known issues:
1. I cannot run JXS v3 using frugal install
2. when I run JXS v3 from a USB stick, the USB mouse did not work
3. I was able to run JXS v3 after I burnt the JXS iso to a cd and boot the computer from the cd
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=92693
Download : JXS_5.7_version3.iso (160 mb) http://www.smokey01.com/Tman/JXS_5.7_version3.iso
I have created these new Chinese Language pets for JXS 5.7:
JXS-5.7-zhhk-8.0.1.pet (3.7 mb) for Traditional Chinese
JXS-5.7-zhcn-8.0.1.pet (4.1 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
JXS version 3 has JWM and Xfce4 desktop plus openoffice 4.0.
Known issues:
1. I cannot run JXS v3 using frugal install
2. when I run JXS v3 from a USB stick, the USB mouse did not work
3. I was able to run JXS v3 after I burnt the JXS iso to a cd and boot the computer from the cd
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=92693
Download : JXS_5.7_version3.iso (160 mb) http://www.smokey01.com/Tman/JXS_5.7_version3.iso
I have created these new Chinese Language pets for JXS 5.7:
JXS-5.7-zhhk-8.0.1.pet (3.7 mb) for Traditional Chinese
JXS-5.7-zhcn-8.0.1.pet (4.1 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
On Feb 20, 2014, I released the Chinese Language pets for Quirky-tahr 6.0.5. A bug was found shortly afterward -- seamonkey cannot start after the Chinese Language pets were installed. At that time, a temporary solution was offered by using another web browser firefox. I have recently fixed the bug and have made some new Chinese Language pets for quirky-tahr 6.0.5.
more information about quirky-tahr: http://bkhome.org/news/?viewDetailed=00064
download latest tahr-6.0.5.usfs.xz (175 mb): http://distro.ibiblio.org/quirky/quirky ... ahr-6.0.5/
To use these Chinese Language pets:
1. To add Chinese fonts and Chinese input platform for quirky-tahr 6.0.5:
a. install the zh-gtk patch pet: quirky-tahr-6.0.5-zh-gtk.patch.pet (3.8 mb)，and
b. install either the fictx or SCIM universal half-Chinese Language pets. The latest half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
These zh-gtk patch pet and universal half-Chinese Language pets are stored in the half-Chinese Language pet folder
2. To add Chinese fonts and Chinese input platform; plus Chinese desktop and menus for quirky-tahr 6.0.5:
c. install 1a and 1b above，and
d. install either the Traditional Chinese or Simplified Chinese Language pets below:
Traditional Chinese: quirky-tahr-6.0.5-zhhk-8.0.1.pet (2.5 mb available in the Traditional Chinese folder)
Simplified Chinese: quirky-tahr-6.0.5-zhcn-8.0.1.pet (2.8 mb available in the Simplified Chinese folder)
These zh-gtk patch pet, universal half-Chinese Language pets and Chinese Language pets are now available for download from the public sharing folders. Please see the first post of this subject for the download addresses
more information about quirky-tahr: http://bkhome.org/news/?viewDetailed=00064
download latest tahr-6.0.5.usfs.xz (175 mb): http://distro.ibiblio.org/quirky/quirky ... ahr-6.0.5/
To use these Chinese Language pets:
1. To add Chinese fonts and Chinese input platform for quirky-tahr 6.0.5:
a. install the zh-gtk patch pet: quirky-tahr-6.0.5-zh-gtk.patch.pet (3.8 mb)，and
b. install either the fictx or SCIM universal half-Chinese Language pets. The latest half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
These zh-gtk patch pet and universal half-Chinese Language pets are stored in the half-Chinese Language pet folder
2. To add Chinese fonts and Chinese input platform; plus Chinese desktop and menus for quirky-tahr 6.0.5:
c. install 1a and 1b above，and
d. install either the Traditional Chinese or Simplified Chinese Language pets below:
Traditional Chinese: quirky-tahr-6.0.5-zhhk-8.0.1.pet (2.5 mb available in the Traditional Chinese folder)
Simplified Chinese: quirky-tahr-6.0.5-zhcn-8.0.1.pet (2.8 mb available in the Simplified Chinese folder)
These zh-gtk patch pet, universal half-Chinese Language pets and Chinese Language pets are now available for download from the public sharing folders. Please see the first post of this subject for the download addresses
Chinese Language Pets
ETP released a Puppy derivative "Blue Pup" on Mar 3, 2014. The latest is version 4 released on May 9, 2014. Blue Pup is based on Quirky Tahr version 6.0.5 k3-12-6. Besides the normal Puppy desktop, it has a Windows 8.1 like desktop using the Chromium browser and extension. Like quirky-tahr, it needs to be installed to a USB2 or USB3 stick with minimum size 8GB.
Blue Pup features:
quirky-tahr 6.0.5
xdotool-2.20110530.1-3 by Stu90
PupControl-2.3 by radky
cursor_themes-1-1
PupSnap-1.8_Scrot-0.8_32Bit by radky
PupClockset-2.2.1 by radky
getflash-1.5-1 by shinobar
thunderbird-24.3.0
tickr-0.6.0-i686
faenza_lrx_new
skype-4.2.0.11-wheezy by OscarTalks
chromium-codecs-ffmpeg-extra_32.0.1700.107
chromium-browser_32.0.1700.107
flashplayer11-11.2.202.341
wmctrl_1.07-7
metro tab Chrome extension version 1.0.1
more information: http://murga-linux.com/puppy/viewtopic.php?t=92371
download Blue Pup V4: http://www.puppylinuxstuff.meownplanet.net/ETP/
I have made some new Chinese Language pets for Blue Pup V4.
To use these Chinese Language pets:
1. To get Chinese fonts and Chinese input platform for Blue Pup V4:
a. install the zh-gtk patch pet: blue_pup-4-zh-gtk.patch.pet (3.8 mb)，and
b. install either the fictx or SCIM universal half-Chinese Language pets. The latest half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
These zh-gtk patch pet and universal half-Chinese Language pets are stored in the public sharing half-Chinese Language pet folder
2. To get Chinese fonts and Chinese input platform; plus Chinese desktop and menus for Blue Pup V4:
c. install 1a and 1b above，and
d. install either the Traditional Chinese or Simplified Chinese Language pets below:
Traditional Chinese: blue_pup-4-zhhk-8.0.1.pet (2.5 mb available in the Traditional Chinese folder)
Simplified Chinese: blue_pup-4-zhcn-8.0.1.pet (2.9 mb available in the Simplified Chinese folder)
These zh-gtk patch pet, universal half-Chinese Language pets and Chinese Language pets are now available for download from the public sharing folders. Please see the first post of this subject for the download addresses
Blue Pup features:
quirky-tahr 6.0.5
xdotool-2.20110530.1-3 by Stu90
PupControl-2.3 by radky
cursor_themes-1-1
PupSnap-1.8_Scrot-0.8_32Bit by radky
PupClockset-2.2.1 by radky
getflash-1.5-1 by shinobar
thunderbird-24.3.0
tickr-0.6.0-i686
faenza_lrx_new
skype-4.2.0.11-wheezy by OscarTalks
chromium-codecs-ffmpeg-extra_32.0.1700.107
chromium-browser_32.0.1700.107
flashplayer11-11.2.202.341
wmctrl_1.07-7
metro tab Chrome extension version 1.0.1
more information: http://murga-linux.com/puppy/viewtopic.php?t=92371
download Blue Pup V4: http://www.puppylinuxstuff.meownplanet.net/ETP/
I have made some new Chinese Language pets for Blue Pup V4.
To use these Chinese Language pets:
1. To get Chinese fonts and Chinese input platform for Blue Pup V4:
a. install the zh-gtk patch pet: blue_pup-4-zh-gtk.patch.pet (3.8 mb)，and
b. install either the fictx or SCIM universal half-Chinese Language pets. The latest half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
These zh-gtk patch pet and universal half-Chinese Language pets are stored in the public sharing half-Chinese Language pet folder
2. To get Chinese fonts and Chinese input platform; plus Chinese desktop and menus for Blue Pup V4:
c. install 1a and 1b above，and
d. install either the Traditional Chinese or Simplified Chinese Language pets below:
Traditional Chinese: blue_pup-4-zhhk-8.0.1.pet (2.5 mb available in the Traditional Chinese folder)
Simplified Chinese: blue_pup-4-zhcn-8.0.1.pet (2.9 mb available in the Simplified Chinese folder)
These zh-gtk patch pet, universal half-Chinese Language pets and Chinese Language pets are now available for download from the public sharing folders. Please see the first post of this subject for the download addresses
Chinese Language Pets
Can Bike OS 5.7.1 was released by CANbike.ca on Apr 13, 2014. It is based on precise 5.7.1 plus these key changes:
double mouse clicks for launching programs and viewing folders and files
Set default time zone to Canadian Eastern Time (EST).
JWM task bar to show day of the week, date (MM/DD/YY), and 12-hour clock time.
Set DPI to 78
Set page zoom to 110%
Removed SeaMonkey and use Chromium
New fonts from Red Hat and League of Moveable TypeNano – A command line text editor.
EncFS – An encrypted filesystem.
PAR2 – PAR2 parity file creator and checker
Parchive – PAR parity file creator and checker.
ImageMagick – Command line image manipulation program.
GIMP – GNU Image Manipulation Program.
sleep mode on/off on desktop
more information: http://www.canbike.org/off-topic/linux/ ... 5-7-1.html
download iso 223 mb : http://www.canbike.org/public/linux/can_bike-5.7.1.iso
I have created these new Chinese Language pets for can_bike 5.7.1:
can_bike-5.7.1-zhhk-8.0.1.pet (2.7 mb) for Traditional Chinese
can_bike-5.7.1-zhcn-8.0.1.pet (2.7 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
double mouse clicks for launching programs and viewing folders and files
Set default time zone to Canadian Eastern Time (EST).
JWM task bar to show day of the week, date (MM/DD/YY), and 12-hour clock time.
Set DPI to 78
Set page zoom to 110%
Removed SeaMonkey and use Chromium
New fonts from Red Hat and League of Moveable TypeNano – A command line text editor.
EncFS – An encrypted filesystem.
PAR2 – PAR2 parity file creator and checker
Parchive – PAR parity file creator and checker.
ImageMagick – Command line image manipulation program.
GIMP – GNU Image Manipulation Program.
sleep mode on/off on desktop
more information: http://www.canbike.org/off-topic/linux/ ... 5-7-1.html
download iso 223 mb : http://www.canbike.org/public/linux/can_bike-5.7.1.iso
I have created these new Chinese Language pets for can_bike 5.7.1:
can_bike-5.7.1-zhhk-8.0.1.pet (2.7 mb) for Traditional Chinese
can_bike-5.7.1-zhcn-8.0.1.pet (2.7 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.1.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
tarhpup was first released by 666philb on May 28, 2014.
Key extras on top of normal puppy distributions:
palemoon browser
deadbeef audio player
vlc media player
sylpheed
xchat
copy fast
getflash
python
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=93998
download iso
tahrpup-5.8.1.5.PAE.iso (205 mb);
tahr-5.8.2-SCSI.iso (199 mb):
https://archive.org/details/Puppy_Linux_Tahrpup
I have created these new Chinese Language pets for tahrpup-5.8.1.5 and tahr-5.8.2:
Traditional Chinese
tahrpup-5.8.1.5-zhhk-8.0.2.pet (2.5 mb)
tahr-5.8.2-zhhk-8.0.2.pet (2.5 mb)
Simplified Chinese
tahrpup-5.8.1.5-zhcn-8.0.2.pet (2.9 mb)
tahr-5.8.2-zhcn-8.0.2.pet (2.9 mb)
Because fcitx universal half-Chinese Language pet require special adjustments before it can fully functional for tahr 5.8.1.5 and 5.8.2, I have created a new fcitx-420-en-zh-8.0.2.pet. No adjustments are needed for the SCIM universal half-Chinese Language pets and the current SCIM-147-en-zh-8.0.1.pet can handle both tahr 5.8.1.5 and 5.8.2.
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Key extras on top of normal puppy distributions:
palemoon browser
deadbeef audio player
vlc media player
sylpheed
xchat
copy fast
getflash
python
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=93998
download iso
tahrpup-5.8.1.5.PAE.iso (205 mb);
tahr-5.8.2-SCSI.iso (199 mb):
https://archive.org/details/Puppy_Linux_Tahrpup
I have created these new Chinese Language pets for tahrpup-5.8.1.5 and tahr-5.8.2:
Traditional Chinese
tahrpup-5.8.1.5-zhhk-8.0.2.pet (2.5 mb)
tahr-5.8.2-zhhk-8.0.2.pet (2.5 mb)
Simplified Chinese
tahrpup-5.8.1.5-zhcn-8.0.2.pet (2.9 mb)
tahr-5.8.2-zhcn-8.0.2.pet (2.9 mb)
Because fcitx universal half-Chinese Language pet require special adjustments before it can fully functional for tahr 5.8.1.5 and 5.8.2, I have created a new fcitx-420-en-zh-8.0.2.pet. No adjustments are needed for the SCIM universal half-Chinese Language pets and the current SCIM-147-en-zh-8.0.1.pet can handle both tahr 5.8.1.5 and 5.8.2.
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
A visitor reported in the Puppy Chinese Linux forum（中文 Puppy Linux 开
Chinese Language Pets
slacko 5.9.3 was first released by 01micko on Jun 17, 2014.
besides bug fixes, major changes are:
pmusic-4.3.6
mhwaveedit-1.4.23
desk_icons_blue_moon_Slacko-1
pavrecord-0.9.4
precord-8.1.5
pup-advert-blocker-3b
pdesktop-0.1
removed -gtk-chtheme
acpid-busibox-3
mgr-0.11
mtpaint-3.44.73
mhwaveedit-1.4.23
gifsicle-1.83
abiword-3.0.0
gparted-0.19.0
sylpheed-3.4.2
squashfs-tools-4.3
musl-1.1.2
pburn-4.3.5
psync-2.10
sfs_load-2.0.8
tas-1.6
network_roxapp-0.8-1
ffmpeg-2.2.3
xvidcore-14.06.17
libvpx-14.06.17
curlftpfs-0.9.2
+gpicview-2.4
removed viewnior
firefox-24.6.0
can use slackware-14.1 packages
new woof infrastructure
complete change of how puppy boots using kernel modules and firmware in a zdrive, same as for fatdog64
new save to folder
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=94328
download slacko-5.9.3.iso (172 mb):
http://distro.ibiblio.org/puppylinux/test/slacko/
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... st/slacko/
I have created these new Chinese Language pets for slacko-5.9.3:
slacko-5.9.3-zhhk-8.0.2.pet (1.7 mb) for Traditional Chinese
slacko-5.9.3-zhcn-8.0.2.pet (2.1 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
besides bug fixes, major changes are:
pmusic-4.3.6
mhwaveedit-1.4.23
desk_icons_blue_moon_Slacko-1
pavrecord-0.9.4
precord-8.1.5
pup-advert-blocker-3b
pdesktop-0.1
removed -gtk-chtheme
acpid-busibox-3
mgr-0.11
mtpaint-3.44.73
mhwaveedit-1.4.23
gifsicle-1.83
abiword-3.0.0
gparted-0.19.0
sylpheed-3.4.2
squashfs-tools-4.3
musl-1.1.2
pburn-4.3.5
psync-2.10
sfs_load-2.0.8
tas-1.6
network_roxapp-0.8-1
ffmpeg-2.2.3
xvidcore-14.06.17
libvpx-14.06.17
curlftpfs-0.9.2
+gpicview-2.4
removed viewnior
firefox-24.6.0
can use slackware-14.1 packages
new woof infrastructure
complete change of how puppy boots using kernel modules and firmware in a zdrive, same as for fatdog64
new save to folder
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=94328
download slacko-5.9.3.iso (172 mb):
http://distro.ibiblio.org/puppylinux/test/slacko/
http://ftp.nluug.nl/ftp/pub/os/Linux/di ... st/slacko/
I have created these new Chinese Language pets for slacko-5.9.3:
slacko-5.9.3-zhhk-8.0.2.pet (1.7 mb) for Traditional Chinese
slacko-5.9.3-zhcn-8.0.2.pet (2.1 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
PuppEX 14.1 was released by exton on Dec 12, 2013
Key features:
remaster of Puppy Linux Slacko 5.6, kernel 3.10.5
LXDE Desktop
PCManFM, ROX-Filer
LXTerminal
includes devx_slacko_5.6.0.sfs
uses repositories Slackware 14.0 and Slackware 14.1
more information: http://sourceforge.net/projects/puppex/
http://murga-linux.com/puppy/viewtopic.php?t=90744
download puppex-32bit-lxde-317mb-131212.iso （318 mb）: http://sourceforge.net/projects/puppex/ ... t/download
I have created these new Chinese Language pets for PuppEX-14.1:
PuppEX-14.1-zhhk-8.0.2.pet (2.6 mb) for Traditional Chinese
PuppEX-14.1-zhcn-8.0.2.pet (3.0 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Key features:
remaster of Puppy Linux Slacko 5.6, kernel 3.10.5
LXDE Desktop
PCManFM, ROX-Filer
LXTerminal
includes devx_slacko_5.6.0.sfs
uses repositories Slackware 14.0 and Slackware 14.1
more information: http://sourceforge.net/projects/puppex/
http://murga-linux.com/puppy/viewtopic.php?t=90744
download puppex-32bit-lxde-317mb-131212.iso （318 mb）: http://sourceforge.net/projects/puppex/ ... t/download
I have created these new Chinese Language pets for PuppEX-14.1:
PuppEX-14.1-zhhk-8.0.2.pet (2.6 mb) for Traditional Chinese
PuppEX-14.1-zhcn-8.0.2.pet (3.0 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
X-slacko-2.0 and 2.1 were released by rg66 on Jun 14 and July 14 2014 respectively.
main features:
based on slacko-5.7-NO-pae
xfce-4.10.1 desktop
whisher menu - an xfce4-plugin
built using Slackware 14 repository
more information: http://murga-linux.com/puppy/viewtopic.php?t=88846
download X-slacko-2.0.iso (196 mb) and X-slacko-2.1.iso ( 196 mb):
http://carolina-linux.com/rg66/X-slacko/iso/
I have created these new Chinese Language pets for X-slacko-2.0:
Traditional Chinese
xslacko-2.0-zhhk-8.0.2.pet (1.9 mb)
xslacko-2.1-zhcn-8.0.2.pet (1.9 mb)
Simplified Chinese
xslacko-2.0-zhhk-8.0.2.pet (1.9 mb)
xslacko-2.1-zhcn-8.0.2.pet (1.9 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
main features:
based on slacko-5.7-NO-pae
xfce-4.10.1 desktop
whisher menu - an xfce4-plugin
built using Slackware 14 repository
more information: http://murga-linux.com/puppy/viewtopic.php?t=88846
download X-slacko-2.0.iso (196 mb) and X-slacko-2.1.iso ( 196 mb):
http://carolina-linux.com/rg66/X-slacko/iso/
I have created these new Chinese Language pets for X-slacko-2.0:
Traditional Chinese
xslacko-2.0-zhhk-8.0.2.pet (1.9 mb)
xslacko-2.1-zhcn-8.0.2.pet (1.9 mb)
Simplified Chinese
xslacko-2.0-zhhk-8.0.2.pet (1.9 mb)
xslacko-2.1-zhcn-8.0.2.pet (1.9 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
x-precise-2.4 was released by rg66 on Jun 28, 2014
main features:
based on precise-5.7.1
xfce-4.10 and Adrive support
more information: http://www.murga-linux.com/puppy/viewto ... &start=330
download x-precises-2.4-non-pae.iso (184 mb); x-precise-2.4-iso (179 mb): http://www.carolina-linux.com/rg66/X-precise/iso/
I have created these new Chinese Language pets for x-precise-2.4:
xprecise-2.4-zhhk-8.0.2.pet (2.5 mb) for Traditional Chinese
xprecise-2.4-zhcn-8.0.2.pet (2.7 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input
Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
main features:
based on precise-5.7.1
xfce-4.10 and Adrive support
more information: http://www.murga-linux.com/puppy/viewto ... &start=330
download x-precises-2.4-non-pae.iso (184 mb); x-precise-2.4-iso (179 mb): http://www.carolina-linux.com/rg66/X-precise/iso/
I have created these new Chinese Language pets for x-precise-2.4:
xprecise-2.4-zhhk-8.0.2.pet (2.5 mb) for Traditional Chinese
xprecise-2.4-zhcn-8.0.2.pet (2.7 mb) for Simplified Chinese
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input
Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
WorkhorseOS Puppy 4.311 was created by darry1966 on 3 May 2014
Main features:
based on updated Puppy 4.3.1 to handle newer machines and programs
of course Puppy 4.3.1 can run on many older machines （very green）
Libreoffice 4.2.3.3
Flash 10.183.90
Midori 2.22 (requires enchant.pet to run)
Firefox 24.5.0
Glibc 2.10
Qt4-4.5.3-1
Xine-lib 1.1.19 and xine ui,
sqlite 3.6.12
Glib 2.22.2
Gtk 2.18.3
pango 1.22.3
JRE 1.6
grub4dos
more information: http://www.murga-linux.com/puppy/viewto ... 54edf5725d
download WorkhorseOS(4.311version).iso (437 mb) and enchant.pet (35 kb) to run Midori :
http://sourceforge.net/projects/workhor ... 20edition/
I have made these new Chinese Language pets to handle workhorse 4.311:
workhorse-4.311-zhhk-8.0.2.pet (Traditional Chinese 3.8 mb)
workhorse-4.311-zhcn-8.0.2.pet (Simplified Chinese 4.3 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
Known issues:
the xterminal program that comes with WorkhorseOS 4.311 cannot run either fcitx or SCIM Chinese Input Platforms. The solution is to install either one of these other xterminal programs:
lxterminal.icake.pet (0.6 mb)
Roxterm.icake.pet (0.8 mb)
sakura.icake.pet (0.7 mb)
I have uploaded these 3 xterminal pets to the public sharing folder "Other Applications/ Additional pets".
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Main features:
based on updated Puppy 4.3.1 to handle newer machines and programs
of course Puppy 4.3.1 can run on many older machines （very green）
Libreoffice 4.2.3.3
Flash 10.183.90
Midori 2.22 (requires enchant.pet to run)
Firefox 24.5.0
Glibc 2.10
Qt4-4.5.3-1
Xine-lib 1.1.19 and xine ui,
sqlite 3.6.12
Glib 2.22.2
Gtk 2.18.3
pango 1.22.3
JRE 1.6
grub4dos
more information: http://www.murga-linux.com/puppy/viewto ... 54edf5725d
download WorkhorseOS(4.311version).iso (437 mb) and enchant.pet (35 kb) to run Midori :
http://sourceforge.net/projects/workhor ... 20edition/
I have made these new Chinese Language pets to handle workhorse 4.311:
workhorse-4.311-zhhk-8.0.2.pet (Traditional Chinese 3.8 mb)
workhorse-4.311-zhcn-8.0.2.pet (Simplified Chinese 4.3 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
Known issues:
the xterminal program that comes with WorkhorseOS 4.311 cannot run either fcitx or SCIM Chinese Input Platforms. The solution is to install either one of these other xterminal programs:
lxterminal.icake.pet (0.6 mb)
Roxterm.icake.pet (0.8 mb)
sakura.icake.pet (0.7 mb)
I have uploaded these 3 xterminal pets to the public sharing folder "Other Applications/ Additional pets".
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
Besides WorkhorseOS 4.311 (437 mb by darry1966), here are 2 more updated 4.3.1 puppy:
A tiny barebone pup 4.3.1 max (84 mb by rerwin) and a normal size pup 4.3.2 updated (114 mb by ttuuxxx). These were also updated to handle newer programs and machines. Of course the beauty of pup 4.3.x is to give old machines a new life.
pup 4.3.1 max is a barebone system that has been updated with
4.311 updates by rerwin
gtk
pango
glibc 2.10
it can boot up a gui desktop, but has none of these:
word processor
editor geany, leafpad
spreadsheet
web browser
So is ideal for building your own system next from scratch.
pup 4.3.2 updated comes with the normal puppy programs and has
abiword
geany
seamonkey
gnumeric
and is good to extend the life of old machines.
For more information and download:
pup 4.3.1 max
http://sourceforge.net/projects/dazsbar ... bc%202.10/
pup 4.3.2 updated
https://archive.org/details/4.3.2.V3
I have made these new Chinese Language pets for pup 4.3.1 max and pup 4.3.2 updated:
Traditional Chinese
pup-4.3.1max-zhhk-8.0.2.pet (2.3 mb)
pup-4.3.2up-zhhk-8.0.2.pet (2.3 mb)
Simplified Chinese
pup-4.3.1max-zhcn-8.0.2.pet (2.7 mb)
pup-4.3.2up-zhcn-8.0.2.pet (2.7 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
Known issues:
pup-4.3.1max
the xterminal program that comes with pup 4.3.1max cannot run either fcitx or SCIM Chinese Input Platforms. The solution is to install either one of these other xterminal programs:
lxterminal.icake.pet (0.6 mb)
Roxterm.icake.pet (0.8 mb)
sakura.icake.pet (0.7 mb)
I have uploaded these 3 xterminal pets to the public sharing folder "Other Applications/ Additional pets".
pup-4.3.2up
I cannot find a way to input Chinese in the xterminal under pup 4.3.2up. If anyone knows the solution, please let me know.
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
A tiny barebone pup 4.3.1 max (84 mb by rerwin) and a normal size pup 4.3.2 updated (114 mb by ttuuxxx). These were also updated to handle newer programs and machines. Of course the beauty of pup 4.3.x is to give old machines a new life.
pup 4.3.1 max is a barebone system that has been updated with
4.311 updates by rerwin
gtk
pango
glibc 2.10
it can boot up a gui desktop, but has none of these:
word processor
editor geany, leafpad
spreadsheet
web browser
So is ideal for building your own system next from scratch.
pup 4.3.2 updated comes with the normal puppy programs and has
abiword
geany
seamonkey
gnumeric
and is good to extend the life of old machines.
For more information and download:
pup 4.3.1 max
http://sourceforge.net/projects/dazsbar ... bc%202.10/
pup 4.3.2 updated
https://archive.org/details/4.3.2.V3
I have made these new Chinese Language pets for pup 4.3.1 max and pup 4.3.2 updated:
Traditional Chinese
pup-4.3.1max-zhhk-8.0.2.pet (2.3 mb)
pup-4.3.2up-zhhk-8.0.2.pet (2.3 mb)
Simplified Chinese
pup-4.3.1max-zhcn-8.0.2.pet (2.7 mb)
pup-4.3.2up-zhcn-8.0.2.pet (2.7 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese Language pets is to install the universal half-Chinese Language pets. The latest versions of universal half-Chinese Language pets are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
Known issues:
pup-4.3.1max
the xterminal program that comes with pup 4.3.1max cannot run either fcitx or SCIM Chinese Input Platforms. The solution is to install either one of these other xterminal programs:
lxterminal.icake.pet (0.6 mb)
Roxterm.icake.pet (0.8 mb)
sakura.icake.pet (0.7 mb)
I have uploaded these 3 xterminal pets to the public sharing folder "Other Applications/ Additional pets".
pup-4.3.2up
I cannot find a way to input Chinese in the xterminal under pup 4.3.2up. If anyone knows the solution, please let me know.
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
Chinese Language Pets
An updated slacko64 version 5.9.1 was released by 01micko on Jun 25, 2014.
For more information: http://murga-linux.com/puppy/viewtopic.php?t=94430
To download slacko64-5.9.1.iso (198M): http://distro.ibiblio.org/puppylinux/test/slacko64/ or
http://ftp.nluug.nl/os/Linux/distr/pupp ... /slacko64/
I have made 4 new Chinese Language pets for slacko64 5.9.1:
1. fcitx64 half Chinese pet: fcitx64-420-en-zh-1.0.2.pet (6.9 mb)
2. SCIM64 half Chinese pet: SCIM64-1414-en-zh-1.0.2.pet (9.8 mb)
3. Traditional Chinese pet: slacko64-5.9.1-zhhk-1.0.2.pet (0.7 mb)
4. Simplified Chinese pet: slacko64-5.9.1-zhcn-1.0.2.pet (1.2 mb)
To use these pets:
5. To get Chinese Input Platform (fcitx or SCIM) and Chinese fonts:
install 1 or 2 above
6. To get Chinese Input Platform (fcitx or SCIM), Chinese fonts and Chinese desktop and menus:
install (1 or 2) and (3 or 4) above
These new pets and pdf files are now available for download from the public sharing folder (see first post of this subject for the download addresses)
For more information: http://murga-linux.com/puppy/viewtopic.php?t=94430
To download slacko64-5.9.1.iso (198M): http://distro.ibiblio.org/puppylinux/test/slacko64/ or
http://ftp.nluug.nl/os/Linux/distr/pupp ... /slacko64/
I have made 4 new Chinese Language pets for slacko64 5.9.1:
1. fcitx64 half Chinese pet: fcitx64-420-en-zh-1.0.2.pet (6.9 mb)
2. SCIM64 half Chinese pet: SCIM64-1414-en-zh-1.0.2.pet (9.8 mb)
3. Traditional Chinese pet: slacko64-5.9.1-zhhk-1.0.2.pet (0.7 mb)
4. Simplified Chinese pet: slacko64-5.9.1-zhcn-1.0.2.pet (1.2 mb)
To use these pets:
5. To get Chinese Input Platform (fcitx or SCIM) and Chinese fonts:
install 1 or 2 above
6. To get Chinese Input Platform (fcitx or SCIM), Chinese fonts and Chinese desktop and menus:
install (1 or 2) and (3 or 4) above
These new pets and pdf files are now available for download from the public sharing folder (see first post of this subject for the download addresses)
Chinese Language Pets
precise 5.7.1 retro csipeszpup was released on May 9, 2014 by csipesz.
The aim is to provide decent applications within iso without relying on internet for more download applications.
key features:
based on precise 5.7.1
openbox/lxpanel
vlc mediaplayer
wine
dotpuphandler
pwidgets
dosbox
avidemux
zynaddsubfx
xvidcap
EXchess
audacity
skype
gimp
bluetooth.sfs
plus more applications in the wine's and dos folders
more information:
http://www.murga-linux.com/puppy/viewto ... 3e71f2b440
(( for some unknown reason, above url link was not accepted )))
download precise-5.7.1-retro-csipeszpup-may-2014.iso (698 mb):
http://www.firedrive.com/file/F74F93525FE41A6F
I have made 4 new Chinese Language pets to handle precise 5.7.1 retro csipeszpup:
1. fcitx half-Chinese pet: fcitx-420-en-zh-8.0.3.pet (12.3 mb)
2. SCIM half-Chinese pet: SCIM-147-en-zh-8.0.3.pet (19.9 mb)
3. Traditional Chinese pet: precise-5.7.1retrocsip-zhhk-8.0.3.pet (2.7 mb)
4. Simplified Chinese pet: precise-5.7.1retrocsip-zhcn-8.0.3.pet (3.1 mb)
To use these pets:
5. To get Chinese Input Platform (fcitx or SCIM) and Chinese fonts:
install 1 or 2 above
6. To get Chinese Input Platform (fcitx or SCIM), Chinese fonts and Chinese desktop and menus:
install (1 or 2) and (3 or 4) above
These pets are all available for download from the public sharing folders, download addresses are shown in first posting of this subject.
The aim is to provide decent applications within iso without relying on internet for more download applications.
key features:
based on precise 5.7.1
openbox/lxpanel
vlc mediaplayer
wine
dotpuphandler
pwidgets
dosbox
avidemux
zynaddsubfx
xvidcap
EXchess
audacity
skype
gimp
bluetooth.sfs
plus more applications in the wine's and dos folders
more information:
http://www.murga-linux.com/puppy/viewto ... 3e71f2b440
(( for some unknown reason, above url link was not accepted )))
download precise-5.7.1-retro-csipeszpup-may-2014.iso (698 mb):
http://www.firedrive.com/file/F74F93525FE41A6F
I have made 4 new Chinese Language pets to handle precise 5.7.1 retro csipeszpup:
1. fcitx half-Chinese pet: fcitx-420-en-zh-8.0.3.pet (12.3 mb)
2. SCIM half-Chinese pet: SCIM-147-en-zh-8.0.3.pet (19.9 mb)
3. Traditional Chinese pet: precise-5.7.1retrocsip-zhhk-8.0.3.pet (2.7 mb)
4. Simplified Chinese pet: precise-5.7.1retrocsip-zhcn-8.0.3.pet (3.1 mb)
To use these pets:
5. To get Chinese Input Platform (fcitx or SCIM) and Chinese fonts:
install 1 or 2 above
6. To get Chinese Input Platform (fcitx or SCIM), Chinese fonts and Chinese desktop and menus:
install (1 or 2) and (3 or 4) above
These pets are all available for download from the public sharing folders, download addresses are shown in first posting of this subject.
Chinese Language Pets
Further to the announcement on July 11, 2014 about tarhpup 5.8.1.5 and 5.8.2, a newer version 5.8.3 was released by 666philb on Jul 12, 2014.
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=93998
download tahrpup-5.8.3.iso (212 mb):
https://archive.org/details/Puppy_Linux_Tahrpup
or
https://www.dropbox.com/sh/k4asicw8vfgz ... bfa/latest
I have created these new Chinese Language pets for tahrpup-5.8.3
Traditional Chinese: tahrpup-5.8.3-zhhk-8.0.2.pet (2.5 mb)
Simplified Chinese: tahrpup-5.8.3-zhcn-8.0.2.pet (2.9 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese language pets is to install the universal half-Chinese Language pets. The required lowest versions of universal half-Chinese Language pets for tahrpup-5.8.3 are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
(or any of their newer versions)
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.
more information: http://www.murga-linux.com/puppy/viewtopic.php?t=93998
download tahrpup-5.8.3.iso (212 mb):
https://archive.org/details/Puppy_Linux_Tahrpup
or
https://www.dropbox.com/sh/k4asicw8vfgz ... bfa/latest
I have created these new Chinese Language pets for tahrpup-5.8.3
Traditional Chinese: tahrpup-5.8.3-zhhk-8.0.2.pet (2.5 mb)
Simplified Chinese: tahrpup-5.8.3-zhcn-8.0.2.pet (2.9 mb)
Please note that starting from version 8.0.0, the Chinese Language pets do not include Chinese font file and Chinese Input Method Platform. The recommended method to use these Chinese language pets is to install the universal half-Chinese Language pets. The required lowest versions of universal half-Chinese Language pets for tahrpup-5.8.3 are:
fcitx Chinese Input Method platform：fcitx-420-en-zh-8.0.2.pet （12 mb）
SCIM Chinese Input Method platform：SCIM-147-en-zh-8.0.1.pet （20 mb）
(or any of their newer versions)
All the above Chinese Language pets and universal half-Chinese Language pets are available to download from the public sharing folders. Please see the first post of this subject for the download addresses.