Page 1 of 1
precise 543 with ACER aspire 7715Z
Posted: Mon 28 Jan 2013, 14:08
by gilloraymondo
Hi,
I like precise 543 and I installed it on an USB (full install).
It works perfectly well on an asus Netbook, but I have a serious problem with an ACER aspire 7715Z computer :
When I start, I can see the nice precise window, then I see several grub 's lines.
The last one I see is "loading kernel modules" and then, I have a black screen.
Any idea to solve the problem ?
Friendly yours
Posted: Mon 28 Jan 2013, 15:59
by Galbi
Maybe it´s a video related issue, so when you see the blank screen try hiting Ctrl+Alt+BackSpace to kill the video server. If you see the prompt, type xorgwizard and try with the VESA driver.
Hope it helps.
Posted: Mon 28 Jan 2013, 17:23
by gilloraymondo
Hi Galbi
Thank you for your help.
I have tried that, but it does nothing : the screen is still black.
I have tried too with a fresh live usb : it's exactly the same thing.
I don't know how to do.
Friendly yours
Posted: Mon 28 Jan 2013, 17:51
by gilloraymondo
Hi
I does exactly the same thing with a live CD
Friendly yours
Posted: Mon 11 Feb 2013, 00:32
by gilloraymondo
Hi,
If, with my Acer aspire computer 7715z, I use another screen liked with a cable, everething works perfectly well.
On the ubuntu forum, I have seen that everybody has the same problem with this computer and this kernel.
It could be because of the Nvidia graphic driver. But I don't know how to install another one and remove the Nvidia driver....
Can you help me ?
Thank you
Posted: Mon 11 Feb 2013, 00:47
by Hogweed
Try the retro build of Precise 5.4.3 - See announcement at
http://bkhome.org/blog2/?viewDetailed=00070
It has an alternative nvidia driver detailed in the readme notes
http://distro.ibiblio.org/quirky/precis ... README.htm
Posted: Mon 11 Feb 2013, 08:16
by tempestuous
gilloraymondo wrote:It could be because of the Nvidia graphic driver.
Nvidia?? Google tells me your Aspire 7715Z has the
Intel GM45 graphics chipset?
A potential solution is here -
http://www.linuxquestions.org/questions ... ost4481170
Translating that information into Puppy-compatible terms: at the boot prompt, type -
gilloraymondo wrote:I like precise 543 and I installed it on an USB (full install).
Full install? Really?
Conventional wisdom is that you should be doing a
frugal installation on flash drives.
Posted: Thu 14 Feb 2013, 14:22
by gilloraymondo
Hi,
Thank you for your help, but I have still the same problem
Same problem with the retro version
Same problem with the "osi" solution.
The only thing which works is to link my computer with a cable to another screen !!!!!!
But It cannot be said it's a solution.......
Of course, I have no problem with olders kernels...., Lucid puppy for instance.
I should like to understand why I have a problem with this new kernel.....
Any other idea ?
Thank you
Posted: Fri 15 Feb 2013, 04:52
by tempestuous
gilloraymondo wrote:I should like to understand why I have a problem with this new kernel
That's explained in the link I provided - I was kinda hoping you would read the whole thing, not just my instruction about adding the "puppy acpi_osi=Linux" boot parameter.
gilloraymondo wrote:I have still the same problem
... with the "osi" solution.
Did you also press the Fn + left-arrow to switch the backlight on?
Again, that's explained in the link.
Posted: Fri 15 Feb 2013, 14:58
by gilloraymondo
Hi tempestuous,
Thank you for your help.
acpi_osi=linux
I have :
could not find kernel image : acpi_osi=linux
Explanation ? May be it's because english is not my mother tongue..... but I not found really an explanation, or, may be, we can say the beginning of an explanation....which explains nothing
Finaly, I stay with my problem...
Thank you
Posted: Fri 15 Feb 2013, 14:58
by gilloraymondo
Posted: Sat 16 Feb 2013, 02:03
by tempestuous
gilloraymondo wrote:acpi_osi=linux
I have :
could not find kernel image : acpi_osi=linux
You made 2 errors:
i) this boot parameter needs to be prefixed with "puppy ". Thus -
ii) Linux commands are case-sensitive, and you just quoted lowercase "l" for "linux" instead of uppercase "L" - "Linux".
"puppy" specifies the kernel image, as labelled by the Puppy Linux authors.
"acpi_osi=Linux" is an argument to be passed to the kernel during boot up.
Of course, don't forget to press the Fn + left-arrow keys, once booted.