TahrPup 5.8.4
cups
(1)Fresh download tahr-5.8.0.8 (downloaded with Racy-5.5, checksum varified)
(2)Created new savefile (different HDD)
(3)Installed hplip-14's (from rcrsn51 thread)
(4)Installed tahrfix-5.8.0.8.pet
Same as with previous tahr-5.8.0.8, cups will NOT recognize my HP USB 1050 All-In-One Printer!!!!!! Only available printer available for setup is the PFD Printer in cups.
I will have to conclude that it's 'tahr' that has the issue and not myself or my equipment.
>>>---Indian------>
(2)Created new savefile (different HDD)
(3)Installed hplip-14's (from rcrsn51 thread)
(4)Installed tahrfix-5.8.0.8.pet
Same as with previous tahr-5.8.0.8, cups will NOT recognize my HP USB 1050 All-In-One Printer!!!!!! Only available printer available for setup is the PFD Printer in cups.
I will have to conclude that it's 'tahr' that has the issue and not myself or my equipment.
>>>---Indian------>
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Here are some things to try.
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
With your printer turned ON, type
Is this module loaded? If not, load it
Check your printer in CUPS.
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
With your printer turned ON, type
Code: Select all
lsmod | grep usblp
Code: Select all
modprobe usblp
cups
Here are some things to try.
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
sszindian: it says- bash: ./usb: No such file or directory/dev
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
sszindian: No
With your printer turned ON, type
Code:
lsmod | grep usblp
Is this module loaded? If not, load it
Code:
modprobe usblp
Check your printer in CUPS.
sszindian: Nope, not there!
1. Go to the folder /usr/lib/cups/backend
2. Open a terminal
3. Type: ./usb
Does it find anything?
sszindian: it says- bash: ./usb: No such file or directory/dev
Then go to the folder /dev. Turn the printer off and on several times. Do you see the folder "usb" being created/deleted?
sszindian: No
With your printer turned ON, type
Code:
lsmod | grep usblp
Is this module loaded? If not, load it
Code:
modprobe usblp
Check your printer in CUPS.
sszindian: Nope, not there!
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
Are you saying that your folder /usr/lib/cups/backend does NOT contain the executable file named "usb"?
If you do NOT have this file, then it certainly explains your problem.
But it does not explain why this file is missing. I have it in my Tahr.
If you do NOT have this file, then it certainly explains your problem.
But it does not explain why this file is missing. I have it in my Tahr.
You never answered this question.Is this module loaded?
cups
Maybe a couple pictures will explain what you ask?
>>>---Indian------>
>>>---Indian------>
- Attachments
-
- cups-2.png
- (10.76 KiB) Downloaded 908 times
-
- cups-1.png
- (31.74 KiB) Downloaded 924 times
Cloud Computing For Every Puppy (a .pet)
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
[url]http://murga-linux.com/puppy/viewtopic.php?t=69192[/url]
CUPS on Tahr Puppy
I have tested my printer which is working on Precise Puppy 571JP.
Tahr Puppy 5.8.0.8 furugal install RAM mode.
Installed the driver epson_inkjet_printer_escpr-1.4.0.pet.
Typed on a virtual terminal:
But the CUPS does not show my USB printer on the list of the Local Prnters
Installed gstoraster_s533-9.05.pet... same result.
Installed tahrfix-5.8.0.8.pet ... same result.
.
In all cases, the CUPS does not show my USB printer
Tahr Puppy 5.8.0.8 furugal install RAM mode.
Installed the driver epson_inkjet_printer_escpr-1.4.0.pet.
Typed on a virtual terminal:
Code: Select all
# /usr/lib/cups/backend/usb
direct usb://EPSON/EP-704A "EPSON EP-704A" "EPSON EP-704A" "MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX,ESCPR2;MDL:EP-704A;CLS:PRINTER;DES:EPSON EP-704A;CID:EpsonRGB;FID:FXN,DPN,WFN,ETN,AFN,DAN;" ""
Installed gstoraster_s533-9.05.pet... same result.
Installed tahrfix-5.8.0.8.pet ... same result.
.
In all cases, the CUPS does not show my USB printer
- Attachments
-
- cups_doesnt_show_usb_printer.png
- (4.87 KiB) Downloaded 856 times
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
CUPS on Tahr Puppy does not show my USB printer
1. Power off the USB connected printer
2. Boot the Tahr Puppy 5.8.0.8 without pupsave
3. Power on the USB connected printer
CUPS --> Administration --> Add Printer shows only the SCSI Printer and PDF writer on the Local Printers list.
I couldn't find anything particular in /var/log/cups/error.log.
2. Boot the Tahr Puppy 5.8.0.8 without pupsave
3. Power on the USB connected printer
Code: Select all
# /usr/lib/cups/backend/usb
direct usb://EPSON/EP-704A "EPSON EP-704A" "EPSON EP-704A" "MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX,ESCPR2;MDL:EP-704A;CLS:PRINTER;DES:EPSON EP-704A;CID:EpsonRGB;FID:FXN,DPN,WFN,ETN,AFN,DAN;" ""
# ls /dev/usb/lp0
/dev/usb/lp0
# lsmod | grep usblp
usblp 7582 0
I couldn't find anything particular in /var/log/cups/error.log.
Last edited by shinobar on Wed 11 Jun 2014, 14:41, edited 2 times in total.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
Find New Printers
Tried again and agin, but only the PDF writer shows.rcrsn51 wrote:Try clicking on Find New Printers.
Downloads for Puppy Linux [url]http://shino.pos.to/linux/downloads.html[/url]
rcrsn51
i can reproduce this odd problem ... printing is working on my netbook on a vanilla tahr5.8.0.8 with your pet or mine (this is the computer i've been using for testing) but i've just tried on my desktop, same setup as above and the same printer isn't found.
output is the same on both computers
i can reproduce this odd problem ... printing is working on my netbook on a vanilla tahr5.8.0.8 with your pet or mine (this is the computer i've been using for testing) but i've just tried on my desktop, same setup as above and the same printer isn't found.
output is the same on both computers
Code: Select all
# /usr/lib/cups/backend/usb
direct usb://hp/deskjet%205550?serial=MY29A1J2NS2L "hp deskjet 5550" "hp deskjet 5550" "MFG:hp;MDL:deskjet 5550;CID:hpdeskjet_5550A851;CMD:MLC,PCL,PML,DW-PCL,DYN,DESKJET;CLS:PRINTER;DES:hp deskjet 5550;SN:MY29A1J2NS2L;S:0380008084001000002c14d0000c2570000;P:1962,FL,B0;J: ;" ""
# ls /dev/usb/lp0
/dev/usb/lp0
# lsmod | grep usblp
usblp 7582 0
#
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
This is like the occasional situation where CUPS refuses to detect a network printer. In that case, you can manually install the printer using the AppSocket/JetDirect protocol.
I don't know why it is happening with a USB printer, but can someone try this?
1. Run CUPS. Under Add Printer, select AppSocket/JetDirect.
2. On the next screen, delete "socket" and type "parallel:/dev/usb/lp0"
3. Finish the install as usual. You will still need the gstoraster patch.
Then try using the URI that comes out of /usr/lib/cups/backend/usb, like
I don't know why it is happening with a USB printer, but can someone try this?
1. Run CUPS. Under Add Printer, select AppSocket/JetDirect.
2. On the next screen, delete "socket" and type "parallel:/dev/usb/lp0"
3. Finish the install as usual. You will still need the gstoraster patch.
Then try using the URI that comes out of /usr/lib/cups/backend/usb, like
Code: Select all
usb://hp/deskjet%205550?serial=MY29A1J2NS2L
hi rcrsn51,
can you explain how to do the last bit 'use the URI'?
can you explain how to do the last bit 'use the URI'?
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
with the first method i get "Unable to open device file "/dev/usb/lp0": Permission denied" in the jobs tab
and the second method just says "Rendering completed" and then doesn't print
and the second method just says "Rendering completed" and then doesn't print
Bionicpup64 built with bionic beaver packages http://murga-linux.com/puppy/viewtopic.php?t=114311
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Xenialpup64, built with xenial xerus packages http://murga-linux.com/puppy/viewtopic.php?t=107331
Go to /etc/udev/rules.d
Open the file 55-cups.rules in a text editor. Changeto
That will give the printer device node 666 permissions.
Open the file 55-cups.rules in a text editor. Change
Code: Select all
SUBSYSTEM=="usb"
Code: Select all
SUBSYSTEM=="usbmisc"
I have a desktop computer with Tahr 5.8.0.8 fresh frugal install connected
to a HP1050 using a local usb cable.
I went Cups - Admin - Add printer and it does show HP Deskjet 1050 j410
series...
I clicked on the circle and it continued to next screen ok.
My computer is 5 years old and has AMI bios v0702. You might check your
bios setup - usb configuration - Legacy usb support. I have mine set to
"enabled".
Have you tried a different usb cable?
to a HP1050 using a local usb cable.
I went Cups - Admin - Add printer and it does show HP Deskjet 1050 j410
series...
I clicked on the circle and it continued to next screen ok.
My computer is 5 years old and has AMI bios v0702. You might check your
bios setup - usb configuration - Legacy usb support. I have mine set to
"enabled".
Have you tried a different usb cable?
Definitely some weird printing issue. My USB Cannon-MP490 is detected fine, driver installs fine then I get a mime error
Code: Select all
I [02/Jun/2014:04:26:55 +2300] Listening to [v1.::1]:631 (IPv6)
I [02/Jun/2014:04:26:55 +2300] Listening to 127.0.0.1:631 (IPv4)
I [02/Jun/2014:04:26:55 +2300] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jun/2014:04:26:55 +2300] Remote access is disabled.
I [02/Jun/2014:04:26:55 +2300] Loaded configuration file "/etc/cups/cupsd.conf"
I [02/Jun/2014:04:26:55 +2300] Using default TempDir of /var/spool/cups/tmp...
I [02/Jun/2014:04:26:55 +2300] Configured for up to 100 clients.
I [02/Jun/2014:04:26:55 +2300] Allowing up to 100 client connections per host.
I [02/Jun/2014:04:26:55 +2300] Using policy "default" as the default!
I [02/Jun/2014:04:26:55 +2300] Full reload is required.
I [02/Jun/2014:04:26:55 +2300] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 36 types, 40 filters...
I [02/Jun/2014:04:26:55 +2300] Generating printcap /etc/printcap...
I [02/Jun/2014:04:26:55 +2300] Full reload complete.
I [02/Jun/2014:04:26:55 +2300] Cleaning out old files in "/var/spool/cups/tmp"...
I [02/Jun/2014:04:26:55 +2300] Cleaning out old files in "/var/cache/cups"...
E [02/Jun/2014:04:26:55 +2300] Unable to open listen socket for address [v1.::1]:631 - Address family not supported by protocol.
I [02/Jun/2014:04:26:55 +2300] Listening to 127.0.0.1:631 on fd 4...
I [02/Jun/2014:04:26:55 +2300] Listening to /var/run/cups/cups.sock on fd 6...
I [02/Jun/2014:04:26:55 +2300] Resuming new connection processing...
I [02/Jun/2014:04:27:26 +2300] Saving printers.conf...
I [02/Jun/2014:02:30:55 +2300] Scheduler shutting down normally.
I [02/Jun/2014:02:30:55 +2300] Saving job cache file "/var/cache/cups/job.cache"...
I [02/Jun/2014:02:32:03 +2300] Listening to [v1.::1]:631 (IPv6)
I [02/Jun/2014:02:32:03 +2300] Listening to 127.0.0.1:631 (IPv4)
I [02/Jun/2014:02:32:03 +2300] Listening to /var/run/cups/cups.sock (Domain)
I [02/Jun/2014:02:32:03 +2300] Remote access is disabled.
I [02/Jun/2014:02:32:03 +2300] Loaded configuration file "/etc/cups/cupsd.conf"
I [02/Jun/2014:02:32:03 +2300] Using default TempDir of /var/spool/cups/tmp...
I [02/Jun/2014:02:32:03 +2300] Configured for up to 100 clients.
I [02/Jun/2014:02:32:03 +2300] Allowing up to 100 client connections per host.
I [02/Jun/2014:02:32:03 +2300] Using policy "default" as the default!
I [02/Jun/2014:02:32:03 +2300] Full reload is required.
I [02/Jun/2014:02:32:03 +2300] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 36 types, 40 filters...
I [02/Jun/2014:02:32:03 +2300] Loading NextJobId from job cache file "/var/cache/cups/job.cache"...
I [02/Jun/2014:02:32:03 +2300] Full reload complete.
I [02/Jun/2014:02:32:03 +2300] Cleaning out old files in "/var/spool/cups/tmp"...
I [02/Jun/2014:02:32:03 +2300] Cleaning out old files in "/var/cache/cups"...
E [02/Jun/2014:02:32:03 +2300] Unable to open listen socket for address [v1.::1]:631 - Address family not supported by protocol.
I [02/Jun/2014:02:32:03 +2300] Listening to 127.0.0.1:631 on fd 4...
I [02/Jun/2014:02:32:03 +2300] Listening to /var/run/cups/cups.sock on fd 6...
I [02/Jun/2014:02:32:03 +2300] Resuming new connection processing...
I [02/Jun/2014:02:32:35 +2300] Saving printers.conf...
I [02/Jun/2014:03:46:21 +2300] Scheduler shutting down normally.
I [02/Jun/2014:03:46:21 +2300] Saving job cache file "/var/cache/cups/job.cache"...
I [13/Jun/2014:10:25:23 +2300] Listening to [v1.::1]:631 (IPv6)
I [13/Jun/2014:10:25:23 +2300] Listening to 127.0.0.1:631 (IPv4)
I [13/Jun/2014:10:25:23 +2300] Listening to /var/run/cups/cups.sock (Domain)
I [13/Jun/2014:10:25:23 +2300] Remote access is disabled.
I [13/Jun/2014:10:25:23 +2300] Loaded configuration file "/etc/cups/cupsd.conf"
I [13/Jun/2014:10:25:23 +2300] Using default TempDir of /var/spool/cups/tmp...
I [13/Jun/2014:10:25:23 +2300] Configured for up to 100 clients.
I [13/Jun/2014:10:25:23 +2300] Allowing up to 100 client connections per host.
I [13/Jun/2014:10:25:23 +2300] Using policy "default" as the default!
I [13/Jun/2014:10:25:23 +2300] Full reload is required.
I [13/Jun/2014:10:25:23 +2300] Loaded MIME database from "/usr/share/cups/mime" and "/etc/cups": 36 types, 40 filters...
I [13/Jun/2014:10:25:23 +2300] Loading NextJobId from job cache file "/var/cache/cups/job.cache"...
I [13/Jun/2014:10:25:23 +2300] Full reload complete.
I [13/Jun/2014:10:25:23 +2300] Cleaning out old files in "/var/spool/cups/tmp"...
I [13/Jun/2014:10:25:23 +2300] Cleaning out old files in "/var/cache/cups"...
E [13/Jun/2014:10:25:24 +2300] Unable to open listen socket for address [v1.::1]:631 - Address family not supported by protocol.
I [13/Jun/2014:10:25:24 +2300] Listening to 127.0.0.1:631 on fd 4...
I [13/Jun/2014:10:25:24 +2300] Listening to /var/run/cups/cups.sock on fd 6...
I [13/Jun/2014:10:25:24 +2300] Resuming new connection processing...
I [13/Jun/2014:10:25:54 +2300] Saving printers.conf...
I [13/Jun/2014:10:28:00 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=31749)
I [13/Jun/2014:10:28:04 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=31818)
I [13/Jun/2014:10:28:04 +2300] Started "/usr/lib/cups/daemon/cups-deviced" (pid=31819)
I [13/Jun/2014:10:28:19 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=32021)
I [13/Jun/2014:10:28:22 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=32086)
I [13/Jun/2014:10:28:22 +2300] Started "/usr/lib/cups/daemon/cups-driverd" (pid=32087)
I [13/Jun/2014:10:28:22 +2300] [cups-driverd] Wrote "/var/cache/cups/ppds.dat", 776 PPDs...
I [13/Jun/2014:10:28:31 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=32215)
I [13/Jun/2014:10:28:31 +2300] Setting Canon_MP490_series device-uri to "usb://Canon/MP490%20series" (was "file:///dev/null".)
I [13/Jun/2014:10:28:31 +2300] Setting Canon_MP490_series printer-is-accepting-jobs to 1 (was 0.)
I [13/Jun/2014:10:28:31 +2300] Setting Canon_MP490_series printer-is-shared to 0 (was 1.)
I [13/Jun/2014:10:28:31 +2300] Setting Canon_MP490_series printer-state to 3 (was 5.)
I [13/Jun/2014:10:28:31 +2300] New printer "Canon_MP490_series" added by "anonymous".
I [13/Jun/2014:10:28:41 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=32364)
I [13/Jun/2014:10:28:41 +2300] Printer "Canon_MP490_series" modified by "anonymous".
I [13/Jun/2014:10:28:46 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=32441)
I [13/Jun/2014:10:28:46 +2300] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32442)
I [13/Jun/2014:10:28:52 +2300] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=32519)
I [13/Jun/2014:10:28:52 +2300] [Job ???] Request file type is application/vnd.cups-banner.
E [13/Jun/2014:10:28:52 +2300] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Canon_MP490_series) from localhost
I [13/Jun/2014:10:29:02 +2300] Saving printers.conf...
I [13/Jun/2014:10:29:02 +2300] Generating printcap /etc/printcap...
I [13/Jun/2014:10:29:56 +2300] [Job ???] Request file type is application/pdf.
E [13/Jun/2014:10:29:56 +2300] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Canon_MP490_series) from localhost
I [13/Jun/2014:10:31:08 +2300] [Job ???] Request file type is application/pdf.
E [13/Jun/2014:10:31:08 +2300] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Canon_MP490_series) from localhost
I [13/Jun/2014:10:31:21 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=2243)
I [13/Jun/2014:10:31:23 +2300] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=2271)
I [13/Jun/2014:10:31:26 +2300] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=2321)
I [13/Jun/2014:10:31:46 +2300] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=2617)
I [13/Jun/2014:10:31:46 +2300] [Job ???] Request file type is application/vnd.cups-banner.
E [13/Jun/2014:10:31:46 +2300] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Canon_MP490_series) from localhost
I [13/Jun/2014:10:32:09 +2300] [Job ???] Request file type is application/pdf.
E [13/Jun/2014:10:32:09 +2300] Returning IPP client-error-document-format-not-supported for Print-Job (ipp://localhost:631/printers/Canon_MP490_series) from localhost
I [13/Jun/2014:10:32:33 +2300] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=3327)
Puppy Linux Blog - contact me for access