TahrPup 5.8.4
Jdiskreport
First steps impeccables, nice desktop
Run Many QT apps, and Java
Jdiskreport (treesize, baobab, Gdmap will do the same)
Run Many QT apps, and Java
Jdiskreport (treesize, baobab, Gdmap will do the same)
- Attachments
-
- Tahr602.jpg
- Disk analyse par Jdiskreport
- (39.19 KiB) Downloaded 156 times
Last edited by Pelo on Mon 04 Jan 2016, 01:25, edited 3 times in total.
Tahr584 frugal install with savefile on fat32
With pfix=ram all works ok.
With pae version and a savefile audio stops working.
Sometimes keyboard and mouse cursor stop working.
If I use pfix=fsck then it seems to work ok.
Havent found these problems with the non pae version.
After using either version with a savefile and rebooting Windows7 always wants to scan the partition as it thinks something isnt right.
Precise and Slacko work ok.
With pfix=ram all works ok.
With pae version and a savefile audio stops working.
Sometimes keyboard and mouse cursor stop working.
If I use pfix=fsck then it seems to work ok.
Havent found these problems with the non pae version.
After using either version with a savefile and rebooting Windows7 always wants to scan the partition as it thinks something isnt right.
Precise and Slacko work ok.
Hi @Philh
Check you FAT partition (drive letter) on Win desktop to see if your Linux files remain at Win7 desktop time. I believe they do.
Hope this help.
I think that Win7 keeps a hash table and when he boots he uses that in an effort to insure that at desktop turnover, you have a set of filesystems Win7 thinks is clean. I seem to remember something that covers what you are witnessing on Win7 boot.Philh wrote:Windows7 always wants to scan the partition as it thinks something isnt right.
Check you FAT partition (drive letter) on Win desktop to see if your Linux files remain at Win7 desktop time. I believe they do.
Hope this help.
hi rg66,rg66 wrote:It refuses to work on my comp as frugal install, keep getting "puppy_tahr_5.8.4.sfs not found". So far this is the only puppy I've tried that hasn't booted frugal. It does boot from flash drive though, posting from it now
booting fine frugally on lots of different computers for me... what type of partiton is it?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
- Colonel Panic
- Posts: 2171
- Joined: Sat 16 Sep 2006, 11:09
The following process worked for me:Colonel Panic wrote:No sound here either
Goto Menu->Setup->Multiple Sound Card Wizard
Click on the item that is the sound card you are using->OK
Should see, "Sound card now set as default:" 'hw:n' (mine is 'hw:1'), remember the 'n'.
Exit out of Retrovol
Right click 'Retrovol' in tray->Config Window->Hardware
Change 'hw:0' to match 'n' from above, (mine is 'hw:1')->Apply
gyro
- Colonel Panic
- Posts: 2171
- Joined: Sat 16 Sep 2006, 11:09
Thanks, I'll try this suggestion the next time I use TahrPup.gyro wrote:The following process worked for me:Colonel Panic wrote:No sound here either
Goto Menu->Setup->Multiple Sound Card Wizard
Click on the item that is the sound card you are using->OK
Should see, "Sound card now set as default:" 'hw:n' (mine is 'hw:1'), remember the 'n'.
Exit out of Retrovol
Right click 'Retrovol' in tray->Config Window->Hardware
Change 'hw:0' to match 'n' from above, (mine is 'hw:1')->Apply
gyro
Best,
CP .
Back running live on the octo-core.
5.8.4 pae version on a pfix=ram boot kernel panics every attempt.Tried several times.
Booting pfix=ram,nox however,does boot to a prompt...xorgwizard only allows the modesetting driver (not nouveau),will pass the test but the goes to a non-responsive blinking cursor.Total no go.
But,the non-pae versions boots straight to the correct 1920x1080 desktop with working internet.Still no damn sound though.
Both versions appear to be working pretty normally on a bit older hardware though.
Not really a big deal to me since the most I'll do is run multi-session on here....no plans for any Linux installs on this box.
5.8.4 pae version on a pfix=ram boot kernel panics every attempt.Tried several times.
Booting pfix=ram,nox however,does boot to a prompt...xorgwizard only allows the modesetting driver (not nouveau),will pass the test but the goes to a non-responsive blinking cursor.Total no go.
But,the non-pae versions boots straight to the correct 1920x1080 desktop with working internet.Still no damn sound though.
Both versions appear to be working pretty normally on a bit older hardware though.
Code: Select all
# report-video
VIDEO REPORT: tahrpup, version 5.8.4
Chip description:
VGA compatible controller: NVIDIA Corporation GM107 [GeForce GTX 750] (rev a2)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768x16
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe ddc extmod fb glx int10 kbd mouse shadow vbe vesa
Actual rendering on monitor:
Resolution: 1920x1080 pixels (508x286 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
Code: Select all
# glxgears
2571 frames in 5.0 seconds = 514.141 FPS
2942 frames in 5.0 seconds = 588.305 FPS
2953 frames in 5.0 seconds = 590.523 FPS
2956 frames in 5.0 seconds = 591.124 FPS
Code: Select all
-Computer-
Processor : 8x AMD FX(tm)-8320 Eight-Core Processor
Memory : 3024MB (265MB used)
Machine Type : Physical machine
Operating System : tahrpup - 5.8.4
User Name : root (root)
Date/Time : Wed 22 Oct 2014 02:48:09 AM CDT
-Display-
Resolution : 1920x1080 pixels
OpenGL Renderer : Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : HDA-Intel - HDA ATI SB
Audio Adapter : HDA-Intel - HDA NVidia
Audio Adapter : PC-Speaker - pcsp
-Input Devices-
Power Button
Power Button
AT Translated Set 2 keyboard
PC Speaker
Logitech USB-PS/2 Optical Mouse
-Printers (CUPS)-
CUPS-PDF : <i>Default</i>
-SCSI Disks-
ATA KINGSTON SV300S3
ATA WDC WD10EZEX-08M
TSSTcorp CDDVDW SH-224DB
Not really a big deal to me since the most I'll do is run multi-session on here....no plans for any Linux installs on this box.
try giros instructions hereandreazzz wrote:Hi,
Thank you very much for developing this awesome distro!
I only have one remark: I cannot get my audio to work in either 5.8.3 or 5.8.4, nor in Slacko 5.4 Opera. My sound-chip is a ALC892 (Intel HDA/Azalia) on a Asrock E350M1 board. When I play audio, I don't hear anything on my 3.5mm headphones or HiFi-system. Changing the output mode in the ALSA mixer doesn't matter (S/PDIF,HDMI and analog).
What also seems a little weird is that I cannot change anything, I can only put a tick in box for the digital output (even when I have "Analog" selected).
Now Puppy does not recognize any sound card.
I have already tried the realtek drivers you posted without result.
Do you know what might be causing the problem?
http://murga-linux.com/puppy/viewtopic. ... &start=577
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
is this the PAE or noPAE version?augras wrote:Hi,Yes, the problem is only with guvcview !666philb wrote:hi augras, is the webcam working in skype on tahrpup?
And, it's an other question, i don't understand why the computer is faster with tahrpup 5.8.3 rc1 than with 5.8.4 : with 5.8.4 the harddisk is always run (frugal install)!
Philippe
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Hi @Philh.
I know this is a little late, but, if may help others, too, who have a Windows PC and also use PUPs on that PC. From time to time we need to adjust partition sizes for various normal needs.
See this thread for a simple guideline.
Hope this helps in the future
I know this is a little late, but, if may help others, too, who have a Windows PC and also use PUPs on that PC. From time to time we need to adjust partition sizes for various normal needs.
See this thread for a simple guideline.
Hope this helps in the future
5.8.4 PAE was a total no-go on the 8-core box but zero problems on this older quad-core box. Manual frugal install.
Code: Select all
## report-video
VIDEO REPORT: tahrpup, version 5.8.4
Chip description:
VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
Requested by /etc/X11/xorg.conf:
Resolution (widthxheight, in pixels): 1024x768x16
Depth (bits, or planes): 24
Modules requested to be loaded: dbe
Probing Xorg startup log file (/var/log/Xorg.0.log):
Driver loaded (and currently in use): nouveau
Loaded modules: dbe dri2 exa extmod fb glx kbd mouse shadowfb
Actual rendering on monitor:
Resolution: 1440x900 pixels (380x238 millimeters)
Depth: 24 planes
...the above also recorded in /tmp/report-video
Code: Select all
# glxgears
Running synchronized to the vertical refresh. The framerate should be
approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.245 FPS
299 frames in 5.0 seconds = 59.688 FPS
301 frames in 5.0 seconds = 60.073 FPS
300 frames in 5.0 seconds = 59.885 FPS
299 frames in 5.0 seconds = 59.696 FPS
Code: Select all
-Computer-
Processor : 4x AMD Athlon(tm) II X4 620 Processor
Memory : 4148MB (424MB used)
Machine Type : Physical machine
Operating System : tahrpup - 5.8.4
User Name : root (root)
Date/Time : Wed 22 Oct 2014 11:43:54 PM CDT
-Display-
Resolution : 1440x900 pixels
OpenGL Renderer : Gallium 0.4 on NVA8
X11 Vendor : The X.Org Foundation
-Audio Devices-
Audio Adapter : HDA-Intel - HDA NVidia
Audio Adapter : HDA-Intel - HDA NVidia
Audio Adapter : PC-Speaker - pcsp
It's on the nopae.666philb wrote:is this the PAE or noPAE version?augras wrote:Hi,Yes, the problem is only with guvcview !666philb wrote:hi augras, is the webcam working in skype on tahrpup?
And, it's an other question, i don't understand why the computer is faster with tahrpup 5.8.3 rc1 than with 5.8.4 : with 5.8.4 the harddisk is always run (frugal install)!
Philippe
Philippe
http://www.murga-linux.com/puppy/viewto ... &start=120
http://www.murga-linux.com/puppy/viewto ... &start=195
shinobar
TahrPup 5.8.4????????????
http://www.murga-linux.com/puppy/viewto ... &start=195
shinobar
TahrPup 5.8.4????????????
linux28,
sorry a few fixes didn't make it in to the iso..... to fix that type this into a terminal
sorry a few fixes didn't make it in to the iso..... to fix that type this into a terminal
Code: Select all
ln -s /etc/gtk-2.0/gtk.immodules /usr/lib/gtk-2.0/2.10.0/immodules.cache
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
- luiscuadrado123
- Posts: 58
- Joined: Wed 29 Jan 2014, 18:57
Hello!!
i am trying TahrPup 5.8.4 on a virtual machine first.. and i can't get running PlayOnLinux on it..
i have working POL with this tutorial in PRECISE PUPPY
http://www.murga-linux.com/puppy/viewtopic.php?t=90396
but I can't install the PlayOnLinux-4.2.4.pet on TahrPup 5.8.4..
and if i install it from de package manage, when i try to run it, i get:
POL is no supposed to be run as root. Sorry
what can i do?!?!?!
thanks!
why you remove my post?
i am trying TahrPup 5.8.4 on a virtual machine first.. and i can't get running PlayOnLinux on it..
i have working POL with this tutorial in PRECISE PUPPY
http://www.murga-linux.com/puppy/viewtopic.php?t=90396
but I can't install the PlayOnLinux-4.2.4.pet on TahrPup 5.8.4..
and if i install it from de package manage, when i try to run it, i get:
POL is no supposed to be run as root. Sorry
what can i do?!?!?!
thanks!
why you remove my post?
Last edited by luiscuadrado123 on Sun 26 Oct 2014, 00:55, edited 1 time in total.