Fatdog64 Contributed Packages and SFS

Talk about and post software packages known to work or packaged for Puppy.
Message
Author
User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#256 Post by smokey01 »

smokey01 wrote:
jake29 wrote:@smokey01 - Sorry for the delay - HDD failure on my desktop. Hardware ID of the printer is probably essential to allowing CUPS to find the driver. Are you able to get this ID? example: 0x0282,13,1,"MFC-J625DW"

Here is a corrected version of the file previously uploaded: brother-print-scan-modified_fixed.tar.xz
Thanks jake I will check it out. I now have my hands on the printer so I should be able to get the printer ID. Will advise.
jake29, tried your new package and it didn't work either.

Device ID appears to be 025c.
lsusb reports: Bus 007 Device 002: ID 04f9:025c Brother Industries, Ltd

I hope that helps.

I also run this machine as root, not spot. Too many restrictions using spot.

When it didn't work using your package, well I turned it into a package then installed it, I tried using just the ppd file and that didn't work either.

I was expecting to see the driver (mfc-j415w) show up in cups for selection. It didn't. Just two entries of BrGenML1 for CUPS (en).

See attached:
Attachments
cups.png
CUPS
(29.73 KiB) Downloaded 1360 times

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#257 Post by smokey01 »

I've solved the Brother MFC-J415W printer problem with a little help from CatDude.
There is a script that will download and install the appropriate drivers for your brother printer and scanner. Unfortunately the script did not work properly in Fatdog64-720 as it requires dpkg, a debian package installer. The dpkg in Fatdog is a cut down version in busybox. The good news a full version is available in the package manager so I installed that.

Download a copy of the Download Install Tool here:
http://support.brother.com/g/b/download ... &type3=625

Directions on running the script will be displayed after agreeing to the EULA.

Before running the script you need to load the 32bit library SFS then Install perl and ghostscript from the package manager.

Thanks to all who offered help.

jake29
Posts: 253
Joined: Fri 24 Jul 2015, 17:47

#258 Post by jake29 »

@smokey01 - Glad to hear you got the issue resolved.

jake29
Posts: 253
Joined: Fri 24 Jul 2015, 17:47

resetmsmice

#259 Post by jake29 »

resetmsmice_fixed.sfs - This utility, resetmsmice, fixes scroll wheel issues with certain Wireless Microsoft mice in X.org, where the vertical wheel scrolls abnormally fast. Usage: 'Reset Now' and close.

SFS includes startup script.

Only required once per session. Without this utility, mouse usb transmitter needs to be unplugged and reconnected to resolve issue.

EDIT: Re-uploaded sfs due to missing files.
Last edited by jake29 on Tue 06 Mar 2018, 22:47, edited 2 times in total.

step
Posts: 1349
Joined: Fri 04 May 2012, 11:20

#260 Post by step »

Recently uploaded packages and SFS files:
  • rxvt unicode SFS (perl) 9.22 git 2018.01.29_0767fe7. This is a bleeding edge build of urxvt terminal with support for **TRUE COLOR**, named tabs, clickable URLs, on-the-fly font resizing, scroll buffer text search, and more. Load from SFS manager. The binaries are located in /usr/local/bin and coexist with the standard urxvt package. Perl 5.20.00 (devx) is required for use. >>More info. See also background information about "Perl Versions" further down.
  • vimpager 2.06_351_gfdc74aa git - view text files with syntax highlighting (for vim users). Install from package manager.
  • rxvt unicode (perl) 9.22 build 3. This is a rebuild of urxvt terminal with support for 256 colors, named tabs, clickable URLs, on-the-fly font resizing, scroll buffer text search, and more. Install from package manager. Perl 5.20.00 is required for installation and use. >>More info. See also background information about "Perl Versions" further down.
  • rstudio 1.1.419, R IDE. Install from package manager or load the corresponding SFS file from SFS manager. Release >>info and support.
  • progress 2017.11.06 git - Tiny command-line progress monitor for cp/mv/etc. Install from package manager.
  • wine 3.0 SFS - Windows emulator. Load from SFS manager.
  • ninja 2018.01.25 git - Small and fast build system. Required to build package neovim. Install from package manager.
  • re2c 1.0.3 - Generator of fast lexers. Required to build package ninja. Install from package manager.
  • calibre 3.15.0 SFS - E-book manager. Load from SFS manager.
  • aria2 1.33.1 - Lightweight multi-protocol & multi-source command-line download utility. Install from package manager.
  • wimlib 1.12.0 - File archiving of Windows Imaging (WIM) files. Wimlib also includes (de)compressors for several Microsoft compression formats (not just WIM). Install from package manager.
[url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Fatdog64-810[/url]|[url=http://goo.gl/hqZtiB]+Packages[/url]|[url=http://goo.gl/6dbEzT]Kodi[/url]|[url=http://goo.gl/JQC4Vz]gtkmenuplus[/url]

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#261 Post by don570 »

A GUI for mpscan - to obtain live addresses on a network

MPscan-GUI-1.0.txz
see below
Last edited by don570 on Wed 28 Feb 2018, 00:01, edited 1 time in total.

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#262 Post by don570 »

The latest pmirror -- 6.2
I put mirdir inside package to be sure it's there.

Size 13k
pmirror-0.6.2-x86_64.txz
https://drive.google.com/open?id=1WJHJE ... b2qafpDbqq
__________________________________________

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#263 Post by don570 »

mpscangui - find network addresses with mpscan

I included 'getlocalip' which is a quick way to get local eth0 and wireless address


mpscangui-1.1-x86_64.txz
Size: 8k
https://drive.google.com/open?id=16uAUy ... XxAMHx37DE
___________________________________________
Attachments
screenshot-mpscangui.png
(52.68 KiB) Downloaded 978 times

step
Posts: 1349
Joined: Fri 04 May 2012, 11:20

#264 Post by step »

Maybe it's already been mentioned in this thread, so anyway
here CatDude explains how to make the Fatdog64-710 Skype 4.3 SFS work in spite of current Skype updates. I tested CatDude's method on Fatdog64-721 and it worked for me. I was able to see my Skype contacts and make calls. Other testers report that the method works for them too, but they have to re-enter their skype contacts. I suspect that their skype profile was created with skype 8, so skype 4.3 can't decode some of it. YMMV
[url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Fatdog64-810[/url]|[url=http://goo.gl/hqZtiB]+Packages[/url]|[url=http://goo.gl/6dbEzT]Kodi[/url]|[url=http://goo.gl/JQC4Vz]gtkmenuplus[/url]

watchdog
Posts: 2021
Joined: Fri 28 Sep 2012, 18:04
Location: Italy

How I have got working my Brother Hl2130 printer

#265 Post by watchdog »

Load 32 bit sfs and install ghostscript. In /root/Startup put a script with execute permissions:

Code: Select all

#!/bin/sh
/etc/init.d/70-cups stop
start32 /etc/init.d/70-cups start
Copy in in /usr/bin "debbi" script from a rcrsn51's package (thanks!) with execute permissions:

Code: Select all

#!/bin/sh
#the Debian-Brother Installer
#rcrsn51 2009-06-15
#installs a Debian printer package and executes the post-install script
#usage: debbi filename.deb 

if [ $# = 0 ]; then
  exit
fi

if [ ! -e $1 ]; then
  echo "File not found!"
  exit
fi

EXT=${1##*.}
if [ "$EXT" != "deb" ]; then
  echo "Not a .deb file!"
  exit
fi

mkdir -p /var/spool/lpd

dpkg-deb -x $1 /
dpkg-deb -e $1
if [ -e DEBIAN/postinst ]; then
  sh DEBIAN/postinst
  echo "Post-install script completed!"
fi
rm -rf DEBIAN
echo "Done!"
Install lpr and cupswrapper drivers of the brother printer with debbi:

Code: Select all

debbi /path-to/hl2130lpr-2.1.0-1.i386.deb
debbi /path-to/cupswrapperHL2130-2.0.4-2.i386.deb
There was an error installing the drivers but my printer works after a reboot.

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

arpscan 1.9.5

#266 Post by don570 »

arpscan 1.9.5 64 bit
source --->https://github.com/royhills/arp-scan

Download:
arpscangui-1.9.5-x86_64.txz
Size: 28k
https://drive.google.com/open?id=14UVWG ... itSqeZjq1m
I prefer arpscan over mpscan. It is larger in size but the features are worth it.

As well mpscan I have found that mpscan doesn't work with a crossover
ethernet cable that I have constructed. :cry:

Instructions for use:
http://www.nta-monitor.com/wiki/index.p ... User_Guide

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#267 Post by don570 »

Here is right click utility to quickly open a HTML file with right click.
Geany will open a temporary copy.
Note that package requires python package to installed.
You can download it from ibiblio reporsitory.
http://distro.ibiblio.org/fatdog/packag ... 6_64-1.txz


html2txt-x86_64.txz

Size: 17k

Download:
https://drive.google.com/open?id=1Hb1mE ... CZBexS7kHy

_____________________________________________________


Tip:

When using my version of mypaint 1.3 , make sure you also place
mimeinfo.cache inside the folder /usr/share/applications/


This allows gimp to be used as external program.

________________________________________
Last edited by don570 on Mon 19 Mar 2018, 23:05, edited 1 time in total.

step
Posts: 1349
Joined: Fri 04 May 2012, 11:20

#268 Post by step »

Recently uploaded packages and SFS files: Info and download instructions: >main post.
[url=http://murga-linux.com/puppy/viewtopic.php?t=117546]Fatdog64-810[/url]|[url=http://goo.gl/hqZtiB]+Packages[/url]|[url=http://goo.gl/6dbEzT]Kodi[/url]|[url=http://goo.gl/JQC4Vz]gtkmenuplus[/url]

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#269 Post by don570 »

Here is the latest GIMP 2.9.9 portable app

It worked in fatdog64 710 (except for bump mapping and displacement)

https://www.gimp-forum.net/Thread-Porta ... -for-linux

____________________________________________________

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#270 Post by don570 »

GIMP 2.10 appimage found here...
https://github.com/aferrero2707/gimp-appimage/releases

I have solution for gmic plugins if you have trouble with these.

Install libxkbcommon

http://distro.ibiblio.org/fatdog/packag ... 6_64-1.txz
____________________________________________________

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#271 Post by don570 »

I wrote a timer/alarm clock for fatdog64
Allows multiple alarms to be set easily.
mp3 file can be played to wake you up in morning.


Explained here....
http://murga-linux.com/puppy/viewtopic.php?t=112410

EDIT:
Available:
ptmtimer-2.3-x86_64.txz
https://drive.google.com/open?id=1PJwrt ... gTETcsiArq

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#272 Post by don570 »

I wanted to do morphing of image so
I made a lazpaint package for fatdog64 710
by converting a deb package.

Available:

lazpaint-6.2-x86_64.txz
Size 2mb
https://drive.google.com/open?id=1jf-KT ... gmsc-AAb-E

________________________________________________________

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#273 Post by don570 »

Note :

After installing audacity ---> to find dependencies that need to
be installed type ...

Code: Select all

ldd /usr/bin/audacity
________________________________________

User avatar
don570
Posts: 5528
Joined: Wed 10 Mar 2010, 19:58
Location: Ontario

#274 Post by don570 »

An alternative to turbo VNC is available...

https://aur.archlinux.org/packages/realvnc-vnc-viewer/
Instructions : Type the address and window number i.e.

Code: Select all

192.168.1.103:0
__________________________________________________________

User avatar
smokey01
Posts: 2813
Joined: Sat 30 Dec 2006, 23:15
Location: South Australia :-(
Contact:

#275 Post by smokey01 »

Wifi driver for Realtek rtl8812au chip set. Compiled for k4.14.12.
http://smokey01.com/fd720/packages/rtl8 ... 6_64-1.txz

Post Reply