TahrPup 5.8.4

[666philb]

hi vicmz

see this http://askubuntu.com/questions/432542/i ... s-in-14-04

the static builds linked to there fire up ... or you could try symlinking /usr/bin/libav stuff calling it ffmpeg

[666philb]

nice wallpaper Billtoo, have you got a link?

[Billtoo]

nice wallpaper Billtoo, have you got a link?

Hi 666philb,

That wallpaper showed up along with 4 or 5 others when I installed FbBox-1.0_32Bit.pet

Enjoying tahrpup 582, thanks.

[666philb]

tahrpup 5.8.3 uploaded

this tahr is built using the new build method that allows easy changing of kernels.

it ships with kernel 3.14.11 but you can easily change it by downloading a new one from the 'kernels-huge' folder (in my dropbox) unzipping it and copying the vmlinuz & zdrive.sfs over the ones in your install directory.
there's four to choose from 3.12.22, 3.14.11, 3.15.4 & 3.9.94no pae from slacko. or build your own using the kernel kit in woof-ce

i've also added 'quickpet' although not everything is working at the moment.

updated
psync
sfs_load

fixed
pplog
right clicks (ish)

[James C]

Looking good so far.

Code: Select all

# report-video
VIDEO REPORT: tahrpup, version 5.8.3

Chip description:
VGA compatible controller: Intel Corporation 82865G Integrated Graphics Controller (rev 02)

Requested by /etc/X11/xorg.conf:
  Resolution (widthxheight, in pixels): 1024x768
  Depth (bits, or planes):              24
  Modules requested to be loaded:       dbe 

Probing Xorg startup log file (/var/log/Xorg.0.log):
  Driver loaded (and currently in use): intel
  Loaded modules: dbe dri2 extmod glx kbd mouse

Actual rendering on monitor:
  Resolution:  1024x768 pixels (270x203 millimeters)
  Depth:       24 planes

...the above also recorded in /tmp/report-video

Code: Select all

# glxgears
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
380 frames in 5.0 seconds = 75.990 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.134 FPS
376 frames in 5.0 seconds = 75.152 FPS
376 frames in 5.0 seconds = 75.143 FPS
376 frames in 5.0 seconds = 75.144 FPS
376 frames in 5.0 seconds = 75.143 FPS

Code: Select all

-Computer-
Processor		: 2x Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory		: 2060MB (395MB used)
Machine Type		: Physical machine
Operating System		: tahrpup - 5.8.3
User Name		: root (root)
Date/Time		: Fri 11 Jul 2014 02:18:22 PM CDT
-Display-
Resolution		: 1024x768 pixels
OpenGL Renderer		: Mesa DRI Intel(R) 865G x86/MMX/SSE2
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: ICH4 - Intel ICH5

[James C]

Second frugal install.....looks good too.

Code: Select all

# report-video
VIDEO REPORT: tahrpup, version 5.8.3

Chip description:
VGA compatible controller: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2)

Requested by /etc/X11/xorg.conf:
  Resolution (widthxheight, in pixels): 1024x768x16
  Depth (bits, or planes):              24
  Modules requested to be loaded:       dbe 

Probing Xorg startup log file (/var/log/Xorg.0.log):
  Driver loaded (and currently in use): nouveau
  Loaded modules: dbe dri2 exa extmod fb glx kbd mouse shadowfb

Actual rendering on monitor:
  Resolution:  1440x900 pixels (380x238 millimeters)
  Depth:       24 planes

...the above also recorded in /tmp/report-video

Code: Select all

# glxgears
964 frames in 5.0 seconds = 192.760 FPS
1114 frames in 5.0 seconds = 222.727 FPS
1109 frames in 5.0 seconds = 221.687 FPS
1109 frames in 5.0 seconds = 221.639 FPS
1110 frames in 5.0 seconds = 221.848 FPS

Code: Select all

-Computer-
Processor		: 2x AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Memory		: 3886MB (291MB used)
Machine Type		: Physical machine
Operating System		: tahrpup - 5.8.3
User Name		: root (root)
Date/Time		: Fri 11 Jul 2014 02:36:32 PM CDT
-Display-
Resolution		: 1440x900 pixels
OpenGL Renderer		: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: HDA-Intel - HDA NVidia
Audio Adapter		: PC-Speaker - pcsp
-Input Devices-

Code: Select all

# uname -a
Linux puppypc2168 3.15.4 #1 SMP Mon Jul 7 16:46:57 BST 2014 i686 athlon i686 GNU/Linux
# 

[sszindian]

Upgrade from 5.8.2 to 5.8.3

Everything super fine!!! No issues here on my part so far.

PS: 'Thanks' for the 'fix' that auto retains ones previous desktop setup!

>>>---Indian------>

PS: 'Very Nice Distro'

[666philb]

PS: 'Thanks' for the 'fix' that auto retains ones previous desktop setup!

>>>---Indian------>

that wasn't me i.... must be part of the latest woof-ce-testing

[gcmartin]

hello @666PhilB

Testing TahrPUP running in a KVM capable PC, shows a good speed increase in TahrPUP. But, there is a nagging issue that I wonder if you would consider resolving.

Video driver
The OOTB video card of a KVM virtual guest PC has a Cirrus card emulated. All other PUPs tested have a Cirrus module/driver and when the guests boot,they all find the Cirrus card and use it.

But, in TahrPUP,this is not occurring and there is no way to get X desktop via console of TahrPUP.

Fortunately, QEMU offers an option (-vga std) to set the VM guest PC as VESA video. Below is screenshots of QEMU setup for VESA and using FirstRUN to change the video map to match my 4X3 monitor from the TahrPUP default for a 16X10 origin.

Hope this is helpful

[01micko]

Nice

Good to see the new woof infrastructure working. Was it much hassle and if so what was the problem? (feel free to PM, email or post on the woof nabble forum or github).

It's really funny looking at a comparison of PUI (old) and the one I have been working on for a week. I have to get my finger out and commit the work!

Cheers!

[shinobar]

Thanks for the TahrPup 583.
The ffconvert in tahrpup 583 does not work.
The latest vrsion ffconvert-1.4.2 does work.
http://www.murga-linux.com/puppy/viewtopic.php?t=54056

Still have some issue with MPEG4-AVC.
TharPup does not have libfaac. Use ac3 instead for the audio codec.

[shinobar]

I hope this patch, applied to the Ubuntu 14.0.4, against the kernel which enables some pentium M hidden PAE.
https://lkml.org/lkml/2014/3/7/180

[Billtoo]

Installed to a 32gb flash drive with PUI.

video-info-glx 1.5.3 Sat 12 Jul 2014 on tahrpup 5.8.3 Linux 3.14.11 i686
0.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 430] (rev a1)
oem: NVIDIA
product: GF108 Board - 1071v0p1 Chip Rev
X Server: Xorg Driver: nvidia
X.Org version: 1.15.1
dimensions: 1920x1080 pixels (513x292 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: NVIDIA Corporation
server glx version string: 1.4
OpenGL vendor string: NVIDIA Corporation
OpenGL renderer string: GeForce GT 430/PCIe/SSE2/3DNOW!
OpenGL core profile version string: 4.2.0 NVIDIA 304.123

AMD Phenom(tm) II X6 1045T Processor
Core 0: @800 1: @800 2: @800 3: @800 4: @800 5: @800 MHz

Added applications from PPM, compiled wine-1.7.22, the dir2pet script
starts but never completes.

Working well so far.

[01micko]

Added applications from PPM, compiled wine-1.7.22, the dir2pet script
starts but never completes.

I just tested 'dir2pet' and both gz (default) and xz compression work fine and the pets install. Could you possibly mean 'new2dir'?

666philb. The default gtk-theme high-lighting doesn't have enough contrast.

[Billtoo]

Added applications from PPM, compiled wine-1.7.22, the dir2pet script
starts but never completes.

I just tested 'dir2pet' and both gz (default) and xz compression work fine and the pets install. Could you possibly mean 'new2dir'?

I did new2dir make install and when it got to the point where you press a key to create the pet I pressed the key and went into another window and ran PPM to install applications while I was waiting.
After PPM was finished (I'd guess 20 minutes) I went back to the original workspace expecting the pet had been created but it was still working.
I did ctrl-c to stop it and then did dir2pet on the wine-1.7.22-i686 directory and it ran for quite a while until I hit ctrl-c to stop it again, maybe too impatient.

I just compiled fltk then dillo-3.0.4 and the dillo pet was created no problem with the usual new2dir script.

Maybe the size of wine and my impatience but I made wine pets in Slacko 593 and earlier tahrpup's and had no problems at all, took a little longer I guess but did the job.

[01micko]

All right.. might have found the bug. I suspect (you are using a sd card install right?) that a snap-merge request was queued and as soon as
'new2dir' finished the snapmerge started. This is a bug in /usr/local/pup_event/frontend_timeout at line 77 because dir2pet is not in
that black list. Funny, I have been working on these scripts the last day or 2 and thought to myself "dir2pet should go in there..."

Also, the snapmerge may have started in the middle of dir2pet causing havoc.

So.. on the end of the 'grep' call tack on '|dir2pet' so it looks like this.

Code: Select all

[ "`echo "$RUNPS" | grep -w -E 'make|cc|gcc|imake|cmake|new2dir|xorriso|xorrecord|xine|gxine|petget|wget|axel|dotpup|mplayer|gmplayer|gcurl|gimv|burniso2cd|growisofs|cdrecord|pcdripper|xfmedia|xmms|ripoff|pdvdrsab|pburn|mhwaveedit|installpkg\.sh|downloadpkgs\.sh|removepreview\.sh|dir2pet'`" != "" ] && exit 1

Be aware that is 1 long line and the forum may not format it correctly (unless you have a quite large monitor).

(apologies to those with small monitors as this does stretch quite wide, no good at 1366*768 )

(Edited for typos)

[Billtoo]

All right.. might have found the bug. I suspect (you are using a sd card install right?) that a snap-merge request was queued and as soon as 'new2dir' finished the snapmerge started. This is a bug in /usrlocal/pup_event/frontend_timeout at line 77 because dir2pet is not in that black list. Funny, I have been working on these scripts the last day or 2 and thought to myself "dir2pet should go in there..."

So.. on the end of the 'grep' call tack on '|dir2pet' so it looks like this.

Code: Select all

[ "`echo "$RUNPS" | grep -w -E 'make|cc|gcc|imake|cmake|new2dir|xorriso|xorrecord|xine|gxine|petget|wget|axel|dotpup|mplayer|gmplayer|gcurl|gimv|burniso2cd|growisofs|cdrecord|pcdripper|xfmedia|xmms|ripoff|pdvdrsab|pburn|mhwaveedit|installpkg\.sh|downloadpkgs\.sh|removepreview\.sh|dir2pet'`" != "" ] && exit 1

Be aware that is 1 long line and the forum may not format it correctly (unless you have a quite large monitor).

Tahrpup is installed to a flash drive but likely about the same speedwise as an SDHC card.

I try to edit the code and report back if successful.

Thanks

EDIT: I got called to supper, edited the line to this:

[ "`echo "$RUNPS" | grep -w -E 'make|cc|gcc|imake|cmake|new2dir|xorriso|xorrecord|xine|gxine|petget|wget|axel|dotpup|mplayer|gmplayer|gcurl|gimv|burniso2cd|growisofs|cdrecord|pcdripper|xfmedia|xmms|ripoff|pdvdrsab|pburn|mhwaveedit|installpkg\.sh|downloadpkgs\.sh|removepreview\.sh|dir2pet'`" != "" ] && exit

Still can't make a wine pet, I'm going to try making a wine 1.7.22 pet on a new install of Slacko 5936 without editing the line and see if it works.

EDIT2: I did a new install of Slacko 5936 on a SDHC card and compiled wine-1.7.22 + made pets with no problems, I'll do another install of tahrpup 583 on this card and see how that goes.
Maybe the problem is with the flash drive, it take a long time for the pupsave file to update on that drive.

EDIT3: I'm dual booting Slacko 5936 and TahrPup 583 on this SDHC card.
I compiled wine 1.7.22 and started the new2dir script, it got to the hit key to continue point and when it called up the dir2pet scipt it gave the same result as my other install, it can't create the pets.
The htop screen shows this in both tahrpup installs (screenshot)

So I can make the wine pets in Slacko 5936 but not TahrPup 583 when running on the same SDHC card.

[James C]

Manual frugal install with k-3.15.4......... everything working pretty well so far.

Code: Select all

-Computer-
Processor		: 2x AMD Athlon(tm) 64 X2 Dual Core Processor 3800+
Memory		: 3886MB (466MB used)
Machine Type		: Physical machine
Operating System		: tahrpup - 5.8.3
User Name		: root (root)
Date/Time		: Sun 13 Jul 2014 12:23:53 AM CDT
-Display-
Resolution		: 1440x900 pixels
OpenGL Renderer		: Gallium 0.4 on NV67
X11 Vendor		: The X.Org Foundation
-Audio Devices-
Audio Adapter		: HDA-Intel - HDA NVidia
Audio Adapter		: PC-Speaker - pcsp

Code: Select all

-Version-
Kernel		: Linux 3.15.4 (i686)
Version		: #1 SMP Mon Jul 7 16:46:57 BST 2014
C Library		: GNU C Library version 2.19 (stable)
Distribution		: tahrpup - 5.8.3
-Current Session-
Computer Name		: puppypc2168
User Name		: root (root)
Home Directory		: /root
Desktop Environment		: Unknown (Window Manager: JWM)
-Misc-
Uptime		: 39 minutes
Load Average		: 0.61, 0.66, 0.66

[Billtoo]

Manual frugal install to an usb 3.0 hard drive.

video-info-glx 1.5.3 Sun 13 Jul 2014 on tahrpup 5.8.3 Linux 3.14.11 i686
2.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
oem: Intel(R) Sandybridge/Ivybridge Graphics Chipset Accelerated VGA BIOS
product: Intel(R) Sandybridge/Ivybridge Graphics Controller Hardware Version 0.0
X Server: Xorg Driver: intel
X.Org version: 1.15.1
dimensions: 1920x1080 pixels (507x285 millimeters)
depth of root window: 24 planes
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile x86/MMX/SSE2
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.1.3

Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz
Core 0: @1331 1: @1252 2: @1482 3: @1657 MHz

Working well.

[666philb]

Nice

Good to see the new woof infrastructure working. Was it much hassle and if so what was the problem? (feel free to PM, email or post on the woof nabble forum or github).

It's really funny looking at a comparison of PUI (old) and the one I have been working on for a week. I have to get my finger out and commit the work!

Cheers!

hi 01micko
i meant to add the new PUI but totally forgot!