Chinese Language Pets

For efforts in internationalising Puppy and solving problems in this area
Message
Author
icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#451 Post by icake »

Sailor Enceladus released slacko 5.7.1r5693 on Dec 10, 2017 and slacko 5.7.1r5822 on Feb 1, 2018

More information:
http://www.murga-linux.com/puppy/viewto ... d7ae65fedc

Download iso:
https://www.mediafire.com/folder/kwhxksubf00ny/14.0

I have created 6 half-Chinese language pets for slacko 5.7.1 r5693 and r5822:
fcitx Chinese input platform half-Chinese pet:
fcitx_4.2.0-en-zh-precise-12.2.0.pet (24.6 mb)

scim Chinese input platform half-Chinese pet:
scim_1.4.9-en-zh-precise-12.2.0.pet (22.1 mb)

yong Chinese input platform half-Chinese pets:
yong3264_4.2.0-en-zh-precise-12.2.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.0.pet (9.5 mb)

Plus 2 Chinese language pets each for slacko 5.7.1 r5693 and r5822:
Simplified Chinese language pet:
slacko-5.7.1r5693-zhcn-12.2.0.pet (3.5 mb)
slacko-5.7.1r5822-zhcn-12.2.0.pet (3.5 mb)

Traditional Chinese language pet:
slacko-5.7.1r5693-zhhk-12.2.0.pet (2.8 mb)
slacko-5.7.1r5822-zhhk-12.2.0.pet (2.8 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in slacko 5.7.1 r5693 and r5822

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 5.7.1 r5693 and r5822

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject

for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language pets

#452 Post by icake »

01micko released a number of 32 bit and 64 bit slacko 6.9.9.9 and 7.0.0rc3 for testing in May, 2017

More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=110510

Download iso:
32bit: http://distro.ibiblio.org/puppylinux/pu ... esting/32/
64bit: http://distro.ibiblio.org/puppylinux/pu ... esting/64/

I have created 6 half-Chinese language pets each for 32/64 bits of slacko 6.9.9.9 and 7.0.0rc3:
fcitx Chinese input platform half-Chinese pet:
32 bit: fcitx_4.2.7-en-zh-raring-13.2.2.pet (25 mb)
64 bit: fcitx64_4.2.7-en-zh-raring-13.1.3.pet (23 mb)

scim Chinese input platform half-Chinese pet:
32 bit: scim_1.4.14-en-zh-raring-13.2.2.pet (23 mb)
64 bit: scim64_1.4.14-en-zh-raring-13.1.3.pet (19 mb)

yong Chinese input platform half-Chinese pets:
32 bit:
yong3264_4.2.0-en-zh-raring-13.2.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.2.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.2.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.2.2.pet (9.5 mb)
64 bit:
yong3264_4.2.0-en-zh-raring-13.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.3.pet (9.5 mb)

Plus 2 Chinese language pets each for 32/64 bits slacko 6.9.9.9 and 7.0.0rc3:
Simplified Chinese language pet:
32 bit:
slacko-700rc3k4470-zhcn-13.2.2.pet (2.0 mb)
slacko-6.9.9.9.k44LO-zhcn-13.2.2.pet (2.5 mb)
64 bit:
slacko64-6.9.9.9k44LO-zhcn-13.1.3.pet (4.0 mb)

Traditional Chinese language pet:
32 bit:
slacko-700rc3k4470-zhhk-13.2.2.pet (2.0 mb)
slacko-6.9.9.9k44LO-zhhk-13.2.2.pet (2.6 mb)
64 bit:
slacko64-6.9.9.9k44LO-zhhk-13.1.3.pet (3.8 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in slacko 6.9.9.9 and 700rc3 (use version 13.2.2 for 32 bit and 13.1.3 for 64 bit)
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 6.9.9.9 and 700rc3

for more information about the 32 bit fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
For more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language pets

#453 Post by icake »

peebee released LxPup64 17.06.0 on Jun 5, 2017

Main features:
derivate of slacko64 6.9.9.6 uefi k4.9-FF-LO
kernel 4.9.30
Firefox and libreoffice

More information:
http://murga-linux.com/puppy/viewtopic. ... &start=150

Download iso:
https://sourceforge.net/projects/lxpup/ ... o/download

I have created 6 half-Chinese language pets for LxPup64 17.06.00:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.3.pet (23 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.3.pet (19 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.3.pet (9.5 mb)

Plus 2 Chinese language pets for LxPup64 17.06.00:
Simplified Chinese:
lxpup64-17.06.00-zhcn-13.1.3.pet (2.3 mb)

Traditional Chinese:
lxpup64-17.06.00-zhhk-13.1.3.pet (1.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPup64 17.06.00
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPup64 17.06.00

For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language pets

#454 Post by icake »

peebee released LxPupSc64 18.02RC1 on Feb 19, 2018 and 18.02RC2 on Feb 21, 2018

Main features:
New Woof-CE build based on Slackware64 Current

More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=96875

Download iso:
rc2 iso: https://sourceforge.net/projects/lxpup/ ... o/download
delta rc2 from rc1: https://sourceforge.net/projects/lxpup/ ... a/download

I have created 6 half-Chinese language pets for LxPupSc64 18.02RC1 and RC2:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.4.pet (23 mb)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.4.pet (19 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.1.4.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.4.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.4.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.4.pet (9.5 mb)

Plus 2 Chinese language pets for LxPupSc64 18.02RC1:
Simplified Chinese:
lxpupsc64-18.02rc1-zhcn-13.1.4.pet (2.4 mb)
lxpupsc64-18.02rc2-zhcn-13.1.4.pet (2.4 mb)

Traditional Chinese:
lxpupsc64-18.02rc1-zhhk-13.1.4.pet (1.6 mb)
lxpupsc64-18.02rc2-zhhk-13.1.4.pet (1.6 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.02RC1 and RC2
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.02RC1 and RC2

For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language pets

#455 Post by icake »

csipesz released a big version of tahr 6.1.1 on Feb 2, 2018 based on the original tahr 6.1.1 released by Illutorium on Oct 22, 2016. mikesir also released the tahrpup 6.0.6 with the 4.1.30 kernel on Feb 11, 2018

More information:
csipesz version: http://www.murga-linux.com/puppy/viewto ... 7874a3746e
llutorium version: http://www.murga-linux.com/puppy/viewtopic.php?t=108681
mikesir version: http://www.murga-linux.com/puppy/viewtopic.php?t=112725

Download iso:
6.1.1 (144 mb) and 6.1.1 201802 (680 mb): https://archive.org/details/Puppy_Linux_TAHRLITE
6.0.6.k4130 (391 mb): http://www.mediafire.com/file/cc6m3wc6w ... 0-uefi.iso
all: https://archive.org/details/Puppy_Linux_Tahrpup

I have created 6 half-Chinese language pets for tahr 6.0.6k4130, tahrlite 6.1.1 and 6.1.1.201802:
fcitx Chinese input platform half-Chinese pet:
fcitx_4.2.7-en-zh-raring-13.0.2.pet (25 mb)

scim Chinese input platform half-Chinese pet:
scim_1.4.14-en-zh-raring-13.0.2.pet (23 mb)

yong Chinese input platform half-Chinese pets:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (9.5 mb)

Plus 2 Chinese language pets each for tahr 6.0.6k4130, tahrlite 6.1.1 and 6.1.1.201802:
Simplified Chinese language pet:
tahr-6.0.6k4130-zhcn-13.0.2.pet (3.0 mb)
tahrlite-6.1.1-zhcn-13.0.2.pet (1.8 mb)
tahrlite-6.1.1.201802-zhcn-13.0.2.pet (3.3 mb)

Traditional Chinese language pet:
tahr-6.0.6k4130-zhhk-13.0.2.pet (2.6 mb)
tahrlite-6.1.1-zhhk-13.0.2.pet (1.2 mb)
tahrlite-6.1.1.201802-zhhk-13.0.2.pet (2.8 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in tahr 6.0.6k4130, tahrlite 6.1.1 and 6.1.1.201802
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for tahr 6.0.6k4130, tahrlite 6.1.1 and 6.1.1.201802

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#456 Post by icake »

csipesz released precise 5.7.1 retro minimal and bone 2017 July edition on July 18, 2017 (only 127.5 mb), hereinafter called precise 5.7.1.201707 system

Main features:
based on Shinobar's JapanPup ( http://shinobar.server-on.net/puppy/precise/JP/ )
English/Hungarian only
openbox/lxpanel
Bleachbit system-cleaner
Pburn
Xhippo music player
Gnome Mplayer
mtpaint
galculator
leafpad
geany
pupradio
epdfview
gpicview
pwidgets
takeashot
xvkbd
2 mini games
transmission torrent-app
web browser Firefox 21
not GoogleDrive compatible

More information:
http://www.murga-linux.com/puppy/viewtopic.php?t=110517

Download precise-5.7.1JPRetroBoneEngHunShinobarCsipesz2017July.iso (127.5 mb) :
https://drive.google.com/file/d/0B38lNu ... sp=sharing
or
https://mega.nz/#!cMVEmIiQ!3iKoCL0DuDBk ... w2NWFvj3QU

I have created 6 half-Chinese language pets for precise 5.7.1.201707:
fcitx Chinese input platform:
fcitx_4.2.0-en-zh-precise-12.0.0.pet (18.7 mb)

scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.0.0.pet (21.6 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.0.0.pet (9.5 mb)

Plus 2 Chinese language pets for precise 5.7.1.201707:
Simplified Chinese:
precise-5.7.1.201707-zhcn-12.0.0.pet (3.2 mb)

Traditional Chinese:
precise-5.7.1.201707-zhhk-12.0.0.pet (2.7 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in precise 5.7.1.201707

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for precise 5.7.1.201707

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#457 Post by icake »

csipesz has released 2 vivid based Puppy systems in late 2017-early 2018. The latest one is VividBeta2CDFinalEngHun2018MarchCsipesz.iso (698.7 mb) on Mar 18, 2018

Main features:
available in English and Hungarian
Wine
Palemoon
VLC
Bleachbit
xvidcap
takeashot
transmission
mtpaint

More information and forum discussions:
http://www.murga-linux.com/puppy/viewtopic.php?t=111580

Download VividBeta2CDFinalEngHun2018MarchCsipesz.iso (698.7 mb):
https://mega.nz/#!4V8SkBQS!JDhJLs4m6I-G ... 0aT4arlWTc or
https://drive.google.com/file/d/1rbHSfB ... sp=sharing or
http://archive.org/details/Puppy_Linux_Vividpup

I have created 6 half-Chinese language pets for vivid_beta_2_2018_March:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.0.2.pet (23.9 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.0.2.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (9.5 mb)

Plus 2 Chinese language pets each for vivid_beta_2_2018_March:
Simplified Chinese:
vivid-b2.2018.03-zhcn-13.0.2.pet (5.4 mb)

Traditional Chinese:
vivid-b2.2018.03-zhhk-13.0.2.pet (4.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets enable you to display and input Chinese in vivid_beta_2_2018_March

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for vivid_beta_2_2018_March

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#458 Post by icake »

csipesz has released 2 unicorn based Puppy systems in Jun 2017 and early 2018. The latest one is Unicorn6NoPaeRev3HunEngCsipesz2018Feb.iso (698 mb) in Feb 27, 2018

More information and forum discussions:
http://www.murga-linux.com/puppy/viewto ... de3b17a34b

Download Unicorn6NoPaeRev3HunEngCsipesz2018Feb.iso (698 mb):
https://drive.google.com/file/d/1BeQOZH ... sp=sharing or
https://mega.nz/#!IRsi0Q4Z!cSI7DLTodzmR ... 31fpBUwybs or
https://archive.org/details/Puppy_Linux_Quirky_Unicorn

I have created 6 half-Chinese language pets for unicorn_6.0.2018.02:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.0.2.pet (23.9 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.0.2.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (9.5 mb)

Plus 2 Chinese language pets each for unicorn_6.0.2018.02:
Simplified Chinese:
unicorn-6.0.2018.02-zhcn-13.0.2.pet (5.4 mb)

Traditional Chinese:
unicorn-6.0.2018.02-zhhk-13.0.2.pet (4.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets enable you to display and input Chinese in unicorn-6.0.2018.02

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for unicorn-6.0.2018.02

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese language pets

#459 Post by icake »

ninotix has released an arcade Puppy system based on Tahr 6.0.6 on Mar 2, 2018

More information and forum discussions:
http://murga-linux.com/puppy/viewtopic. ... 503#984503

Download tahr606_arcade.iso (448 mb):
https://archive.org/download/Puppy_Linu ... arcade.iso

I have created 6 half-Chinese language pets for tahr 606 arcade:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.0.2.pet (23.9 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.0.2.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.0.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.0.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.0.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.0.2.pet (9.5 mb)

Plus 2 Chinese language pets each for tahr 606 arcade:
Simplified Chinese:
tahr-6.0.6.arcade-zhcn-13.0.2.pet (3.0 mb)

Traditional Chinese:
tahr-6.0.6.arcade-zhhk-13.0.2.pet (2.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets enable you to display and input Chinese in tahr 606 arcade

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for tahr 606 arcade

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese language pets

#460 Post by icake »

Further to the release of easy os 0.7 (EasyOS Ptyro64 0.7) on Jan 17, 2018 by barry k, versions 0.8; 0.8.1; 0.9; 0.9.1 and 0.9.2 were subsequently released.

more information and annoucement notes:
http://www.murga-linux.com/puppy/viewtopic.php?t=109958

download addresses:
0.8: http://distro.ibiblio.org/easyos/amd64/ ... /pyro/0.8/
0.8.1: http://distro.ibiblio.org/easyos/amd64/ ... yro/0.8.1/
0.9:http://distro.ibiblio.org/easyos/amd64/ ... /pyro/0.9/
0.9.1: http://distro.ibiblio.org/easyos/amd64/ ... yro/0.9.1/
0.9.2: http://distro.ibiblio.org/easyos/amd64/ ... ver/0.9.2/

I have created 6 half-Chinese language pets for easy os 0.8;0.8.1; 0.9; 0.9.1 and 0.9.2:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-xenial-16.1.3.pet (21.6 mb)

scim Chinese input platform:
scim64_1.4.9-en-zh-xenial-16.1.3.pet (18.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-16.1.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-16.1.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-16.1.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-16.1.3.pet (9.5 mb)

Plus 2 Chinese language pets each for easy os 0.8;0.8.1; 0.9 and 0.9.1:
Simplified Chinese:
0.8: easyos-0.8-zhcn-16.1.3.pet (3.0 mb)
0.8.1: easyos-0.8.1-zhcn-16.1.3.pet (3.0 mb)
0.9: easyos-0.9-zhcn-16.1.3.pet (3.0 mb)
0.9.1: easyos-0.9.1-zhcn-16.1.3.pet (3.0 mb)
0.9.2: easyos-0.9.2-zhcn-16.1.3.pet (3.0 mb)

Traditional Chinese:
0.8: easyos-0.8-zhhk-16.1.3.pet (2.5 mb)
0.8.1: easyos-0.8.1-zhhk-16.1.3.pet (2.5 mb)
0.9.1: easyos-0.9-zhhk-16.1.3.pet (2.5 mb)
0.9.1: easyos-0.9.1-zhhk-16.1.3.pet (2.5 mb)
0.9.2: easyos-0.9.2-zhhk-16.1.3.pet (2.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in easy os 0.8;0.8.1; 0.9; 0.9.1 and 0.9.2:

(b) the 2 name corresponding Chinese language pets will give you Simplified Chinese (zhcn) or Traditional Chinese (zhhk) menus, icon labels, tooltips for easy os 0.8;0.8.1; 0.9; 0.9.1 and 0.9.2

more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
more information about the scim64 1.4.9 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese language pets

#461 Post by icake »

Further to the release of x-slacko 4.4 slim systems (r1 to r9), mistfire has released r10 to r12 shortly after.

More information:
x-slacko 4.4 slim: http://murga-linux.com/puppy/viewtopic.php?t=107313

Download iso:
x-slacko 4.4 slim r10 to r12: https://archive.org/details/Puppy_Linux_xslacko-slim

I have created 6 half-Chinese language pets for x-slacko 4.4 slim r10 to r12:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-precise-12.2.1.pet (24.6 mb)

scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.2.1.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.2.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.1.pet (9.5 mb)

Plus 2 Chinese language pets each for x-slacko 4.4 and x-slacko 4.4 slim r10 to r12:
Simplified Chinese:
xslacko-4.4slimr10-zhcn-12.2.1.pet (2.0 mb)
xslacko-4.4slimr11-zhcn-12.2.1.pet (2.0 mb)
xslacko-4.4slimr12-zhcn-12.2.1.pet (2.0 mb)

Traditional Chinese:
xslacko-4.4slimr10-zhhk-12.2.1.pet (1.9 mb)
xslacko-4.4slimr11-zhhk-12.2.1.pet (1.9 mb)
xslacko-4.4slimr12-zhhk-12.2.1.pet (1.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in x-slacko slim r10 to r12
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for x-slacko 4.4 slim r10 to r12

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#462 Post by icake »

Further to the released of LxPupSc 18.02T-k64 on Feb 2, 2018 by peebee, LxPupSc 18.03T-k64; 18.04T-k64; 18.05T-k64 and 18.06M-k64 were subsequently released

Main features (based on the latest 18.06M-k64 version):
- kernel 4.16.13 64-bit built with GCC-7.3.0
(alternative 32-bit kernels 3.16.x 4.4.x & 4.9.x also available - all need firmware in the fdrv)
- Made from Slackware-Current as of Fri Jun 1 21:28:10 UTC 2018
- BUILD_FROM_WOOF='master;b434351e;2018-05-24 23:29:04 +0800'
- web browser in adrv is light-48.0
- ffmpeg is upgraded to 4.0
- firmware is in fdrv
- alternative fall-back xorg is in ydrv

Chromium, Firefox, Palemoon and Seamonkey are in the repository and installable via Internet -> Get Web Browser

More information:
http://murga-linux.com/puppy/viewtopic. ... 181#994181

Download for LxPupSc 18.03T-k64, 18.04T-k64; 18.05T-k64 and 18.06M-k64:
http://archive.org/download/Puppy_Linux_Lxpup

I have created 6 half-Chinese language pets for LxPupSc 18.04T-k64; 18.05T-k64 and 18.06M-k64:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.1.pet (24.6 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.1.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.1.pet (9.5 mb)

Plus 2 Chinese language pets each for LxPupSc 18.04T-k64; 18.05T-k64 and 18.06M-k64:
Simplified Chinese:
lxpupsc-18.04T.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-18.05T.k64-zhcn-17.0.1.pet (3.6 mb)
lxpupsc-18.06M.k64-zhcn-17.0.1.pet (3.6 mb)

Traditional Chinese:
lxpupsc-18.04T.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-18.05T.k64-zhhk-17.0.1.pet (3.5 mb)
lxpupsc-18.06M.k64-zhhk-17.0.1.pet (3.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc 18.04T-k64; 18.05T-k64 and 18.06M-k64
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc 18.04T-k64; 18.05T-k64 and 18.06M-k64

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#463 Post by icake »

peebee has released 2 Puppy derivatives (zestypup and artfulpup) on Oct 6, 2017 based on 666philb's configuration files for xenialpup.
zestypup was created using Woof-CE 32-bit pae Ubuntu Zesty Zapus (17.04) components;
artfulpup was created using Woof-CE 32-bit pae Ubuntu Artful Aardvark (17.10) components.

Smithy then modified artfulpup to handle musical apps and released music2go-artful on Mar 31, 2018. This was then refined to include more musical apps on May 19 (music2go-final) and May 31 (music2go-final20180531).

Itsmersh further modified Smithy's music2go to include more musical apps and released studio2go on Jun 2, 2018

Main features:
zestypup:
Kernel is 4.9.50 (LxPup build) and requires a separate fdrv to provide firmware.
web browser is light-48.0 in a separate adrv
can also use these other more heavyweight browsers:
chromium_61.0.3163.100+pepper_27.0.0.130_lx.sfs
firefox-56.0-lxsc.sfs

ZestyPup is a more "traditional" Puppy build than xenialpup in other ways....
Deadbeef, VLC, Qt5 and GTK3+ are no longer there... instead
PMusic, gnome-mplayer are provided
other changes are PTheme and TAS.
PPM (Puppy Package Manager) is set to use the xenialpup repository (there is no ZestyPup repository)
as well as the Ubuntu Zesty repositories.

artfulpup:
Kernel is 4.9.56 (LxPup build) and requires a separate fdrv to provide firmware.
web browser is light-48.0 in a separate adrv
can also use these more heavyweight browsers:
chromium_61.0.3163.100+pepper_27.0.0.159_lx.sfs
firefox-56.0.1-lxsc.sfs

More information:
zestypup and artfulpup: http://murga-linux.com/puppy/viewtopic.php?t=111735
music2go: http://www.murga-linux.com/puppy/viewtopic.php?t=113061
studio2go: http://www.murga-linux.com/puppy/viewtopic.php?t=113533

Download iso:
zestypup: https://archive.org/details/Puppy_Linux_Zestypup

artfulpup: https://archive.org/details/Puppy_Linux_Artfulpup

music2go: http://smokey01.com/Smithy/Artful%20ard ... artful.iso or
http://archive.org/details/Puppy_Linux_Artfulpup

studio2go: http://smokey01.com/RSH/Studio2Go/Studi ... -06-02.iso or
http://archive.org/details/Puppy_Linux_music2go

I have created 6 half-Chinese language pets for zestypup 17.10.16, artfulpup 17.11, music2go and studio2go:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-xenial-17.0.0.pet (24.6 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-xenial-17.0.0.pet (22.1 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-xenial-17.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-xenial-17.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-xenial-17.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-xenial-17.0.0.pet (9.5 mb)

Plus 2 Chinese language pets each for zestypup 17.10.16, artfulpup 17.11, music2go and studio2go:
Simplified Chinese:
zesty-17.10.16-zhcn-17.0.0.pet (3.2 mb)
artful-17.11-zhcn-17.0.0.pet (3.2 mb)
artfulmusic2go-17.11-zhcn-17.0.0 (3.2 mb)
artfulmusic2go-17.11.final-zhcn-17.0.0 (3.2 mb)
artfulmusic2go-17.11.final20180531-zhcn-17.0.0 (3.2 mb)
studio2go-1.0.r20180602-zhcn-17.0.0 (3.2 mb)

Traditional Chinese:
zesty-17.10.16-zhhk-17.0.0.pet (2.7 mb)
artful-17.11-zhhk-17.0.0.pet (2.7 mb)
artfulmusic2go-17.11-zhhk-17.0.0 (2.7 mb)
artfulmusic2go-17.11.final-zhhk-17.0.0 (2.7 mb)
artfulmusic2go-17.11.final20180531-zhhk-17.0.0 (2.7 mb)
studio2go-1.0.r20180602-zhhk-17.0.0 (2.7 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in zestypup 17.10.16, artfulpup 17.11, music2go and studio2go
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for zestypup 17.10.16, artfulpup 17.11, music2go and studio2go

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#464 Post by icake »

peebee released LxPupSc64 18.03 on Mar 4, 2018; 18.04 on Apr 2, 2018 and 18.06 on Jun 11, 2018

Main features:
New Woof-CE build based on Slackware64 Current

More information:
http://murga-linux.com/puppy/viewtopic. ... &start=225

Download iso:
http://archive.org/download/Puppy_Linux_Lxpup

I have created 6 half-Chinese language pets each for LxPupSc64 18.03; 18.04 and 18.06:
fcitx Chinese input platform:
fcitx64_4.2.7-en-zh-raring-13.1.5.pet (23 mb) (for LxPupSc64 18.03)
fcitx64_4.2.7-en-zh-raring-13.1.6.pet (23 mb) (for LxPupSc64 18.04)
fcitx64_4.2.7-en-zh-raring-13.1.7.pet (23 mb) (for LxPupSc64 18.06)

scim Chinese input platform:
scim64_1.4.14-en-zh-raring-13.1.5.pet (19 mb) (for LxPupSc64 18.03)
scim64_1.4.14-en-zh-raring-13.1.6.pet (19 mb) (for LxPupSc64 18.04)
scim64_1.4.14-en-zh-raring-13.1.7.pet (19 mb) (for LxPupSc64 18.06)

yong Chinese input platform:
for LxPupSc64 18.03:
yong3264_4.2.0-en-zh-raring-13.1.5.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.5.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.5.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.5.pet (9.5 mb)

for LxPupSc64 18.04:
yong3264_4.2.0-en-zh-raring-13.1.6.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.6.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.6.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.6.pet (9.5 mb)

for LxPupSc64 18.06:
yong3264_4.2.0-en-zh-raring-13.1.7.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.7.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.7.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.7.pet (9.5 mb)

Plus 2 Chinese language pets each for LxPupSc64 18.03; 18.04 and 18.06:
Simplified Chinese:
lxpupsc64-18.03.00-zhcn-13.1.5.pet (2.4 mb)
lxpupsc64-18.04.00-zhcn-13.1.6.pet (2.4 mb)
lxpupsc64-18.06.00-zhcn-13.1.7.pet (2.4 mb)

Traditional Chinese:
lxpupsc64-18.03.00-zhhk-13.1.5.pet (1.6 mb)
lxpupsc64-18.04.00-zhhk-13.1.6.pet (1.6 mb)
lxpupsc64-18.06.00-zhhk-13.1.7.pet (1.6 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in LxPupSc64 18.03 (please use 13.1.5); 18.04 (please use 13.1.6) and 18.06 (please use 13.1.7)
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for LxPupSc64 18.03; 18.04 and 18.06

For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#465 Post by icake »

After releasing JL64-704 in 2017, Dry Falls has released a number of updates plus JL64-801; 801B1 and 801B2 were also released in May 2018.

More information:
JL64-704 v10: http://www.murga-linux.com/puppy/viewtopic.php?t=107020
JL64-801; 801B1 and 801B2: http://www.murga-linux.com/puppy/viewtopic.php?t=112102

Download:
JL64-704 v10: https://drive.google.com/open?id=1-_l_W ... jIOvCKbe3K
JL64-801: https://drive.google.com/open?id=1PpLmI ... FO2q3tjwod
JL64-801B2: https://drive.google.com/open?id=1VTHbA ... 6mMfoJ7U36

I have created 6 half-Chinese language pets each for JL64-704v10, JL64-801, 801B1 and 801B2:
fcitx Chinese input platform half-Chinese language pets:
JL64-704 v10: fcitx64_4.2.7-en-zh-raring-13.1.2.pet (22.6 mb)
JL64-801; 801B1 and 801B2: fcitx64_4.2.7-en-zh-raring-13.3.1.pet (22.6 mb)

scim Chinese input platform half-Chinese language pets:
JL64-704 v10: scim64_1.4.14-en-zh-raring-13.1.2.pet (18.6 mb)
JL64-801; 801B1 and 801B2: scim64_1.4.14-en-zh-raring-13.3.1.pet (18.6 mb)

yong Chinese input platform half-Chinese language pets:
JL64-704 v10:
yong3264_4.2.0-en-zh-raring-13.1.2.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.1.2.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.1.2.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.1.2.pet (9.5 mb)

JL64-801, 801B1 and 801B2:
yong3264_4.2.0-en-zh-raring-13.3.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.3.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.3.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.3.1.pet (9.5 mb)

Plus 2 Chinese language pets each for JL64-704v10 and JL64-801, 801B1 and 801B2:
Simplified Chinese:
jlh64-7.0.4v10-zhcn-13.1.2.pet (1.0 mb)
jlh64-8.0.1-zhcn-13.3.1.pet (1.0 mb)
jlh64-8.0.1B1-zhcn-13.3.1.pet (1.0 mb)
jlh64-8.0.1B2-zhcn-13.3.1.pet (1.0 mb)

Traditional Chinese:
jlh64-7.0.4v10-zhhk-13.1.2.pet (1.5 mb)
jlh64-8.0.1-zhhk-13.3.1.pet (1.5 mb)
jlh64-8.0.1B1-zhhk-13.3.1.pet (1.5 mb)
jlh64-8.0.1B2-zhhk-13.3.1.pet (1.5 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in JL64-704 v10 (use version 13.1.2), JL64-801, 801B1 and 801B2 (use version 13.3.1)

(b) the name corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for JL64-704 v10, JL64-801, 801B1 and 801B2.

Known issues:
The default browser duckduckgo can only use SCIM to input Chinese. Both fcitx and yong cannot start in duckduckgo.
The alternate browser midori available in JL64-704 can use any of the fcitx, SCIM and yong Chinese input methods. You can also install chromium64 browser which can run any of the 3 half-Chinese input methods.

For more information and download of chromium64 browser: http://murga-linux.com/puppy/viewtopic.php?t=81351

For more information about the fcitx64 4.2.7 pet, please see postings dated Feb 4 and 12, 2015 on page 15 of this subject
For more information about the scim64 1.4.14 pet, please see postings dated Feb 6 and 13, 2015 on page 15 of this subject
For more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#466 Post by icake »

Further to the released of slacko 5.7.1r5822 on Feb 1, 2018 by Sailor Enceladus, newer versions slacko 5.7.1r6064. r6157, r6184, r6205; r6231 and slacko 5.8CE r6288 has been released.

More information:
http://www.murga-linux.com/puppy/viewto ... 0&start=15

Download iso:
https://www.mediafire.com/folder/kwhxksubf00ny/14.0 or
https://archive.org/details/Puppy_Linux_Slacko

I have created 6 half-Chinese language pets for slacko 5.7.1 r6064, r6157, r6184, r6205, r6231 and slacko 5.8 r6288:
fcitx Chinese input platform half-Chinese pet:
fcitx_4.2.0-en-zh-precise-12.2.0.pet (24.6 mb) (applicable for slacko 5.7.1 r6064 to r6231)
fcitx_4.2.0-en-zh-raring-13.2.3.pet (24.6 mb) (applicable for slacko 5.8CE r6288)

scim Chinese input platform half-Chinese pet:
scim_1.4.9-en-zh-precise-12.2.0.pet (22.1 mb) (applicable for slacko 5.7.1 r6064 to r6231)
scim_1.4.9-en-zh-raring-13.2.3.pet (22.1 mb) (applicable for slacko 5.8CE r6288)

yong Chinese input platform half-Chinese pets:
for slacko 5.7.1 r6064, r6157, r6184, r6205, r6231
yong3264_4.2.0-en-zh-precise-12.2.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.0.pet (9.5 mb)

for slacko 5.8CE r6288
yong3264_4.2.0-en-zh-raring-13.2.3.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.2.3.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.2.3.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.2.3.pet (9.5 mb)

Plus 2 Chinese language pets each for slacko 5.7.1 r6064, r6157, r6184, r6205; r6231 and slacko 5.8CE r6288:
Simplified Chinese language pet:
slacko-5.7.1r6064-zhcn-12.2.0.pet (3.5 mb)
slacko-5.7.1r6157-zhcn-12.2.0.pet (3.5 mb)
slacko-5.7.1r6184-zhcn-12.2.0.pet (3.5 mb)
slacko-5.7.1r6205-zhcn-12.2.0.pet (3.5 mb)
slacko-5.7.1r6231-zhcn-12.2.0.pet (3.5 mb)
slacko-5.8CE.r6288-zhcn-13.2.3.pet (3.5 mb)

Traditional Chinese language pet:
slacko-5.7.1r6064-zhhk-12.2.0.pet (2.8 mb)
slacko-5.7.1r6157-zhhk-12.2.0.pet (2.8 mb)
slacko-5.7.1r6184-zhhk-12.2.0.pet (2.8 mb)
slacko-5.7.1r6205-zhhk-12.2.0.pet (2.8 mb)
slacko-5.7.1r6231-zhhk-12.2.0.pet (2.8 mb)
slacko-5.8CE.r6288-zhhk-13.2.3.pet (2.8 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in slacko 5.7.1 r6064, r6157, r6184, r6205; r6231 and slacko 5.8CE r6288

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 5.7.1 r6064, r6157, r6184, r6205; r6231 and slacko 5.8CE r6288

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject

for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#467 Post by icake »

I have picked 3 more slacko systems to create Chinese language pets: kjartans_slackopup.ios; slacko-570PaeWineEditionRev3EngHunCsipesz2017Sept.iso and slacko-6.3.2-CsipeszVersion-2017May.iso

Download iso:
http://archive.org/download/Puppy_Linux_Slacko

I have created 6 half-Chinese language pets for these 3 slacko systems:
fcitx Chinese input platform half-Chinese pet:
fcitx_4.2.0-en-zh-precise-12.2.1.pet (24.6 mb)

scim Chinese input platform half-Chinese pet:
scim_1.4.9-en-zh-precise-12.2.1.pet (22.1 mb)

yong Chinese input platform half-Chinese pets:
yong3264_4.2.0-en-zh-precise-12.2.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.2.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.2.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.2.1.pet (9.5 mb)

Plus 2 Chinese language pets each for these 3 slacko systems:
Simplified Chinese language pet:
slacko-kjartans-zhcn-12.2.1.pet (2.4 mb)
slacko-5.7.0.2017sep-zhcn-12.2.1.pet (3.6 mb)
slacko-6.3.2.csipv2-zhcn-12.2.1.pet (2.2 mb)

Traditional Chinese language pet:
slacko-kjartans-zhhk-12.2.1.pet (1.9 mb)
slacko-5.7.0.2017sep-zhhk-12.2.1.pet (2.8 mb)
slacko-6.3.2.csipv2-zhcn-12.2.1.pet (1.7 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in these 3 slacko systems

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for these 3 slacko systems

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject

for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#468 Post by icake »

I was searching for small Puppy systems for old computers and found 3 on the slacko series:
slacko-5.3.3-highmem-PAE-SCSI
slacko-5.3.3YAT-v1_EngHun-01micko-csipesz-2015-nov
slacko-5.3.3YAT-v2_HunEng-01micko-csipesz-2016Marc

Download iso:
https://archive.org/details/Puppy_Linux_Slacko

I have created 6 half-Chinese language pets for these 3 small systems:
fcitx Chinese input platform:
fcitx_4.2.0-en-zh-precise-12.0.0.pet (18.7 mb)

scim Chinese input platform:
scim_1.4.9-en-zh-precise-12.0.0.pet (21.6 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-precise-12.0.0.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-precise-12.0.0.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-precise-12.0.0.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-precise-12.0.0.pet (9.5 mb)

Plus 2 Chinese language pets each for these 3 small systems:
Simplified Chinese:
slacko-5.3.3.highmempae-zhcn-12.0.0.pet (3.6 mb)
slacko-5.3.3.yatv12015nov-zhcn-12.0.0.pet (3.6 mb)
slacko-5.3.3.yatv22016mar-zhcn-12.0.0.pet (3.6 mb)

Traditional Chinese:
slacko-5.3.3.highmempae-zhhk-12.0.0.pet (2.9 mb)
slacko-5.3.3.yatv12015nov-zhhk-12.0.0.pet (2.9 mb)
slacko-5.3.3.yatv22016mar-zhhk-12.0.0.pet (2.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in any one of the 3 Puppy systems

(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for the 3 Puppy systems

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#469 Post by icake »

peebee released an experiment puppy slacko 16.11 on Nov 17, 2016

More information:
http://www.murga-linux.com/puppy/viewto ... f974c90a92

Download iso:
https://sourceforge.net/projects/lxpup/ ... hinSlacko/

I have created 6 half-Chinese language pets each for slacko 16.11:
fcitx Chinese input platform half-Chinese pet:
fcitx_4.2.7-en-zh-raring-13.2.12.pet (25 mb)

scim Chinese input platform half-Chinese pet:
scim_1.4.14-en-zh-raring-13.2.1.pet (23 mb)

yong Chinese input platform half-Chinese pets:
yong3264_4.2.0-en-zh-raring-13.2.1.pet (8.6 mb)
yong3264_th_2016.11.5-en-zh-raring-13.2.1.pet (7.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.2.1.pet (8.4 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.2.1.pet (9.5 mb)

Plus 2 Chinese language pets for slacko 16.11:
Simplified Chinese language pet:
slackot-16.11-zhcn-13.2.1.pet (1.9 mb)

Traditional Chinese language pet:
slackot-16.11-zhhk-13.2.1.pet (2.0 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets will enable you to display and input Chinese in slacko 16.11
(b) the version corresponding Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for slacko 16.11

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

icake
Posts: 556
Joined: Fri 27 Jul 2012, 00:58

Chinese Language Pets

#470 Post by icake »

Moat has released Chloe X-Tahr on Apr 13, 2017

More information and forum discussions:
http://www.murga-linux.com/puppy/viewto ... 538a54fb07

Download Chloe_X-Tahr_2.0r9 iso (449 mb):
https://www.dropbox.com/s/lfb78xruq2l65 ... 9.iso?dl=0 or
http://archive.org/details/Puppy_Linux_Chloe

I have created 6 half-Chinese language pets for Chloe_X-Tahr_2.0r9:
fcitx Chinese input platform:
fcitx_4.2.7-en-zh-raring-13.s.1.pet (25 mb)

scim Chinese input platform:
scim_1.4.14-en-zh-raring-13.s.1.pet (22.6 mb)

yong Chinese input platform:
yong3264_4.2.0-en-zh-raring-13.s.1.pet (9.7 mb)
yong3264_th_2016.11.5-en-zh-raring-13.s.1.pet (8.9 mb)
yong3264_thjj_2016.7.29-en-zh-raring-13.s.1.pet (9.5 mb)
yong3264_thth_2014.8.5-en-zh-raring-13.s.1.pet (10.6 mb)

Plus 2 Chinese language pets for Chloe_X-Tahr_2.0r9:
Simplified Chinese:
chloextahr-2.0r9-zhcn-13.s.1.pet (2.0 mb)

Traditional Chinese:
chloextahr-2.0r9-zhhk-13.s.1.pet (1.9 mb)

To use:
(a) any 1 of the 6 half-Chinese language pets enable you to display and input Chinese in Chloe_X-Tahr_2.0r9

(b) the Chinese language pets will give you Simplified Chinese or Traditional Chinese menus, icon labels, tooltips for Chloe_X-Tahr_2.0r9

for more information about the fcitx and scim pets, please see posting dated Feb 19, 2015 on page 15 of this subject
for more information about the yong pets, please see posting dated Dec 31, 2016 on page 25 of this subject

All these half-Chinese and Chinese language pets are now available for download from the public sharing folders. Please see the first posting for download addresses.

Post Reply