Precise Puppy 5.5 Release Candidate
Precise Puppy version 5.4.92 (5.5beta)
Exactly the same setup as above (5.4.93) and the same Laptop.
All seems very good and all basics working OOTB.
5.4.93 feels very slightly nippier, but not really much in it.
Running temperature and CPU activity seem about the same.
Both outstanding on a 10yr old Laptop. Again - many thanks.
Exactly the same setup as above (5.4.93) and the same Laptop.
All seems very good and all basics working OOTB.
5.4.93 feels very slightly nippier, but not really much in it.
Running temperature and CPU activity seem about the same.
Both outstanding on a 10yr old Laptop. Again - many thanks.
- Attachments
-
- hardinfo_report.html.gz
- (44.15 KiB) Downloaded 239 times
[b]Asus[/b] 701SD. 2gig ram. 8gb SSD. [b]IBM A21m[/b] laptop. 192mb ram. PIII Coppermine proc. [b]X60[/b] T2400 1.8Ghz proc. 2gig ram. 80gb hdd. [b]T41[/b] Pentium M 1400Mhz. 512mb ram.
Precise Puppy 5.5beta
I did a remaster of 5.4.93 adding quite a few applications from
pets,debs,and ppm,the iso grew to 500+ mb but the dvd works well on several
computers.
VIDEO REPORT: Precise Puppy, version 5.4.93
Chip description:
VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan
[Mobility Radeon HD 5400 Series]
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1600x900
Depth (bits, or planes): 24
Modules requested to be loaded: synaptics dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): ati
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse radeon ramdac
record synaptics
Actual rendering on monitor:
Resolution: 1600x900 pixels (423x238 millimeters)
Depth: 24 planes
pets,debs,and ppm,the iso grew to 500+ mb but the dvd works well on several
computers.
VIDEO REPORT: Precise Puppy, version 5.4.93
Chip description:
VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Manhattan
[Mobility Radeon HD 5400 Series]
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1600x900
Depth (bits, or planes): 24
Modules requested to be loaded: synaptics dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): ati
Loaded modules: dbe dri dri2 exa extmod fb glx kbd mouse radeon ramdac
record synaptics
Actual rendering on monitor:
Resolution: 1600x900 pixels (423x238 millimeters)
Depth: 24 planes
- Attachments
-
- screenshot.jpg
- (62.85 KiB) Downloaded 720 times
Precise Puppy 5.4.92
- faster to boot than 5.4.90
- I think acpi_cpufreq is not needed (where does it work?)
- /tmp/dhcpcd.log "Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory"
- /var/log/Xorg.0.log
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(EE) Failed to load module "fglrx" (module does not exist, 0)
- some files groups are still wrong
- /etc/apm obsolete
- /etc/dbus-1/system.d/ missing
- /etc/gconf/ obsolete
- SMB Browser broken :
open /root/network/ in ROX click "Network", shows "scanning network, please wait", then "finished!" then nothing...
From command line, AppRun, displays "it dosen't seem like you are..." "bash: /root/options: No such file or directory"
- gnome player "open location" missing icon
- Bright color in console doing ls -la /dev/ram comes from "/etc/profile" line 188 alias ls='ls --color=auto'
- faster to boot than 5.4.90
- I think acpi_cpufreq is not needed (where does it work?)
- /tmp/dhcpcd.log "Failed to connect to wpa_supplicant - wpa_ctrl_open: No such file or directory"
- /var/log/Xorg.0.log
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(EE) Failed to load module "fglrx" (module does not exist, 0)
- some files groups are still wrong
- /etc/apm obsolete
- /etc/dbus-1/system.d/ missing
- /etc/gconf/ obsolete
- SMB Browser broken :
open /root/network/ in ROX click "Network", shows "scanning network, please wait", then "finished!" then nothing...
From command line, AppRun, displays "it dosen't seem like you are..." "bash: /root/options: No such file or directory"
- gnome player "open location" missing icon
- Bright color in console doing ls -la /dev/ram comes from "/etc/profile" line 188 alias ls='ls --color=auto'
Menu>Setup>QuickSetup First Run Settings
Sometimes a picture is worth a thousand words.
QuickSetup - User assist for initial system starts
Can someone explain why when the wireless laptop does not have a LAN cable plugged in when the PC is booted pfix=ram for beta test, I do not get a Network section; versus when a LAN wire is plugged in, I do?
The Network section is equally important for use of the laptop in both cases of wire out or wire in.
Is this a bug? If so which is the bug...showing it or not showing it?
QuickSetup - User assist for initial system starts
Can someone explain why when the wireless laptop does not have a LAN cable plugged in when the PC is booted pfix=ram for beta test, I do not get a Network section; versus when a LAN wire is plugged in, I do?
The Network section is equally important for use of the laptop in both cases of wire out or wire in.
Is this a bug? If so which is the bug...showing it or not showing it?
- Attachments
-
- capture11550.png
- Network section does not display even though its needed
- (60.98 KiB) Downloaded 642 times
-
- capture3830.png
- Displays if a cable is plugged into the Laptop
- (72.16 KiB) Downloaded 653 times
FIND command, command use, or terminal problem
I was searching for the existence of a file using the find command.
This worksAs does this, too
BUT THIS results in errors shown
Is this
Note: This may or may not be important in light of filesystem changes that are being introduced in Precise: BUT, /mnt/sda1 is a FAT16 drive on the HDD.
Here to help
This works
Code: Select all
# cd ~
# find / -name grl*
Code: Select all
# find /mnt/sda1 -name grl*
Code: Select all
# pwd
/root
# whoami
root
# cd /mnt/sda1
# find . -name grl*
find: paths must precede expression: grldr1.old
Usage: find [-H] [-L] [-P] [-Olevel] [-D help|tree|search|stat|rates|opt|exec] [path...] [expression]
# find / -name grl*
find: paths must precede expression: grldr1.old
Usage: find [-H] [-L] [-P] [-Olevel] [-D help|tree|search|stat|rates|opt|exec] [path...] [expression]
- a terminal problem?
- a find command problem?
- incorrect use of find command?
Note: This may or may not be important in light of filesystem changes that are being introduced in Precise: BUT, /mnt/sda1 is a FAT16 drive on the HDD.
Here to help
Re: compressed NTFS
Thanks @Rcrsn51
I decided to change the GRUB4DOS config for Precise fromThis only changed the aborting message slightly as follows:
The folder that contains the Precise on the compressed drive is "/LinuxBoots/Barry". On the non-compressed NTFS where it boots, the pathname is identical. The folder contents are identical in each.
This appears as if there may be something in the distro that causes this. I suggest this because all the other distros boot fine from the compressed partition except this Precise 5492 and 5493.
The disk layout is
But, my laptop has a single HDD with GRUB4DOS in the MBR and grldr on the first drive (a factory FAT16). I am not having this problem with other distros on the same compressed-NTFS partition. Just with Precise.rcrsn51 wrote:I cannot duplicate this problem. I made a compressed NTFS drive and booted 5493 using Grub4Dos. Everything worked correctly, including saving to /mnt/home.gcmartin wrote:I have found a problem with use of compressed-NTFS and both versions of 5.5beta.
I decided to change the GRUB4DOS config for Precise from
Code: Select all
find --set-root ===> root (hd0,4)
Code: Select all
Filesystem type is NTFS, partition type 0x07
[Linux-bzImage, setup=0x3e00, size=0x298250]
[Linux-initrd @ 0x3f5f6000, 0x1ccc76 bytes]
uncompression error
--System halted
This appears as if there may be something in the distro that causes this. I suggest this because all the other distros boot fine from the compressed partition except this Precise 5492 and 5493.
The disk layout is
- Partition 1 - FAT16
Partition 2 - NTFS
Partition 4 - FAT32
Partition 5 - compressed NTFS
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Menu>Setup>QuickSetup First Run Settings
No, it is not a bug, it is a deliberate design decision.gcmartin wrote:Sometimes a picture is worth a thousand words.
QuickSetup - User assist for initial system starts
Can someone explain why when the wireless laptop does not have a LAN cable plugged in when the PC is booted pfix=ram for beta test, I do not get a Network section; versus when a LAN wire is plugged in, I do?
The Network section is equally important for use of the laptop in both cases of wire out or wire in.
Is this a bug? If so which is the bug...showing it or not showing it?
The next window advises to click on the 'network' icon to establish a network connection, and that has the network settings, including setting hostname.
The Internet Connection Wizard is my preferred place for all network configuration.
[url]https://bkhome.org/news/[/url]
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: FIND command, command use, or terminal problem
Do it this way:gcmartin wrote:I was searching for the existence of a file using the find command.
This worksAs does this, tooCode: Select all
# cd ~ # find / -name grl*
BUT THIS results in errors shownCode: Select all
# find /mnt/sda1 -name grl*
Is thisCode: Select all
# pwd /root # whoami root # cd /mnt/sda1 # find . -name grl* find: paths must precede expression: grldr1.old Usage: find [-H] [-L] [-P] [-Olevel] [-D help|tree|search|stat|rates|opt|exec] [path...] [expression] # find / -name grl* find: paths must precede expression: grldr1.old Usage: find [-H] [-L] [-P] [-Olevel] [-D help|tree|search|stat|rates|opt|exec] [path...] [expression]
Or could this be indicative of some other issue(s) in the terminal.
- a terminal problem?
- a find command problem?
- incorrect use of find command?
Note: This may or may not be important in light of filesystem changes that are being introduced in Precise: BUT, /mnt/sda1 is a FAT16 drive on the HDD.
Here to help
# find . -name 'grl*'
Always put glob wildcard in single quotes to prevent evaluation before execution.
[url]https://bkhome.org/news/[/url]
I test recompiled 3.8 kernel. I did add bunch of multimedia - dvb drivers. I unticked first the automatic creation button in make menuconfig ....under multimedia ( I dont remember the exact name of that tickable option )....and then I did tick manually the drivers in multimedia section. I got the missing ivtv with hauppage pvr drivers. The problem Billtoo posted.
Brcmsmac was added just by ticking it, since it was now tickable option...due to bcma.ko inclusion.
I provide here the diff comparision of those drivers I was able to add. I am sure there are some multimedia drivers which are not needed, but anyway....there were alot useful drivers left out.
Poulsbo.ko should be left out. It interferes the /kernel/drivers/gpu/drm/gma500/gma500_gfx.ko usage if and when the modesetting_drv.so ( in /usr/lib/x/drivers-alternate ) version 0.6.0 has been added and the cedarview fix pet by 01micko has been added/installed.
As aarf posted. Modesetting for intel atom with gma graphics does not work atm.
Brcmsmac was added just by ticking it, since it was now tickable option...due to bcma.ko inclusion.
I provide here the diff comparision of those drivers I was able to add. I am sure there are some multimedia drivers which are not needed, but anyway....there were alot useful drivers left out.
Poulsbo.ko should be left out. It interferes the /kernel/drivers/gpu/drm/gma500/gma500_gfx.ko usage if and when the modesetting_drv.so ( in /usr/lib/x/drivers-alternate ) version 0.6.0 has been added and the cedarview fix pet by 01micko has been added/installed.
As aarf posted. Modesetting for intel atom with gma graphics does not work atm.
- Attachments
-
- added-modules-for-3.8-kernel.gz
- (706 Bytes) Downloaded 267 times
Last edited by pemasu on Sat 23 Feb 2013, 11:55, edited 2 times in total.
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Re: Precise 5.4.9.3 (k3.8.0)
Hmmm, yes, it seems that 3.8.0 kernel source no longer has that file.drblock2 wrote:2. The proprietary NVIDIA 173.14.35 and 173.14.36 drivers fail to compile with an error message:
The required file is, in fact, missing.ERROR: The kernel header file
'/lib/modules/3.8.0/build/include/linux/version.h' does not exist. The
most likely reason for this is that the kernel source files in
'/lib/modules/3.8.0/build' have not been configured.
[url]https://bkhome.org/news/[/url]
http://www.lwfinger.com/nvidia_patches/ ... un_for_3.8Nvidia driver 310.19
====================
This driver needs to be patched for kernel 3.8. Download the Nvidia driver and the
patch file, then run the commands:
sh ./NVIDIA-Linux-x86_64-310.19.run --apply-patch patch_nvidia_310_19.run_for_3.8
sudo sh ./NVIDIA-Linux-x86_64-310.60-custom.run
Change the names for 32-bit systems.
http://www.nvidia.com/object/linux-disp ... river.html
- BarryK
- Puppy Master
- Posts: 9392
- Joined: Mon 09 May 2005, 09:23
- Location: Perth, Western Australia
- Contact:
Fixed, see:linuxcbon wrote:Precise 5.4.92
- remasterpup2 doesn't accept "mounted iso" as "virtual CD"
http://bkhome.org/blog2/?viewDetailed=00146
[url]https://bkhome.org/news/[/url]
I wonder if something can be done for Intel driver on 5493 k3.8
The Hardware report shows the device as Intel 82845G/GL
(Brookdale-G/GE) chipset Integrated graphics driver. I've
attached a pdiag in case it's of some value. There was no
personal save file, just the raw main sfs.
The symptom is mostly black screen and toolbar at startup.
I manage to restart x server and it's ok then. 5492 works fine.
Art
The Hardware report shows the device as Intel 82845G/GL
(Brookdale-G/GE) chipset Integrated graphics driver. I've
attached a pdiag in case it's of some value. There was no
personal save file, just the raw main sfs.
The symptom is mostly black screen and toolbar at startup.
I manage to restart x server and it's ok then. 5492 works fine.
Art
- Attachments
-
- pdiag-20130223.tar.gz
- (116.72 KiB) Downloaded 201 times
Re: Precise 5.4.9.3 (k3.8.0)
Here is a solution that works for me with YASSM and Samba-TNG servers:rcrsn51 wrote:This problem is specific to very new kernels and Samba-TNG servers. I don't think that there is any solution.drblock2 wrote:Downloaded and installed Precise 5.4.93 (k3.8.0) ..... Neither pnethood nor YASSM connect to a machine running Puppy (Slacko, Wary), but do connect to a Windows XP share.
You will need to use a full Samba package in Puppy.
Samba-login has an Options box. Enter sec=ntlm
Can someone else please test this?
Running Precise 5.4.93 (k 3.8.0) from an f2fs volume on SDHC
Rather than clog this thread up I have posted this in the project section:
EDIT - Now in cutting edge thread !
http://www.murga-linux.com/puppy/viewto ... 182#687182
EDIT - Now in cutting edge thread !
http://www.murga-linux.com/puppy/viewto ... 182#687182
Last edited by ETP on Sat 23 Feb 2013, 20:08, edited 1 time in total.
Regards ETP
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
[url=http://tinyurl.com/pxzq8o9][img]https://s17.postimg.cc/tl19y14y7/You_Tube_signature80px.png[/img][/url]
[url=http://tinyurl.com/kennels2/]Kennels[/url]
Greetings rcrsn51
I tried your solution for connecting to my samba shares without success.
I don't know if this will help, but my server is running SMS (superb mini server) based on slackware 13.37.
Here's my samba.conf
Let me know if you want me to test anything else.
[/code]
I tried your solution for connecting to my samba shares without success.
I don't know if this will help, but my server is running SMS (superb mini server) based on slackware 13.37.
Here's my samba.conf
Code: Select all
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba HOWTO Collection.
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
log file = /var/log/samba.%m
printer = HP_Deskjet_1050_J410_series
restrict anonymous = no
ldap ssl = No
max protocol = NT1
server string = SMS
path = /var/spool
acl compatibility = winnt
workgroup = WORKGROUP
server signing = Auto
os level = 20
domain master = no
public = yes
security = share
preferred master = no
max log size = 50
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.10.0 127.0.0.0
[Music]
force user = nobody
path = /mnt/sdb1/Music/
read only = yes
[andy]
valid users = andy
writeable = yes
path = /mnt/sdb1/andy/
[Videos]
force user = nobody
path = /mnt/sdb1/Videos
read only = yes
[HPDeskje]
printable = yes
path = /var/spool/cups/
[/code]
@tater: Just to clarify:
1. What version of Precise are you using?
2. Can other Puppies connect to this server?
Here are some variations to try:
1. What version of Precise are you using?
2. Can other Puppies connect to this server?
Here are some variations to try:
Code: Select all
sec=
none attempt to connection as a null user (no name)
krb5 Use Kerberos version 5 authentication
krb5i Use Kerberos authentication and packet signing
ntlm Use NTLM password hashing (default)
ntlmi Use NTLM password hashing with signing (if /proc/fs/cifs/PacketSigningEnabled on or if server requires signing also can be the default)
ntlmv2 Use NTLMv2 password hashing
ntlmv2i Use NTLMv2 password hashing with packet signing
Re: Precise 5.4.9.3 (k3.8.0)
YASSM works OK for me on 5.4.93 both without and with your suggested option.rcrsn51 wrote:Samba-login has an Options box. Enter sec=ntlm
Can someone else please test this?
My server is Slacko 5.4 running Samba 3.6.1 (from memory).
Cheers
peebee
LxPup = Puppy + LXDE
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64
Main version used daily: LxPupSc; Assembler of UPups, ScPup & ScPup64, LxPup, LxPupSc & LxPupSc64