alphaOS [closed]
Re: win32 codec
You mean this all-20110131.tar.bz2 (25MB)ndrancs wrote:perhaps this codec?
http://www.mplayerhq.hu/MPlayer/releases/codecs/
I extracted files to /usr/lib/codecs as suggested in README, but still wma not working
Code: Select all
[root@alphaos test_media]# mplayer testing.wma
MPlayer2 UNKNOWN (C) 2000-2012 MPlayer Team
Playing testing.wma.
Detected file format: asf (libavformat)
[lavf] stream 0: audio (wmav2), -aid 0, -alang eng
Clip info:
WM/ToolName: Cool Edit Pro
WM/ToolVersion: 2.01.3097.0
WMFSDKVersion: 9.00.00.2980
WMFSDKNeeded: 0.0.0.0000
IsVBR: 0
DeviceConformanceTemplate: L2
WM/WMADRCPeakReference: 23197
WM/WMADRCAverageReference: 3216
Load subtitles in .
==========================================================================
Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders
Unsupported sample format
Unsupported sample format
ADecoder init failed :(
Could not open audio decoder ffmpeg.
Opening audio decoder: [dmo] Win32/DMO decoders
AUDIO: 44100 Hz, 1 ch, ??, 48.0 kbit/6.81% (ratio: 6003->88200)
Selected audio codec: [wmadmo] afm: dmo (Windows Media Audio DMO)
==========================================================================
[AO_ALSA] Format ?? is not supported by hardware, trying default.
AO: [alsa] 48000Hz 1ch s16le (2 bytes per sample)
[format] The number of bytes per sample must be 1, 2, 3 or 4. Current value is 8
Couldn't find matching filter/ao format!
Audio: no sound
Video: no video
Exiting... (End of file)
New window manager packages:
pekwm-0.1.16-2.spkg
jwm-724-2.spkg
icewm-1.3.7-3.spkg
fluxbox-1.3.5-2.spkg
fbpanel-6.1-3.spkg
fluxbox and jwm are "fixed" to use sakura as the default terminal, /root/.start as for openbox is still usable for every other window manager, you can comment tint2 (add # before) and install fbpanel if you want panel with a menu.
pekwm-0.1.16-2.spkg
jwm-724-2.spkg
icewm-1.3.7-3.spkg
fluxbox-1.3.5-2.spkg
fbpanel-6.1-3.spkg
fluxbox and jwm are "fixed" to use sakura as the default terminal, /root/.start as for openbox is still usable for every other window manager, you can comment tint2 (add # before) and install fbpanel if you want panel with a menu.
Re: Print
Update: I have removed the HP and Epson drivers from the package. You can now install them with the usual PETs.Arefacti wrote:I want to print with a lexmark S305 wifi, and the lexmark_inkjet_legacy-1.0.1.pet was working perfectly.
AlphaOS has CUPS 1.4.8, but the rest of the printing system is in the downloadable package print_scan_alphaos-4.0.tar.gz from here. Click the smaller Download button on the LEFT.
1. Download the package to a temporary location.
2. Click on the file to extract it.
3. Inside, you will find a folder containing the individual components and a script named install.sh
4. Press F4 to open a terminal.
5. Run: sh install.sh
6. Look in Menu > Applications > System Tools for Manage CUPS Printers and in Menu > Applications > Graphics for Peasyscan.
The system has built-in Gutenprint drivers and a basic set of SANE scanner backends. But you can also install many of the print/scan driver PETs from here. Use the command ppet - the Puppy Package Extraction Tool. For example:
Code: Select all
ppet brother_hl2070n-2.0.pet
If you install this package, please provide feedback.
------------------------------------------
Last edited by rcrsn51 on Sun 19 May 2013, 00:00, edited 4 times in total.
Re: Print
Hello rcrsn51,rcrsn51 wrote:AlphaOS has CUPS 1.4.8, but the rest of the printing system is in the downloadable package print_scan_alphaos-3.0.tar.gz from here. Click the smaller Download button on the LEFT.Arefacti wrote:I want to print with a lexmark S305 wifi, and the lexmark_inkjet_legacy-1.0.1.pet was working perfectly.
1. Download the package to a temporary location.
2. Click on the file to extract it.
3. Inside, you will find a folder containing the individual components and a script named install.sh
4. Press F4 to open a terminal.
5. Run: sh install.sh
6. Look in Menu > Applications > System Tools for Manage CUPS Printers and in Menu > Applications > Graphics for Peasyscan.
The printing system has built-in Gutenprint, HP and Epson drivers and a basic set of SANE scanner backends. But you can also install many of the print/scan driver PETs from here. Use the command ppet - the Puppy Package Extraction Tool. For example:I did a quick test with the Lexmark driver and it looks OK.Code: Select all
ppet brother_hl2070n-2.0.pet
You can also use ppet to install any of the PeasyApps listed here.
thanks for your job.
Try to install the lexmark pet, seems that there is problem :
Code: Select all
ppet lexmark_inkjet_legacy-1.0.1.pet
1+0 records in
1+0 records out
4161504 bytes (4,2 MB) copied, 0,382718 s, 10,9 MB/s
gzip: stdin: unexpected end of file
tar: Fin prématurée rencontrée dans l'archive.
tar: Fin prématurée rencontrée dans l'archive.
tar: Error is not recoverable: exiting now
Done
unfortunately, this one don't work :
Code: Select all
Print Test Page lexmark Error
Unable to print test page:
Unsupported format 'application/vnd.cups-banner'!
Re: Print
I downloaded the lexmark_inkjet_legacy-1.0.1.pet and ppet extracted it cleanly. Maybe you got a bad download. It should be 10 MB but it looks like you only got 4 MB.Arefacti wrote:Try to install the lexmark pet, seems that there is problem
Which alphaOS version are you using? I checked this in version 3 and test pages printed OK.Unsupported format 'application/vnd.cups-banner'!
However, since your driver download is corrupted, it's impossible to know what is going wrong.
[Edit] I checked printing in version 4 and everything looks OK.
Re: Print
rcrsn51 wrote:I downloaded the lexmark_inkjet_legacy-1.0.1.pet and ppet extracted it cleanly. Maybe you got a bad download. It should be 10 MB but it looks like you only got 4 MB.Arefacti wrote:Try to install the lexmark pet, seems that there is problem
Which alphaOS version are you using? I checked this in version 3 and test pages printed OK.Unsupported format 'application/vnd.cups-banner'!
However, since your driver download is corrupted, it's impossible to know what is going wrong.
It works !
(The version is AlphaOS 4.0)
yes the download was effectively corrupted. BUT after a right download and install, the print didn't work yet.
SO, to verify my parameters, I print thanks to the print board the network configuration and so..It works.
Don't know why it unlocked all
but.. voilà,
Thanks again you two rcrsn51 and Simargl
(for me, a distribution without print IS NOT a distribution)
I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
But when I did mksquashfs on alpa_400.sfs it came out 6M bigger
I used xz compression.
Sim, do you use any special options to get better compression?
Still having problems with sakura terminal.
So I have to type the commands I want to run in a script file and then
rightclick and execute in spacefm.
Tried removing .conf/sakura folder - still no prompt
What is happening when I click on sakura the window shows but doesnt receive
keystrokes. Usually there is a prompt by the cursor. Mine shows only cursor that doesnt blink.
Obs! right click menu working in sakura
Can run commands at cli with X_AUTOLOGIN=no
Tried it on my old IBM T41, sakura works here with prompt
is there an alternate terminal for alphaos I can try.
I tried running /bin/bash but got no window.
Any input would be most welcome
But when I did mksquashfs on alpa_400.sfs it came out 6M bigger
I used xz compression.
Sim, do you use any special options to get better compression?
Still having problems with sakura terminal.
So I have to type the commands I want to run in a script file and then
rightclick and execute in spacefm.
Tried removing .conf/sakura folder - still no prompt
What is happening when I click on sakura the window shows but doesnt receive
keystrokes. Usually there is a prompt by the cursor. Mine shows only cursor that doesnt blink.
Obs! right click menu working in sakura
Can run commands at cli with X_AUTOLOGIN=no
Tried it on my old IBM T41, sakura works here with prompt
is there an alternate terminal for alphaos I can try.
I tried running /bin/bash but got no window.
Any input would be most welcome
Last edited by Scooby on Mon 08 Apr 2013, 18:29, edited 3 times in total.
I use this SFS_COMPRESSION="-comp xz -b 524288 -Xbcj x86"Scooby wrote:I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
But when I did mksquashfs on alpa_400.sfs it came out 6M bigger
I used xz compression.
Sim, do you use any special options to get better compression?
That error with sakura is really strange, you can try xterm from attachment bellowScooby wrote:Still having problems with sakura terminal.
So I have to type the commands I want to run in a script file and then
rightclick and execute in spacefm.
Tried removing .conf/sakura folder - still no prompt
What is happening when I click on sakura the window shows but doesnt receive
keystrokes. Usually there is a prompt by the cursor. Mine shows only cursor that doesnt blink.
Obs! right click menu working in sakura
Can run commands at cli with X_AUTOLOGIN=no
Tried it on my old IBM T41, sakura works here with prompt
is there an alternate terminal for alphaos I can try.
I tried running /bin/bash but got no window.
Any input would be most welcome
- Attachments
-
- xterm.tar.gz
- (171.15 KiB) Downloaded 283 times
New icon for spkg packages
https://bitbucket.org/simargl/spkg/comm ... 02cb0d6d55
What do you think?
https://bitbucket.org/simargl/spkg/comm ... 02cb0d6d55
What do you think?
Peasyscan
i did not try because in the past it was IMPOSSIBLE to get my wifi scan works on aaaaall the puppies.
and I launch Peasyscan, and...success !
That's very very unexpected and so much amazing !
incredible.
A question, now, there is a cpu temp° in the system tools, and it works great too !
is it possible to get in in conky or tint2 ?
Many Thanks rcrsn51, simargl and other contributors..
(sorry for my English, I try to do better but..it's very hard).
Scooby, I'm also using the flsynclient from Carolina to configure touchpads in alphaOS 4.0 sucessfully. Adding a synclient -s line to /root/.start will load the settings created on a reboot or X restart.Scooby wrote:I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
So you dont have to hack in xorg.conf at all?Marv wrote:Scooby, I'm also using the flsynclient from Carolina to configure touchpads in alphaOS 4.0 sucessfully. Adding a synclient -s line to /root/.start will load the settings created on a reboot or X restart.Scooby wrote:I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
Some xorg.conf substitution/modification is still required to get the synaptics driver loaded and running. Two straight substitutions that have worked are the one I mentioned on the alphaOS board for the ALPS touchpads and the one from Carolina you used. Once the driver is running, synclient can be run in a terminal to change configuration, xorg.conf can be edited manually, or flsynclient can be installed and used to configure the touchpad from a GUI. If that is done, it creates a configuration file .flsynclient in /root which can be manually edited and loaded at boot using a line synclient -s in /root/.start. As I recall, flsynclient is around 200kb. Whether the convenience is worth the weight is a judgement call.Scooby wrote:So you dont have to hack in xorg.conf at all?Marv wrote:Scooby, I'm also using the flsynclient from Carolina to configure touchpads in alphaOS 4.0 sucessfully. Adding a synclient -s line to /root/.start will load the settings created on a reboot or X restart.Scooby wrote:I wanted to report success on getting touchpad to work with the xorg.conf from Carolina!
Pups currently in kennel :D Older LxPupSc and X-slacko-4.4 for my users; LxPupSc, LxPupSc64 and upupEF for me. All good pups indeed, and all running savefiles for look'n'feel only. Browsers, etc. solely from SFS.
a video conversion software
Hello,
is it possible to have a video conversion software ?
For example VLC ?
Thanks you
NB : can't have the cpu temperature monitor on my conky...never mind
is it possible to have a video conversion software ?
For example VLC ?
Thanks you
NB : can't have the cpu temperature monitor on my conky...never mind