(old)Puppy Linux Discussion Forum

Code: Select all

#!/bin/sh
#########   This script unmounts all disks, reboots the usb driver then reloads it then mounts all partitions found.
#(Thanks sunburnt for the mnt-all code, rcrsn51 for the ehci_hcd idea and musher0 for the unmount code)
###      Use at your own risk... No warranty!


# For auto. mounting at bootup, put this script in Puppy folder: /root/Startup

# After bootup, if other drives are plugged in, run mnt-all again to mount them.
#PREPARATION - unmount devices already mountd during boot
sleep 2
# ~/my-applications/bin/umount-only-disks.sh
####Musher0 code to unmount only disks
df -H -T -x squashfs -x tmpfs -x rootfs -x aufs -P | grep "/mnt/s" | cut -f2 -d'm' > spc_dsq.txt
while read line
do
umount /m$line
done < spc_dsq.txt
rm -f spc_dsq.txt
sleep 5

#SECTION 1 - remove the usb driver, then reload it
rmmod ehci_hcd
sleep 2
modprobe ehci_hcd
sleep 10

#SECTION 2 -  automount all drives and partitions
# This gets a list of all partition info. except swap and optical drives.
List=`probepart |egrep -v '(swap|sr|none)'`


# This "for" loop steps through the list one partition at a time.
for Line in $List
do
   Part=${Line%%\|*}                     # Get only partition.
   Part=${Part##*/}

   [ "`df |grep $Part`" ]&& continue         # Don`t mount, if done already.

   Type=${Line%\|*}                     # Get file system type.
   Type=${Type##*\|}

   [ -d /mnt/$Part ]|| mkdir /mnt/$Part      # Make the mount dir., if none.
   mount -t $Type /dev/$Part /mnt/$Part            # Mount the partition.
   echo "# Mount Partition:  $Part    Type:  $Type"   # Display mount info.
done